415 modeli
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
This is a replacement dimmer knob for one that was broken. Print instructions Print with a brim. No support needed otherwise. I printed at .15mm resoution.
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors (this one) Shelly box for inline flex wire and wago 221 connectors Shelly box for 2x flex wires…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors Shelly box for 2x flex wires and wago…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors Shelly box for 2x flex wires and wago…
This is an LED light bar for a Original Prusa Mini. This light bar is powered by a 12V power supply and can be dimmed. It mounts to the top of the Z axis using two M5x35 flat head screws. The stock screws are M5x15 button head. The…
This is an adapter plate for the Philips Hue Dimmer v2. It fits on Busch Jaeger wall switches using only the clip of the switch. It is a remix of https://www.thingiverse.com/thing:2905340 by Hoelle and…
Modified LACK enclosure for Prusa MK3 with an embedded thermometer and LED dimmer. This remix modifies the top corner pieces so that a thermometer can be put inside the left leg piece and a LED dimmer inside the right leg piece. Warning:…
Inner part to fit Aquara Dimmer EU H2 into Gira Frame. By resizing of the inner negative form it can be adjustet to different switch types
Unfortunately I can't give the exact name of the model of the light switch because it was already so old ;) This is my Lightswitchdimmer. It is a replacement for your normal dimmer of the lights switch. I made it because I have a dimmer…
My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…
A bracket for mounting Shelly 1 PM plus, Shelly Dimmer 2 on back of Gira System 55 Switches and Sockets Shelly Plus 1, Shelly Plus 2PM and Shgelly Plus i4 should also fit but is not tested…
The Philips Hue dimmer switch V2 holder is attached using double-sided adhesive tape Pay attention to the polarity of the magnet, because there are two magnets on the original controller, each of which is turned in the opposite direction.…
This is a replacement knob to fit Lutron-type dimmer slide switches. Height of knob can be adjusted to user preference. Print Settings Printer: Monoprice Maker Select v1 Rafts: No Supports: No Resolution: 0.1 Infill: 100% Notes: Sliced in…
First of all I want to thank @ Nelovy_08 for the model he provided. I remixed the model since I needed a bracket to hold a shelly plus 1 PM - 2 PM, also gen3, dimmer, i4 (and other shellys with the same shape) with the “plus Add-On”. The…
A 1:1 replica of the real life A320 Dimmer Knob that sit underneath the Glareshield. Files include multiple objects that are different colors. Print with black and white PLA. Designed to mount on a standard 6mm potentiometer shaft and…
Simple DIN Rail Mount for Schneider Wiser switch and dimmer modules. Modules can be stacked next to each other while keeping a 5mm gap between them, to allow better airflow. Print settings: Printer: SecKit SK-Go² Material: PETG Supports:…
This slim Philips Hue Dimmer Switch Plate has an integrated pocket for a metal disk or washer (1 x 19mm). Two design files included, one with mounting screw holes and one without.
Phillips Hue Dimmer v2 Battery Cover Lost or broke the small battery cover on your Hue Dimmer v2 like I did? Well you're in luck because I couldn't find any replacement parts before I made this one, so I guess you're welcome! It's a very…
Print as you wish. I didn't make the knob empty inside because I wanted to make it more sturdy for PLA.
Remix of nikke845's under desk dimmer holder. I wanted to mount it on a glass desk, so I removed the screw holes and added a bit more surface to be able to glue it with double sided tape under a desk. Print Settings Printer Brand:…
Enclosure is inspired by following things https://www.thingiverse.com/thing:1075568 and https://www.thingiverse.com/thing:1075568 . Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution:…
A replacement knob for old style dimmer switches. Inner stem diameter is 6.28mm, not including notch cutout. I'm not certain that this is the correct measurement as I made this for someone else and based measurements on a broken knob. If…
This is a super-compact case for Shelly Dimmer 2's. It's designed for a 2-wire Lamp Installation so you can ditch expensive "smart bulbs" and use cheap dimmable LED globes or decorative Dimmable LED globes instead. You just need 4…
This lets you mount your Hue Dimmer (v2) inside a double Elko Plus frame. Since the new Hue Dimmer has a magnet inside i designed this to mount tho allow the dimmer to be partially proud of the adapter. The Dimmer fits snugly inside the…
My Shelly Dimmer 2 enclosure, designed as part of this video: Designed for Shelly Dimmer 2, but may fit other Shelly products too. Hardware Use 2 x countersunk M3x12 machine screws to secure the case halves. Top & Bottom is a tight fit,…
Sometimes you might want to mount your Hue dimmer somewhere a little different, like on the aluminium mic stand in the picture! Pictured is the V2 Dimmer - you know you have this if it says “Hue” on the lower button EDIT 16th Feb 24:…
I have installed a Hue smart lighting system throughout my home however I have not wanted to completely remove the existing light switches and I still want to maintain occasional access to the switches in order to reset bulbs.The main…
Adapter that enables usage of ABB / Busch-Jaeger dimmer knobs (6mm) on dimmers with 4mm shaft (e.g Elko compatible). I created the adapter to mount ABB Jussi knobs from previous dimmers on MicroMatic MicroDim ZB250 zigbee smart dimmers.
Intended for use with the Gulfcoast Robotics Premium White LED Light Bar, this printable dimmer switch bracket provides a simple, yet clean mounting solution. It's compatible with 4040 (40mm) wide dual slot V-extrusions. used on the on…
A knob with a flat surface instead of curved, it is also thicker so that the insides do not show through the surface. As well as an extended connector that touches the bed while printing for better results. The tightener that comes with…
Dimmer Button Busch Jäger Printer MK3s MMU2s Printed with MMU PETG Colors white and transparent Also can be printed with filament change at 8.6 mm
This IKEA Tradfri dimmer holder serves two purposes. - mount the Switch to the wall - avoid switching off the power with the “old” wall switch GIRA brand Wall switch with an opening of 55mm x 55mm It's designed to work with a 6mm magnet…
2000W dimmer inline box enclosure. Please be careful when working with mains.
Covers a standard UK light switch and holds the Philips Hue Dimmer and mount I wanted a cover where i could use the existing Hue mount that came with the Dimmer and not redesign the shape or find suitable magnets to hold the remote Once…
Idea I wanted a way to mount the remote to my desk (built out of 4040 aluminium extrusions). Additional Components 1 Magnet 6x3mm (but up to a length of 6mm should be fine) To Mount: 2 screws M5 button head (ISO 7380) Maybe some glue to…
This model is a knob for a dimming light switch. The center post has a diameter of 0.25" and is in the shape of a D.
philips hue dimmer switch ikea skadis
Schneider Exxact Dimmer Knob
Frame with modified holes for EU electric boxes that we all have at home. Just take out the original switch, connect the wires underneath and screw the frame in place. You can then normally click on the Philips hue cover plate with the…
Bracket can be stuck to walls or furniture with double sided tape Print settings: no supports 0.4 nozzle 0.20 mm
An adapter plate to reuse the original HUE Dimmer faceplate on top of an existing “normal” lightswitch. The old “normal” lightswitch cover has to be removed. Place this adapter plate with the original mounting hardware in its place and…
I have a gridfinity organizer on my dresser. I created this model so I'd have a spot to mount my Hue dimmer switch. The model printed in the pictures was printed with Solutech PLA and a 0.6mm nozzle at .36 layer height.
WARNING: Removing a wall switch means dealing with 230V live wires. Do not do this if you are in any way unsure of what you are doing. You can hurt or kill yourself! If you are unsure, get an electrician to help you! I changed my ceiling…
In a new house I've been moving some light switches, and one dimmer is without a knob on the slider. A classic application for 3D printing. Rather than design a new one, I found @kg333's fine model and started there. I'm a fan of…
Replacement of standard Jung AS500 socket frames to use the Philipps Hue dimmer switch V1. I made three versions for single, double and triple frames. The versions for double and triple frames are designed for a plug in the lower hole and…
This lets you mount the Phillips hue dimmer switch plate on top of your existing light switch by replacing the switch cover plate. This is designed specifically for light switches that are common in the US. (Sorry, not for paddle…
Holder til Philips Hue Dimmer Switch, der passe ind i FUGA designet. Lavet som indsats der passer ind 2-moduls rammer, og som rammer der ligner Baseline50 rammer. Baseret på design idé af Jes Holger Sørensen . Bemærk at der er kommet en…
EN: If you don't want to pay 70€ for a friends of hue switch from senic and gira , but want the “gira-look” you can print this adapter plates. All you need to buy is a GIRA double frame without middle bridge (either GIRA 100203 for…
Dimmer Knob Replacement This is a 3D-printable replacement knob designed to fit Gira dimmer switches. It uses a press-fit design, so no extra hardware is needed. Easy print. Printing Details: I printed it in ASA filament, but PLA or other…
Simple replacement slider knob for household dimmer switch. No supports necesssary
This dimmer knob I designed because my old one broke, and it looks really cool to have chosen your own color. It works for me with the Schnieder dimmer, but probably for other dimmer knobs s well.
Easy assembly with no soldering or glue USB Extention cord: http://a.co/3frbS6n USB Touch dimmer light: http://a.co/0hTUhNx Use a hobby knife to shave plastic just a bit to a perfect fit with no glue. Print lithophane at 100mm with:…
The original holder for the Philips Hue dimmer switch is not bad in and of itself, it also makes a noble impression on the wall. But if you glue the holder on a flat tabletop, for example on the bedside table, it doesn't look so nice…
I've modified the original design to easily fit both Shelly Dimmer 2 & Shelly Plus 1PM I also did not like threading the cables through the holes in the side walls, so I've modified the model to have a channel for all cables going to the…
This is a replacement dash lights dimmer knob for 1st generation Toyota Tacoma, 4Runner, T100, and many other vehicles. Specifically, this dimmer knob is adapted to a modern ¼" splined shaft potentiometer, as found in electronic dimmer…
Simple replacement knob for a rotary dimmer light switch
Dimmer spare wheel
A holder for a shelly dimmer, u can put it on a rig and it will organize all ur shelly's.
This lets you mount the Phillips hue dimmer switch on top of your existing light switch by replacing the switch cover plate. This is designed specifically for light switches that are common in the US. (Sorry, not for paddle switches). I…
Repairs Elko L3033 light button by adding additional structure inside of existing button. It will look exactly the same as original part, but will function much better and last longer. Print part from ABS or ASA because it needs to handle…
I had bought the Ikea NÄVLINGE desk light for reading in bed. The amount of light it produced is too much. To dim the light I drew a simple cap that can be places on the led light. It looks good and gives a nice dimmed light. Included are…
I guess most Hue users with a dimmer switch will have the problem, that they want to use the dimmer switch instead of their traditional light switch. To remove the traditional light switch, connect the cables and put the dimmer switch…
Simple case for Shelly Dimmer2, frictionfit, keyholes for zipties (room for 4 wires) 4 screwholes for easy mounting Designed for mounting dimmer on top of kitchen cabinets (for use with led spots) Print Settings Printer: Artillery…
This is a double LED Light Bar for Prusa MK4 with LED controller for Brightness (Dimmer) and On/Off Control. I use an external 12V power source, because of suggestions from others indicating that the xBuddy board may not like the…
We have Elko light switches (https://www.elektroimportoren.no/bryter-innfelt-endevender-plus-6-1-ph-elko/1410705/Product.html?Event=brandlist) around the whole house and I wanted to mount the Philips Hue v2 Switch on top of it. The…
This is a remix of the "Philips HUE Dimmer Switch Wall Adapter" by jiroenu. As the ELKO switch I have in my house doesn't run completely flush with the wall the original design didn't work. I still liked the design by jiroenu so I did…
I thought the original was a bit to hard to remove from the holder si I add a little notch to make it easier
i have used the original magnets from the original Philips hue dimmer frame Enjoy it and let me know waht you think about it
Took some dimensions. Designed in TinkerCad. Printed. Mounted. Finished! For nice surface you need to pay high attention. In nature my print looks better than on the photographs.
A holder for the Philips Hue dimmer into a Feller EDIZIOdue cover. The holder is split in two pieces, being the same dimension as the original Feller switches. For an assembly you need: Feller EDIZIOdue cover piece with two empty places…
A wall mount for Hue Dimmer v1. Fits original magnets which are 15x2 mm. Depending on tolerance you may need to add a bit of glue to magnets. Make sure to test which magnet orientation works best - it will be the difference between the…
Simple replacement knob for a dimmer switch. Outside diameter is 38millimeters. Inside diameter is 4 millimeters with a keyhole. I added some pattern on the outside for easy grip. Store only sells complete sets instead of just the knobs.…
This is a repair I made for my broken dimmer switch. It has a slot feature on the inside to fit on the switch itself.
This housing contains the following components needed to upgrade the Gaggia Classic/Pro. Also it will work with other machines e.g. Rancillio Silvia etc. 1. 40mm Pressure gauge 2. Pump dimmer There are three 3d parts: 1. The cylindric…
I needed a new knob because I replaced the switches in my house to white ones. There was nothing wrong with the dimmer, but it had an ivory knob. I couldn't find a replacement knob in white. My only choices were to buy a new switch with a…
Made a knob for my dimmer so may be useful for you as well. Outer diameter - 35mm. Stem diameter - 5.2mm. Printed with tree supports (needed for inner dome, just to be safe) but with NO SUPPORTS for stem. If you want to keep it simple,…
A standard dimmer knob shaped like a monstera leaf. Remixed from Sra_Aveleira on thiniverse. https://www.thingiverse.com/thing:4940518
I made this Namron Zwave Dimmer mount clip for DIN rail, since the dimmers for rail mount is rare and a lot more expensive. The clip works fine in PETG and ABS
Note that it requires some Fusion 360 knowledge of Fusion 360 to change the text to whatever you want.
I use my Philips Hue Dimmer Switch to control spotify (play/pause, volume up-down, next song) through Home Assistant. For that purpose I made a buttons cover with the right icons. Can be printed multicolor by changing filament after the…
⚠Disclaimer: A small metal plate needs to be glued in the back so the dimmer v2 holds inside the recess with its magnet. 📐 Design & Fit Precisely tailored for the Philips Hue Dimmer V2 — it fits snugly without gaps Compatible only with 80…
3D Model for the Nano Dimmer Air. Usefull incase someone wants to make enclosures or mounts for this one. Could not get a model from the supplier, so had to design one. @Loxone: pls inform me incase of any IP infringement. I will remove…
Snaps into the empty frame of an Schneider exxact. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 mm Infill: any Category: Household Supplies
Rotary knob for a light dimmer. I had to replace the dimmer in my flat. I went to the hardware store, bought one, swapped it over but the old knob didn't work. Went back to the hardware store, bought a new knob, but it didn't quite work.…
I found the lights to be too bright at times, so I decided to modify the left arm by adding a round touch dimmer to turn off and dimm the lights. To find the dimmer, simply search for "round touch dimmer 24v" on eBay.
Phillips Hue Switch Cover and adaptor for the V2 dimmer switch. Stop unwanted switching off of your smart globes with this simple push on adaptor and cover. Our place has multiple style/ages of AU switches so check my other makes for one…
Slide this cover over the Schneider Exxact housing (with the button removed). This enables easy access to toggling power if needed. Printed without supports.
Thanks to robo https://www.thingiverse.com/robo/designs i got the scad file and could remix it. Removed the rounded edges on the wall. The tolerance between plate an frame may be tight, scale the frame bigger.
The old Philips Hue dimmer switch has a design flaw causing it to break and the battery not sitting tight. This part replaces the broken thin piece of plastic that hold the battery cover tight. It's a very small part, don't use old…
Replace the the faceplate on your paddle style (ex. leviton decora) light switches with this mount for a phillips hue remote. Completely printable without supports. I printed with a 0.8mm nozzle, 3 perimeters in petg on prusa's standard…
Best to print from PETG. The magnets from the original holder can be used and glued in the back.
I wanted an inline smart switch that I could place next to my lamp so that even if it lost connection I could still easily access a realy switch to turn it on and off. I found a small Dimmer switch on aliexpress and needed a cover to…
Hi This is a simple box for a dimmer. No supports needed ! I suggest you to print with PETG V0 UL certified https://prusament.com/materials/prusament-petg-v0/ You will need : 6x M3 Inserts 6x M3 Screws 1x Dimmer…
This is a 2 gang wall switch cover. It is a mashup of https://www.thingiverse.com/thing:3118789 and https://www.thingiverse.com/thing:2925467 Included are 1 and 2 dimmer plates. The plates are glued to the tray. Category: Household
Created this (little bit overengineered) base to support his lamp with dimmer capabilities: https://www.aliexpress.us/item/3256802429767622.html?spm=a2g0o.order_list.order_list_main.65.22621802pusssc&gatewayAdapt=glo2usa
Those basic wall mounted light dimmers have a knob that one day just breaks. Here's a replacement. Print with the top surface on the buildplate. There are several other designs on Printables for you to choose from.
Taking the Phillips Hue Switch UK light switch cover on Thingverse by cgcrute as a starting point, I reimplemented a new version in FreeCAD that took in to account the dimensions of the Hue Dimmer v2 and the double switch dimensions of…
Simple housed light source utilising dimmer to accurately achieve your FLATS up to a OD OTA diameter of 186mm Keeping your exposure time to what you want you can just adjust the dimmer to suit that exposure time, as required. If you do…
My Gira switch buttons didn't fit the Walli dimmer so I created this button. Printed on glass to better mimic the shiny surface of my existing Gira buttons.
