Liczymy pasujące modele…
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
Wydruk około 13,31 €–16,27 € nettoWstępna wycena jednego wariantu
NEW 3 face corner bracket: https://www.printables.com/model/1390968-strong-corner-bracket Simple 55 × 55 × 15 mm corner bracket designed for M3 screws. Easily scalable for larger applications. Features: Pre-sized for M3 screws Compact and…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…
Wydruk około 10,40 €–12,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
The Strong Corner Bracket is designed for reinforcing corners where three panels meet at 90°. With dimensions of 50 x 50 x 50 mm , it includes screw holes suitable for screws with a diameter of 3–4 mm . To reduce material usage without…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
A modified version of Fabian's DIN Rail Bracket to push some M3 threaded inserts into the holes. The holes are now 4mm wide and I added some material around one hole, so the inserts won't stick out.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
Wydruk około 9,57 €–11,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Need to mount your shiny TS4 under your desk or monitor stand? This print will do the trick. Once the bracket is mounted, the TS4 can be easily slipped in and out via the integrated retention clips. Simply attach the cables to the back…
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
A wall bracket to securely fasten your LACK Prusa Printer Enclosure V2 – with MMU2S support to the wall to stop it wobbling while printing, but still leaving enough room for the filament to enter the back of the enclosure. (I have a 3…
Wydruk około 5,27 €–6,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: The "remix_drip_bracket_7.2" version (shown in blue) fits better and centers the build plate over the resin vat better. I will remove the earlier version to prevent any issue of downloading the wrong file (earlier version shown in…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simpel modern looking bracket for angled (15°) furniture legs. This model in particular fits 30mm round wood rods. Tho, keep in mind due to filament shrinkage while printing and manufacturing tolerance of your chosen leg…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
The Dyson vacuum cleaner toy is a great thing to keep your child busy while using the big vacuum yourself. But most of the time this thing just keeps lying (and flying) around in our closet which is quite annoying. So I made a wall…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
TP-Link Tapo C200 is a nice IP camera from TP-link. This is a bracket allowing it to wall mount in upright or downright position.
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printet on prusamini with low detail and 15% infill
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Caliper bracket for Ikea skadis or similar. The hooks have an end to end spacing of 84.40mm. If you want to place the hooks yourself I leave you the following addresses. Original model of the bracket:…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Simple cover for behind the lcd screen.
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
Plate locks the Nest doorbell down, replacing included metal plate. Use the key: https://www.printables.com/model/466189
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Hyte Y60 Fan Bracket (3x120), I made the second version of the https://makerworld.com/en/models/138628#profileId-151004
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Like this mount? Check out our brackets too! https://www.printables.com/model/1083606-govee-compatible-bracket-for-permanent-outdoor-lig Brackets to mount the power brick and switch brick for Govee Outdoor Pro lights. Suggest printing…
Wydruk około 5,69 €–6,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
M.2 SSD mounting plate for DELL laptops.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…
Wydruk około 9,15 €–11,18 € nettoWstępna wycena jednego wariantu
I designed a PCI full height bracket for my LSI 9211-8i HBA card since it didn't come with one. I used two M3x8 screws that can cut their own threads, but you can also use M3 nuts to secure them (I did). The two holes are spaces 54mm…
Wydruk około 95,57 €–116,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This model was essentially copied off of a standard hanging bracket from my own mini blinds that I own. The larger holes are there to allow a drill or screwdriver to reach the smaller holes for hanging. The holes on all sides are so that…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compact build plate mount for your Saturn S to let excess resin drip off on an angle into your vat. Changed the original design to fit a Saturn S. Original design is too big and it doesnt fit onto the arm. Bracket now fits snuggly to the…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
240 x 210
Wydruk około 10,83 €–13,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Logitech charges about $150 for the metal wall mount plate for the Logitech TAP tablet for Teams Rooms. We couldn't wait that long so I designed one and its so good we're using them all around our buildings now (10 units). This alone paid…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bracket for mounting a Starlink Gen 3 router
Wydruk około 3,32 €–4,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Microserver Gen8 SSD bracket for four SSD's I've created this bracket based on thing:1279920 from Oliver Oswald . I initially had above printed in 2017, but the moment i got it i was displeased with it because of how it was designed. It…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena jednego wariantu
This is a replacement clip for a Ford F-150 sun visor. My dad's broke so I modeled up a replacement. It broke in the winter, so I printed the version one in PLA as it was cold enough outside that it wouldn't melt. When summer came, I…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
This is a simple bracket designed to keep your screen from sagging with broken hinges. It is directly inspired by this design on Hackaday because the original files are no longer available. Print Settings Printer Brand: Prusa Printer:…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…
Wydruk około 2,80 €–3,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently added a heat pump to our pool, so I had to redo some of the piping and needed some brackets to hold them in place. Off the shelf brackets didn't work so I made my own ones and thought I'd share them, in case someone has the…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
A wall mount bracket to Click-in the Bosch AL 1115 CV battery charger, with an additional cable holder to roll up the cable when not in use. To take the charger with you, just click it out of the bracket. Use three 3.5mm countersunk…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Potřeboval jsem zpevnit stůl z laminátových desek. Tištěno z PLA ,velice pevné.
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Leviton Structured Media Cabinet Bracket for UniFi Switch Lite 16 PoE. Print instructions Recommend using Supports to support the lip that holds the switch.
Wydruk około 7,83 €–9,57 € nettoWstępna wycena jednego wariantu
This was designed in tinker cad and is being used to hold signs ontop of multiple mailboxes. It was printed in PETG for outdoor durability. It has a support built into it for stability.
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple bracket for the Netgear GS108E . It has small holes so you can see the power LED and retain access to the factory reset button. It fits very snugly and you'll have to relocate the rubber pads slightly (or you can remove them…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Remix of Ikea Lack enclosure reinforcing bracket that I recreated from scratch in FreeCAD to be parametric with countersinks for Grip Rite exterior screws. Screw part number: PTN114S1 https://grip-rite.com/product/grip…
Wydruk około 21,66 €–26,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 02/28/25. – A few people have had issues with this fitting their vehicle. It was designed to fit my Nov. 2023 R1S VIN 23 XXX. I don't know whether this is related to a change in the tow hook size by Rivian in later builds or a…
Wydruk około 6,83 €–8,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
Wydruk około 3,70 €–4,53 € nettoWstępna wycena jednego wariantu
With the way my enclosure lights are set up, the default thermometer mount was hard to read. This is a remix of the official "Adjustable Thermometer bracket for Original Prusa Enclosure" that instead mounts to the top of the printer…
Wydruk około 1,76 €–2,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple clean looking Bracket for a shelf 13x13cm in size, Pretty stable with 15% infill. // Ein simpler Regal Winkel für Regale, 13x13cm groß, Ziemlich stabil mit nur 15% Infill.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
Do you know “Flying” power strips because the cords are too short or clutter on the floor. With this easy to print wall bracket you have a better "home" for a power strip. Fix it with two or four screws on the wall and place a suitable…
Wydruk około 3,12 €–3,82 € nettoWstępna wycena jednego wariantu
Nachdem eine Halterung unserer Kleiderstange zerbrochen war, lagen die gesamten Kleidungsstücke unten im Kleiderschrank. Das passiert natürlich an einem Sonntag, alle Geschäfte sind geschlossen und wir wissen nicht, ob es überhaupt Ersatz…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: (2024-11-25) I have added a version of the underslung right bracket with a full protective cover for the PD board. I have previously created a 22.5° remix of the MMU2 brackets due to my use of a cabinet and feeding from above.…
Wydruk około 2,34 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Making your own eurorack case? Then you might want a 1U row! Modeled this bracket based on the Intellijel 3U Z-Rail brackets so it's sized to work with M4 screws. Holes are countersunk as well for a nice flush mount. Attach the bracket to…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
I used wood screws and mounted it directly to the wooden board. Power supply uses similar bracket. Also cables are held up with zip ties using this easy print: https://www.printables.com/model/205265-cable-management-easy-solution
Wydruk około 9,30 €–11,37 € nettoWstępna wycena jednego wariantu
Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Update! Added a version 2.1 which attach with a M2 or M3 screw instead of snapp on. Found that the first version easily breaks if you hit the fender with something in combination with vibration from riding. 2.1 version slightly thicker in…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards. This is a remix of rasarmg's “PCI Bracket Generator” on Thingiverse , and is only a very small addition to it. If you…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Thanks to reddit user hclrke for providing his design so I could fine tune the hole spacing and vertical supports. Used M3 socket cap screws of suitable length to mount the plate to the Mele as well as to mount this assemble to PPBAV2. I…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a MTB-bracket for your GoPro. Diameter 38mm. 2xM5 nut and M5x20mm screw is required.
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
I designed this part in onshape for mounting rear light (link in below) to my bike saddle. https://amzn.eu/d/aiM4XWi if you want to customize my design you can access the design here…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night. Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws. One of the…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
The default Reolink mount is designed for mounting to a wall with masonry screws or wall anchors. That's fine, but some applications need a clamping surface instead. This is particularly the case if you want to mount it onto a gutter, on…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My settings are provided in the .3mf file or .gcode. The main settings were: 0.4mm nozzle Overture PETG 4 perimeters 0.3mm Layer Height 25%/15% Cubic infill (more dense near load) Print two brackets per build plate (or 3 if you'll do two…
Wydruk około 7,66 €–9,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
bike bottom bracket 5mm spacer = instead of two single spacers BSA BB
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
Both sx and dx top bracket upgrade for Geeetech i3 Pro W/B/C
Wydruk około 5,48 €–6,70 € nettoWstępna wycena jednego wariantu
This is a bracket for the Kulp Lights K8-Pi v2.0 (2024). I wasn't able to locate any bracket for this controller, so I hope this helps someone out. The K8-Pi is an 8 Output Falcon Player (FPP) Cape for Raspberry Pi. I printed with Jesse…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
VTX Bracket for FlyLens 85 with Walksnail Mini+Moonlight 4K Upgrade Kit
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Bracket designed for my SUNLU FilaDryer S1 Plus Drybox. So that I can place it on my Ankermake MC5. Please note that placing this bracket is tight, but it all fits very well. You can move them once you have placed them. Top Bracket is…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
I was looking for a commercial made vinyl siding bracket to mount an Arlo wired video doorbell but could not find one. So I made one. I’m including a step file for anyone that wants to mod this, should make it easier. I used 4 perimeters…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This improved version of the acoustic foam mounting bracket has been improved by adding in a structural beam to keep the mounting clamp from sagging under the heavier load of wider and denser acoustic foams. In combination with 3M Command…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Der Lochdurchmesser des Halters ist 6,1 mm. Zur Wandbestigung habe ich eine Spax-Schraube in 6x120 mm benutzt. The hole diameter of the holder is 6.1 mm. For wall mounting I used a Spax screw in 6x120 mm.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.15 approximately 18 hours at 75% speed 0.20 about 15 hours at 75% speed nozzle 0.4 support needed gcode included
Wydruk około 12,43 €–15,19 € nettoWstępna wycena jednego wariantu
A wallholder for a ladder
Wydruk około 22,51 €–27,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My mount for my Hammerhead Karoo2 broke and I printed the version from c10l, but recognized some necessary improvements to the fit of the Karoo2. The tension of the PETG is a little bit increased by lifting the locking latch and I…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
gcode 10 hours is without brim gcode 12 hours is with brim
Wydruk około 8,53 €–10,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Minimal design. Maximum strength. 📐 Dimensions (for your model page) Plank size used (based on your drawing): • Width: 12.6 cm • Height: 8 cm • Length: Optional / customizable Slot in the printed part is designed to match: • Slot width:…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena jednego wariantu
This small bracket can be mounted under a monitor shelf to get your dock right front and center without taking up desk space. To get the other side of the bracket, simply mirror the print in your slicer of choice Instructions: Insert dock…
Wydruk około 3,63 €–4,43 € nettoWstępna wycena jednego wariantu
this Object is a Bracket for a Feiyutech Gimbal because the GoPro 10 doesn't fit in the Original Bracket
Wydruk około 1,09 €–1,34 € nettoWstępna wycena jednego wariantu
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
This bracket was created for RYD (Responsible Young Drivers) to be used on their 3D VR distraction bicycle. The leap had to be attached to an Oculus Rift S without obstructing its cameras. Furthermore the USB cable attached to the LEAP…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Print Instructions: You have two options: ⬢ Use the presliced G-code and print it on your MK3s+ ⬢ Slice your self using the following settings ⬢ Print settings: 0.20mm QUALITY ⬢ Fillament: PETG (tested on Prusament) ⬢ 15% infill Step1:…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement for missing 2.5" drive caddy on the back side of the motherboard for the Fractal Design Define C case. Modelled using a case bought in 2017. I printed it in two parts with the middle drive holding the two parts together.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a shortened and improved version of prusa lcd support brackets to fit in a enclosure. They are 13mm shorter and have a little rip to tighten the fit with the lcd display (no rattle from the display anymore). To mount the assembly…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Larger Brackets for Phones up to 1cm thick. 4cm wide cut out in the bottom bracket to fit off-center charging ports Only the changed bracket object files are hosted here. Visit the original model posting by @ Duane to get all the…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two vinyl wall brackets for holding played records
Wydruk około 5,29 €–6,47 € nettoWstępna wycena jednego wariantu
I wanted to mount stuff to the top of my Radiomaster MT12 radio, either for filming and being able to operate the controller two handed (it takes practice!!) or just to mount an FPV screen. Or maybe both??!! Hey, I'm just providing…
Wydruk około 2,81 €–3,44 € nettoWstępna wycena jednego wariantu
