Wyniki wyszukiwania: canopy

Sortowanie

653 modeli

P
PrintablesmoWerk

Ceiling Rose / Lamp Canopy | Lamp Mounting Plate (Lampenbaldachin)

A versatile, low-profile ceiling canopy system with a height of only 3 cm, suitable for various mounting situations. In case you only look for a holder for your existing canopy, also check the @mikhart remix for 10cm canopys Available…

Wydruk około 3,04 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
322
Polubienia
59
Ocena
5
P
PrintablesHoerkes

Lamp Canopy/ Lampenbaldachin

Covers the electrics on the ceiling. Suitable for wires up to 6mm in diameter. The top part is designed to be screwed to the ceiling to avoid slipping down the cable, the botton part holds to the top part with a “click on” mechanism.

Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
154
Polubienia
30
Ocena
5
P
PrintablesHoerkes

Canopy/ Baldachin

Covers the electrics on the ceiling. Can be screwed to the ceiling, screw to be covered with a plug.

Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
77
Polubienia
11
Ocena
0
P
PrintablesTony

Canopy for Ford Raptor

Another accessory for Vit Budina's Ford Raptor. I used snug supports.

Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu

Pobrania
75
Polubienia
6
Ocena
5
P
PrintablesDusanH

Improved canopy for PELIKAN/KAVAN BETA 1400 V2 (RC plane)

Printed with PLA (0,2mm SPEED) with 5% Cubic infill. Canopy has place for a magnet, same as original, but can be also fastened using a velcro.

Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesBen Sutton

Backflow preventer canopy

I had to replace the bonnet/poppet assembly on our sprinkler system's backflow preventer (a Febco 765) this year and the new piece didn't come with a canopy. Rather than pay $25 for a curved piece of metal, I opted to just make my own. I…

Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
8
Ocena
0
P
Printablesorian

Riese&Muller Load60 canopy frame clamp

Sticks from the canopy get used pretty quickly and fall through the holes. This little print helps to prevent it. You need: 4x M3 14mm 4x m3 nuts On the photos the nut hole is bigger, i've made it smaller later. Prints without support.

Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
0
Polubienia
0
Ocena
0
P
Printables3DPrintDemon

Voron 2.4 / Trident Canopy Top Hat - REMIX Split model, half printing time & 5g supports

…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…

Pobrania
14 061
Polubienia
553
Ocena
4,97
P
PrintablesMakerMeik

BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…

Pobrania
2937
Polubienia
198
Ocena
5
P
PrintablesPrintSomething

Voron 2.4 / Trident Canopy

Canopy for the Voron 2.4. Will need to be printed with supports, corner for fan will need to be mirrored for one side. Will work with 250, 300, & 350. Will use the standard acrylic top panel. Spots for 60mm fans with spacing for charcoal…

Pobrania
2346
Polubienia
522
Ocena
4,73
P
PrintablesWE are FPV

BetaFPV AIR65 TPU Canopy

Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…

Pobrania
1501
Polubienia
134
Ocena
4,88
P
Printablesneotil

BetaFPV Air65 Canopy Replacement: low camera angle

UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…

Pobrania
1429
Polubienia
90
Ocena
5
P
PrintablesKrhom

DJI O4 Air Unit Whoop Canopy

Print in TPU, organic tree supports. I weighed it at 1.7g. There's room to make it lighter for sure, but I also want it durable. Feel free to give me feedback!

Pobrania
1074
Polubienia
72
Ocena
5
P
Printablesusinguser

Meteor 75 Pro O4 canopy, remixed from Flywoo FireFly 16/18

The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…

Pobrania
712
Polubienia
33
Ocena
2
P
PrintablesMartin

Thicker BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it

Pobrania
710
Polubienia
73
Ocena
5
P
PrintablesspectrexFPV

BetaFPV C03 camera mount/canopy [Improved Complete Set]

BetaFPV C03 camera mount The design combines the idea of brighfive's Bribrain LowRider version requested by the legendary TDog. Features: Available Angles: 10°-60° @ 1° interval apart Weight: Approx. 0.573g Mounting Pattern: 25.5x25.5mm…

Pobrania
604
Polubienia
32
Ocena
5
P
PrintablesLumbaLumba

Walksnail 1S Lite Kit Canopy 25.5х25.5 (mobula, meteor etc)

25.5х25.5 Canopy Walksnail 1S lite kit camera (mobula, meteor etc) Weight = 1.7g Angle = 30

Pobrania
555
Polubienia
43
Ocena
5
P
PrintablesRodrigo Sclosa

Mobula 6 Demon Canopy

I designed this new canopy for Mobula 6 to solve some problems: It has support for copper antenna on the rear. Upgrade recommended for yours. Support for a small 9mm buzzer. As it is very small, a buzzer is useful to locate it if it falls…

Pobrania
531
Polubienia
35
Ocena
5
P
PrintablesMacNeill

Ceiling Rose Canopy Abzweig-Baldachin

I am not sure if the name for this part is right... I searched quite a while for the correct translation. But at first I didn't even know the german word.... :D In german it is called "Abzweigbaldachin" so the direct translation should be…

Pobrania
497
Polubienia
67
Ocena
5
P
PrintablesJohn doe

Cetus Pro Frame and Canopy replacement

I crashed my Betafpv Cetus pro and couldn't wait on Frames to come in the mail. I took the hole spacing from NSA imperfect tiny whoop. I removed some structural components from beta75X Frame to get the Cetus Pro Flight Controller to fit…

Pobrania
492
Polubienia
23
Ocena
5

CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY

I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…

Pobrania
444
Polubienia
40
Ocena
5
P
PrintablesCarlos

hdzero lux canopy

Based on my design for the eco camera, I developed the lux version as well. Please let me know if you'd like more angles and any modifications. Link to the eco version:…

Pobrania
442
Polubienia
18
Ocena
0
P
PrintablesReuben

FPV Drone - Air75 Canopy (1.02g)

I printed mine out of PLA, but I would recommend TPU. It mounts the camera at a 35-degree angle. It mounts on top of the U.FL socket to hold it down, as I found it would always come out with the stock design.

Pobrania
415
Polubienia
28
Ocena
3
P
PrintablesBash FPV

Air65 canopy ultra lightweight

Air65 canopy ultra light.

Pobrania
414
Polubienia
40
Ocena
0
P
PrintablesWiredEarp

Air65/Air75 canopy tilt extension

This tiny bit of plastic lets you decrease the tilt you can apply to the camera on the Air65 and Air75. This lets you fly slower and still see straight ahead. Weights under 0.1g, which is probably less than most of the other solutions…

Pobrania
409
Polubienia
43
Ocena
5
P
Printablespiero menetti

BetaFPV Meteor 65 Canopy V2

Very similar to the original, maybe next iteration will be lighter. Printed in PETG. Category: R/C Vehicles

Pobrania
408
Polubienia
41
Ocena
5
P
Printablesedwardsch

Tressym Joker tinywhoop canopy (supports DJI O4 Lite, BetaFPV P1, HDZero Lux, HDZero Eco, NBD BeeEye, BetaFPV C03, Tinywhoop Pinch, Caddx Ant Lite)

In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…

Pobrania
397
Polubienia
35
Ocena
4,5
P
PrintablesExerqtor

Voron 2.4 & Trident Canopy PTFE passthrough

Canopy PTFE passthrough CHANGELOG 30.03.2024: Initial release. Description: I'm running both a Nevermore Stealthmax (which have sub-ideal PTFE routing) and "JSmith17's Canopy" on my Trident so I thought I'd make a better and more elegant…

Pobrania
389
Polubienia
72
Ocena
5
P
Printables3DPrintDemon

VORON 2.4 TRIDENT CANOPY TOP HAT NEOPIXEL LED MOD!!! CONTROLLED BY MACRO!

…Please be sure to hit like & post a make, I'd love to see your prints! Here's my new Neopixel LED Top Hat Mod ! Add lights to the very top of your printer so you can easily see what its doing from a distance or in a busy room/farm! These…

Pobrania
389
Polubienia
112
Ocena
5
P
PrintablesBacon2002

Whoop canopy

This is a strong and light Tiny Whoop style (25.5 x 25.5 mounting) canopy specifically deigned to accept: HDZero - Nano camera (also other 14mm nano style cameras) Happymodel - ELRS PP / EP2 receivers (the RX fits behind the camera on a…

Pobrania
383
Polubienia
45
Ocena
5
P
PrintablesFredrik

Voron 2.4 Canopy 300mm middle part

Just did a little bit of modifying to make the 300mm middle part from the original model printable flat on it's back just like the remixed 350mm version .

Pobrania
382
Polubienia
34
Ocena
5
P
PrintablesSusManufactory

"Susi-Clip" - Gardening Clip System For Plants and Canopy Support

Introducing the Susi-Clip: the ultimate plant care companion designed to revolutionize your gardening experience. This versatile, plant-friendly tool features an innovative S-shaped form that ensures your plants remain healthy and…

Pobrania
371
Polubienia
143
Ocena
3,5
P
PrintablesJorg1d

HDZero Whoop Lite Canopy

Printet in 98A TPU, tested OK with both 0.15 an 0.20 layer height. Without the bottom plate it comes out lighter than the one delivered with Moblite 7 HD :)

Pobrania
361
Polubienia
51
Ocena
4,67
P
Printablesdax.neal

Betafpv Meteor75 Pro DJI 04 Lite PP Canopy

Seems to have fixed my jello issue and is more supportive in a crash avoiding the weak betafpv canopy. Shaved some weight off since it is TPU. Used 2 m1.7x14mm screws. One on each side to mount. I use the spacers to provide some rigidity…

Pobrania
345
Polubienia
15
Ocena
0
P
PrintablesCarlos

Ultra light hdzero eco and pinch camera whoop canopy

Designed for the hdzero eco camera it will also work with the analog pinch cam. Weighing in at 0.68g this is one of the lightest whoop canopies you can use that actually protects the camera, (your weight can vary on the type of tpu, your…

Pobrania
342
Polubienia
10
Ocena
0
P
PrintablesKPV

FPV Toothpick Canopy

Suits a 14mm wide nano style camera (such as the HDZero Nano V2) with an adjustable camera angle between 25 and 60 degrees. Antenna mount is designed to fit the Foxeer Lollipop Mico. Fits on 25.5 x 25.5mm mounting with M2 stack screws.…

Pobrania
329
Polubienia
34
Ocena
5
P
PrintablesTokyo_Dom

Mobula6 canopy Pinch camera adapter

This is an improved version of my Mobula6 canopy Pinch Camera adapter. This one uses the camera-holding design from RAB's awesome folded canopy, but I wanted to have the protection, light weight and instant angle adjustability of the…

Pobrania
324
Polubienia
25
Ocena
0
P
PrintablesCraftyFPV

Whoop canopy - Improved Fastback

Enhanced Fastback Canopy for TinyWhoops: This version offers additional mount points and is optimized for weight reduction compared to its predecessor. I advise using the 4.1 variant; the ELRS tray in the 4.0 model isn't effective and…

Pobrania
323
Polubienia
28
Ocena
5
P
PrintablesFalkien

Voron 2.4 / Trident Canopy Top Hat - REMIX Skirt inserts

Here is what you need to reproduce this. There are two sets of prints single-corner and single middle. When you print the tophat there are (4) corners that consist of 2 prints and (4) middle pieces. I have them named for each set. Here is…

Pobrania
314
Polubienia
100
Ocena
5
P
PrintablesRoy

Meteor 75 Pro Flywoo o4 Wide Canopy and Lens Cap

Meteor 75 pro canopy and lens cap for the Flywoo O4 Wide Air Unit 155° FOV

Pobrania
313
Polubienia
25
Ocena
5
P
PrintablesTheRealJocki

Haube für Align T-Rex 450 | Canopy

Stützstrukturblocker sind zwingend erforderlich (siehe Bild). Mit der Nase nach unten drucken funktioniert wunderbar. Support blockers are absolutely essential (see picture). Printing with the nose down works wonderfully.

Pobrania
313
Polubienia
13
Ocena
0
P
PrintablesGurpartap Singh

Mobula 8 Camera canopy

Modula 8 camera canopy - with and without rumcamthumb pro mount. supported camera angles upto 30deg. Let me know if you need one for more camera rotatiion. Support can be a little tricky to remove but hang in there.

Pobrania
310
Polubienia
22
Ocena
0
P
PrintablesMschivou5

Canopy for Firefly 1S FR16 Nano Baby Quad Analog V2.0 ELRS

canopy and batteyr holder for the analog version of the V2 firefly nano. this has the holder for an elrs receiver.

Pobrania
299
Polubienia
22
Ocena
5
P
Printablesstubb0rn

Meteor85 Canopy for Walksnail 1S VTX

Canopy for the Meteor85 frame by BetaFPV to fit a Walksnail 1S VTX and its 14mm camera.

Pobrania
297
Polubienia
23
Ocena
0
P
PrintablesKrasimir

BetaFPV Pavo 20 Pro canopy for Walksnail Moonlight

That's my variant of the original canopy. I've added holder for 2 antennas and a GPS. Printed in TPU, will see how it holds. GPS used: Foxeer M10Q-120 ← this is my go to for small quads. Amazing performance.…

Pobrania
283
Polubienia
31
Ocena
0
P
Printables365lyf

Sim Racing Canopy for Triple Monitors

Developed this sim racing canopy, as I wanted something that had a high quality OEM-like finish with zero flex. Consists of a number of brackets angled at 45degrees for the centre, and 38 degrees for the side. Instructions: You will need…

Pobrania
278
Polubienia
123
Ocena
0
P
PrintablesLukasz M

DJI o4 (lite) canopy

Canopy for TinyWhoop 25x25. printed with TMS for AMS (Bambu Labs)

Pobrania
277
Polubienia
16
Ocena
0
P
PrintablesCarlos

Whoop canopy for hdzero and walksnail

I like the whoop canopy made by happymodel and also saw that rotor riot develop a tpu version for their vision whoop, but I don't like how heavy it is. So I created my own version which weighs less and protects hdzero v3 cams better. Some…

Pobrania
277
Polubienia
26
Ocena
5
P
PrintablesEddie Miller

lidl Glider canopy

A modified canopy for the Lidl Foam glider

Pobrania
269
Polubienia
18
Ocena
0
P
PrintablesExerqtor

Voron 2.4 & Trident 350mm Canopy side handles

2.4 & Trident 350mmCanopy side handles CHANGELOG: 30.03.2024: Initial release. Description: I didn't want to remove the handles on my Trident when I started to print JSmith17's Canopy but didn't like the avalible options. I've been using…

Pobrania
263
Polubienia
64
Ocena
5
P
PrintablesHyperPrints

Micron Top Canopy

I liked the V2.4 top hat mod, and decided to make one for the Micron as well. This is designed for the 180 version, I will likely also add the 120 and 160 versions soon. These are designed to print flat and will fit on the Micron+ build…

Pobrania
256
Polubienia
66
Ocena
4,88
P
PrintablesWilliam McCann

Tiny Whoop Canopy

This is my remix/take on the Canopy used by Mr Shutterbug in his Emuflight DAS video. He stated that he used a model that was remixed by marblekit from a design by DaveC. I found that the camera angle was way too high for my liking and so…

Pobrania
252
Polubienia
19
Ocena
0
P
PrintablesAntipode

Voron 2.4 / Trident Canopy / Top Hat, prints flat (with CAD files)

This remix of the excellent top hat by PrintSomething splits the corners at a 45 degree miter and flattens the backs of the middle sections. I also replaced some fillets with chamfers for better printing. I also added alignment guides on…

Pobrania
248
Polubienia
20
Ocena
5
P
PrintablesBURDFAMFPV

mobula 8 dji 04 canopy

dji 04 lite canopy for mobula 8

Pobrania
247
Polubienia
18
Ocena
0
P
PrintablesNordfpv

BetaFPV CO3 light canopy

I broke my Air65 canopy and didn't want to wait for shipping of a new one. I've seen a similar model to this one on the internet for other cameras, and I couldn't find a light weight canopy for the betafpv CO3 camera that I could use, so…

Pobrania
246
Polubienia
29
Ocena
0
P
PrintablesMupshot

PVC canopy

A challenge was laid down infront of me to build a bed fort. Using the mounting holes for an upper bunk bed and 1in PVC, this was my answer. pieces: base mount . accepts the vertical and 45deg support. The 2 piece version allows for…

Pobrania
246
Polubienia
62
Ocena
0
P
PrintablesLuis Pereira

O4 canopy for flywoo lens mod

Printed this to use on my meteor75 pro with the flywoo O4 lite lens mod. Still waiting for the lens mod to assemble everyting.

Pobrania
244
Polubienia
14
Ocena
0
P
PrintablesSpokalope

Meteor 75 Pro Canopy (Flywoo Wide Lens DJI 04)

Minimal canopy design for the Meteor 75 Pro 04. It allows camera angles of 5 to 30 degrees. Printed out of Nylon, it weighs 1.36g (after paint) and 1.27g (before paint). Cheers!

Pobrania
240
Polubienia
17
Ocena
0
P
PrintablesGeekMystique

Easy print Moblite / Mobula canopy for Caddx Ant Lite

Strongly inspired by the very effective design of ngn33r: https://www.thingiverse.com/thing:4859251 other cam sizes & angles can be updated in the provided F360 files.

Pobrania
239
Polubienia
27
Ocena
4
P
PrintablesSSX556

M2 Caddx Ant Lite Adapter for Mobula6 & 7 1S canopy

A small adapter clip to screw a Caddx Ant Lite into a Mobula6/7/8 canopy using M2x4 screws and M2x3 heat inserts. M2x3 heat inserts from cnckitchen Be careful while melting the inserts in as the plastic walls are very thin. I added a…

Pobrania
239
Polubienia
25
Ocena
5
P
Printablesfpvgio

Mobula8 DJI 04 Lite Canopy

tpu 50%infill - weight with 04lite = 21g. 0.2mm layer height organic supports should fit original 04 lite camera faceplate & and axis flying 14mm camera housing. install your camera first and run a small zip tie through the spaces at the…

Pobrania
224
Polubienia
18
Ocena
5
P
PrintablesCarlos

DJI 04 air lite canopy V2

A completely redesign of the previous canopy with a few improvements. Easier to install the camera into the canopy. Opens up like snakes jaw. Rigid structure, which helps in crashes and reduced jello on high throttle maneuvers. ND Filter…

Pobrania
215
Polubienia
24
Ocena
0
P
Printablesseansean

OMPHOBBY M2 EVO CANOPY

OMPHOBBY M2 EVO CANOPY OMP HOBBY M2 EVO CANOPY

Pobrania
215
Polubienia
8
Ocena
4
P
PrintablesKR4MT

S500 Canopy

I beefed up and shortened the sides on the original and made a couple of mounting brackets. Front cowel mount uses an M3 threaded insert in the center and the rear tab is secured to the rear inside of the canopy using the short extended…

Pobrania
213
Polubienia
5
Ocena
0
P
PrintablesKidCe

"SmollPP" Canopy

Update 04.01.2025 Updated Normal version to V22: Improved Antenna Holder hole sizes to better fit the HDzero AIO5 Linear antenna Removed holes that were scattered over the whole design at the cost of +0.02g weight to improve durability…

Pobrania
212
Polubienia
29
Ocena
0
P
PrintablesTyp_im_dunkelln

75mm Tiny whoop (mobula7/meteor75) canopy for big-lens 14x14 camera like a foxeer Toothless 2 nano (starlight)

1mm wall thickness Can be printed in PLA or PETG with some overhang artifacts, that noone will ever see 😇 TPU might work as well, but won't be as protective for the lens. Suitable for Foxeer Toothless2 nano (Starlight) camera (14 mm wide,…

Pobrania
212
Polubienia
20
Ocena
0
P
PrintablesNoah Gunderson

Flywoo Wide Angle Lens Whoop Canopy V2 - 5°-25° Adjustability

This is my take on a tiny whoop canopy designed to accommodate the Flywoo O4 Wide camera. This is currently being used by FPV Manitoba ( https://www.instagram.com/fpvmanitoba/ ) for tiny whoop commercial shoots. It’s a derivative of my…

Pobrania
212
Polubienia
13
Ocena
5
P
PrintablesCarlos

HDzero Lux camera long leg canopy

Raises the canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. the canopy comes in at…

Pobrania
210
Polubienia
6
Ocena
0
P
PrintablesDUSTO221

Voron Trident/2.4 Canopy tophat Box turtle mounts

I was asked by a few members in the BoxTurtle community to design some mounts for their Voron 2.4's which use this tophat design: Printables link for tophat:…

Pobrania
210
Polubienia
54
Ocena
5
P
PrintablesChris Thijssen

TIny Whoop canopy's

Tiny whoop canopy. For the runcam nano3 , flywoo nano and foxeer pico , the betafpv c03 and the ant lite. v2 is lightweigt race , v3 is freestyle low angle. They are adjustable withe the extra mounting hole.

Pobrania
210
Polubienia
35
Ocena
0
P
PrintablesLukasz M

O4 canopy for Mobula 8

This is a O4 canopy for Mobula 8. Recommended printing with TPU 68D filament (I printed with TPU for AMS). I recommend setting 100% infill and using tree supports. When printed with PLA and subjected to a crash, it breaks (tested). Allows…

Pobrania
207
Polubienia
3
Ocena
0
P
PrintablesAlex G

Volantex Phoenix & Ranger 2400 FPV canopy - DJI O3

FPV canopy for Volantex Ranger 2400 and Volantex Phoenix 2400. With 9g servo mount and designed to house DJI O3 air unit. It will also work with any other VTX since you can use zipties to mount VTX in place. This is a rough first version,…

Pobrania
203
Polubienia
15
Ocena
0
P
Printableskevinstonehouse

Aero Canopy (RCExplorer Bicopter)

A few years back I purchased one of David Windestål's newly released Bicopters from RCExplorer (https://rcexplorer.se/). This was a very interesting RC build and a challenge to fly. However the carbon-fiber canopy made it very difficult…

Pobrania
202
Polubienia
96
Ocena
0
P
Printablesrodsgear

Caddx Ant and Ant Lite Canopy for moblite style tiny whoop

Based on the model posted by MrShutterBug on Thingiverse.

Pobrania
199
Polubienia
27
Ocena
5
P
PrintablesMadman1027

DJI O4 friendly canopy

Many toothpick canopies for a 14mm camera are not suited to the up front bulk of the o4 (lite) camera so I designed this canopy to work with my o4 mount ( https://www.printables.com/model/1147195-dji-o4-lite-14mm-camera-mount ) providing…

Pobrania
194
Polubienia
31
Ocena
0
P
Printablesgue-ni

BetaFPV Air65 Canopy for Lower Camera Angle

This is a canopy for the BetaFPV Air65 (C03 camera) tiny whoop FPV drone with a camera angle of just 15 degrees, perfect for indoor flight. It allows slower and more controlled flight. The canopy is also reasonably light weight and…

Pobrania
192
Polubienia
23
Ocena
5
P
Printableslameandboard

Mobula 8 - o4 lite canopy - remix of burdfamfpv's

tested and works great! I just added a higher angle version….

Pobrania
190
Polubienia
6
Ocena
0
P
PrintablesChris Thijssen

Hdzero Tiny whoop canopy for Lux and Eco (45 and 40 degrees)

Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.

Pobrania
189
Polubienia
11
Ocena
0
P
Printablesyinyang08

O4 Mobula Canopy Adapter

Remix of Krhom's first O4 mount. No supports needed, printed in TPU 95A, works with the OEM self-tapping screws, maintains some camera tilt options. You do need to trim the canopy arms around the USB-C and the Digital port so they're not…

Pobrania
187
Polubienia
15
Ocena
5
P
PrintablesRACBOTS

Tiny Whoop Canopy Mobula 6

Canopy para tiny whoop Mobula 6 en filamento flexible TPU en diferentes diseños con orejas, tiburón y simple. Especificaciones: Para imprimir de manera adecuada el filamento flexible TPU, se recomienda usar una impresora 3D de extrusor…

Pobrania
185
Polubienia
22
Ocena
0
P
PrintablesAl Mon

Pilot and New Canopy - Viper

Canopy with sprue attached. The show Vipers - some had some did not have this feature. Up to you. Also a pilot. Very rough. You will need to tweak it. I cannot guarantee the pilot will fit perfectly.

Pobrania
184
Polubienia
14
Ocena
0
P
PrintablesTim O'Brien

DJI O4 Lite Tiny Whoop Canopy Project

Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Add the best 9g video system to your Tiny Whoop! I've fully modeled the field-of-view (FOV)…

Pobrania
183
Polubienia
29
Ocena
5
P
PrintablesBing

Voron 2.4 / Trident Canopy Top Hat - REMIX For 1-0-R Handle

A remix that allows for 1-0-R handles to be left on for a top hat.

Pobrania
183
Polubienia
40
Ocena
0
P
Printablesseansean

goosky s1 canopy

wall line count 3 or more recommended no need grommet

Pobrania
181
Polubienia
8
Ocena
0
P
PrintablesAgent942 (GW)

Ozark Trail Pop up Canopy Tent Top Center Hub V2

So, the Ozark Trail pop-up canopy tents are pretty popular in Canada, and I've had mine for little more than one year. This year, I didn't peg it down and the wind flipped it over (upside-down) and this stressed the center hub, breaking…

Pobrania
181
Polubienia
16
Ocena
0
P
Printablestjdesign

Canopy Board Game Insert

This is a little insert I made for the game Canopy by Weird City Games. There is a version for sleeved cards and unsleeved. The unsleeved version has a card tray for easy draw/discard, and separate playable trays for the other components…

Pobrania
176
Polubienia
37
Ocena
4,83
P
PrintablesHypnocif

Meteor 75 canopy O4 Wide DJI officiel.

Une canopy pour le Meteor 75 Pro et le nouveau DJI O4 Wide. Chez moi ça vol très bien et sans "jello".

Pobrania
171
Polubienia
14
Ocena
5
P
PrintablesLuis Pereira

Canopy for flywoo O4 lite ultra wide lens

This is amount for the flywoo ultra wide lens mod for the O4 lite with O4 Pro mounting. I dont hev pics of this mount in particular, but there is some pics of the O3 version of this mount on my meteor75 pro here:…

Pobrania
167
Polubienia
15
Ocena
0
P
PrintablesRocco DiVerdi

2 Material Moonlight Canopy for Pavo 20 Pro

The main body of this canopy secures the antennas and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine. Use 4x m2 heat set inserts (2 mm tall) for the mounting holes. The TPU bumper is…

Pobrania
163
Polubienia
18
Ocena
5
P
PrintablesKeith Luneau

Esky Eagle Walksnail - Canopy insert and pan/tilt

You'll need to trim some foam from the canopy and glue the insert in place. I placed mine so the front of the insert is about 10mm behind where the air intake stops. Trim the hole a bit small at first then fine tune for a snug fit, it's…

Pobrania
163
Polubienia
19
Ocena
0
P
PrintablesPeter Petermann

Tiny Champion FPV Racing Drone Canopy

Warning this canopy is meant for the looks, it is not designed to make your drone go faster (infact it adds a bit of drag and weight), and as its very tight inside, it is more likely to damage your stack in hard crash, than it is to…

Pobrania
159
Polubienia
28
Ocena
0
P
PrintablesG4ZO

mobula 7 canopy

1mm wall thickness It is recommended to print in resin but should also work fine in FDM. Suitable for Happymodel Ant camera (14 mm wide). Mount hole size: 25.5mm*25.5mm

Pobrania
158
Polubienia
9
Ocena
0
P
PrintablesCybuster

Flywoo O4 lite wide direct mount canopy

This is the direct mount canopy for Flywoo O4 wide lens - without 18mm or 20mm adapter. Which will save almost 4g. Canopy canopy itself is 2.81g. It is mounted using M2 screws to the frame (Crux 3) 0 - 20deg adjustable

Pobrania
158
Polubienia
10
Ocena
0
P
PrintablesF. Mandel

DJI F450 Canopy - FC Protection

Canopy - FC Protection. Can be zip tied to the fram. The screw heads keep it in place

Pobrania
157
Polubienia
12
Ocena
0
P
PrintablesRice_Bowl

Hachidorii C03 Canopy

Though you can use most canopies for the Hachidorii XS and V2 - with some slight modification to the holes to press fit onto M2 nylon screws , I've decided that it would be great to have a set of canopies for a few cameras. These aren't…

Pobrania
156
Polubienia
12
Ocena
5
P
Printablesdp makes

Swing Seat Roof Canopy Bracket

Swing Seat Roof Canopy Bracket. Printing Instructions: Resolution: 0.15 Infill 30-100% Supports: No Rafts: No

Pobrania
156
Polubienia
18
Ocena
5
P
PrintablesCunfusu

Air65 C03 camera adapter for Mobula6 / Mobula7 canopy

Frustrated with the fragile and difficult-to-source stock canopy for the BetaFPV Air65? The original canopy, while lightweight, breaks easily and offers limited, cumbersome camera adjustment. This design allows you to upgrade to a more…

Pobrania
155
Polubienia
5
Ocena
0
P
PrintablesRocco DiVerdi

2 Material Walksnail Canopy for Pavo 20 Pro

The main body of this canopy secures the antenna and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine. Use 4 m2 heat set inserts (up to 4mm tall) for the mounting holes. The TPU bumper is…

Pobrania
153
Polubienia
13
Ocena
5
P
Printableslimago

Smaller lamp canopy IKEA Hemma

The quite large lamp canopy of IKEA Hemma didn't fit our beamed ceiling, so I designed a smaller diameter (110mm) and overall size. The original cord routing screws in very well. Drawing is not fully defined, excuse for not being fully…

Pobrania
150
Polubienia
25
Ocena
5
P
PrintablesTim O'Brien

ZOHD Drift Canopy: Lightweight Vasemode

My friend lost his ZOHD Drift's front canopy– so I designed him one to be 3D printed, obvi The original one, even when printed with 1 perimeter and minimal infill, was still far too heavy and so strong it was vast overkill. So I…

Pobrania
148
Polubienia
5
Ocena
0