2116 modeli
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
Please like and follow and post your makes This is a speaker redirector for the Xiegu G90. It was designed to be held in place by the G90-H1 bracket, but tape would also work. I made the redirection cone much shorter than the original…
Note - I have not printed this with the new Arachne perimeter generator. If you do come across tolerance issues print the main parts with the classic settings. This isn't quite a remix but a slight design change. I originally used Reven's…
was flabbergasted that despite the multitude of various fan ducts floating around Thingiverse, NONE of them seemed designed for the CR-10S Pro V2 and Micro Swiss. This duct is designed for: CR-10S Pro V2 BLTouch Sensor Stock fans Micro…
Designed to fit in Artic P14 or any 14 cm PC fans to directional air flow.
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
Basically took a Satsana duct for a 5015 fan, modfied it to be able to hold a BLTouch + BMG Direct drive extruder on top, aswell works with most Creality machines, I designed it for a CR10 This version is for the mellow mosquito hotend,…
Note that these parts were made for the VINCA 6" Digital Caliper, DCLA-0605 , so they likely won't fit other brands or models without modification. Step versions are included to facilitate this. These models are designed to allow calipers…
Useable right and left threaded bolt
Direct Drive Extruder Assembly for V6 Hotend and CR10S PRO Dual-Drive Extruder for Creality machines Needed: 2x Short screws M3 1x Long M3 screw 1x Slightly Longer M3 screw 1x M3 short screw/glue - attaching angled fan holder piece Parts…
A quick print, because the world is weird, and I miss David Lynch. We like these colorful ball chains for keychains - https://amzn.to/4imYtiX I like to print at .2 layer height, with the printer slowed down a lot for the text layer. Clean…
The original mount was to low (almost the same height as the nozzle when the pin is up). So I redesigned it 2mm higher. The new version has now been fixed. https://aliexpress.com/item/1005003291181349.html
UniTak3D Direct Drive Filament Runout Mount This is the 3D object that lets you mount the Filament runout sensor with the UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket . This is designed to work with the Original Creality Ender…
I made these for my wife who handed them out when she walked the Camino de Santiago in Spain.
Function The Blocks have a special pattern of tiny octagons on each side, allowing a connection between to cubes in any of the 4 usual orientations. The patters is also repeated 4 times per side to allow connecting the blocks in a shifted…
Gcodes für Ender 3 mit Direct Drive.
Directional arrows with inscription LIBRARY (left and right) - 10 cm, 20 cm (two colours)
Your phone can be mounted in front of the driver to provide driving directions. I found the iPhone maps more reliable than the cars' maps. I mounted it easily in an older Ford Explorer and in a Lexus ES350. It needs a ledge about 1 - 1-½"…
Why this model exists There are a few similar retrievers already on Printables, but this one is special in two respects: It has an embedded metallic M5 screw, so that it screws on directly on the telescopic extension rod. All movable…
This part is an offset / spacer shim designed for the Vevor JH-1B multidirectional microscope . Its purpose is to slightly shift (de-center) the microscope position , making it easier to fit into your workspace and improving comfort…
This bolt allows two different direction nuts at the same time. It makes an interesting fidget toy. Print instructions The bolt was made after seeing this video: And while it's a lot nicer in metal, the 3d printed variant still is nice to…
Print your own 3D printer filament Dry Box! Check out this video I made about it, including assembly instructions: Parts are optimized to work best with PLA filament. Easy printing, no support material needed. Snap-fit rollers, hygrometer…
This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…
After I convert my printer to direct drive my extruder cables were touching the Z rods. I don't like cable chains so I need a solution for cable management. The guide has a 90 degrees angle in order to better route the wires and it is…
*NOTICE* If your duct is not centered to the nozzle, please print the offset version of the duct that offsets the ducts 2mm to the right to try and correct for this. There does not seem to be a reliable pattern for what machines need the…
Its a model of baby yoda model from MarVin_Miniatures from Thingiverse Baby Yoda - Free Sample by MarVin_Miniatures - Thingiverse - Link
Introducing my latest 3D printing enhancement—a custom-designed direct drive mount for my 3D printer! This meticulously crafted mount seamlessly integrates into my setup, bringing unparalleled precision and efficiency to my printing…
Opening a door as a firefighter, law enforcement officer or emergency doctor can be a challenge sometimes- but KEEPING it open can be just as important. If you are tired of jamming doormats and trashcans into doorways then this print is…
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…
Kobra Max Direct Drive uses the original OEM original extruder without buying another extruder allowing you to upgrade to direct drive. Plus, a cut for the cable does not get in the way of direct drive. You may need to get this cable if…
The OOTBDD (Out Of The Box Direct Drive) was designed to be printed with the sample filament that comes with the stock Voxelab Aquila machines. No extra hardware or tools are required. GCode File (had to zip it for Printables to let me…
this is a custom spool holder i designed for my printer after i converted it to direct drive. the spool cylinder is made to fit most 1kg filaments and can be on either side of the main body. Print instructions can be printed at high layer…
ISO 7010 - Safe condition Signs (Emergency Exit with Directions) In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. I have uploaded profiles for AMS and without AMS, the profiles without AMS have…
This is a complete redesign of the Drivinator for my ender 3 v2. This fits a BMG extruder. The purpose of the slots holding the motor is to make maintaining the hotend easier. The idea is that you don't use a coupler on the BMG. Instead…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hey fellow Ender 3 v2 Neo user ! I've been looking for a working cable chain setup for my E3v2Neo that also allows for the Direct Drive…
Einfache Umlenkrolle, für schwerere Lasten anstatt den Bolzen eine M12 Schraube verwenden Simple redirect pulley, for heavier loads use an M12 screw instead of the bolt.
Bambu Lab A1 Mini Poop Guide directs the filament waste downward after ejection. Does not accumulate weight because it only deflects the waste downward. If you would like to buy me a cup of coffee .
This case can house a Raspberry Pi 4 together with an buck converter (stepdown). That way you can easily connect the Pi to your 3D Printers PSU or any other device that supplies between 5V-40V. I designed 2 versions of the case, one that…
If you Upgraded your Ender 3 Pro to Direct Drive you may want to attach a Filament Guide to your printer. Here's a simple solution. Note: The Hole where the FIlament goes through fits a Ø4mm PTFE Tube. Just put the Tube inside and cut it…
Es können der original Extruder und der Schrittmotor weiter verwendet werden. Die 8mm Hülsen müssen ins Druckteil eingepasst werden und zwischen Hülsen und Rolle habe ich eine M5 U-Scheibe eingesetzt.
General: Please take a look at model/228663 for a detailed explanation of what this is and what’s it for. This versions are probably not as tough as the versions with hex-nuts, but usable. Preparation: As my printer produces slightly…
I found making the nuts into hex-nuts makes the spin effect more satisfying. Please check out Gijs' original design and show some support. The included .gcode was generated for the Mk3S, the nuts use more filament to give them some…
Edit 7.2.2022: new revision of the duct. Just small modification of the shape of body for easier print without supports. Brim is not necessary. I also added cut-of pictures for imagination of the assembly - screws/nuts and so on. Edit:…
Extruder assembly for Ender 3 Pro with cable guides and holes for zip ties. I printed in PETG for more strength. I added the STEP and Fusion files to make it easier to remix. There are no lettering on the model, my name is not that…
Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…
Anti z-wobble squares Metal Pins Here you can find updated version of anti z-wobble. (probably last version :) and only for direct drive) This design uses 32 additional metal pins (fi 2mm, length 8mm) on which steel balls are placed.…
Door Catch Direct Version This is another version of my Door Catch, which I recently published here: https://www.printables.com/model/1321706-door-catch A simple and efficient door catch designed for easy installation and use. It consists…
A design by EGoe from Thingiverse for a J1772 Tesla Adaptor Lock, with some considerate modifications: Bi-directional There is a small press-fit that helps keep the ring attached to the adaptor while you carry it around. There are two…
Miniature director's chair. Printable without supports and in two colors by simply changing the filament (in height) in the 2 fabric areas. The original size is: 73mm (height) x 47mm (width) x 35mm (depth). You can use supports or accept…
I upgraded to an android Navigation Radio system for my Fiat 500e. Since the vents have to be removed, the air would blow freely into the dash board, These vent redirect models make sure the air goes to the small vent included on the nav…
This is a model of the MicroSwiss DirectDrive and AllMetalHotend for the Creality Ender 5 printer and was created by manually measuring some parts from my CR10/Ender 3 MicroSwiss DirectDrive, except for the backplate that I uploaded here…
This is a remix of the CR-10/Ender 3 Direct Drivinator by Madau3D. I've changed the relevant dimensions and added cutouts so it fits the Elegoo Neptune 2, which has a slightly different X axis to the Ender 3. The Neptune 2 also has a…
parts required 2x 3/16" washer (Ø14mm and 1.2mm height) 1x M3 14mm socket head screw (leftover from the Prusa MK3S kit). Slightly longer or shorter is okay. 1x spring from unused pen optional 1x M3 washer I was inspire by FreddyZ and…
So, after many iterations and some bad behavior from my printers, I'm finally releasing this mod, or should i say costume? Basically, this is a custom front plate for my direct drive mod. As a Voron owner and a big fan of Voron printers…
UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…
This model is a bidirectional cable chain based upon the igus Triflex series energy chain. These are used to wire up rotational systems where the cable cannot be routed through the center of the axis of rotation. An example use case would…
DD-SM Mount I created this mount to have the motor and extruder as close as possible to the X gantry bracket to not have the weight of the motor hanging a long way away from the metal bracket. This mount is very rigid, there is no droop…
In this video I will walk you through the installation of a Bondtech LGX Lite Extruder onto a Creality CR-10 Smart (should also work for CR6-SE? someone please confirm in the comments section!) to convert this printer to direct drive.…
I modeled this Bondtech BMG Direct Drive Extruder mount for the Ender 3 pro because of finding other models that caused hole misalignments to the original aluminum mount. Layer Height: 0.16mm Infill: 25-50% Supports: Yes (Tree Supports)…
This is a design of direct extruder with bmg + V6 / V6 Volcano for Ender 3, Ender 5, Ender 5 Plus and CR10. Attached you can find the assembly instructions, material list and all stl files you need to make it. Buy through the links or…
Dies ist eine Halterung zum umbau des Anycubic Kobra Go auf einen Direct Extruder, Bei Fragen zum zusammenbau oder anderem schreibts in die Kommentare Viel Spaß
Here's a simple, two piece model to update your Ender style hotend mount to direct drive. It looks great and lines up really well. Kind of a bear to install, but I was able to do it without taking anything off other than the bolts holding…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
I modified the arm for the BL Touch to match up with the cable for a CR Touch and removed the access hole for changing the BL Touch probe since the CR Touch does not have a replaceable probe. I am using this on an Ender 3 v2. I suggest…
Wanted to use an old DirecTV bracket for my Starlink v2 dishy. Designed this to fit into the pipe and secured it with some screws. You can use screws or glue should work too. Printed in PETG
In this video we are going to breathe some fire into "Project Dragon Rising" - The Creality Ender 7 printer that I have been modifying. The Bondtech LGX lite extruder combined with Slice Engineering's Mosquito Magnum hot end should bring…
This is a spool holder/filament guide combo print. This uses the stock ender 3/ender 3 pro spool holder bracket and is meant to turn the spool so that it goes straight down into a direct drive hot end. Additional Hardware: 1 x m5 nut…
Printed using settings: Vertical Shells Perimeter: 3 Infill: Gyroid 40% Support: No need for support
The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…
A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…
I wanted to use the excellent bullseye fan duct on my Ender 3 but I've changed mine to direct drive with the genuine Creality kit. Anyone who's tried this will find the feed motor is in the way for the cooling fan. I have remixed the…
Direct drive sherpa extruder conversion prusa mini for printing TPU filament dual drive super light weight about 117grams Printing 0.4nozzle TPU85A 50mm/s @0.23layer with ease Installation Instruction:…
You can find pre-soldered hardware + fan kits here: https://exen.sh/products/diy-kit-direct-mount-cooler
Last updated: July 31, 2021 (see Change log section near the bottom of this post) A compact and easy to print direct drive mount for BMG extruders, V6 hotends, and ABL setups. This is compatible with open carriage printers such as an…
Once I printed XTRUD3D 's chain for the Flashforge Adventurer M5 I realized that the filament sensor could not work in the correct way. So I created this additional holder for the filament sensor. Placed vertically, the sensor maintains…
Two versions : Redirects CFS purge (“poop”) to the front of the K2 PRO for easy clean-up. Tight mechanical slack by design; a light sandpaper pass may be needed. Default right-side install; mirror in slicer for left. Thermal & airflow…
Original makers of remixed models: Unfortunately the makers of the models i remixed are not on this website but they are on thingiverse which is where i got the models from, check them out. eric-anastas made the satsana ender 3 fan shroud…
Blog: https://dev.joesturge.com/p/3d-print-in-place-a-design-journey/ OnShape Files: https://cad.onshape.com/documents/5b146e263caac3060752204d/w/15bde26dc6901519c376ed2c/e/cecbda455fb1c20a8470df09 Features Fully print-in-place – no…
simply adding ready to print stls instead of obj that had issues with orca
Wind indicator, without additional bearings. Printed from PLA. After printing the bearings gently hold and move them, then add some oil. The blades for the windmill should be printed with supports. Bearings should be printed at a height…
This is a direct driver filament adapter that I created for my Ender 3. I reused pretty much all my stock parts, except I needed to replace 2 of the stepper mount screws with M3-20 to account for the new mount depth. Everything fits…
3D Touch BLTouch Mount Kingroon KP3S 3.0 Direct Drive FreeCAD Source Files Included I tired this mount by benjibigbro, but it was too low [ https://www.thingiverse.com/thing:4816601 ] Thank you benjibigbro for your awesome design. I…
I was looking for an adapter that rotates the spool holder 90 degrees for DD extruder but I could not find any. All others models were for Ender 3 V2 which has a V-slot in front of the top extrusion which Neo does not have. This one uses…
Ender 3 Direct Drive Spool Holder Adapter The adapter does not require additional screws. The upper aluminum(?) profile must be unscrewed before inserting the adapter. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
This is a 20×20×20 mm calibration cube with feelings. Rotate the cube left, right, up, or down — and every time it still says “I ❤ U”. No matter how you turn it, the message stays the same. Unlike most things in life. Designed to: Check…
My wife wanted a pumpkin clicky fidget for her elementary school class. I have a box of knockoff blue cherry mx key switches, and found the model that she saw online. Unfortunately, the included key cap wouldn't work with these off-brand…
This is a omni directional wind turbine designed to be installed outdoors on the rails of your deck or just stick it in a potted plant. This design will catch wind from all directions and the turbine does not have to face the wind. I have…
UPDATE: I have now uploaded a 1 piece model (combined) as well, which is 230x75.6 so it can be printed on Prusa MK3/MK4. A 1 piece or 2 piece mount for VRS DFP controller box. I have printed the 2 piece edition with PETG on Prusa Mini and…
Incorporated the dice tower mixed directly into the hexagonal section. This does mean that one of the die can “escape” into the tower door, but I don't mind that so much. Otherwise, this is the same model, dimensions, and setup as the…
The version included in Hero Me put the fan duct nozzle too far forward and didn't tuck in tight to the hot end.
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…
This modification is intended to carry over as much as possible from the stock Anycubic printer (Vyper Rev. C, Kobra Plus and Kobra Max), but to get an direct drive extruder and better part cooling. My target was to be very compact with…
This is an adapter that will change the Ender 5 Pro to a direct drive using only stock parts. It includes a way to manage your cables and to rout your filament to avoid tensions. If you have elephant foots this parts may not fit into each…
A direct drive mount for Ender 3 V2 with adjustable X and Y axis. Made it adjustable for my dual gear extruder and possibly for other upgrades. Important note: make sure that X end stop is triggered, if not, add some spacer or bend the…
No need for more screws or PTFE tube adapters needed.
This has direction indicators for if the direction changes so you don't forget. The small arrow goes on the side with the lip. Make sure the arrows are facing opposite directions. The reason for the larger arrow is so that gravity keeps…
