Wyniki wyszukiwania: desiccant

Sortowanie

1067 modeli

P
PrintablesRoland Deschain

Desiccant Tray for Bambu Lab AMS

This was a well designed model but I didn't like that it was too tall to use with the stock cover. While I was shortening it I saw room for some improvements so I made the following changes: Reduced overall height just enough to fit the…

Pobrania
18 692
Polubienia
1435
Ocena
4,97
P
PrintablesMikyleee

Bambu Lab AMS Rear Desiccant Refillable Tray

Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…

Pobrania
16 491
Polubienia
2710
Ocena
4,98
P
PrintablesEldon

Bambu Lab AMS Desiccant Tray

README It has come to my attention that there may be a different model of AMS that this 3D model does not fit. Please check if the tabs are the larger or smaller ones before printing. Thanks Not my design but I found a another user who…

Pobrania
14 962
Polubienia
1629
Ocena
4,69
P
PrintablesMalolo

Malolo's Silica Gel / Desiccant Containers

I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…

Pobrania
11 400
Polubienia
2050
Ocena
4,94
P
PrintablesNeedItMakeIt

Bambu Lab AMS Universal Spool Center Desiccant Holder

To print this, use Vase Mode (Spiral) Change line widths from 0.4 to 0.7, increase by 0.3mm to each width setting Use 6 bottoms, this makes sure that the vase has a good connection to the top or bottom. Use ASA/ABS or PETG if you want…

Pobrania
8585
Polubienia
1089
Ocena
4,73
P
PrintablesPsychProd

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Pobrania
7422
Polubienia
1358
Ocena
4,83
P
PrintablesMediaMan3D

Silica - Desiccant Dry Box for Bambu Lab AMS-US Round

This is a remix of SoftFever's middle dry box AND SamH's remix for AMS that works with round hygrometers that are available on Amazon in the US. Use the top from SamH's remix project. Updated 10-20 Added indent to back wall for AMS roller…

Pobrania
6562
Polubienia
1031
Ocena
4,9
P
PrintablesValRC

DRY BOX for 3D Filament: Hygrometer, Desiccant, Direct Printing!

Print your own 3D printer filament Dry Box! Check out this video I made about it, including assembly instructions: Parts are optimized to work best with PLA filament. Easy printing, no support material needed. Snap-fit rollers, hygrometer…

Pobrania
5346
Polubienia
596
Ocena
4,76
P
Printablesmuddtt

New Bambu Lab Silica Gel Desiccant Tray

Created a new Silica Gel Desiccant tray for the Bambu Lab printer. I think there must've been some revisions on the AMS unit because the trays I've tried on this site don't fit because the ribs are too long on my AMS. I tossed a rubber…

Pobrania
5167
Polubienia
587
Ocena
4,93
P
PrintablesTomek

Super fast silica gel desiccant spool container - vase mode

About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…

Pobrania
4611
Polubienia
812
Ocena
4,88
P
PrintablesLucoot

Bambu Lab X1 AMS Front Desiccant Holder

Should fit V1-V3 of the AMS. Printed in Black ABS. Sensor version needs support. Brim recommended since it is tall and narrow. Update: Version 2 w/increased desiccant volume.

Pobrania
4261
Polubienia
379
Ocena
4,87
P
PrintablesMartinSpajaard

Bambu Lab AMS Desiccant Tray adaptation

There is no need to follow the curved form of the bottom of the Bambu AMS. So this is a straightened version of Eldon's model. It has a bit more volume, is easier to print, no supports needed!, and I designed a stand to fill the trays to…

Pobrania
3987
Polubienia
469
Ocena
4,3
P
PrintablesTek

Creality K2 Plus CFS desiccant box + optional lid

Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…

Pobrania
3967
Polubienia
382
Ocena
4,6
P
PrintablesSHQ

TechTom's Rear Desiccant Silicagel Tray for AMS

This is arguably the best tray for desiccant beads for the AMS of Bambu Lab. The lid has a recessed grip where a lamella of the tray sticks through. this allows to easily take out the entire tray including the lid but without the risk of…

Pobrania
3768
Polubienia
504
Ocena
4,94
P
Printablesdteng

Desiccant Box for Creality Space Pi Filament Dryer

This desiccant container fits inside the Creality Space Pi (single-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a double-spool…

Pobrania
3563
Polubienia
579
Ocena
4,93
P
PrintablesDarthxRinzler

Bambulab AMS Hydra PRO Silica/Desiccant Dry Boxes

I redesigned them mostly from scratch to make them slimmer and fit in th AMS with the new Hydra Pro mod. They're about half the size and fit in the Hydra Pro AMS like a glove. The convenient knurled tab on the back make it a breeze to…

Pobrania
3302
Polubienia
305
Ocena
5
P
Printableskennyd1gital

Filament Spool Desiccant Canister

A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…

Pobrania
3294
Polubienia
432
Ocena
4,93
P
Printablescmyk

Desiccant Spool Container with a twist

I needed a better desiccant container solution for my cereal box spool containers. Most models take too long to print and do not have enough holes. My design is 45% nothing. Meaning holes. Meaning air can flow freely. It uses 14g of…

Pobrania
3177
Polubienia
1149
Ocena
4,5
P
PrintablesUnchainedAi

Silica Desiccant Dry box for Bambu Lab AMS - Airways for Hydrometer and Resized Lid

After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…

Pobrania
3173
Polubienia
369
Ocena
4,88
P
Printableschuyskywalker

Bambu Labs Spool Desiccant Carrier

Strongly recommend this remix/remodel ------------------------------------------------------------------------------ A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.…

Pobrania
3004
Polubienia
329
Ocena
4,95
P
Printableschuyskywalker

Desiccant Spool Tumbler

A remix/remodel desiccant holder. My original model isn't ideal because when you swap it, you risk spilling the desiccant. Humebean's model is far more ideal because it has an inner lid, but I wanted to make a few tweaks. Uses 3d printer…

Pobrania
2967
Polubienia
414
Ocena
4,94
P
Printablesstarfalk

Sunlu S4 Desiccant Box

A desiccant box with lid for the Sunlu Filamantdryer S4 I printed this in ASA to prevent melting. According to @avastro_56112 PETG works well without warping. Thanks for the Information! Printable without supports. Please let me know if…

Pobrania
2942
Polubienia
449
Ocena
4,96
P
PrintablesIsaacW

Desiccant Box

Update: 2024-02-25 – I added a new version of this model with a small lip around the edge, where the lid and body meet. This makes it easier to remove the lid, but still provides a nice snap fit like the original.…

Pobrania
2802
Polubienia
281
Ocena
4,94
P
PrintablesEDGE_OF_3D

PolyDryer Desiccant Funnel

A quick printing funnel to aid in filling the desiccant holder of the Polymaker PolyDryer Dry Box. Balances the holder when filling, quick to print, oriented for proper printing, print in any material, no supports needed.

Pobrania
2655
Polubienia
537
Ocena
4,95
P
Printablesdteng

Desiccant Box for Creality Space Pi Plus Filament Dryer

This desiccant container fits inside the Creality Space Pi Plus (double-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a single-spool…

Pobrania
2652
Polubienia
475
Ocena
4,87
P
Printableshexvolt

PolyDryer Extra Desiccant Container

Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…

Pobrania
2545
Polubienia
446
Ocena
4,96
P
Printablesbiketiger

DESICCANT CONTAINER

Designed to fit inside center hole of filament spool in storage. Prints with no support necessary.

Pobrania
2404
Polubienia
276
Ocena
4,89
P
PrintablesS.ID

Bambu Lab Filament Spool Desiccant Holder _AirMax.1

It is designed to be used together with the filament spool inside the AMS to create the maximum exposure of the desiccant to the internal air. Model shown in the photo : Material: PETG Printer: Default setting Bambu Lab filament spool…

Pobrania
2401
Polubienia
238
Ocena
4,7
P
PrintablesJBFuller

Creality CFS Slim Carboard Spool Adapters w/ Desiccant Holder and RFID Tag plate

I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…

Pobrania
2299
Polubienia
396
Ocena
4,38
P
Printablesanimatorgeek

Improved Fast-Printing Screw-Top Desiccant Container (v2)

This is a new, improved version of my original vase-mode desiccant container. I changed the side holes to extend inward rather than outward, so the outer surface is much less likely to poke holes in your filament storage bags. Total print…

Pobrania
1968
Polubienia
464
Ocena
4,95
P
PrintablesMediaMan3D

Silica - Desiccant Dry Box for Bambulab AMS

Silica Dry Box for BambuLab AMS with rectangular hygrometer and vertical slots. Updated 10-20: Added indent to back wall for AMS roller fix from 'dietrich'. Also added the original lid for convenience. Updated 10-18: Updated with vents…

Pobrania
1913
Polubienia
286
Ocena
4,74
P
Printablesaxis

Creality Space Pi Desiccant Box

To print this, use Spiral Vase mode. Change line width from 0.4 to 0.7 (increase by +0.3mm to each width settings). I used ABS , when choosing the filament take into consideration the dryer can heat up to 70c. I designed this desiccant…

Pobrania
1811
Polubienia
397
Ocena
5
P
PrintablesSimon

In Spool Desiccant Container and Funnel

A nice design for a desiccant container that fits in most spools. It has a hollow core to maximise the exposure to the contained desiccant. Each container takes about 50g of 3-5mm desiccant. Print the pot at 0.2mm layer height with 2 wall…

Pobrania
1681
Polubienia
503
Ocena
4,71
P
PrintablesJorge

Desiccant container for Spool

In the first use of the AMS of bamboo, I found that the humidity level was very high, so I put all the bags of silica I had inside it and try to solve the problem. After having dried all my material in an oven at 60ºC, yes, I know it is…

Pobrania
1660
Polubienia
298
Ocena
5
P
PrintablesEd

Bambu Labs AMS desiccant box

This is a remix of Eldon's box, I wanted it printable flat with no supports. I also don't mind not using the default screen door so I can see if the desiccant has changed colours (I used a colour changing desiccant).

Pobrania
1657
Polubienia
229
Ocena
4,56
P
PrintablesPernstar

Bambu Lab Spool Desiccant Core

Aite. Didn't like the available desiccant pills I found, so I just made my own. I suggest making them from PETG. 2 reasons: 1) they can stay in the spool when you dry filament at up to 70 C 2) they will be flexible enough so the detents…

Pobrania
1624
Polubienia
262
Ocena
4,78
P
PrintablesKato22

Combined Desiccant Cup / Hygrometer Mount for Filament Dry Box

A combined desiccant and hygrometer holder that slips into the pour hole of the lid of a plastic dry goods box. I like this approach as it is neater than using baggies. With this setup, I can get internal humidity down to 10-15%.…

Pobrania
1589
Polubienia
250
Ocena
4,33
P
Printableshtkoca

Redux Bambu Lab Silica Gel Desiccant Tray - For New AMS v3

Remixed with bottom chamfers for better bed adhesion. No supports needed Fits new AMS ribs. Use a rubber band to hold the sides together Original model by @muddtt had fillets, which was a pain to print with ABS and other materials…

Pobrania
1579
Polubienia
127
Ocena
4,91
P
PrintablesJager

Desiccant container for Creality Space Pi Plus

Desiccant container for Creality Space Pi Plus. ~ 300-350g. silica gel

Pobrania
1538
Polubienia
278
Ocena
4,85
P
PrintablesMortalWombat

Bambu Lab X1 AMS Desiccant Container

Bambu lab thoughtfully included space in the AMS to store desiccant packs, but packs aren't ideal. If you've got a lot of filament lying around, chances are you've got some storage system that already utilizes reusable desiccant beads.…

Pobrania
1523
Polubienia
246
Ocena
4,5
P
PrintablesJorge

Desiccant container for Spools

This is a more universal version of the "Desiccant container for Spool" model originally made for Bambu Lab spools, which in turn was based on the model created by Gdrag . This container can hold the silica bags that usually come with new…

Pobrania
1502
Polubienia
313
Ocena
4,82
P
PrintablesBeat The Layer

CFS desiccant holder

Description This is a holder for Desiccants in your CFS. I have my own mounted with a couple of Power Strips, and it seems to stay there :) I have included a .3mf file for the K2 Plus, and also a .step file if you want to slice it with…

Pobrania
1432
Polubienia
121
Ocena
4,83
P
PrintablesLucoot

Bambu Lab X1 AMS Bottom Desiccant Holder

Printed in black ABS with support. V1 - First Publish

Pobrania
1402
Polubienia
131
Ocena
4,82
P
Printablessquidball

Second Desiccant Container for PolyMaker PolyDryer

Update v2 (Sep 14 2024): Due to popular demand, version 2 now features vertical grill vents and removes the arrow tabs on the cover. While version 1 works for most, some encountered printing issues, which this update addresses.…

Pobrania
1399
Polubienia
184
Ocena
4,53
P
Printablesschiko

Creality Space Pi Desiccant (Silica Gel) Dry Basket

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … The basket fits exactly into the Creality Space Pi filament…

Pobrania
1361
Polubienia
215
Ocena
4,87
P
PrintablesR985

High capacity desiccant bin for Qidi Box - updated

Update 10/19/2025: Some users have noticed that some brands of desiccant granules are small enough to fit through the slots of the original design. I've revised the design with narrower slots. I've tested the revisions with several brands…

Pobrania
1359
Polubienia
162
Ocena
4,87
P
Printableshunkoys

Easy Access - AMS Desiccant Box

Top Remixes Larger Version of Easy Access - AMS Desiccant Box - Remix Set by ken830 | Download free STL model | Printables.com Easy Access - AMS Desiccant Box Remixed by MR-52 | Download free STL model | Printables.com Easy Access - AMS…

Pobrania
1351
Polubienia
168
Ocena
4,92
P
PrintablesSThane

Sealed AMS Rear Desiccant Tray

After printing a couple other models that didn't seal properly, I decided to pick a well-designed model and make a few changes to seal it as much as possible. There are thee versions of the tray: The first version is meant to be printed…

Pobrania
1314
Polubienia
184
Ocena
4,84
P
PrintablesTsukemono

Polymaker Polydryer Desiccant Holder

Two of these fit snugly in the lid of the plydryer box. When loaded with desiccant they will not fall out and installed they leave room for the filament roll to spin freely. To make the mesh on the lid you must use a modifier shape with…

Pobrania
1235
Polubienia
230
Ocena
4,83
P
Printableschris.d

Desiccant Box

Update 1/22/2021 Added V3 box and Lid to make the snap more secure, but warning it is near impossible to get the V3 apart and will most likely break the snap on the lid when trying to separate. I never open them once filled, but if you…

Pobrania
1204
Polubienia
135
Ocena
4,92
P
PrintablesEnRiON

Spool Desiccant Holder (Bambu Lab AMS Compatible)

UPDATE: 09/08/24 Added variant for eSun cardboard spools (AMS SDH Body eSUN - Cardboad Spool). UPDATE: 29/04/23 Added labeling to the SDH Cap (SDH Cap - Labeled) to prevent accidental spills of silica-gel beads during removal. DESCRIPTION…

Pobrania
1169
Polubienia
137
Ocena
4,67
P
PrintablesPlasticMelters

anycubic ace pro desiccant container kobra3

designed in 2 halves , everything can be printed on one bed if printing on kobra 3 with pla+ load my 3mf file and slice it, supports come off easy each half will hold ½ cup of silica gel beads, could be also just filled with desiccant…

Pobrania
1148
Polubienia
113
Ocena
4,4
P
PrintablesDzzD

Bambu Lab X1 Desiccant Case

Removable case for unpacked silica gel for the Bambulab X1 AMS, fit into original desiccant case. Use original case cap. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less preferably No support Fill with silica gel, preferably with…

Pobrania
1058
Polubienia
106
Ocena
4,6
P
PrintablesSimon

Desiccant Drying Trays for the Creality Space Pi Filament Dryer

First things first; make sure you have a filament that is suitable for the max temp of the dryer (70°C according to Creality) plus a margin to account for the heat being greatest at the back near the exhaust vent. Any filament with a…

Pobrania
1046
Polubienia
265
Ocena
4,83
P
PrintablesMediaMan3D

Silica - Desiccant Dry Box for Bambulab AMS-US

This is a remix of SoftFever's middle dry box for AMS that works with the hygrometers that are available on Amazon in the US. The same top is used from the original project. Updated 10-20 Added indent to back wall for AMS roller fix from…

Pobrania
1044
Polubienia
179
Ocena
4,85
P

Lock-in-place in-spool desiccant (silica gel) container with optional hygrometer

This model inherits the characteristics of PsychProd's original model: Fast print speed due to the clever basket design, great air permeability, and the option to add space for a hygrometer. In-spool locking: The one thing that bothered…

Pobrania
1011
Polubienia
191
Ocena
4,87
P
Printablesken830

Larger Version of Easy Access - AMS Desiccant Box - Remix Set

Also available with ready-to-go print profile at MakerWorld for your convenience. This is a two-box set that completely fills out the available space between AMS first stage feeders. First, the boxes are lengthened (vertically taller than…

Pobrania
1011
Polubienia
75
Ocena
5
P
PrintablesWorkPlayRest

"Best" Remix: Improved Lid, Latches, Desiccant Holder, Nut, Filament Hinges, Original or TPU Gasket, Round Hygrometer, Filament Top Feed

The original design is good. However, I am an engineer so I designed a few improvements for the design (make it more functional, less filament, repairable, etc) and saw several people in the original and remix comments had some good ideas…

Pobrania
984
Polubienia
162
Ocena
4,92
P
PrintablesChris

Yet another Bambu AMS desiccant tray

Yet another one of these - why?! I thought the original was well drawn but there were a few things I wanted to change. 1 - Make the walls a little beefier, 2mm thick 2 - Have the lid lock in place without a rubber band. None of the…

Pobrania
977
Polubienia
114
Ocena
4,88
P
Printableswarpster

Filament Spool Desiccant Holder

A desiccant holder that lives in the center portion of the spool. It will fit spools with a center hole diameter from 53mm and ~64mm and a spool width of 53mm to 69mm. My goal was to fit both the Bambu Lab spools and the eSun spools. It…

Pobrania
973
Polubienia
140
Ocena
4,87
P
PrintablesJoesTinman

Sunlu S2 Desiccant dryer tray - Faster print

I liked the idea of the original but because of all the small holes it takes forever to print. This version uses horizontal slots in the sides and also an interlaced bottom, making it print in about half the time of the original. I also…

Pobrania
969
Polubienia
134
Ocena
5
P
PrintablesEvaMika

Sunlu S1 Filament Dryer Silica Desiccant Box

Its a fairly easy print. Box and a lid separate. I have designed it for 0.6 nozzle. (But other size nozzles will work) 0.4 layer height works great. You'll need to drill one 4-5mm hole at the back of the lid to fix the box in. How to best…

Pobrania
928
Polubienia
239
Ocena
4,76
P
PrintablesGriff

Silica Gel (desiccant) or Weight Spool Holder - Adjustable - REMIX

This model is a remix of a model by humebeam . I remixed it to add holes along it's length for potentially more airflow through the desiccant inside. Even if it doesn't help, it surely doesn't hurt anything. The holes don't interfere with…

Pobrania
917
Polubienia
115
Ocena
5
P
PrintablesEngMike

Thin desiccant box

Remix created to make the box thinner and narrower. Specifically designed to fix in the EZY 18L Waterproof storage box with 1kg spools on top.

Pobrania
907
Polubienia
103
Ocena
5
P
Printablesshane.t

In Spool Desiccant (SIlica Gel) Container with Hydrometer (or without) NO SUPPORTS REMIX

UPDATE 7/9/2020: Thanks for the comments here are the printing instructions - Print the containers close end down. Non-Hydrometer lid the closed side down. The hydrometer lid print with grip side up. UPDATE 7/1/2020: -Added…

Pobrania
878
Polubienia
138
Ocena
4,88
P
PrintablesTheTexMech

v4.2 bambu ams dryer desiccant pods for AMS hydra 2 rows NO SUPPORT Hygrometer Thermometer Humidity Stand

Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…

Pobrania
877
Polubienia
109
Ocena
4,6
P
Printableskyleisah

Eibos EasDry Desiccant Bucket

This is a complete rework of an existing container @Matten79 made, that I have adapted for silica gel / desiccant rather than Calcium Chloride. It features a sturdy and printer-friendly design, multi-body lid so infill can be used to…

Pobrania
868
Polubienia
218
Ocena
4,98
P
Printablesmsatbsx

Banana Container For Silica Gel - Desiccant with filament locking.

The 1 problem: Traditional jar-like containers often get in the way, or the desiccant ends up separated from the filament when wrapped in foil. Solution: The Banana Container, with its sleek, banana-like shape, fits into the carton box…

Pobrania
859
Polubienia
161
Ocena
5
P
PrintablesMisterJ

Creality CFS Silica/Desiccant Box

Please don't forget to hit the like button when you find this model useful. Use your own silica gel beads using this box which fits inside the original spaces of the Creality CFS. Unlike other models I have included an "air tunnel" for…

Pobrania
847
Polubienia
85
Ocena
5
P
Printablesjornamon

Silica Gel Desiccant Box for Sunlu S2 Filament Dryer

Enhance your Sunlu S2 filament dryer's performance with this breathable silica gel desiccant box. Designed to perfectly fit inside your Sunlu S2, this box needs no additional hardware or modifications. The box is designed to hold either…

Pobrania
844
Polubienia
132
Ocena
4,71
P
PrintablesLes Kaye

500g(1lb) Silica Gel Desiccant Box

500g(1lb) Silica Gel Desiccant Box (Updated October 2019 with 1mm thicker sides to make it stronger and easier to print) Box to contain 500g of colour indicating silica gel for your filament dry box. The dimensions without feet are 155mm…

Pobrania
837
Polubienia
94
Ocena
4,9
P
PrintablesGoodHope

Top cap for high capacity desiccant bin for Qidi Box

Designed it to keep desiccant in place incase of removing it from Qidi Box Compatible model can be found here https://www.printables.com/model/1386559-high-capacity-desiccant-bin-for-qidi-box and with smaller holes…

Pobrania
828
Polubienia
60
Ocena
4,89
P
Printablespaw3D

Desiccant Bin for Filament Storage 2026 (Remix)

General The original Filament Storage 2026 desiccant bin is designed to be assembled once and not come apart again. This works as long as (a) the option is available to dry the desiccant inside the bin, and (b) the part is printed from a…

Pobrania
826
Polubienia
115
Ocena
4,95

BAMBU LAB X1C - P1P - P1S AMS SIDE DRY DESICCANT BOX + DESICCANT FUNNEL

I designed these side dry boxes to have extra grams of desiccant in the ams. Humidity is the killer of the quality for our prints so I thought I would use that little space in the corner of the ams to increase the amount of desiccant.…

Pobrania
807
Polubienia
96
Ocena
5
P
PrintablesIsaacW

Desiccant Box - Improved

This is an improved version of my original desiccant box . There were some comments about the lid being hard to get off, so I added a small lip around the lid to help with that issue. I recommend printing in PETG or potentially ABS. You…

Pobrania
798
Polubienia
78
Ocena
4,92

Qidi Box Desiccant Vessel - Qidi Q2, Qidi Plus 4, Qidi Max 4 compatible

This model is a large capacity desiccant vessel for the Qidi Box. It's best filled with a funnel or chute with one of the side plugs installed and before installing it in the printer. It keeps the box much dryer than the original packets.…

Pobrania
794
Polubienia
132
Ocena
4,78
P
Printablesfamichu

Exchangeable desiccant case for the Sovol SH02

This is a desiccant case for the SH02. It can be used with silica gel larger than 1.5mm in diameter. NOTE: Please print it in 0.15mm layer height without supports. Added 1.0mm gap models too(January 20th , 2025)

Pobrania
787
Polubienia
102
Ocena
4,87
P
PrintablesTinkrMakr

Desiccant Silica Hygrometer Spool Container Modular

Modular desiccant/silica filament spool size container. Optional top to hold Hygrometer. I like to store one to five roles of filament in a ziplock vacuum seal bag. I wanted a desiccant holder that could grow or reduce depending on how…

Pobrania
775
Polubienia
130
Ocena
4,92
P
PrintablesPsytropomorph

Sunlu S4 Desiccant (Silica Gel) Dry Basket - Layer Separation Fix

When printing the beautiful original model by schiko in ASA, I experienced issues with layer separation - perhaps due to the cold environment, which prevented the build volume to heat up sufficiently. Nonetheless, I decided to do some…

Pobrania
774
Polubienia
123
Ocena
4,96
P
PrintablesLucoot

Bambu Lab Filament Desiccant Holder

Note: I printed in ABS which works nicely but PLA seems too tight and hard to remove due to less shrinkage. V2 with PLA considerations on the way. The holder contains three parts. A threaded lid closes the desiccant compartment and the…

Pobrania
769
Polubienia
195
Ocena
4,92
P
PrintablesApok84

Front Mounted CFS Desiccant Holder

26Jan2026 Update: I received some feedback that the V3 larger volume holder was rubbing on the top edge. So I trimmed 3mm off of the back edge to provide more clearance, and I made the lid tabs smaller to reduce the potential for them to…

Pobrania
748
Polubienia
84
Ocena
4,91
P
PrintablesTony Tsai

Fast and Stronger Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

Pretty much the same as: https://www.printables.com/model/67857-fast-print-in-spool-desiccant-silica-gel-container But increased the overlap to make the wall stronger without impacting print time. You can see this in the 4th picture that…

Pobrania
744
Polubienia
90
Ocena
5
P
PrintablesMisterJ

CFS Front Desiccant Box

Please don't forget to hit the like button when you find this model useful. Silica gel desiccant containers for in the front of a CFS. Fits seamlessly at the front of your CFS. Hold about a total of 120 grams of desiccant Print in two…

Pobrania
729
Polubienia
98
Ocena
5
P
Printablesmak77

MAK Gun Safe Desiccant Container

Keeping low humidity in a gun safe is important. This little container will help fulfilling that task. Best is to use few dehumidifiers in different places of a safe. Print out the STL files and glue in four magnets (6 x 3 mm neodymium…

Pobrania
727
Polubienia
126
Ocena
4,86
P
Printablesnem

Small compact sliding desiccant box

A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)

Pobrania
714
Polubienia
213
Ocena
5
P
PrintablesMiklas

desiccant bin for Qidi Box "with smaller holes"

Improved Qidi Box Desiccant Bin – Reduced Hole Size + 3 Variants This is my remix of the awesome silica gel holder originally designed by @R985_3546396 . His model works great and fits perfectly in the Qidi Box — but after printing it, I…

Pobrania
711
Polubienia
66
Ocena
5
P
Printablesrplanier

Desiccant & Small Parts Container with PET Bottle Cap Size PCO1881 Lids (Multiple Sizes w/ STEP)

I needed a desiccant container that was both small and strong enough to throw into an ammo can with bulk loose ammo. There are many desiccant containers but most are either too fragile or designed for certain dimensions that did not meet…

Pobrania
710
Polubienia
114
Ocena
4,86

PolyMaker PolyDryer Desiccant Container dryer box

Wasn't happy about drying Desiccant in our oven which is used for food, so I made this box for our Polydryer You turn the top to dry or empty the container as you can see in the pictures. Printes i PLA. 15% Infill 0,2 layer hight

Pobrania
699
Polubienia
126
Ocena
4,93

Desiccant Container - Prusament Filament Spool

New size added as requested by Peter H. to fit 50mm wide spools. Files for this are titled “Desiccant Container - Filament Spool 47Dx50Hmm”. 0.20 Layer height gcode (works well with either) and 3MF file added. Do you want to modify a…

Pobrania
693
Polubienia
108
Ocena
4,84
P
PrintablesPhil Hsu

Desiccant box for Bambu Labs AMS

For Bambu Labs AMS. Can place flat on print bad. Enhanced structure.

Pobrania
685
Polubienia
47
Ocena
5
P
PrintablesMichal

Silica Gel / Desiccant Containers

Silica gel / desiccant containers to help You store Your filaments in dry conditions. This is a remix of Malolo's containers, main differences are lid which now contains slot for a hygrometer and reworked container heights. In differences…

Pobrania
679
Polubienia
149
Ocena
4,89
P
PrintablesJose R

Full Desiccant Spool Holder for Dry Box / AMS with Hygrometer (UPDATED v02)

The full spool filament desiccant container is designed to hold comfortably 2 pounds of silica gel beads (leaving 30% headspace in the spool). The idea here is to maximize the amount of silica gel in the AMS while minimizing the number of…

Pobrania
655
Polubienia
117
Ocena
5
P
PrintablesCC3D Projects

HDRY System Upgrade - Desiccant Loop Dry Box UPGRADE (V1 - Work in Progress)

A Desiccant Loop Silica Gel Box for HDRY System Check the HDRY System here: https://www.cc3dprojects.com/cc3d-hdry-system This is a ventilated silica gel box designed to improve moisture absorption inside your HDRY setup. Learn more: The…

Pobrania
649
Polubienia
249
Ocena
3,67
P
Printablesslipangle28

Inside Spool Desiccant Canister

A pretty run-of-the-mill desiccant container. Remixed based on Tenshe's design because the 2mm silica gel beads were too small and fell through the top and bottom holes. I also didn't need the space for the hygrometer, so I was able to…

Pobrania
645
Polubienia
61
Ocena
4,91
P
PrintablesBrody

SUNLU FilaDryer S4 Desiccant Holder

SUNLU FilaDryer S4 Desiccant Holder. FilaDryer S4 comes with two spots that allow for desiccant. I was worried the desiccant would fall through the slots in the container so I created a smaller container that fits in place that has 2mm…

Pobrania
638
Polubienia
112
Ocena
5
P
PrintablesJustin

Silica Desiccant Container (fits inside spool)

Why should I use this desiccant container? It's sized to fit into any spool from .5kg and up. It uses much less desiccant while also maximizing the water absorbing surface area. The desiccant can be rapidly dried in a microwave,…

Pobrania
636
Polubienia
79
Ocena
4,7
P
PrintablesBraheem24

Bambu Labs Front loading desiccant boxes for AMS with Hygrometer fits without removing filament.

Front loading desiccant boxes for AMS. These slide in and out without having to remove the filament to change out the desiccant and I also added a hole for an hygrometer. Hygrometer I used is 44mm in diameter…

Pobrania
622
Polubienia
71
Ocena
4,33

Desiccant tray for Creality Space Pi Plus

This is a custom-designed desiccant tray that replaces the original lid of the silica gel compartment in the Creality Space Pi Filament Dryer Plus. The tray allows you to use your loose silica gel, eliminating the need for buying silica…

Pobrania
614
Polubienia
122
Ocena
5
P
PrintablesMoragor

Desiccant container for Ikea 365+ 10.6l box

This is a simple desiccant container that fits into an Ikea 365+ 10.6 liters box (or similar sized/larger boxes of your choice). The lid is held on by clips (I recommend two) to make it spill resistant. Dimensions are approx. 150x64x58mm…

Pobrania
611
Polubienia
115
Ocena
4,89
P
PrintablesTony Virelli

AMS Desiccant Tray with Nub

This version has a nub to grab and unlike Rose 3D's version, this fits in the AMS using the factory AMS lids. Make sure and share your makes and if you like it please give it a ❤ LIKE!

Pobrania
606
Polubienia
73
Ocena
5