Omnifixo M4.4 Insert/Dividers
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
- Pobrania
- 553
- Polubienia
- 144
- Ocena
- 4,94
680 modeli
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
This is a set of modular dividers to suit the Tool Box Parametric Mini . The dividers created by Ross King for the full sized tool box were the inspiration for this, but rather than a remix, these have been created from scratch to suit…
A parametric MTG card divider with mana symbols. Included STL files have all 32 mana combinations (in the correct official color order) and are ready to print. No supports required, I also printed without build plate adhesion layer. Uses…
Simple modification of Zack Freedman's 1x1 gridfinity bins that adds internal dividers (half-split and quad-split options), deepens the internal volume, and removes the magnet feet holes from the bottom. I think I also used @Akio's…
These are card dividers for my insert/organizer for the board game The Lord of the Rings: Journeys in Middle-Earth. These dividers are in German.
This will let you use the mini-bins from @RobertONeill_540978, while still organizing the space underneath. These should fit snuggly into the bins from Dewalt's Toughsystem organizers. There is a separate model if you want to split the…
Dividers for the IKEA VARIERA Cutlery Organizer to divide the existing compartments into smaller ones for better space utilization. Gluing the dividers in place with super glue seems to work perfectly fine (at least so far). I had to use…
Large and small drawer dividers for 30- and 39-drawer cabinets. Fits these cabinet models: Craftsman CMST40730 and CMST40739 ArtBin 6830PC and 6839PC Stanley Tools STST40730 and STST40739 Black+Decker BDST40730FF and BDST40739FF FILES…
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
My Son-in-law was complaining about storing his fishing gear in these containers and how the dividers always pop out and allow the gear to roll around in the box. While the containers themselves are fine, the dividers are rather flimsy…
Designed to be printed in vase mode (no top layer, 0% infill) and accept labels*. Labels are 15mm x 7.75mm
A modular drawer divider system that joins the esthetics of 3D printing and woodworking. 3D-Printed parts All printed parts can be customized to meet your dimensions with the parametric ModularDrawerDivider.f3d file in Fusion360.…
Dividers for stock factory Milwaukee Packout Deep Bins; divides bins into halves or quarters.
NOTE: If you need even more organization, you can print the “ Any Size Hanging Trays for "Modular Drawer Dividers" (Parametric ) ” to provide even more space for your stuff! These trays work great for utilizing the unused vertical space!…
I found this helped keep my Skadis Containers slightly more organised and stopped tall items falling out
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
Please checkout my other free designs at https://makerworld.com/en/@Westly Description Attached you will find several card storage dividers that fit standard BCW long boxes, Multi row boxes, and MTG Fat Packs / Pokemon Elite Trainer…
The original model from @sraj had these both sizes of boxes, but the biggest one was presented only with internal dividers. I needed it without the divider, so I needed to remix it for myself. Boxes are simple, versatile and perfectly…
It holds 120+ standard-sized double-sleeved trading cards (i.e. Magic the Gathering or Pokemon) and includes dividers and an optional TPU seal. I seized the box based on Dragon Shield sleeves. No support or brimm required. Requires 6…
Highly customizable drawer dividers, works not only for IKEA Alex Drawer Units created by Ralf Meier
Description: Basic labeled dividers for organizing records, or other things. I included two sets of dividers, one contains a notch (works great on the IKEA Kallax shelves) to keep the dividers from sliding in too far. The other set does…
UPDATE (Mar 3, 2025): Added a divider for the long bin of the Milwaukee Packout Low-Profile Organizer I wasn't satisfied with the existing models that I've tried for the Milwaukee Packout Low-Profile Organizer : some were too thick; some…
I only use this for the top drawer of my ALEX Drawer Unit, where I have all the tools I regularly use. It is much more fun when you always have all the tools at hand and do not have to constantly rummage for them. You can scale the rails…
Update released! Includes Maxi box (⅔ of the Trofast drawer). Set of drawer divider/inserts for IKEA Trofast - you can mix and match them however you want. Originally designed for LEGO (and hence big fillets at the bottom making it easy…
Help keep your Pokemon TCG cards organized, especially when it comes to your energy cards and/or bulk! These multi-color print dividers are the general size of a Pokemon card with a tab to help make it easy to see and get to the different…
These bin inserts are for the Akro-Mils small parts organizer to allow storage of a larger variety of small parts without worrying about them working their way under the dividers included with the storage system. Step files included for…
What even is this? If you're interested in a sturdier card box that uses more filament, check out Dre Wizards Stackable Trading Card Drawer . I designed this one from scratch with their design in mind (same internal drawer dimensions).…
This is a kit of brackets for making your own drawer organisers, suitable for organising drawers in the kitchen, office or workshop. The brackets are designed to be used with 3.5 mm plywood or 1/4" (6.35 mm) plywood. The height of the…
Additional insert options and reduce wall thickness to cut print material/time by over 50%. Remixed from benjamenjohnson design, https://www.thingiverse.com/thing:3371609 , Naming scheme: # upper/lower (deep/shallow)_alt "#" - Number of…
Spare parts and complementary accessories for your Milwaukee Packout storage boxes and organizers! Accurate fit, extremely stable (more stable than the original) and suitable for all variants. With the dividers you can divide your boxes…
A sturdy, modular set of kitchen storage boxes / organizers designed for organizing packets and sachets such as baking powder, yeast, spices, and seasoning mixes. The boxes are available in widths from 70 mm to 130 mm and feature…
Milwaukee Packout Toolbox tray bins to help organize your toolbox trays. Bins are a very snug fit, you could just use a single bin, or an entire side. Several different combinations, including short and tall heights. The 87mm Bins make…
125mm & 150 mm sandpaper holder with floating dividers for easier organisation in the workshop. The Cradle is not my design I have remixed it a bit for my needs. I added the dividers since the use for me depens on the type of job I do. So…
UPDATE: All new files plus 62 more sizes are now posted on MakerWorld.com . Join me over there and leave a 'Boost' if you find these helpful! Unable to print? Visit my Etsy or eBay links to purchase the prints instead! — — — — — — — — — —…
I was looking for a card separator for the Pokemon TCG to divide the different types of cards but only found stuff related to Magic the Gathering. So here's my rough take. The separators are just high enough to see the top of it over the…
Added parametric values to make the number of dividers fully customizable. Added optional filled inner lid to keep items from jumping bins Smoothed out top latch so it does not need supports added Added extra material to latch for strength
Dividers numbered 1-8 staggered so you can easily sort through. DIviders 1-4 you put in the top and middle clip while 5-8 you put in the bottom and middle clip. Each divider uses 7g of filament each.
Years ago, I finished building the cabinets to store my hardware collection, but never got around organizing the contents. Now, I’ve finally transformed those chaotic parts drawers into a well-organized hardware stash. Starting with my…
EDIT: Here are the Half-Height Bins . EDIT2: It took a lot longer than I anticipated, but. . . Here are the full height divided bins. Since I have already duplicated the: Milwaukee Packout Low Profile Organizer bins and the Packout…
Trays, dividers and labels to fit the Ridgid Pro Gear 2.0 Drawer toolbox. Should also fit Keter, Magnusson and other rebrands. You'll probably need to print the divider on the diagonal, and the trays standing up at 45 degrees with some…
This is a remix of @Argo's storage boxes for the Honeycomb Storage Wall . I added dividers and made the walls a little thicker, from 1.2mm to 2mm. Huge thanks to Argo for providing .step files!
My wife wanted some hanger dividers for our daughter's closet, so here they are :-) There are 4 with text and one blank stl. If you want to make ones with different text, I've also included a link to a model on tinkercad with two text…
I was tired of of my work bench drawer always being disorganized, especially when opening / closing the drawes. Even drawer trays didnt help, they just moved and spilled. These pieces are designed to to work with thin strips of MDF /…
Ikea Helmer drawer dividers perfect for vase mode. Save your filament for more visible print. These drawer organizers can be printed in vase mode and will fit perfectly. I've printed them 0.3mm If you don't use the vase mode you might…
Need a way to keep pens, pencils, small screwdrivers, and other things from getting unruly? This is the solution you've been waiting for! Available in 6 and 9 pocket configurations. Suggest printing in PETG because garages can get hot.…
Fully Customizable 3D-Printable Storage Box This modular storage box offers customizable compartments, perfect for organizing tools, accessories, or office supplies. Predefined STL files are included in various sizes (50x50, 50x100,…
These parametric models support toggling of label shelves, magnet pockets, Refined mounting screw. This is all in the Gridfinity Refined model standard base format. There are two types of this model, the “Standard Labels” has a label…
Keep the contents of your 3-ring binder organized with this nice set of tabbed dividers. The tabs are large enough for labeling post-print, or 3D print text right on them in your slicer. The models are designed with a thickness of .6 mm,…
A custom stackable solution to store many small parts in a Harbor Freight Storehouse 20-Bin Medium Portable Parts Storage Case. There are two trays that stack together. I designed these specifically to fit in the upper left-hand corner of…
The dividers are designed to be used together with the Sorting Tray with Funnel . When the sorting trays are used, the dividers make it significantly easier to keep sorted parts separated and return them with the funnel. See Sorting Tray…
For those of you who want to keep your eggs extra organized, here is remix of njeff's bird nest egg holder for the board game Wingspan. I added a tripartite internal divider, and also created a snap-on top that keeps the eggs in place…
This is a variation of my design, https://www.prusaprinters.org/prints/123420-festool-systainer-mini-insert , but with larger boxes. These are interchangeable. This should be a press fit. Shell is minimum 1,2mm thick Part number is…
Fully parametric bin with labels, and sub compartments. Fusion 360 files allow parametric sizes with and without the lip. Lip size and offset also configurable. Dividers for sub compartments in both axis Fingerscoops selectable V1.5:…
This is a fully parametric divider box for Amazing Gridfinity system by Void Star labs. I know there are a bunch of other ones out there but this one is mine =) (plus there wasn't one with bridged magnet holes) Parametric Options: Width…
Bin inserts for Milwaukee Packout system I designed these bin inserts to make better use of the Milwaukee Packout system. Each insert fits snugly into the bins but still leaves just enough clearance for smooth, one-handed use—super handy…
These are for the Stanley 014725R 25 compartment organizer. RELATED THINGS: Stanley 014725R organizer - large 3 compartment bin with lids plus 4 bins https://www.prusaprinters.org/prints/79588 Stanley 014725R organizer - medium 3…
simple remix for less material (remix from notch version)
Designed as an organizer for a collection of too many pens and markers, but maybe useful for other non-pen related tasks. There are two tiers with an elevated second section to ensure all pens are at a similar level. The upper level is…
UPDATE: for some reason the 3 slot mid-rear size was incorrect, has been fix and update in download this is a great way to put all your nuts and bolt in one place along with spare parts, this is great for any brand printer.. one of the…
Simple dividers with tabs equally spaced along one edge for labels, so you can see where one collection starts and another ends. All my comic books are on shelves, so you can't see the covers, and other dividers I've seen have the labels…
Stanley FatMax FMST1-75779 Shallow Organizer Dividers for the large and small bins I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Included is the f3d file A lid exists, to prevent small washers to move to another bin.…
Alphabetical A to Z dividers. Plastic shelf ogranisers for LPs albums 12' record collection. The alphabet is created in 100% size and can be reduced (enlarged) at will letter A is ready for 100% size, 75% size and 50% size... For all…
Two different dividers for the small drawers of this STANLEY organzier: https://www.stanleyworks.de/produkt/1-93-980/kleinteilemagazin-mit-30-schubladen (model 1-93-980), also sometimes branded as CRAFTSMAN . These lock in place (you can…
A set of card dividers, to make the large deck of cards that comes with Lord of the Rings: Journeys in Middle Earth more manageable. Sized for sleeved cards. Ideally used with a card organizer such as @merkli's fantastic…
Size dividers for clothes rack, available in sizes XS => 2XL and also 34 => 48. Optimized to print 4 of them on a 235mm bed (Ender3 bed size). If you need any other sizes/labels, don't hesitate to ask. I'll see if I can add them quickly…
Here are the half height bins I wrote about in my full height bins post . Since I have already duplicated the: Milwaukee Packout Low Profile Organizer bins and the Packout Organizer Square bin and the Packout Organizer Rectangular bin . I…
This vertical divider system for your Milwaukee Packout organizer allows you to chose how you want to organize. The three slots allow easy addition or removal of dividers.
A remix on the amazing FilmPod 35mm with added dividers - Requires 4 magnets 6x3mm I loved the design of the FilmPod 35mm that Downloaded Goods made but wanted to add some dividers to hold the canister in place.
Extra dividers for Jewelry Box, you can print one and make it right side or left side by flipping divider as shown in picture. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 0 % Filament: 3D…
This is a set of index card dividers for the standard 3x5, 4x6 & 5x8" sizes. The tab sticks out 10mm from the top. There is a version for ⅓ width tabs and ½ width tabs. Note: The file for blank cards with left or right tabs are the same…
I like these crates but wanted a little more organization in the things I heap into them! There are a few variations available as well as an .stl file of the divider shape itself so you can locate it where you want in the 3d design…
No supports required, lid and box print separately and lid snaps onto the box. Magnetic closure, if desired. With the included F360 file, you can adjust all parameters including length, width, magnet size, lid height, box height, hinge…
In case you print several of these filament swatches , you might need a solution to remember which spools are empty or bad. New: There are two versions available now, V2 and V5: V5: The white dividers in the pictures above. Text rises up,…
I scale the dividers up a bit if you want to add labels to them and have them peek up above the cards. I found 73mm tall works well to still have the box close flush. The trays are tweaked a bit but inspired by a design from Thingiverse…
I started with ThinBegin's excellent 110 film holder and tweaked it just a tiny bit so that it'd fit the “B” frame in the Epson V600 perfectly. That model is still available in case someone thinks that it'd fit their use case better. In…
I need a divider for the Sortimo 1x1 bins as I had a lot of small items that needed less space then the orginal bins provided. Turns out that a vertical divider wouldn't work due to the design of the lid so I came up with these removable…
Dividers for the Tool Box Parametric you will need to print 4 x corners, 2 x middle back and front and 1 x middle tray
The IKEA Skadis system is quite handy for parts/tools, however the clear containers (Article #803.359.09) are oddly sized for most items associated with 3D printing. I designed bins that can be used to split the container into two…
The are based of the current sidio crate dividers for both half and full size crates 9/2/25, Tweaked ears on Fullsize split and also connector( allows for slight angle and also 2 piece for faster printing 12/18/24 Added new version for…
Made my own DIY trekpak dividers using this guide: https://www.arielestulin.com/diy-trekpak-for-under-20/ The bobbypins used ended up getting lost all the time, and didnt give me enough stability. Made for 4mm coroplast, and designed for…
I have remixed the given 3D-models for separator wall size 4mm because the wall size of the original dividers (7mm) was much too thick for my use case. By reducing the wall thickness, a lot of time and material can be saved. The length of…
Please like and download. Make sure to take a pic of your print. You will need screws to put the box together. You can find them here. The first one has a round head. Allen hex socket button head screw This next one doesnt have a head at…
Simple dividers that slot on to the shelves to keep items separated, and to stop things falling over when you open and close the fridge door. Available in two different sizes, depending on the height of the drawer - 52mm high and 30mm…
Trunk divider for later model Ridgelines, These are rather large prints, so a large format printer may be necessary. STEP files included so you can mod to your liking. I've been running these for about a year now, and they have held up…
Print 2x 6 row divider (vertical part) and 5x 3 row divider (horizontal part)
BEFORE PRINTING (after saving this remix :) ) not every spool has the holes aligned so check it and then do it. You'll be ok drilling a hole but I hate preprocessing or postprocessing so you're warned :) Added dividers to the original…
Remixed from https://www.printables.com/model/219845-customizable-drawer-dividers Added an Extender-Joint to be able to do longer rails, roughly modified a T-Joint to make this one. Used the following Customizer to be able to generate…
Simple but effective dividers for lorcana with the ink symbols on them. They are a nice thickness which makes them very sturdy. I printed them in PLA matching the ink symbols. Works with sleeved and unsleeved cards. I designed them to use…
You need a drawer divider for the cutlery tray in the kitchen? Or an organizing system for the desk drawer or the craft cupboard? Try this modular openSCAD design. Here is my first use case: My son works as a bartender in a hotel and…
These are divider tokens for separating categories of Baddie chips in their storage containers for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each chip has the Baddie Type icon and point count…
Simple remix. I thinned them out and added a bit to the notch. I needed to extend the tab because I also use the following spacers in my Kallax: https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protective-film The…
Dividers for Wizards of the Coast | Magic: The Gathering with mana symbols in full cutout. 68 x 99 mm size. 1 mm thickness
All dividers where printed in .25 nozel on Prusa MK3S+ with color change for the icon. I put a brim as well to help from warping. No supports needed If you would like to buy me a coffee. You can through here: paypal.me/JakePens71 - Thanks!
French Cleat Sandpaper Storage for 5inch random orbit sanders with dividers and positioner for quickly mounting sandpaper onto the sander base. F3D file is included and fully parametric. 3/4inch french cleat attaches to the main body with…
Simple drawer dividers made with 3d-printed clips and white marker MDF boards. With 3 different shaped clips and variable length boards you can customize any drawer division in infinite ways. It’s cheap, easy, very flexible, and…
Closet dividers for clothes hangers that attaches to rod.
Highly customizable drawer dividers. Check original model to download joints at https://www.printables.com/model/219845-customizable-drawer-dividers This set includes rails with sizes 50-320 mm with hex transparent pattern. You can also…
I created some dividers to fit the Craftsman TradeStack drawers. The middle divider for the drawer is 260mm long and the two outer dividers are 250mm long. I printed in red Hatchbox PLA as a test but they don’t holdup in the heat.…
Dividers for the game Agemonia. These fit inside the included boxes, separating all scenarios. I also include dividers for world, city events, locked and unlocked, as well as reference cards and others. These were printed on a Prusa XL…
Dividers for the 2023 Chevrolet Colorado's Stowflex Tailgate. The dealer charges $90 for this accessory, so I made it myself. This is not perfect, but it fits well enough to work and allows me to keep things from moving around too much in…