8261 modeli
Very happy with this creation, it's a 35:1 print-in-place dual stage planetary gear system (sun 1 : ring 2). The really cool thing is that the rings won't shift without the inner gears being turned, so no back-driving ; the arms are…
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…
Clamping Knobs for metric screws and nuts. Sizes: M4, M5, M6 and M8 Just press the screws or nuts in - rescale in your slicer if they need a different fitting. The provided gcode includes all sizes. Happy printing! Print instructions…
Quick clamp replacement or saving money the choice is yours. if any clamps/clips Designs to be made let me know I'm all ears. Best to print in PETG for Strength an Flexibility Screw holes are 4mm (cable clips are 3mm) 2mm thick for no…
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
Intro I couldn't find a suitable hand vise/clamp for painting D&D/DnD miniatures and other resin prints so I designed this one from scratch. It works very well, especially for terrain and odd-sized prints, plus it's a great PCB clamp for…
This 90° Corner Clamp will give you a helping hand when holding 90° corners and "T" joints together securely during assembly. A second is included for “T” joints or to allow access for gluing. Great for things like constructing model…
Festool Clamp holder - simplify your tool management Where do you currently store your clamps? Print your own Festool clamp holder and make your everyday work easier and more productive. Don't have a clamp yet? Click here We offer you…
I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…
Screw thread M14. Internal thread has a tolerance of -0.1 mm. The thread must first be screwed through several times to ensure that the screw moves well. I recommend printing a support in the internal thread. Print with 3 perimeters to…
Precision ingenieur'ed paracord lock that does not require additional parts and prints easy and reliably. Will fit 4mm diameter paracords and is very compact in size. Obviously not suitable for safety relevant applications. Assembly…
Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…
This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored. Mechanism is fully print-in-place. Add rubber band for the spring loading. I reused some that came with a bunch of asparagus. There is a…
Will fit 4mm (~1/8") diameter paracords. Eyelet diameter is 7mm (little over ¼"). Obviously not suitable for safety relevant applications. Changelog 2025-02-23 v4 added files for 0.4mm nozzle 2022-03-15 v3 complete redesign with smaller…
Files now Updated to Version 4 with two more flexible springs. This clamp if fully printable, using printed pegs instead of metallic screws. I also made other changes to make assembly easier. Build Parameters Filament - PLA Layer…
***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…
This is a two part print. A wall holder for guiderailclamps from brands like festool, Bessey and Makita. Clamps like the FSZ 120, FSZ 300 and FS-HZ 160. Other clamps will also work. You can just print the top part if you want but the…
Hier eine Tischklammer bzw. Halter für Tischdecken, die hoffentlich länger halten als die gekauften, welche nach dem 2. Mal anbringen schon zerbrechen. Gedruckt mit PLA+; das ist einerseits relativ elastisch und andererseits ziemlich zäh.
Welcome to the improved revision of my snap-in pipe clamp design, now with more diameters and additional wall distances! This versatile design is optimized for the FFF process with various filaments, ensuring a quick print without…
Newer Version aviable: https://www.printables.com/de/model/444290-bike-stand-handle-bar-clamp-v2 Self adjusting bike handle clamp stand for handle bars, to do things on the fly on your flipped bike. Designed for 32mm handle bars, but…
To be able to clamp round parts i designed a 3 point clamp that can be printed. Its not that easy to print since good tolerances and strong parts are needed. Better tolerances lead to less play and therefore better clamping. I used 4…
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Festool Quick Clamps Sys Holder
I needed some clamps for an unusual PVC pipe I had laying around. So I made this design inspired by our local generic hardware store clamps. It's parametric and can be customized in Fusion 360. The minimum pipe diameter is 16mm. There are…
A clamp based on a planetary gear set that is useful as a mini-vise. I increased the overall size and modified the design of the jaws to eliminate the need for supports and increase clamping area.
I was looking for a low profile CNC clamps, which clamps material from the side of the material, not from the top. I wanted to have access to all the top surface while milling, not covered by any clamps. My clamps has 15deg angle, so they…
Stworzyłem przyssawki do trzymania szyny festool. Ze zwykłych przyssawek pobrałem gumową przyssawkę oraz metalowe elementy. Zaprojektowałem nowe elementy dopasowane do mocowania szyny festool. Całość złożyłem tak jak w oryginale…
I have a set of Festool clamps I use mainly with FS2 Rail. I wanted to add protections to use them as standard clamps and protect wood surface I designed and 3D printed both pads in Prusament PETG Jet Black with my MINI+. No support…
DeWALT has a awesome heavy duty miter saw stand (link below) that is fairly easy to use as there are two clamps on the bottom of the miter saw that clip on too the stand. When somebody dropped the miter saw one of the black clamps on the…
I started experimenting with copper and nickel electroplating and the need for a versatile and adjustable test tube holder stand emerged quickly. Features I had a heavy plastic plate for the base of the stand. I decided to use M8 rods for…
Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.
CNC Finger Clamps for M8 or 5/16 bolts. Stepped rear with matching stepped lifter block to support clamp at different heights. Print files provided for PETG and ABS, to print 4 x clamps with or without lifter blocks Use with my 5/16…
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
After trying other similar designs, I found it hard to get the thread print clean. This design is done for a extension pole set where the two sections are 31.5 MM and 28.7 MM respectively. It should be scalable to other diameters. The…
A simple tablecloth clamp in two sizes, with a 15mm gap and with a 21,6mm gap. I am attaching the STEP files and a link to OnShape as well. OnShape Link Note: Please don't forget to leave a rating or a comment. Feedback is important for…
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
Pegboard clamp storage, remixed for Wall Control pegboards using the hook mechanism from the DDD hooks. No zip ties or rear access required - it slots in to the pegboard from the front. Very small supports needed for the hook bridge -…
You can use these clamps when repairing for instance an iPad screen and you need to clamp the edges while the glue sets. I recommend using automatic support painting on the C part of the clamp and using organic supports. When printing in…
Take standard clamping bands (1 inch wide), add 4 of the 3D printed corners, and you're ready to glue wooden boxes or other things that have 90 degree corners. The main advantage of this design over the purchased version is that the…
I created this Losmandy style camp, so I can attach whatever I like on my OTA. I found some others on the internet, that did not clamp enough or used imperial sizes. This is a remix clamping better for me and using regular nuts and bolts.…
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…
This small part is for Bessey and simliar woodworking clamps. The guide rails are used to protect the clamps of wood glue. I use them with Stier clamps, should work with Bessey as well. I shortened the original (black in the photo) guide…
These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes. They fit standard drill chucks, remember to use low speeds when polishing. The derby wheels I used have the following…
The cable mounting consist of two parts. You can fix the bottom part with two screws e.g. direct on a wall, put a cable in the holder an slide the top cover in the holder. The holder consists a small compression spring that will fix the…
I frequently lose the movable part that enhances the grip on the tip of the Spring Clamp I use at home. This campaign motivated me to try printing replacement parts. ・I tried searching on Google Photos for the model number of this Spring…
Drucktipp: mit 100% Infill drucken PLA funktioniert sehr gut für dickeres Filament kann die Klammer größer skaliert werden
Clamps for tecadi mast . www.tecadi.de/products--en-.html mast diameter 36.5 mm. SCREW M6X60 mm PETG 15% 0.20 PERIMETER X3 5H31 FOR 2 Don't forget to indicate that you like the model on printable.com. Please send your opinions for future…
3D printed table clamp for cable management Cable Management : They guide the cables, preventing them from tangling and cluttering the workspace. This helps in maintaining an organized and clean workspace. Device Stability : They prevent…
See it in action in the below video! Print Instructions: Supports required under for the ‘post’ portion of the clamp as well as the Qube500 mount points & post-hole. I recommend organic supports for this. I've place some special voids…
I bought some shifters which use the I-Spec B mounting interface, but I don't have the accompanying brakes. Part of this was an experiment to see if 3DP plastic could repeatably stretch over the bar & still adequately clamp. This would…
Clamp/mount for fastening a NM electrical cable (Romex cable) to stud. Countersunk for an ANSI #8 82deg screw. Fits a 10/2 or 12/2 (10 gauge; 2 wire (excluding ground); 12 gauge 2 wire). Slot width: ½"W x .25"deep
Have you ever had to draw a circle in pen but your compass had only a pencil tip? With this simple and small print you can screw to the compass colour pencils, pens, markers… Print it is shaped in a easy-to-print shape doesn't need…
I remixed the original to use an M3 25mm screw to hold down the item being soldered. Printing Best printed in Petg for strength. Originally, I printed this in PLA but it broke. Remixed https://www.thingiverse.com/thing:2900194 Bill of…
This is a set for bleed shimano hydraulic brakes. Use an o-ring on the cup. The clamp is for holding the hose securely to the caliper All you need is: syringe hose (I use a hose from a 2-stroke carburetor) Bleed Block (…
Mit diesen Klammern können die Kärcher Reinigungsrollen des Hartbodenreinigers schneller gedrocknet werden With these clamps, the Kärcher cleaning rollers of the hard floor cleaner can be dried faster
The wall clamp provides fixation for 35mm pipes or corrugated hoses. Designed with a 34.7mm clamping function and 11mm height. Hole for countersunk M5 Screw. Printed on my Prusa with: 0.3mm layer height, 50% infill 0.4mm nozzle.…
I subtracted the chamfer of Mike Ant's module from FluffyBunny's model. Now it works for an extruder with a sock and nests neatly inside IBNobody's MK4 Nextruder Nozzle Change Heater Block Clamp. I'm sorry it looks that way.
Inspired by the adjustable foot I found on Thingiverse ( https://www.thingiverse.com/thing:3154181 ) I realised my own design that does not need any screws to attach it to the IKEA Lack table foot. The foot just has to be cut down by at…
I would recommend printing with PETG at 0.15 layer height or less to achieve smoother surface. Part snaps in place.
Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…
This is a clamp that I designed to attach ¾ inch Loc-Line to my desk. Loc-Line makes for the perfect gooseneck mount/charger. It maintains a constant inner diameter to allow for the clean routing of wires and cables through the center. I…
This is a desk stand for the “TouchBar” generation of MacBook Pros to run them in clamshell mode (i.e. with closed display). This should fit any 13" and 15" MacBook Pro with TouchBar (including the M1/M2 13" models). It will definitely…
This is a modification of Stamos's remix of the Tripod Mobile Phone Clamp. A base plate for GorillaPods was added.
Mit diesen Klemmen können 2 oder 3 Gardena Micro-Drip Verteilerrohre 4,6 mm (3/16") gebündelt werden. Das System sieht dadurch etwas besser aus. Translation: DeepL These clamps can be used to bundle 2 or 3 Gardena Micro-Drip distributor…
A clamp for the Plant 2sides so it sticks into the wire no movement (pressed) Expand 5% for better fitting
My cats tend to try to pull the bowl of the Petlibro waterfountain, which result in a wet floor. This design clamps it against a wall or furniture. After 3D scanning the bowl itself i made it a negative resulting in 2 clamps to hold the…
Table cloth clamp for tables with thickness of 18-22mm. I used 0,4mm nozzle, 0,2mm PLA with 6% infill, 4 walls. Worked pretty well for me in the balcony. I hope it does same for you too.
Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…
Für unsere Sonnensegel brauchten wir einfach zu handhabende Seilklemmen für Kunststoffseile. Da sich die Seile der verschiedenen Hersteller unterschiedlich verhalten, kann es notwendig sein, eine kleinere oder größere Klemme zu verwenden.…
🧩 Bag Clip – Universal Clamp Fastener This clip is a simple and effective way to securely close open food packages. Perfect for chips, coffee, flour, rice, pet food, and other products stored in plastic bags. Designed as a universal…
Small Toolmakers Clamp Find the large one here! I designed this little toolmakers clamp for light clamping work such as glue up s. Obviously its not designed for actual machining work but its quite strong for a printed clamp ! Hardware…
Parametric hobby horse holder based on a design from @Wejrice but since the one of the screw holes was off, I completely redid the model in OpenSCAD. I added a table clamp by 247generator which I extended by a bottom part, cleaned up and…
Starting from the excellent design published here → https://www.prusaprinters.org/prints/63996-serre-joint-dormant , I designed my own with Fusion 360 adapted to wood size 30mm x 20mm and 8mm threaded shaft After 1st print and test I made…
Large Toolmakers Clamp Find the small one here! I designed this large toolmakers clamp for light clamping work such as glue up s. Obviously its not designed for actual machining work but its quite strong for a printed clamp ! Hardware you…
This is a part allowing to connect two one-hand type Wolfcraft clamp together to extend their reachibility. It is composed of : One connector Two thumb screws “cap” You will need in addition : 2 M6x30 (or longer) hexagonal head screws 2…
This is a simple tool clamp that allows the rotary tool to be mounted in a vise for hands-free operation. There is also an 25mm square accessory block which can be used on the opposite end of a wood vise to prevent racking if desired (see…
I remixed this file https://www.thingiverse.com/thing:5586101 so it could fit 2 remotes of various thickness. I printed it upside down on the bed without support and got a beautiful, flawless finish.
Because the silicone hose I bought for the air assist was a little too loose on the compressor, I developed a small hose clamp. Print the clamp with supports in the orientation shown. Then melt in the threaded insert with the soldering…
Wie zu sehen ist, setzte ich die Klemm Stopper für meinen Sonnenschutz auf der Terrasse ein. Da die Klammern die den Sonnenschutz halten sollen, bei Wind nicht mehr richtig halten, musste etwas neues her. Die Stopper können ohne jegliche…
I remixed it to fit the monitor shelf of my IKEA UTVISNING desk. The monitor shelf is about 22.3mm thick and the remixed model has a gap of 22.2mm. I removed the screws from the model because it fits the shelf very well. This remixed…
Replacement handle for Falke ratchet bar clamp .
Pla; Draft mode with 10% infill only and no supports as most of my designs if you print the main file. Aprroximately a 3 hours print. Upgrade your quick clamp with infinite possibilities with that universal phone, tablet and camera stand:…
Small 90 degree clamping block for spring clamps, used to align ribs while building balsa RC plane wings or other smaller items. Clamp is 1.25" square and 0.5" high. The small round pad it perfect for a fingertip to hold the clamp in…
Requires Library https://www.printables.com/model/542305-updated-openscad-library-for-hsw-attachments
[EN] These parts you can use to attach a window roller without screwing into window or wall. They are sold for 6€ a pair on ebay, so you can save a lot of money it you got a lot of rollers. The fit is rather tight, just perform a test…
The T-Loc Systainer can also be used as a mobile workbench. Based on the following designs*), two special brackets for the Shaper Origin workstation were designed to fix them on the MDF board. The original rubber feet of the workstation…
A clamp to secure the baby monitor to the bed. I use it for the Chicco baby monitor but it should also work for other brands that have the same fixing system. You need: 2 M3 nuts 2 M3x20 screws I leave the .STEP file in case you need to…
Dieser Spannwinkel dient zum festspannen von 2 Bauteilen in einem Winkel von 90°.
I needed to test some button cell batteries but my cheap multimeter had no built in load resistor. This super simple tool help clamp a resistor and dupont jumper wires to the probes. I used male-male dupont wires, removed the plastic…
As with many of us i have hobbies that require me to be able to hold a work piece at many different angles to be able to create the effect that i want. There are not many tools for holding work that will allow more than one direction of…
I recently got a 17" portable monitor and needed a space to put it when not in use. Ideally, I would keep it on my desk since that is where I use it the most. I decided to remix Mistertech's Desk Mount Headphone Holder / Mount / Clamp to…
Since the IKEA Malm is so wide, you can't attach a clamp lamp directly to it. This adapter enables you to fix a clamp lamp on the IKEA Malm and it also has a holder for the light switch. The wall thickness has to be big so that the holder…
extended the length of the original design by ~35mm, and added some more rounding and smoothening
Description: This is a 3D-printed pipe clamp bracket designed to hold pipes or rods with diameters of 19 mm and 21 mm . The sturdy design is perfect for organizing cables, mounting pipes, or other DIY projects. It includes a flat base…
To prevent forgetting the clamp on the heating block, I added an extension to the side of the clamp. Now the print fan door can't close. Damit die Klammer nicht mehr so leicht am Heizblock vergessen werden kann, hat dieser Remix eine…
Insert for reducing the width of the clamp for Multifunction Arm mounting system → https://www.printables.com/cs/model/165239-multifunction-arm-mounting-system. Thanks to the author for this amazing bracket system. You can customize yours…
Screw clamp for clamping screws in a vise. With this clamp you can tighten screws in your vise without damaging the thread. Suitable for shortening or reworking screws with a file or saw. It is for imperial, UNF-srews 1/2"-20; 3/8"-24;…
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
