1006 modeli
This is a puzle ball for our dog. The basic one was a little too smooth on a hard floor, so I made a version with some ridges.
Wydruk około 7,67 €–9,37 € nettoWstępna wycena jednego wariantu
Quick and easy to print, minimal infill required - just ensure you have some supports on the rear hooks (in PrusaSlicer, supports everywhere and snug supports will get great results) and the whole thing should print just fine (just be…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
This is a remix which was made to include the ribbon cable for the Pi's camera while leaving the raspberry pi zero (2)'s heatsink facing outwards . To accomodate the flipped pi you will need to disassemble the back of the einsy cage and…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
"A large blade bestowed to the heavily armored front line defenders. Without the need for a shield, their free hand helped to wield this beast of a sword." Modeled in blender
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
A heatset insert press made from some extra parts I had laying around. Uses 4 smooth 8mm rods, 6 Lmuu8 bearings(can get away with 4 or 5 though), 12 m2 screws(8 that are 6mm long, 4 that are 10mm long, though can be longer), it also uses…
Wydruk około 5,57 €–6,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remixed Raspberry Pi 4 mount made to fit the Passive Aluminium Case Mount for Original Prusa Enclosure. I have designed the raspberry pi can be removed from the top with ease. Also I have added windows to vent out the heatsink…
Wydruk około 4,20 €–5,13 € nettoWstępna wycena jednego wariantu
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Full build info and parts list A base and carriage for guiding a soldering iron during heat setting. The base holds the linear rods in split clamps (so I'd recommend printing it from PETG.) The carriage has a mount for attaching a linear…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my interpretation of a two-handed sword from the late Middle Ages
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mini that I made for an upcoming D&D campaign. There are pictures of one painted and a non-painted bigger model.
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This is a stabilizing strut, for attaching the Vélo Orange™ Constructeur Rack on the rear of a bicycle at the seatstay-arm bosses. It is sized for a medium-size Vélo Orange™ Pass Hunter frame (2nd generation, circa 2020). Mounting Two…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The AT2 10Gbit Network Card gets very hot under load - I messured over 60°C. So I designed a heat shroud which uses a 60mm Fan to direct the air over the cooler.
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very easy print with 2 options to print (* see also update) : Print-in-place version with the ball. Shake the ball loose after printing (or pause just before printing from the bottom of the treat compartment and break it loose). Version…
UPDATE: GreatScott!, a large electronics YT channel, has made an FPV build guide using this frame! Check it out here: UPDATE: I have added camera mount 30mm and rear mount 30mm, as requested by a user UPDATE: I have added STEP files and a…
Thank you for downloads, likes… Enjoy !
This is an improved version of the print-in-place dispenser for lickable treats for cats. It reduces the messines of using such treats and allows to retrieve every last drop from the tube. The model was tested by printing in PETG using…
HeatSync - The Ultimate Heat Insert Press “This has been a long time coming and now it's finally here, the upgraded version of HeatSync! I make these models in my free time so if you would like to support me, follow Thinkable on Patreon…
These boxes are pretty heavy and would recommend these be printed in PETG at a minimum with 6 walls and 25% infill. Would also recommend ¾" lumber using #10 1-½" wood screws.
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. I was looking for something to meet the following requirements,…
Note: I did not make this model. Just reposting it from here . All credit goes to 123one . Use this 3D Printed Cleat set to attach plywood (or almost anything) to the top of a Festool / Tanos T-Loc Systainer creating a mobile work…
Two-part print. Use glue and filament as connecting plugs when piecing together both parts. Update # april 24: Reduce the height from 110 mm to 100 mm in order to get better clearance due to carpet thickness variations. Slim Version is…
This model is compatible with the lego system.
The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…
Print for decoration or to practice tying knots. Please use common sense and your best judgment if you want to use this with actual boats it might hold a kayak or a rowboat but probably not a big motor boat or sailboat. And many filaments…
This is a type of bench/seats found on austrian trainstation platforms. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.1mm Notes: I disabled support roofs in Cura due to the added…
This is a hotend mount for the TZ v2 hotend for Voron Stealth Burner. Based on the Bambu style hotend. Care was taken to ensure good airflow for the heatsink and to direct the exhaust air upward to avoid spillover that can lead to ABS…
The Moonlight Greatsword from Dark Souls 1 as a Dummy 13 weapon. Printable without AMS. This sword, one of the rare dragon weapons, came from the tail of Seath the Scaleless, the pale white dragon who betrayed his own. “Seath is the…
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
UPDATE 02 April 2023 I have added the STEP and f3d files of those who want to edit the design. This is the fan bracket that is slotted over the heatsink of the X1. I designed this as those I saw were restrictive ducts that create back…
An extension for the Oculus Quest 2 Controller, so the grip should be better. With my filament and print settings the grips fit perfect. I hope its also good for you. *Update: I fixed the scale of the left part*
I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.
The Greatsword of Radahn aka the Starscourge Greatsword, scaled to be a Dummy 13 weapon. Curved greatswords of black steel wielded by General Radahn. A pair of weapons decorated with a lion mane motif. Radahn earned considerable renown as…
Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…
My beta testers really liked the toy, but the grid didn't have a chance. Next step: Glue it to the stand. Printable without supports. The tube is open on one side so you can easily put in the treats. The other side is closed for better…
Challenge your cat with a fun onigiri rice ball-style toy. Perfect for randomly dispensing cat treats. Printed in two parts without supports, the bottom easily twists onto the main body with ~0.2mm wiggle room. Simply twist off the bottom…
Festool systainer cleats for old style systainers. Should be compatible with Hitachi and Makita systainers as well, but have only tested on Hitachi. Can be used to attach a custom MFT style board to top case. Beware the existing classical…
Remix of Marius' awesome slim case for the PiZero2W, with a cut-out of the heatsink that some are delivered with.
The Fraks Flexarm is a tool-balancing arm designed to keep the attached tool parallel throughout its movement. It was created to hold soldering irons to install heat set inserts into 3D printed parts. It has a large working area for its…
I was looking through dummy 13 items (again) and eventually noticed that there were no greatswords for the fellow, sooo I wanted to change that fact! Quickly, and possibly lazily made in TinkerCAD.
This model is compatible with the lego system.
SPD cleat cover protects the spd cleat and protects the floor you are walking on. It fits all Shimano compatible two-bolt spd cleats (sh-51, sh-56, etc) Walking is much more comfortable with them. The cleat does not crackle on the…
Install a REVO on your SV08! Please note: You can purchase one ready-made here if you don't have the ability to machine aluminum locally. I earn a small commission if you do:…
will need aprox 76 inches of half inch rod. split for printing. blade is swappable with my guts raider sword model. Category: Props
ROCKET LEAGUE soccer/heatseacer ball is out now
no supports needed, print it standing up or orizontal, you will need an M3 drill bit to drill 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille if you print the one with brass inserts…
The inside is channel is chamfered so it can be printed without supports. I printed mine at 0.1mm and it fits perfectly. A bit tighter than the official knobs. If you need to adjust the tolerance for the potentiometer you can download the…
Very small bed leveling knob that uses heatset inserts. They were modeled originally for the ROOK 3D printer, but I thought I would share them since I think they work nicely. Very fast print as well.
All parts come oriented for optimal detail. If better stability is wanted, I recommend orienting blade5 and 6 on their largest flat faces. All parts benefit from printing with a brim for increased stability. This model is designed to be…
This is a Stand for the Arturia Beatstep Pro. You can use it in two ways
🧩 Gridfinity DDR RAM Stick Holder — 10 Slot, Stackable This is a compact, workshop-grade Gridfinity module designed to store 10 desktop RAM sticks securely and visibly. Perfect for: PC builders Repair shops Hardware flippers Tech…
This umbrella hook can hold up to two umbrellas on the back of your backseats in the car's trunk. Just make sure there are those tether points in your car (see photos), I think they are standardized - at least in Germany / Europe. Just…
This is a custom mount that fits right onto the CB1 heatsink to mount a fan to it. The 4x holes for the fan needs to be taped (m3) theirs no room for brass inserts. Hardware needed 1X 3010m Fan 4x m3 x 14mm fan screws 4x m2.5 x 18mm…
Update 2022-07-19: There's now a generic version of the vent adapter which attaches using zip ties, and two different nozzles (45 degrees and 60 degrees). This is an adapter system that clips on to the rear centre console vent and…
Yeah. Kind of getting out of hand now.
This is a mounting solution for an aftermarket SSR module with tall heatsink for the Qidi Plus4. This mounts in place of the factory SSR PCB using the three mounting holes. You also have the option of mounting a 40x40x10 cooling fan onto…
So, I wanted to put rolly wheels upon my Makita Cases, and wanted it cheap. Got some small rolly wheels, a small sheet of 1/2" (or 12mm for you metric types) playwood, and some cheap screw in rolly wheels. I was actually impressed with…
Eternity is a greatsword whose appearance switches between Sunrise and Twilight depending on the time of day.
Fully Tested v1.2.1 Hardware Needed: 1) E3D Revo HeaterCore (100k Creality Sprite) | 1pcs - https://e3d-online.com/products/revo-heatercore?variant=41549447168059 -…
This model is compatible with the lego system.
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
This is not a printable thing, this is not a guide. This is a cheatsheet. Direct Serial connection from RaspBerry Pi (GPIO pins 8, 10 and 14) to SKR 1.4 (Turbo) This cheatsheet shows which wire goes where and what to configure in the Pi,…
I used the following one, i can't guarantee that all AliExpress versions will fit though. https://www.aliexpress.com/item/1005006503495825.html?spm=a2g0o.order_list.order_list_main.16.13111802lsBWzr This will fit the M2, M3, M4, M5, M6…
Modified backplate to allow use of a common 9x9x12 heatsink on the camera board's chip that can overheat in hotter enclosures over time. https://www.amazon.com/MECCANIXITY-9x9x12mm-Heatsink-Transistor-Amplifier/dp/B0CMPYZS4T There are…
The RTL-SDR Blog V series is a decent little receiver, but as a dongle it hangs delicately off of a PC's USB port and is easily broken, especially when used portable with a laptop. This case securely encloses and supports the dongle and…
Skyrim Daedric Greatsword Main work by Bethesda https://bethesda.net This is my attempt to use an ingame sword for 3D printing. I extracted the files directly from skyrim and reworked them so it is printable. The sword is splitted into…
2020-07-09: I needed a VESA mount for my raspberry pi 4 which has this heatsink installed: https://shop.pimoroni.com/products/aluminium-heatsink-case-for-raspberry-pi-4?variant=31116595888211 However I thought it would be nice to just be…
The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…
Reference of current GeeekPi heatsink/cooler Links for the CAD projects I use to make the change: Top case (no STEP): https://www.tinkercad.com/things/36RtgzKxmBp-rpi-4-case-top-for-geekpi-fan Bottom case (STEP):…
Tired of picking up hook that felt along with picking up a towel ? ME TOO ! I've designed the hook to be extra thick and durable, I wanted this thing clip onto the heater and to last forever. Obviously safer option would be PETG, but I've…
I added a cut for heatsink
Original Beats Studio 3 headbands break all the time. I have already purchased several of them and Chinese imports tend to be hit and miss it terms of quality. Band should be printed with 10% infill, if possible ends on both sides should…
This is a set of Lego compatible greatswords from the video game Monster Hunter World. The handle piece is universal, while the blades can be interchanged to make either the Bone Blade or the Buster Sword. I plan to make some more blade…
Made the base shape from :Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) The beads pictured are at 70 percent scale! so if printed at 100 percent they will be larger 70 percent size is probably the…
Fix for a ripped mounting hole on a Volkswagen heatshield.
Modified from my original design without the use of radiotbo's cad model This is the original SLM heatshield I created for the VZbot Goliath hotend. It replaces the original silicone sock which is only good up to 300C. It is recommended…
This model modified the original fan mounting part to fit 80mm fan, which allows more air flow to make the GPU even more cooler. Also the inner has been enlarged a little for the shrinking of ABS prints. The original model was created in…
Edited the single honeycomb to allow for a M3 Heatset Insert
Skyrim Daedric Greatsword Main work by Bethesda https://bethesda.net UPDATE: Added Missing Files BladeP17 - BladeP23! This is my attempt to use an ingame sword for 3D printing. I extracted the files directly from skyrim and reworked them…
I decided to create this mod after noticing how sharply the driver temps changed up and down, this led to me tearing my U1 down to investigate. What I found, was that the stock heatsink was placed on the topside of the driver chips.…
I strongly recomend printing with PETG or any better heat resistant filament, as PLA might deform inside due to the high temperatures the inside of a computer can get while gaming or any high load task. Specifications: -No supports…
Currently this file is uploaded as STEP AP242, which is incompatible with Solidworks. I will upload a version which is in STEP AP214 or AP203 which are compatible with Solidworks. I just took 2 models (e3d threaded heatsink and e3d v6…
This is a modification of https://www.thingiverse.com/thing:3001109/files. To allow it to mount nicely on the MK3 frame using the two vertical M3 screw holes. FYI the vertical and horizontal scree holes are 43mm apart. I have added the…
I recommend saying “no” when your slicer asks you if you would like to update the model dimensions. Then, scale the model to 10,000x it's original size to get something reasonable that you can then scale how you would like. The modal can…
Print using Supports (Everywhere) then pick open the gaps for the ports. Designed For: PI Zero 2W ETH USB Hub Hat (b) SKU: 20416 Part Number: ETH/USB HUB HAT (B) Brand: Waveshare Dedicated Aluminum Heatsink for Raspberry Pi Zero Series,…
ASRock BC250 to AM4 Cooler Adapter Why Does This Exist? I wanted better air cooling for the APU in my ASRock BC250 Steam Machine. The existing AM4 adapters I found did not accurately account for mounting height or the offset processor…
remixed IamStarGoat's model to be able to fit over the heatsink for the CB1
This Raspberry Pi Zero 2W case was designed around the Geekworm C296 Heatsink to have a low-profile and sturdy construction. The case, heatsink and Raspberry Pi are held tightly together with M2.5 screws and nuts. The nuts are inset flush…
There are already very good alternatives available, but none of them seem to force the air flow on the fins of the BTT-made CB1 heatsink. This version tries to make sure that all the air exits only through the fin channels (give or take)…
This is my first attempt at modeling something. I wanted a case that could fit at least 10 SHORT tips + all of the aliexpress brass heatsets. This includes a slot for the M2.5 heatset. It can hold up to 4 standard length tips, 2 near the…
Improvement of the original model. Vylepšení původního modelu.
I wanted to start organizing my studio with some wall storage, but I didn't want to drill the wall more than necessary. So I designed and printed this model to hold some spare IKEA table tops I have, they are quite heavy (140cm 10kg and…
This is a remix based on https://www.printables.com/model/214126-eva3-dragon-hotend-mount-hex that allows to use a Trianglelab CHC Pro hotend setup with the standard EVA3 carriage assembly that can be found here https://main.eva-3d.page/…
I printed 3Daomm's M3 wallet in december 2021 and had 2 major ideas for improvement: Heatset inserts to avoid screwing into plastic. Creep and forces on screws in plastics are not my best friends. The lever actually had 7 steps despite…
This is a print-in-place dispenser for lickable treats for cats. It reduces the messines of using such treats and allows to retrieve every last drop from the tube. The model was tested by printing in PETG using 0.4 mm nozzle with 0.2 mm…
replaces the part covering stepper motor on the toolhead of any K1 printer to allow addition of a stepper motor heatsink to reduce heat buldup in the extruder and hopefully reduce or eleiminate jamming. PRINT IN A HIGH TEMP FILLAMNET. i…
The design is a ball with treats. For easy refilling of treats, a hole with a thread and a plug. The plug should be printed with 100% infill. We print the balls with a maximum of 30% infill, or less depending on the capabilities of the…
Simple edit for the MINDA probe mount to add a heat shield to help prevent the hotend from heating up the probe, since it does not have a thermistor (Like the PINDA V2 on the MK3S) to compensate for it heating up during long days of…
This is a case for the Rock Pi 4 SBC with installed large heatsink. The top part snaps on the heatsink to create a tray that slides into the base part. Thanks to another snap fit both parts should stay together without screws. There are…
The blue plastic fan shroud that came with my printer snapped right in half. After supergluing it for a while, it just became too much hassle. While waiting for a new fan, I remodeled and resin printed a replacement. This is a little more…
