Liczymy pasujące modele…
Custom coaster with Enviromental Hazard icon/sign. Decorate your home with something special. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
Padlock protection from the environment, a very simple and reliable way to protect against sun, rain, snow and prevent rust, fading and freezing of the lock. Such a protected lock will last a long time and reliably because the grease will…
Custom wall or rack mounting bracket for Ubiquiti UniFi Environmental Sensor. The bracket offers two mounting options: installation in a standard 19” rack or mounting with M3 screws. In both cases, the screw head height must not exceed 2…
This is a collection of cases for the Heltec WiFi LoRa 32 v3/v4 boards. It holds the board, a battery, and optionally an environmental sensor. The button (PRG) can be pressed and the reset button (RST) is accessible via a pinhole (use a…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
This is the official 3D Modeling ToolKit for the JSAUX ModCase for ASUS ROG Ally（PC0119） . With this toolkit, you can easily design custom accessories for the ModCase, unleashing your creativity. Download the STL files to start 3D…
Web/Built Accessibility Coin - A11Y - Support Web & Built Environment Accessibility (NFC Option) The Web/Built Accessibility Coin - A11Y is a 3D-printed token designed to promote accessibility in both digital and physical environments.…
Introducing: The Humanoid Atmospheric Bio-Suit! Whether exploring the depths of the ocean, or the void of space, or the depths of oceans in space, the H.A.B. will keep you warm and safe no matter the environment. Thank you to all the…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
This is a hardware-free, fully 3D-printable radiation shield designed to protect environmental sensors (like the FS400-SHT31) from sun and rain. By shielding the sensor, it allows for more accurate ambient temperature and humidity…
Replacement lock ring for Apeks first stage environmental seal. This avoids the ring seizing on and is tool free servicing. Works for Apeks clones too. eg. Hog as pictured. I CNC'd mine out of delrin but a high quality print might do the…
This is a Mangrove Toy meant to help teach about different ecosystems while passively playing. It is pre-plated and the part that need supports are the “Tree Branches”, “Tree Roots” and “Tree Roots Small”. (Croc included) Filament colors…
Edit 03/07/2025 - We have updated the name to be more appropriate. This is the Icy Environment Playset- the second in our environmental playset series meant to help teach about different ecosystems while passively playing. It is…
A natural waterfall environment playset to encourage kids' learning and imagination during play. You can match your filaments to other playsets or toys they might have or mix and match them with our other environments found here-…
As with the original remix, the case is split into 3 parts for easier printing and assembling. 8 heat set inserts and 8 m3x8 screws. Heat set inserts are to be inserted into the middle part on both sides. Note: according to the handling…
Padlock protection from the environment, a very simple and reliable way to protect against sun, rain, snow and prevent rust, fading and freezing of the lock. Such a protected lock will last a long time and reliably because the grease will…
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
A natural desert environment playset to encourage kids' learning and imagination during play. You can match your filaments to other playsets or toys they might have or mix and match them with our other environments found here-…
Print tips: Lay the faces of the surfaces flat on the build plate. If you have a well dialed in printer you will not need to use supports. If you don't, use tree supports. Please see the readmes in the original. You may want to increase…
Purpose: Track hedgehog health/activity and reward him for running with mealworms. Disclaimer: Mealworms have unfavorable Ca:P ratios so either feed calcium gut-loaded mealworms or other treats that are good for their health How: Wireless…
I have created this set of dungeon environment tiles for my high school dnd club. These models have allowed us to elevate the immersion of our campaign. As there are many different files here is the following guide to each piece and when…
This is a speaker enclosure designed to work with the multi-board environment, meaning it will attach to your walls and add spaces for additional bins to attach to it. BOM: 2 - https://s.click.aliexpress.com/e/_oB0EJqW 15-60w 3 inch…
Lockable Milwaukee M12 Battery Holder – For Upside-Down Mounting & Shaky Environments Keep your Milwaukee M12 batteries secure, even in harsh or mobile environments, with this lockable battery holder designed for professional use in work…
I built my own enclosure for my ender 3, but wanted a drybox extruder, I liked the price, availability and size of the sertilite 20l/q gasketed box. This system is meant to rest with the lid down on top of an enclosure or desktop I used…
Environment Sensor Mount Combined and modified the following models: https://www.printables.com/model/1080201-hygrometer-thermometer-mount-for-a-reptile-enclosu…
Environment Sensor Mount Combined and modified the following models: https://www.printables.com/model/1080201-hygrometer-thermometer-mount-for-a-reptile-enclosu…
The project A small screw-top container designed to hold silica gel, which is useful for removing moisture from 3D printing environments. Designed for uncomplicated FDM printing and strong. Dimensions External diameter: 70 mm Height: 35…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Custom wall or rack mounting bracket for Ubiquiti UniFi Environmental Sensor. The bracket offers two mounting options: installation in a standard 19” rack or mounting with M3 screws. In both cases, the screw head height must not exceed 2…
This is a collection of cases for the Heltec WiFi LoRa 32 v3/v4 boards. It holds the board, a battery, and optionally an environmental sensor. The button (PRG) can be pressed and the reset button (RST) is accessible via a pinhole (use a…
This is a LoraWan sensor I created partly to test out LoraWan technology for the first time at home. I wanted something flexible that I could install inside another building and trust to report back to the antenna mounted outside my…
S.A.F.E. – Sensor Array For Environment (Unitree GO2) Modular Raspberry Pi 5 payload for the Unitree GO2 robot. Designed for environmental sensing and easy hardware integration. Sensor Integration HC-SR04 Ultrasonic: Front-mounted for…
This model is part of a portable, low-cost meteorological monitoring system developed as a functional prototype for local weather observation in hurricane-prone island environments. The system is built around an ESP32-based portable…
Don't know what to do with the purged line of filament from each print? Well, once you've got a handful of them, you can use them to make this little brush. This brush is a bit more challenging to put together than other 3d printed…
Case for the UrbanIoT mobile environmental monitoring sensor See more information about the project here: https://www.hackster.io/philippmanstein/urbaniot-mobile-environmental-monitoring-421463
Housing to hold the Pimoroni Enviro+ as well as the particle detector. The housing has recesses for 3mm x 1mm magnets to hold the backplate in place.
F-14 Tomcat External Environmental Control Panel
While automating my home using Home Assistant, I found that I needed to sense motion, temperature, and humidity in multiple locations throughout my home. So, I created an enclosure that bundles a 30-pin ESP32 module with microwave/radar…
This is a state-of-the-art environment simulation that I created so that I can test out my robotic creations in an isolated environment before I release them into the real world. It would be unfortunate if one of my robots misbehaves and…
The following is largely a copy/paste job from my GitLab page . The instructions on Thingiverse should take you through the basic setup. For more information, including the Helm chart to deploy data collection and visualization, check out…
I printed rcmz's print-in-place (PIP) Tensegrity. Thanks rcmz for sharing this fantastic model! My PIP outcome was pretty humble due to shitty filament, maybe also due to sub-optimized parameters. But throwing 400grams of material with…
TMEP I have installed TMEP to our local web server as a super simple frontend for monitoring. https://github.com/MultiTricker/TMEP/releases But you can also use (more polished and developed) web version at: https://tmep.cz/. This manual…
This is the local environment of a node in an octet-truss. The struts are made from rhombic dodecahedrons which have their faces facing in the direction of the octet-truss struts. 3D images: Sidenote: I've added some images for unaided 3D…
This is a case for the Environmental / Presence Detection sensor. See: https://github.com/Schwayla/Environmental-Presence-Detection-Sensor
I created this simple tool for working under my Prusa MINI hotbed. Any magnetically attractive tool is immediately sucked up to hotbed, no matter how careful you are. This wrench is strong enough to work on your 3D printer and features…
This is a collection of models related to the JSAUX Modcase for the Steam Deck. Their intended use is to be imported into a CAD project, so you can build compatible accessories around them <3. JSAUX has released an official set of models…
Remix of Wemos D1 Environmental Monitor to fit a ESP-WROOM-32 (without headers) Support me at: Buy Me A Coffee
I designed this to test mounting points for a mini hygrometer/thermometer module. The mount is designed to attach using the enclosure's left door hinge mounting screw.
I needed a way to protect some environmental sensors (temperature, humidity, Baro) outdoors. The sensors must be exposed to fresh air to perform their job, but never get splashed by water droplets. The original was a lovely embossed pill…
About the print This print is part of a larger project I am working on to implement Mycodo into my hydroponic garden. The goal is to have several modules that can connect independently, with ‘break out boxes ’ for different sensors,…
Sealed antennas like those found on the Alaska SD70MAC locomotives.
SEN55, SEN54, SEN53 Environmental sensor mount. Print with support.
This is a housing that I designed for my Smart Environment Sensor that is based on ESP-12 module (ESP8266 MCU) and a BME280 temperature / humidity / pressure sensor. It's designed to be supplied by some kind USB power source and can be…
This is a small wall-mount enclosure for the RAK mini board. It hosts a LiPo battery, the RAK board with its core and a temperature/humidity sensor.
I really liked scrat82's “ j1772 plug holder with cord management for EV cars and chevy Volt ”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was unable to find a version for the Tesla…
This is a case I remixed for a plugged-in environment brightness sensor using Wemos D1 mini and dome type BH1750FVI brightness sensor module . There are two pitfalls about this sensor module: It contains an on-board regulator so VCC can…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
Sun and rain protection for a mikrotik LTE router Printed on white PETG prusament To join the two pieces in the visor there are holes 4 mm in diameter and 5.7 mm deep to be able to place M3 threaded inserts. The base also has 6 holes for…
The specific dry boxes I use for filament are difficult to look into from some angles, and I was sick of looking at an app every single time I wanted to know what the humidity was in the dry box. This will allow you to mount the Sonoff…
This is version 2: Original model here . I really liked scrat82's “ j1772 plug holder with cord management for EV cars and chevy Volt ”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was…
See the video for details and find links for the materials used in that video.
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
I drive into Germany from time to time and need an environment sticker to go into the cities. Since most of my time I drive in The Netherlands I don't need the sticker to always be on my windshield. I created this little holder that fits…
![Environmental Sensor [WIP]](https://media.printables.com/media/prints/98944/images/1000936_60234269-4b9c-4a61-ad42-946ec21fd320/9db8ca111dbfb89a8f59606e4383acea_display_large_98.jpg)
