91 modeli
As many do, I broke my balsa motor mount and need a stronger one. Similar to others I found, but using M3 threaded inserts instead of nuts or direct threading. Adapts to my motor plate (the stock one) at 16mm x 16mm.
Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
AtomRC Dolphin mounting system which interfaces between the balsa insert and foam, providing 3 x M3 6mm mounting holes. The greater goal is to have an aerodynamic mounting system to affix to the empennage which provides a universal…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just some parts as I make them for my Penguin.
***Update Oct. 28 2025*** I now include the stock vtx plate exact replica, STL and STEP files included This is a model of the atomrc penguin's plastic nose that screws on to the front. You can print one in any color to accent your…
A hugely improved motor mount for the epic AtomRC Dolphin FPV plane. It fits tight into the motor wire channel, adding much more mechanical stability so it won't just pop off on landing. It also actually has enough space for the screws to…
this works very well. my build: velox 2306 1750kv motors gemfan 6042 flash props spedix 30a esc stock motor on rear with 5126 lr prop gdw ds 041mg servo speedybee f405 wing cyclone gps/mag ELRS walksnail molicel p42 4s1p pack mid boom…
bottom plate meant to be glued to the base of your wing in some way. I have used 5 dots of hot glue. 4x m3x4.2 insert nuts needed 4x M3 6mm screw needed
Rear Skid Your choice which material will you use to print it. I did test petg, pla and ptu. I think best idea is to print it with tpu, becouse its easy to install, its flexible, so it ll fit well to the epp. Just squeeze IT ;) If you…
The AtomRC Dolphin motor mount is pretty weak, and barely glued in. This mount replaces the stock wooden one, with an insertable mount. There is an included 19x19mm plate which attaches via m3 bolts and screws into nuts on the mount. Best…
After losing my front hatch and seeing that a model is not available, I have made one. Hopefully it will be useful for someone out there. I have printed both hatch pieces in LW-PLA (3-4% infill, vertically from the cut between the pieces…
gets camera out off the tip of the nose. matches stock nose for vtx mount
thanks to to “P.I. Engineer” for all the work, please give him a like.
AtomRC Penguin DJI O4 Pro Nose - can be printed in TPU Original by https://www.printables.com/@PIEngineer_580794 O4 pro mod by https://www.printables.com/@FMandel_11590
This kit is a mixture of remixed parts and original. The antenna mounts and O4 camera sleeve are in TPU while the motor mount is ABS with 30% infill and the rest is PLA with 2 walls and 5% infill. Both hatches were printed at fifty degree…
This is a tray intended to make for a cleaner mount of the Walksnail VTX onto the Atomrc Swordfish. It fits into the fuselage using the stock nylon screw, and holds the transmitter, as well as the antennas. The transmitter is placed high…
I lost the tape that protects the motor wires, so I've designed this simple model to be glued into place
--- update as of 170824 --- V2 is here: https://www.printables.com/de/model/977779-atomrc-swordfish-dji-o3-mount-v2 there is a remix by @NeariX_1729854 if you like v1 better than v2:…
I fully designed this in Solidworks from the ground up to convert the slide in style Gimbal v2 to a drop in style Gimbal. There are 2 versions. One with threaded insert option and 1 you screw straight into plastic. You will need to…
incase you need a quick replacement print in PETG DO NOT PRINT IN PLA, any kind of PLA, don't do it.
Made for DJI O4 Pro Air Unit
UNTESTED (but there's also source files so modifying it should be easy) I haven't actually received my dolphin in the mail yet, so my impatient ass made this while waiting. I know the GO 3 mount will fit though, I've used that part before.
Replacement Hatch for the AtomRC Penguin Airplane Made to contain the Vifly Finder 2 Beeper Module
Made my own pan servo for the Feetech FT90M servo What you need -Feetech FT90M servo -Epoxy -m2 x 20mm m2 -CA glue -PETG -2 screws to screw the servo in to the 3dprint (screws are in the servo package)
Penguin ATOMRC ESC cover spare to replace original one. Print it splitted in two parts, it willmake esaier the supports removal. You will have next to glue the two parts by using the rib surface to apply glue. I also printed it in PETG…
Atomrc Dolphin ESC cover (low drag + high airflow) by Aspir3 is a fantastic esc cover and keeps the esc icy cool, however when landing in wet grass, or worse, snow, you get an esc bay full of water or packed with snow. Not ideal. This…
Holes are 3.2mm for M3 bolts, spaced on 34mm diameter. Slots for nuts are 5.6mm I printed this in PETG with 20% infill
One side of the wing tip ripped off so I designed this one. I also uploaded a template for a precise cut at the right spot. It is not perfect but better then flying with a broken tip.
FPV canopy for AtomRC Swordfish with 9g servo mount and designed to house DJI O3 air unit. It will also work with any other VTX since you can use zipties to mount VTX in place. Features: 9g servo mount Outside VTX mount for ultimate air…
Atomrc Dolphin elevon Three different types: Plane elevon, you need to glue in servo horn andduct tape elevon to main part of the wing plane elevon with place for connectors to the wing (use 16mmx28mm) With place for horns and connectors…
Wing root endplate for the AtomRC Killer Whale which allows you to mount a JX9 connector. The connector can be removed provided you don't glue the foam cover on top. The original foam cover can be used but requires a small amount of…
A motor mount and custom low-profile fairing for the Atom RC Killer Whale motor pods. The motor mount improves the cooling of the ESC area, and the fairing should be compatible with the original motor mounts (not tested!) The fairing…
I wanted for my Swordfish to have FPV camera with maybe even an instrument panel. After a bit of tinkering, a couple of prints I came up with this. The canopy is designed to be printed as one piece, I used 1wall with 5 - 8 % infill. It…
Print with LW PLA or your preferred filament. I used Inland LW PLA Orientation is laying so camera is up 2 shell 15% infill 4 top layers 4 bottom layers Slim Tree Support Buy me a coffee if you want, thanks for the support!…
A nose for AtomRC Dolphin with space for Runcam Thumb Pro and a 19mm FPV camera. The antenna version has holes for stock Walksnail antennas (for the original V1 VRX with 2 antennas). There is also a hole for a ziptie to hold a VTX (or…
Simple remix of the original base plate, which adds holes for M2 nuts for “custom” mounting of anything. Also made a simple mount for the SpeedyBee F405-Wing flight controller.
Atomrc Dolphin FC Mount modified from GizFPV clean build to accept different electronics Atomrc F405Navi :FC CRFS Nano Pro :RX BN220 :GPS Skyzone TX2500 :VTX
This is a "replacement" canopy for AtomRC Swordfish. This is just plain canopy with no mounts or something. It has enough clearance for 4s 21700. This model is not meant to be printed, rather, use it as a baseline for your own mods. Add…
Batter Plate / Tray for the Dolphin Pro. Its not 100% perfect but sits 99% tight in spot and in the Corners. Printed with ASA CF 80 & infill. Rock solid. Leave a Like and have a good flight :)
Had a small crash and tore off one of the front winglets. I couldn't find one so I made this 3d builder using another file (I'm not the best at this). I sized it perfectly and then just cut the rest of winglet off then made a small slot…
A langinggear for the AtomRC killer whale. It fits in the designated spot in the fuselage. You need M3 bolts and nuts to srew it in the fuselage. All the holes for the carbon rods are designed exactly 3mm so for easy assembly i recomend…
Originally made these to help protect the motor but turned out to be more than that. Enjoy! Different covers. From completely closed off to a tail fin skid plate. Choose between a thick or thin skid/fin Printed these at 0.1 layer height…
A basic mount for the DJI O3 VTX. Screws into the existing gimbal mounting wholes with the stock screws. The DJI o3 VTX is then cable tied on. There is a return channel for the VTX cables. The USB-C port should still be accessible if the…
This design is based on using parts from the original Atomrc one axis gimbal. The quick-release feature for easily transferring the gimbal between multiple platforms remains intact. The baseplate and servomount are printed side by side…
Remix of szymansk design allowing for a heat sink to be placed on the ESC and easier support material
the upper part also works with my tail cam mount for the volantex phoenix v2 2000: https://www.printables.com/de/model/908679-volantex-phoenix-dji-o3-tail-mount the upper parts are actually identical improvements: better look :D magnets…
3d printed cover because atomrc didn't manage to send me some
One degree motor adapter for dolphin. Tpu. Mount such that it's notch down. Print with PETG. Category: Other
“I f you enjoy my work and would like to support me, consider contributing .” This is my UPI ID — mahendraguptha.97@oksbi ATOMRC 3D Print Pan Tilt Servo Camera Gimbal For Bottom Base Mount For Mini Talon
Custom flight controller tray and attachment rails for AtomRC Killer Whale. The rails are glued into the middle slot and should be pushed as rearwards as possible (see images). They are designed for M3x6mm threaded inserts with an OD of…
0.2MM Layer height.No Supports
Simple camera mount for 14mm FPV cameras like the Runcam Phoenix 2 Nano on the AtomRC Swordfish.
Landing gear alternative insert for the AtomRC Killer Whale that allows for flush mounting of the combined Matek Systems Optical Flow and Lidar sensor. As a fixed-wing, only the lidar is of use, so a hole for the lidar sensor is included…
Skids for the AtomRC Killer Whale fuselage to allow for belly landings and belly takeoffs without damaging the underside of the aircraft. The provided file is cut in half to fit on a Prusa Mini bed, and can be mirrored to print the second…
An old design that i've made, to install a bigger motor on my dolphin wing. Used Esun PLA+ with 100% infill. Strong materials are recommended, even if I didn't have any issue with it braking. Also add some glue to the back, the small…
As above, mount for action 2 to dolphin fpv wing E: today while flying was 32 Celcius and my dji action 2 overheated- designed more cooling version 2 options: to print with TPU to print with polilite pla and install camera in tpu insert.…
AtomRC Dolphin esc plate. Print with no top layers or bottom layers to use your infill as ventilation Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG…
After a crash with my AtomRC Seal, the latch that secures the hatch was nowhere to be found, so I modeled up this little replacement. you need: M3 threaded rod cut around 35mm. I cut down an M3 bolt I had 1x M3 nut 1x 7/32"x11/16"…
Remix of FC tray from "Ultra clean Atomrc Dolphin build - GizFPV" allowing for full customization of parts/placement. Shout out to GizFPV as I was just in the process of making a FC tray that fits the entire bay when he uploaded his.
Designed for the TF-Luna Lidar used with a Atomrc swordfish modified for VTOL. Seperate file for wheel delete without lidar sensor. Support my work: All of my models are available for free. If you'd like to show your appreciation,…
Tilt Mount / Nose Cone for the Atomrc Dolphin Only tried with analog so far but would probably fit a digital camera too. Nose cone should provide ample airflow into flight compartments Requires 1x 9gram servo and slight modification to…
wing protection during landing for atomrc swordfish. Glue from below closer to the end of the wing. Prevents contact with the ground and prevents it from getting caught on branches. https://youtu.be/00Q0_87mVUY
The larger of the 2 vortex generators on the dolphin pro.
An air-scoop / heatsink-mount combo for use with Aspir3's excellent AtomRC Dolphin ESC v12 cover - https://www.thingiverse.com/thing:5147951 Sealing the edge of the heatsink to the base with epoxy creates a watertight ESC cooling…
Gives you a little wiggle room for the mccx connector and the height of the GT2 itself. use a m2 nut on top to fasten down the attachment. I have really gone down the deep end on getting this gimbal to work with my gear, really should…
I think I ony reused the very precise surface decribing the fusleage shape and the cutout-shape. All credit goes to Gizfpv. As he shared his fusion-files, I'll share at least a step-file since I'm not working with fusion.…
Adaptation of existing design to get lighter installation, possibility to use 21700LiIon pack, and good air cooling flow and protection for DJIO4Lite module. 3 Rear ducts on rear panels improved a lot the cooling by creating succion to…
The provided files only support the O3 Air Unit, this is a mount for the O4 Air Unit Pro. Friction-fit, but a strap through the existing holes should work. I'm just a beginner with CAD so may need a touch up by someone more experienced.…
Atomrc Flying Fish Fixed-wing Aircraft This model is used as motor mount “I f you enjoy my work and would like to support me, consider contributing .” This is my UPI ID — mahendraguptha.97@oksbi
Print with LW PLA or your preferred filament. I used Inland LW PLA Orientation is laying so nose is up 2 shell 15% infill 4 top layers 4 bottom layers Slim Tree Support Buy me a coffee if you want, thanks for the support!…
Gopro shape for the insta360 go 2 to be installed into the atomrc dolphin nose. Requires cutting the gopro nose foam to fit the insta360. Print vertical with lens at top with supports Print Settings Printer Brand: Creality Printer: Ender…
I'm not fond of using only double sided tape to mount flight controllers to airplanes fuselages, so this FC tray mount for the AtomRC Beluga addresses this problem. The mount is designed only for the AtomRC F405 Wing Mini and its mounting…
High-accuracy 3D scan of the stock front canopy (hatch) for the AtomRC Dolphin FPV plane.
I printed it in PETG, 0.6 nozzle and 20% infill. Any nozzle size will do. No supports required. Printed standing up as it would be mounted to the servo Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Take your FPV experience to the next level with this custom-designed mount for the ATOMRC Swordfish. This all-in-one mounting solution is specifically engineered to cleanly integrate a Walksnail Avatar digital VTX, the FPV camera, and…
The “nut” replaces the magnets and is glued in. You need to create a hole and cut into the hole horizontal and vertical slits for it to get a grip. It is designed for M3 screw (it screws directly into the plastic). I suggest printing the…
Holder suited to fit 19*19 cameras on front of AtomRC Swordfish. Prints without supports.
Its old on with two Rubber Band + 2 Additional Magnets if you want. Its an old design I made. It worked. Definitely some possible improvement, but work well. If you want to change some stuff, make a copy here - the ONSHAPE link
Self explanatory, print however you like but would recommend making them tough for landings. The measurements are not 100% exact but they fit
I made a mount for the Speedybee wing mini flight controller for the AtomRC Dolphin base to fit the "AtomRC Dolphin Base Plate For SpeedyBee F405 Wing" ( https://www.thingiverse.com/thing:6070334 ). Not a remix, but I figured it be easier…
This is a replacement antenna mount designed for the original Hurricane 5 antenna holder. I built it specifically for the AKK Race Ranger VTX, which uses an MMCX‑to‑SMA pigtail, but it should work with any similar VTX setup. The mount…
This is twin motor conversion of AtomRC Seal G1500 More power, easier takeoff and more efficiency! There you can find an aerodynamic placeholder for the old motor mount, motor frame, motor plate and a decorative cover for the ESC. There…
This design allows you to position the DJI O3 perfectly on the canopy plate, providing an expansive, wide-angle front view with only minimal prop visibility at the edges. Integrated with a 9g PAN servo slot, it delivers a massive 270° of…
The file by DJI Silesia ( https://www.printables.com/model/1137138-atomrc-swordfish-canopy ) was used as a basis. Direct replacement for the AtomRC Swordfish canopy with mounts for the DJI 04 Air unit. Four M2 thread inserts are required.…
Mount for the bottom of the AtomRc Gimbal v2
Device using 80x80x10mm USB cooling fan, and power bank in order to get fully autonomous device and be allowed to cool the DJIO4Lite on my penguin ATOMRC even on field. It allows to wait for GPS fix with DJIO4lite powered on under hot…
Lets you mount your AtomRC gimbal v2 to the reptile dragon 2. use a m3 heat press insert to secure down the gimbal
DJI O3 Nose for the AtomRC Dolphin V1. Blank nose also available for customization. Fuselage mounting plate from https://www.thingiverse.com/thing:5365305 Inspired from: https://www.thingiverse.com/thing:6577267
I lost the tape that protects the motor wires, so I've designed this simple model to be glued into place
I made a mount for the Speedybee wing mini flight controller for the AtomRC Dolphin base to fit the "AtomRC Dolphin Base Plate For SpeedyBee F405 Wing" ( https://www.thingiverse.com/thing:6070334 ). Not a remix, but I figured it be easier…
I'm not fond of using only double sided tape to mount flight controllers to airplanes fuselages, so this FC tray mount for the AtomRC Beluga addresses this problem. The mount is designed only for the AtomRC F405 Wing Mini and its mounting…
Self explanatory, print however you like but would recommend making them tough for landings. The measurements are not 100% exact but they fit
