1317 modeli
With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…
Everybody that can sew should be making masks now.... (written 4/4/2020) If you intend to make many masks, a rigid template for tracing and / or cutting can make things easier and faster. This pattern is for the Olson Mask that we are…
Sjablones for cutting clay for making jewelry
Made this for my wife's new favorite kitchen toy and since the space in our drawers is somewhat limited and all the existing designs I found are all too big, I came up with this design to organize the cutting discs a bit more space…
ŠABLONA PRO ŘEZÁNÍ IZOLACE https://www.youtube.com/watch?v=nSeCnuHCYws
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
This is a quick model I put together when I couldn't cut consistent 10 mm length silicone tubes for the silicone bed mod. Works with the recommended 7 mm OD automotive silicone tubing and the cutting slot is 0.5 mm which works well with…
Printable stave drum angle cutting jig. Parametric model for different drum sizes, miter channels, tool distances etc. This angle cutting jig was especially designed for stave drums in conjunction with a router table, but it can of course…
I printed this standing upright for strength, not that it is really needed most likely. Attached to cabinet with double-sided tape.
simple jig for accurately cutting your Estes cardboard tube to length. Length can be adjusted using slicer cut tool if shorter length desired
Prkénko ultra light na dálkové přechody, velmi kompaktních rozměrů, opatřené otvorem pro zavěšení, materiál PETG, rozměry 150*80*3 mm, váha 30,52 g. Ultra light cutting board for long-distance transitions, very compact dimensions,…
This device enables one to hold the elastic for the headband with one hand; freeing the other hand to make holes in it and cut it to the required length. The roll of elasticated material passes through the device and is held by two…
A imprimer verticalement. Le poussoir et constitué d'un morceau de filament chauffé aux 2 extrémités. Attention celui de l'intérieur doit être assez petit pour rentrer dans le trou prévu à cet effet.…
This is a simple cutting disc holder that you can mount in the DeWalt DCF409 TSTAK insert, and probably for other angle grinders too. You can perfectly carry it with the side handle, if you don't throw around with your TSTAK boxes, the…
Using a standard and well known cutting plier, this part holds it sticked to the Prusa frame, ready for use. Uncut end of the filament was by far my major cause of clogging problems, and the cutting plier was always away from the printer.…
Introduction and Use Case I ordered 1 inch cellular shades that were a bit too wide so needed to cut them. I removed the shades from their casing and placed them in this guide so I could make an accurate perpendicular cut. Printing I used…
Two versions for long or short screws, the hole for the rod is 6mm. 5 top and bottom, 3 walls, 30% gyroid, no supports.
Update 16/3/2025: Each model is now labeled with its size! Insulation Cutting Tool – Perfect for Plumbing Projects This versatile insulation cutting tool is available in 11 sizes, ideal for different plumbing needs. The sizes range from…
Here is a cutting board holder. No Support required.
Use brim. A minimalist cutting board stand that keeps your kitchen organized while adding a clean, modern look to your countertop. The recessed slots securely hold both rectangular and round cutting boards. Thanks to the rounded bottom of…
This is Version 2 of my Cuttings Propagation Helper . This version now provides a fit-for-all mechanism to hold onto the cuttings! How to Use Clamp your cuttings into the ribs, place the flower over a jar filled with water and let nature…
Rozměry jsou přibližné podle fotografie originálního nástavce. Zajištění pomocí šroubu M6. Matice lze vsounout volně, hlavu šroubu je lepší nahřát vtisknout za tepla. Vítám případné připomínky, udělám změny :) Tisk bez podpěr.
Cut a new PTFE tube for your Kobra 2 Serie Printer with confidence. Already premeasured just insert and cut. Note: This is the correct length from factory. If after you cut PTFE tube and you insert, and it appears to long. You will need…
Open in Fusion 360 and you will find parameters under the modification menu. See screenshot. You can change the diameter, the thickness of the disc, the number of blades, etc. I used CNC-Kitchen short m4 thread insert. Don't forget to…
Remix of bread cutting guide at https://www.thingiverse.com/thing:2794539 with 2mm notches/grooves added to prevent knife teeth from scraping plastic bits that would contaminate the bread. This is a bread slicer that can be disassembled…
This model holds three cutting boards, that range in small to large. This model takes around 2 hours and 30 minutes depending on you printer of choice. NO SUPPORTS NEEDED!
May 4th 2022 - Added v2 with a larger area to slide tube out and a hole on the end PTFE tube cutting and chamfer jig for Prusa MK3S+ with E3D Revo Six hotend. MK3S+ - 31mm and 60 degree chamfer MK3S+ - 33mm and 60 degree chamfer E3D did…
As Valentine’s Day is just around the corner, Deltaprints is once again bringing you something perfectly suited for the occasion. A beautiful, playful heart-shaped photo frame that stands on additional hearts and instantly catches the eye…
Tool to cut and bend wires for use in a breadboard. To use the the tool: Count how many holes are between the two nodes you wish to connect (including the nodes themselves) Find the equivalent number on the tool. Cut the wire to that…
This is a very simple and easy-to-print rack to hold three chopping boards for household cutting boards and devices to a maximum of about 12mm (half inch) thick, for either drying or storage OR you can customise to suit your own devices…
I used these files to have 3mm plexi cut for the enclosure on my Flashforge Adventurer 5m using the specs provided on the Flashforge DIY Enclosure Wiki page. These are not intended to be printable, but should be used for cutting your own…
An all in one needle cutting guide and bending tool for redfoxdude 's popular Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool . It's uses the needle length (35/25mm) as the reference, so it's compatible with both the…
I created this utility primarily for cutting ceiling molding at 45° angle. ⛏ Print instructions ⬢ Material: Prusament PLA Galaxy Silver ⬢ Layer: 0.2 mm ⬢ Infill: 40% Grid - bottom (base), 15% Grid - top
Folks have created stands and cutting guides for my sanding sticks https://www.printables.com/model/22236/ but I wanted a version that integrates the cutting guide into the stand. So here it is. I also include a version for standard US…
Update: V4 version should be a bit stronger. Cutting guard that fits on a Dremel 3000 and possibly other models. It screws onto the base of the Dremel and fits securely. It was made with the Dremel SC544 38mm woodcutting disc in mind.…
Protect your finger while cutting things fast in kitchen! Print instructions 0.2 mm layer height, support from table.
DD-SM Mount I created this mount to have the motor and extruder as close as possible to the X gantry bracket to not have the weight of the motor hanging a long way away from the metal bracket. This mount is very rigid, there is no droop…
🧾 Description A simple and highly effective scraper designed for cleaning cutting boards, butcher blocks, and kitchen surfaces. This tool easily removes food residue, grease, and dirt without damaging the surface. Its ergonomic shape fits…
Peigne de précision pour dégradés. Design ergonomique, impression sans support. Idéal pour barbiers. Robuste et pratique
This pin fits a standard laser cutter honeycomb table and is tight enough to keep lightly warped thin wood down and accurately cut. Other pins are bulky and too high for high resolution cutting. This pin is version 2. the original one…
Totally customized organizer with slots for disc sizes 38, 33, 26, 23, 21, 17mm. For use with Milwaukee 48-22-8436 PACKOUT Low-Profile Compact Organizer. The discs are set at a height such that they will not fall out of the holder during…
Cut your PTFE tube nice and square using a utility knife or razor blade. Gives a much better cut than using flush cutters. The opening for the blade is 1mm wide. Update: you can now open this in Thingiverse Customizer if you want to…
Saw guide for accurate angle cutting (FreeCAD file attached). I printed with 0.6 mm nozzle, 4 walls and 50% Adaptive Cubic infill which resulted in relatively stiff walls when printing with PLA. Also I added a brim to reduce warping. This…
This is a router template to make handle cut outs on cutting boards. This template can be affixed to the work piece using double sided tape or clamps. In order to use this template you need router template bits (link below). This template…
I designed one support rail with an edge/guide at the left side (for proper alignment of the cutting mat) and a generic rail without edges to be used in the middle and at right side. Each rail comes with two parts for easy and stable…
No supports required. A complete set of 12 cutting guides designed for making clean, accurate cuts in foam pipe insulation. Each guide is optimized for a specific pipe diameter and allows you to make straight 90° cuts, precise 45° miters,…
Template to make it easy to cut shields for the Prusa protective face shield Print instructions Just any filament will do
I have extremely limited counterspace in my kitchen and I wanted to make the most of it, but we use our cutting boards every day and I didn't want them tucked away in a cabinet somewhere. These simple brackets allow you to hide them…
Cutting disc with 6 blades compatible with WR167E - Landroid M700 Plus This is the new version of Landroid with the Hex adapter below the cutting disk. Diameter and total height are the same of the stock cutting disk. Just use M4 standard…
Info: remixed great tool from @vojtz. (thanks!) smaller overall dimensions the slit, space for cutting has the same width (so it is not only simple downscale) bevelled edges hexa bottom structure for smaller filament consumption Print…
The jig is a remixed version of this design: https://www.thingiverse.com/thing:2908391 https://www.thingiverse.com/thing:3062809 Thank you!!! How to do it:…
Just a tool I made to get precisely sized strips of sand paper for the printable custom labeled sanding sticks
Printed with only 3 walls & 5% infill and 0.25mm layer height. Print time 2.5h The opening allows several pipe dimensions to fit, as it is flexible enough to clamp to a smaller size. Edit… Added a model with, internal chamfer, so as not…
CORDILLERA | Cutting-Board Rack Introducing "Cordillera," your kitchen's new best friend. This 3D printed cutting-board rack combines elegance with functionality to keep your cooking space organized and stylish. Say goodbye to clutter and…
Here is a jig for a 42.4mm pipe bend, usually used for railings etc. This jig is made up of two part connected with two M5 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the…
Convenient for removing dust when cutting tiles directly. Suitable for 125mm diameter disc May not fit all angle grinder housings Printing with supports Layer - 0.2 4 walls Filling 25%
I needed to cut some copper rods for a Yagi antenna I'm building. I found GreaseMonkey88's nice design and adapted it for my RYOBI rotary tool and IRWIN clamps. I need to make an arm that fits my RYOBI flexible Rotary Tool head. It's a…
I designed this holder to prevent my cuttings boards from falling over in the cabinet. It fits two cuttings boards with a thickness less than 15mm. It is a relatively short print at 0.2mm layer height and 10% infill. I do recommend to put…
Just made it more easy for printing. Less Overhangs
Cutting guide for your bicycle fork's steerer tube. Inside diameter is 29.1 mm, and the thickness of the blade slot is 2 mm. This should work with most common ceramic/carbon cutting blades. There's a small insert that can be used to…
This is a simple kitchen cutting board holder. It fits 2 20mm and 2 10mm cutting boards. It has a feet on the backside, so it doesn't tip over when the boards are fitted upright. I have used 0.3mm layer height, 20% infill and PLA
This is a remix to accommodate my specific cutting board collection. Attached are the Fusion 360 files so you can can customize your own.
PTFE cutting jig for Stealthburner Rapido, not sure if this will fit any other hotends. In theory it should. Groove will allow you to easily cut PTFE tube to 11mm prescribed in manual. Use utility knife to cut. Place the jig and…
This is a tool to cut the PTFE for Pulley-Body part of the MMU2S, you can use a cutter or any other blade, the appropiate size of this PTFE is 19mm.
Cut PFTE to 43.4 Print instructions Slide in PTFE. Use razor blade to cut. Taper one side to the cut tube.
This is an easily scalable version of Mark Rober's compliant Nerf gun. The main reason for this is that it is flat, so it scales way easier than a version with facets. This means you can also laser cut it! The default scale is fullsize…
#gridfinity This is another part of my gridfinity dremel caddy collection, These 2 trays hold some of the cutter disc/ angle grinder disc commonly used for rotary tools . Since I dont have many of the little cutter discs I've added some…
For how to use this jig, please watch the video here: Print in PLA or whatever plastic you don't mind being basically thrown away (this is a jig that will get cut) If you are having a hard time getting it to feed properly, shave a small…
Same as my previous upload, but just remixed with another slot.
I wanted to make a replacement for 170 pliers cover for transport. Print in petg/TPU for flexibility.
I ran into a problem while cutting a 2020 extrusion profile by hand with a hacksaw. The cut was way out of plane. This jig was made specifically to aid in finalizing edge shape with a dremel tool. It helps to ensure the edge stays…
Simple modellers tool for cutting 90 and 45 angles.
As the model name suggests, this is my first attempt at a pattern to make fully rounded corners on wooden objects. The design cuts well, and looks aesthetically pleasing, and has a decent bend ratio. I was able to bend the 7mm MDF (only a…
This cutting plate is based on similar waffle cutting boards on the market. You will be limited based on the size you are able to print due to your printer. The squares likely are not conforming to the add-on gadgets that other plates may…
Simple jig for cutting accurate angles, mainly for airplane builds. Print instructions Print with PLA. Standard 0.4mm nozzle, 3 perimeters, 20% infill. Layer height 0.2mm recommended. Like this model? Check out my other creations here:…
QBRICK SYSTEM TWO INSERT angle grinder 125mm cutting sanding discs also for 200 cases and XL organisers
A simple template for cutting pipes and fitting legs fits a diameter of 50
new design! you can check out version 2 of my propagation helper! This handy little tool is inteded to go on a mason jar. You'll surely find a fit for your cutting with the differently sized holes: 1 x 3 mm 2 x 5 mm 2 x 6 mm 1 x 8 mm 1 x…
This is a work in progress for the PARKSIDE® Mower robot smart PMRDA 20-Li A1, 20 V This cutting disc allows to double the amount of blades on the mower. I wanted to see how this behave. Hence I decided to build my own. I need to buy…
cap cutting pliers. I've printed it with TPU but can be printed with PLA I think.
This template allows easy cutting of wires for solderless or regular breadboards. SCAD file included in case you want to customize the lengths. Category: Electronics
2020 V-Slot Drill & Cutting Jigs Design Due to lack of space for a proper workshop, I am forced to use basic handtools in order to process my build parts (more specifically 2020/2040/4080c-beams). Having said that, I designed a set of…
Overview Because the original model did not include any information about size, I just recreated the design to fit my needs. My design is optimized for the Cucina & Tavola cutting board ( 20x29 cm and 25x37 cm ) available at Migros but…
This part replaces the original Cameo middle feeder rollers, as they're not providing enough pressure to support vinyl rolls and other materials for mat-less cutting. The problem to be solved There is a significant gap between the base…
Remix that allows to laser cut these radius gauges. I've cut them out from 3mm HDF board, you can use the holder box from the original creator if you'll use 3mm board as well (riginal 3mf of the holder attached). Engrave the blue line and…
I wanted to use the Cartographer probe & CNC carriage with the A4T toolhead which requires removing ~1.8mm from the bottom of the mount. UPDATE: After some testing, it seems like removing the 1.8mm doesn't raise the probe high enough to…
Description As Mammotion's genuine cutting disk has been designed for injection molding, it is not optimized for 3D prints. So, I redesigned it, with 3D printability in sight. It has 6 blades instead of 4 and a protection cover, to keep…
Pipe Cutting Guide: Product Description This Pipe Cutting Guide is a versatile and easy-to-use tool designed to ensure precise, clean cuts on pipes of various materials and diameters up to 50mm. Ideal for DIY enthusiasts, plumbers, and…
I really like the model 395 clamps. I could not find a worktable to go with them, so I created this one. The Clip part is designed to mount directly onto the base of the front mount of the clamps model, sharing the same (or slightly…
Remix of a design on Thingiverse. I made the first slot larger to accommodate a thicker wood cutting board.
Hello Everyone, This is a small tool for cutting PTFE for the AnkerMake M5. Proper PTFE length is a way to prevent filament blowouts that can break your printer. I've purposefully made the channel length longer than your standard PTFE…
Bauanleitung Fräsvorrichtung für die Makita RT0700 Fräse: -Compatible with: dewalt D26204K-QS. Update 20.04.2025: 32mm hole system guide aavakiable as an Add On https://www.printables.com/model/1249568-32mm-hole-system-add-on Update…
Just print it in the normal orientation, no Supports required. I would use at least 3 wall layers for stability. On the bottom are some indents where i glued foam pieces to keep the part from slipping.
A printable HoleSaw drill bit. Suitable for soft materials like foam, if you need a certain size for limited use. This was originally to make circular foam blanks but i decided it might be useful to others as a hole saw, so ive produced…
Here is a jig for a 60.3mm pipe bend. This jig is made up of two part connected with two M8 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so…
Offset Jig for quickly positioning and drilling holes for cutting board or woodworking projects. Holes at 1/2" increments from 1/2" to 3". Check out pixelstoprototype.com for projects or to purchase a physical print!
If you've ever struggled to cut a PVC pipe to create a straight. square end, you need this tool! Yes, you can do the same thing with a piece of paper or even a cable tie, but this makes it automatic and simple! Access to Parametric files…
Ever had trouble with warped plywood on your laser cutter? You're not alone. I've designed a neat little tool to help : a Fixing Pin for your cutter's honeycomb plate. It keeps your plywood flat, so you can get those perfect cuts every…
