148 modeli
This mount allow the mount of the Skadis panel on the back of a Bror System. It works with M3 inserts. I have seen others systems but I was after a design that is mostly hidden behind the panel. It prints well without supports at .2 mm…
Wydruk około 2,83 €–3,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE Shelf support holder I added optional holder brackets for the two additional support beams (see instruction pdf page 1). Those can be used when the supports are not held securily by simply quenching them into the frame. If used,…
Attach an Ikea SKADIS pegboard to the side of an Ikea BROR shelf. Compatibility The 3-hole variants should work for any SKADIS/BROR size combinations as long as the SKADIS board is wide enough. I've tested the 3-hole model using a square…
This is pretty simple, I needed a trolley to be able to get some tools out and move them around but I also had this spare IKEA pegboard. A couple of iterations of 3D printed mounts I have combined the two like an IKEA Voltron if IKEA was…
There are two models - “high angle” could has bigger incline of the hook so could be more secure.
This simple hook uses gravity and balance to hang items like headphones, cables, light strings, whatever you want from IKEA BROR metal shelving unit brackets. Print in PETG or PLA or ABS, no resizing required. Higher infill for heavier…
Few web search closed on the IKEA BROR system. As always, IKEA supply cheap and very efficient furniture. As before with the LACK table, IKEA can supply a good solution for bigger printer enclosure. The BROR shelves system is composed of…
Print with no support and attach with M5 bolt and square nut (included in the BROR package). This one fits on the right side. Flip in the slicer to get the mirrored version. IKEA BROR shelving system is an excellent system to house MK3,…
Clippable Hook for IKEA BROR Workbench (303.332.86) plywood top. The dimensions of the stell frame of the plywood top are different from other BROR shelves, and thus the clip will only fit on the plywood top. Printed with eSUN PLA+HS. The…
Wanted to add wheels to my IKEA BROR system (65x55x190cm; model 294.717.59 in my case; uses BROR posts model 103.332.87), so made this mount. No modifications needed in BROR system itself. Printed in MK3S+ from PETG, 0.3mm layer, 4 walls,…
This simple model allows to mount Filler on both sides of IKEA BROR shelving unit in both directions - parallel or facing back of the unit. There's no left/right version so it's easy to switch to other mount point. You will need at least…
I printed this with PETG at a .2mm layer height with 100% infill since it's so tiny. I haven't had any issues with it it. You can probably get away with less infill.
This object lets you install casters to a Bror workbench. It is designed for 1-7/8" (48.5 mm) x 2-9/16" (65.5 mm) casters. The holes for the bolts are 2-1/8" (54 mm) x 1" (25 mm) apart. The bolts I used are 1/4" (6.25 mm) in diameter,…
Most chute designs around are too thick, and the printer must be placed a fair distance away from the wall for clearance. The slim chute by AdrianGarside worked really well, and I created the rest of the models based on his design. I…
IKEA BROR Shelf Support Cable Clips These small clips allow you to attach cable/zip ties to the side and center support brackets on an IKEA BROR shelving unit.They are very useful for securing wires that you want to run along under the…
This custom-designed 3D printable mount allows you to securely attach a 22"x22" IKEA Skådis pegboard to the side of an IKEA Bror utility cart—without the need for any additional hardware. It is fully compatible with the standard fasteners…
This shelf was added to IKEA BROR WORKBENCH to use it as a desk. Wood: 18 mm thick pine wood panel. Size of the panel: 109 x 30 to 35 cm. Wood stud: 2 pieces of 3,4 x 1,8 x 30,8 cm pine wood with R 6 mm edges (to be made with a router).…
This adapter makes it possible to mount the Skadis panel on the Bror shelf (both from IKEA). It is a two piece part but requires no additional materials such as glue or screws. The two parts fit together with a dovetail joint, allowing…
The bottom part has been slightly widened and a bend has been added.
Print with no support and attach with M5 bolt and square nut (included in the BROR package). This one fits on the right side. Flip in the slicer to get the mirrored version. IKEA BROR shelving system is an excellent system to house MK3,…
This custom Gridfinity base is designed specifically for the IKEA BROR drawer (84x54cm) . It consists of several grid modules, with two integrated padding sections on the left and right sides, as well as at the back. The measurements are…
Prevents IKEA Bror shelves in place, preventing them from shifting and adding a lot of rigidity to the system. Small bracket secures to shelf corners and locks the shelf support in place. Two versions available: V1: M4 heat-set inserts +…
Spool holder for an Ikea Bror cabinet. Simply use two broomsticks to make the spool holder. Then print the slightly modified Mini Base spoolholders to set on top of the broomsticks. The Bracket part needs to be printed twice. Also the…
A remix of ExpiredTapWater's mount, modified to align with the holes for a 56x56 SKADIS board and the BROR's side panel. Holes are sized for M4 heat-set inserts. Main modification was to move the hole a few mm to the right to align with…
"BROR Filament Spool Holder" is an additional part that allows you to fix the "UNIVERSAL FILAMENT SPOOL HOLDER" on the BROR bookcase by IKEA. (Without that text shown at the top) All you need is: 2X Original black M5 bolts with nuts…
Bror Hooks - pick your favourite :)
This is an adapter to install a Skadis plate onto a Bror shelf. You can use the original screws and nuts to attach it to the top holes of the shelf. I added the wood plate myself but this works as well with the metal or wood shelves from…
Holder for Pizza Peel Holder fitting to the Bror Ikea rolling table. Works nicely with Ooni peel and other unbranded turning peel I own. Print using supports with both extending parts facing the build platform. I printed using PLA, 20%…
This is a adjustable foot for the Ike Bror shelf. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 20% Filament: Polymax Pla Black Notes: M8 nut Wascher m8 / 24mm / 2 mm Add a…
Attaches to the 15" or 24" Bror shelving unit. Uses M5 screws to attach, something smaller like M4 might leave a little bit better clearance. Designed for 1 1/8" dowel. Designed around the bed size of the X1C. Printed in white PETG for my…
I created this toolholder so I can keep few of the most commonly used tools out of the main bench (and keep the sharp knifes out of kids reach). It attaches to existing places on IKEA Bror. If you print it upside down it it doesn't…
This is an adapter to mount SKADIS pegboard to the BROR cart. Print two pieces, one of them mirrored on the X axis.
Pretty simple - We wanted to have my tools close by and organised so we copied the IKEA SKADIS pegboard and redesigned it to mount to a BROR shelf. There are two kinds: CORNER sections - These are for a single BROR shelf. Add them to each…
Hi, As I had to space my shelf away from the wall, the original spacers that were provided with BROR did not fit as they are too small. Modelled them to fit into the free bold hole and add some window gasket between this sandwich like…
This model allows to mount Filler on front of IKEA BROR shelving unit in both directions. There's no left/right version so it's easy to switch to other mount point. You will need two screws and nuts to mount it (designed for M5). This is…
Hanger/hook for Bror storage by Ikea The number in the name is the width You need a m5 bolt and nuts You might also want to add some padding to protect the paint from scratch with some padded tape for exemple
The IKEA Bror is a great utility cart to use with 1 or 2 MK3S's. With the storage opportunities under the cart and the two shelfs, I designed a simple solution to store 5 sheets and have some drawers for storage (allen wrenches, screw…
A corner reinforcement for the IKEA Bror cabinet making it more stable and square. It fits in between the bars on which the shelf rests and can be attached with a M4 screw and nut to the original holes in the Bror cabinet. I have made two…
The IKEA Bror shelf system provides a frame with a number of attachment points for the shelves. Those attachment points can also be used to connect 3d printed containers or other holders. This model can connect to the attachment point and…
I've made this design to have more surface area on the floor, to limit marks on soft floors like wood or lino. Parameters Filament: SUNLU PETG Infill: 15% Wall: 3 Those settings worked greate for me. In my case it support max 100 Kg. For…
Press fit semi-circular cover for inner corners of Ikea BROR storage system. Can cover wires or be used as a diffuser like I am Diffuser Print Settings: Clear PLA Thinner layer lines = less transparent/better diffusion
Spacers for the back and sides of the ikea bror workbench drawers. Ikea link: https://www.ikea.com/us/en/p/bror-work-bench-with-drawers-black-pine-plywood-70494300/ Drawers are: 33 1/2x15 3/4x35" Inspired by the design for the larger…
I love the expandable steel sheet holder from Whity but I have my 3D printer in a IKEA BROR workbench. This workbench has its table to op some C-channel and that does not make for simple mounting of the sheet holder. So I made two…
Rill upgrade for your BROR table. The block will be attached by two M6 screws and nuts to the prepared holes in the BROR legs. RILL wheel can be attached by four M4 screws then.
I used 18mm wooden dowels for my setup. The holes can hold a 22mm rod.
Universal steel sheet holder for 10 sheets. Meant for IKEA BROR but can be installed on any vertical bar that contains matching mount holes or is made of wood. Advantages: can be operated with one hand good visibility of plate types…
In addition to the IKEA screws I needed only M4 square nuts (according to DIN562), but M4 hex nuts (type DIN934 or DIN439) should fit too. Resizing of holes in the posts with a 6.5mm drill necessary for better fit. Pressfit of M4 square…
The wood on the Ikea Bror cart is not thick enough to hold screws that will fix an extention box and support the weight of plugged-in power cables and adapters. So I designed three brackets to attach the extention box to the inside of a…
UPDATE (12/04/2024): I've been using these caster mounts for about two months now with about 125 lbs. of weight on the shelf, and so far they have held up well. I have attached two pictures of the shelf with casters in use just so you can…
A box / basket add-on that can easily be mounted on the frame of a Ikea Bror shelf. The B model will fit on every connection point on the shelf including the connection points that has a bolt that goes through it. The A model can not…
This is a spool shelf designed to be installed on the IKEA Bror Trolley. It uses the extra hole where a Bror shelf could be placed for the top layer, and requires drilling extra holes for the bottom layer. Alternatively you could just…
Note: This is for the plug-together shelving unit of the BROR family. You don't need it for the screw-together units of the BROR family (like the trolley or the workbench). In addition to the screws from the IKEA by-pack kit you need a…
FR (English below) Une solution assez économique pour surveiller en dehors de chez vous ou enregistrer vos prints avec votre imprimante installée dans une étagère Ikea BROR. Une caméra abordable, réglable en position grâce à votre…
Air filter upgrade for BROR Enclosure V1. Material and instructions for the Enclosure can be found here: https://www.prusaprinters.org/prints/34759-bror-enclosure-v1 This air filter should be printed and assembled onto the enclosure back…
Hello! This is the model of an enclosure I designed for the Ikea BROR shelving unit . I designed this to reduce the amount of dust that could settle on the Prusa XL, reduce drafts, and eventually to set up some air filtration system. For…
This strut can be used to stabilize the IKEA BROR (85cm width and 55cm depth) Category: Other
Made for Ikea Bror workbench, i made the Bench shorter so it needed some new feed/floor protectors. Its printed in Pla+ with normal settings. can be printed in every type of filamant.
Clamps the upright post and firmly anchors the shelf to the wall. Modified to use a M5 bolt with heat set insert and a #10 x 2" wood screw to attach to the stud in the wall. Then covered the screw. Printed in PLA with standard settings…
I used @PacoSebas_548699 excellent mounts to put a 76x56 Skadis in the back of my 85x55 Bror case. I also wanted to have the narrower 36x56 in the side of it, however that obviously wouldn't fit (too much space to bridge). So I remixed…
I recommend printing it with PETG or PLA Carbon Fixed with M3 Inlays and M3 Screws
Gedruckt in PLA, keine Stützstruktur notwendig. 20% Infill habe ich eingestellt. Die passenden Pins gibt es ebenfalls bei mir.
Summary I have cats, and they are curious when the printer starts printing. So I needed a way to keep them out. What started out as taping some plexi glass to my IKEA Bror shelf turned into this. We'll see where it goes from here.…
I didn't need a fully enclosed cabinet but I wanted to use 3mm plexiglass. I remixed the fusion file from oa1 and gave the holder a 4mm width. This keeps the plexi secure but also allows you to slide it out easily if you need to clean or…
I made this simple rack to sort the mess with the many different capsules. Its designed to mount it on the side of a IKEA Bror shelf as seen in the Pictures. You can also mount it on a wall or different places by using the mounting holes.…
This is a quick and dirty spoolholder for the Ikea bror underside reeinforcements Category: 3D Printer Accessories
Clips onto the shelf and stays snug. Strong enough to hang a backpack.
This is a paper towel holder that mounts directly to IKEA's Bror units with M5 bolts. I printed this in PETG.
Created with MK3S+, PETG, 0.4 nozzle. No supports needed. Print and be gentle when fitting. Once fitted, works great.
If you need to make Ikea Bror shelving system higher than default 190 cm. You need another set of Ikea Bror legs, cut to the size, to put on top. If you want to make it much higher, it's best if you use second “X”-rod mounted to the top…
Like the baseplate by creator Kyle Warren, it allows additional fields to be connected with screws and magnets to be added. The fixing notches should fit all BROR racks from IKEA. I recommend printing from PETG, or another non-brittle…
Hello there, This is my very first share. I use Ikea bror shelving system to put all of my 3d printers and some other accessories. For my Prusa MK4, I used the Logitech C920 Original Prusa Enclosure Mount from Hoppsen, which is fantastic,…
Cache pour les montants d'étagères IKEA Bror
This object lets you install casters to a Bror workbench. This is a new version of my previous design ( http://www.ctheroux.com/ikea-bror-caster- holder/ ). It is more robust. This design was inspired from the design of Arek (…
ledstrip clips to mount Ikea MITTLED in Ikea BROR metal storage cabinet post. Print using PETG filament. After printing, first click into mittled, then place assembly in a inner corner of BROR steel post. First clip in bottom. Top clip…
Stronger version of @lochej_2068433 adapter. You need to mirror in X axis for the other side.
I found it challenging to print the original pegboard plates in any orientation, so I redesigned them in two parts to slot together. I only have the one BROR so didn't need the dual plates and just focused on the corner aspect. The M5x16…
use a M4 screw to attach direkt to the self. Since in my shelf not all holes are strait i have a left and a right version that is a bit tilted.
Simple parametric riser to help level Ikea BROR shelving on uneven surfaces that prints quickly and follows the original Ikea design. Adjust the RiserHeight parameter to the height between the bottom of your BROR leg and the floor. This…
Print with a brim to lock the piece in place. Otherwise there is chance it move. You can then fix the piece with one small nail at the top. If you print it, and it works for you, please rate it and post a make, that would be highly…
I remixed the modell of straubi to fit on the bigger Bror with this special machanism to install the shelfs. For istalation you need: 4x screws M5x20 4x M5 nuts 4x bars in the right lenght (you can measure it yourself)
Tired of your robot vacuum getting stuck? This is a remix of the excellent original BROR Riser design by https://www.printables.com/model/415849-ikea-bror-adjustable-foot . The main difference? Now you can choose your perfect height! The…
Hello there, I use an Ikea Bror shelving system to put most of my 3D printers and their accessories. I use the HUE lighting system as well, so why not properly put them together? I used Ruthex M4x8.1 threaded inserts together with M4x12mm…
The dimensions of the steel frame of the plywood top are different from other BROR shelves (15mm length, 2mm thickness vs. 10mm length, 1mm thickness), and thus this clips will only fit on the plywood top. Printing I printed this out of…
These simple brackets hook perfectly onto your IKEA Bror shelf, no glue or hardware required! Easily adjust the distance between the brackets to fit any roll. Slide the corner of the slit into the connection between the shelf top and the…
The BROR shelves fit together flush when you combine two units, but if your units include the lower cabinet there will be a gap between them, and things you put on top are bound to fall into that hole. This model allows you to fill that…
The IKEA BROR is a great piece of furniture to install your 3D printer, but if you have a MK4 enclosure, the power supply box will hit the wall and the front legs will be in mid air… This bracket will give you a 1'' (25mm) extension to…
Make your IKEA BROR even more versatile with this pluggable hook. Mounting It's really easy, the hook just need to be plugged on the sheet metal (see picture). On my BROR it fits thightly. If you need more space you can adjust the Freecad…
Magnetic LedClip for the Bror Ikea table. Magnet : Ø 4mm, 2.7mm height
Printed from PETG, 0.2mm layer, 15% infill. Top tablet holding taps printed with manually painted supports. Mounted using 2x M3x20 or 25 FHCS and 1x M3x14 FHCS screws. If you want to print it on a printer with a smaller bed just cut in…
Contains all the spacers for one 74cm Ikea BROR Workbench Drawer in a single file with the now properly mirrored corner. Link to the workbench these spacers are for:…
Easy addon for the IKEA BROR shelves. 2 hooks that can handle quite some weight. Ideal for coats, empty backpacks, hats. I also made a version for the middle connection between multiple bror units that can be found on my profile
I wanted to attach a webcam via the cool articulating system to an IKEA Bror. Bror comes with regular mounting points. Normally those are for fixing shelves and joining together adjacent Bror columns, but you can also slide on 3D printed…
I designed this adapter for my Bror shelves. Note that I have 2 sets of shelves adjoined together. Printed with Overture Space Gray PLA. No supports required. Visit Kai's page for instructions to assemble.
IKEA BROR storage door stop. Fits on the metal side panel using leftover screws.
Print Settings Printer Brand: Bambulab Printer: P1S Rafts: No Supports: No Resolution: 0.20 Infill: 25% Filament: Oveture Super PLA+ Black Inspired from 2 other different model: 1. -…
Slightly longer version of a IKEA Broro shelf hook, so you have more clearance between bottom of shelf above and the hook
Printed in TPU95A with 100% infill 2 models: One closely modeled after the original and one with additional support area to reduce footprint on floor Comes with parametrized Fusion 360 file in-case you want to edit it. My designs are…
This is an upgraded version of the other filament holder for the struts of an IKEA Bror. I added support struts to hold. I also changed the connecting rods to be more stable within the holder and, since I have yet to master rolling parts,…
![[IKEA BROR/SKADIS] Back Mount for BROR shelf of SKADIS w. original IKEA screws](https://media.printables.com/media/prints/1219899/images/9151329_160d6f57-99d3-4a80-b199-44bc098530f9_2f7df28a-ce72-4ae0-9512-bfbf6f180a00/bror_skadis-mount-03.jpg)
![[IKEA BROR] Vertical Shelf Lock 2.0 (w. original IKEA screws)](https://media.printables.com/media/prints/8f7da792-2494-4a58-ace5-45675e4df2b9/images/9694904_ca2205bb-e8b9-49f2-a27f-b37480e8d908_399d13f0-75d7-4390-a65e-8fb367052252/makes-02.jpg)
![[IKEA BROR] workbench/trolley Cable Clips](https://media.printables.com/media/prints/0b4bada9-efe8-4252-af6e-d90732fc6973/images/9245576_26b665d1-61f9-49a8-a10e-96af5eb07de4_a822794a-8065-4533-82e1-b50e8e777193/3d-model-11.png)
