95 modeli
This is a respooler for the Prusament spools to hold either samples, or to pull filament off of another spool. I designed this over the course of 5 days in Fusion 360, and it's my first model that I've created using the program. I…
Wydruk około 7,45 €–9,11 € nettoWstępna wycena jednego wariantu
This is to fit the: Kodak 35 mm U-Core 2 inch / 52mm film core/spool and 400ft to 100ft Bulk Film Respooler by @MaslovyRohlik originally the [Thingiverse] 400ft to 100ft Bulk Film Respooler by @broken_perfectionist This is a handy device…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
I looked around for respoolers but couldn't find anything that seemed as convenient as I wanted it to be. This basically adapts a universal spool holder by closing the inside of the shaft and adding a hole that perfectly houses a long hex…
I recently needed to respool a spool of filament because the original spool wasn't compatible with the Bambu Lab AMS. All already existing models needed some additional hardware, which I just didn't wanted to bother getting. Thus I…
Print the screw sideways and use support for the bit that goes in the drill, the rest can be printed without supports. I used “paint on supports” in Bambu studio. Also for the ring, use inner > outer walls ordering otherwise you might…
I found some old filament in a box, but the spools didn't fit on my enclosure's spool carrier. I'm trying to figure out how to do stuff in Blender and thought this would be a fairly easy project. Respooler Files filamentRespoolerBit -…
Wanted to reduce the amount of filament used compared to the hex version. wanted to be able to see the amount of filament remaining, a space for the filament sticker, and an “attractive“ design, something a little different. managed to…
Double speed at :25 Update 1 nov 2022 : added a Python script for creating gcode for different spools. See the end of the description. I got my hands for a few weeks or so on a new printer with an automatic filament switcher (AMS). Great…
YES, again next Filament Respooler , BUT…. like always, I dont like complicated things, i used an idea from others , but i did printable almost without suports. and also more stronger. My print from others was weak, lot of suports and lot…
I didn't have the correct bit (3/8" (9.5mm) socket adaptor drill bit) for The Respool Tool (https://www.printables.com/model/325988-the-respool-tool-respooler-) so i made one. Printed in PLA with 6 walls, 5 top and bottom layers and with…
Edit 28-Dec-2025 : I apologieze that I forgot one complete subassembly. I missed the filament guide system. I added it today. Sorry for any inconvenience. First of all I like to kindly thank @GekoPrime for his development of the base…
this is a Remix https://www.thingiverse.com/thing:6787267 and https://makerworld.com/en/models/683303 the base of the FC01 was modified with 3D builder to graft the Organizer on it. all this was redone in Blender. The base has been…
I got a bunch of (Free) tiny 250gr spools from chinese scammers but since those won't work with most auto-filament-feed systems I needed a way to re-spool the filament on regular 1kg spools. I don't need it to be tidy only to be on spools…
I made a spool holder with two identical halfs. I printed it with a 0,6 mm. nozzle and a layer height of 0,4 mm. Printing time: 4h28. I used squar nuts M5 and Torx bolt M5 x 25. I used my large CoreXY printer with print area 500x500x250 mm.
Introducing the 8mm hexbolt remix of the very nice model made by Geert Bevin. I found myself in a situation that incorporated big filamentspools, printers of various sizes, not enough desk space and a considerable amount of small presents…
This remix uses a 1/2" socket hole because that's what I found convenient to use. Compatible with gen 1 & 2 of the universal spool holder. For the quick-lock nut you need: 3x M3x8 ISO 10642/DIN 7991 Countersunk Head Screw 3x M3x6 ISO…
A tool to respool any filament onto this ( https://www.printables.com/model/345540-formfutura-refill-masterspool ) MasterSpool. Required parts: 1x 120mm. M8 Threaded Rod 3x M8 (lock)nut Add a 120mm piece of M8 threaded rod and an M8…
Hand crank for the Pastamatic spool rewinder. I like the idea of a hand crank but the original design was difficult to use. This one has more clearance and a longer bit. I also made quite a bit of changes to the appearance. Let me know…
If you're looking to transfer another brand's filament onto an original Bambu Lab master spool without modifying it, you probably need this. It fits perfectly and has holes to lock the filament onto it. No support needed.
v2.0: Added a version with larger hole, for people who print without hole compensation. --- Check original for more info. Didn't have the USA size bit so decided to remix this to fit my own. Uses a 6mm hex bit (modeled it at 6,1mm to fit…
This re-spooler works similar-ish to what the Filamentalist project uses but is adapted to work with the "Auto-Rewind Spool Holder for RepRack" and some inspiration taken from the re-spooler in the 8-track project . For full details head…
I printed it in Sunlu PLA+ using the 0.2mm Strong OrcaSlicer profile (6 walls, 10-15% Cross Hatch infill) on my Bambu Labs X1Carbon. A brim is wise on the axle, or it may lift at the threaded end. No supports are needed for anything…
*Be sure not to push the filament end in too much, as the hole is tapered and it may become too tight for the AMS to pull it out, I have been pushing it in about halfway as pictured and it comes out easily* No more hook ends at the end of…
I am a big fan of all of the upgrades designed for the BambuLabs ReSpooler by @Damian27 . My printer (BambuLabs X1C) struggled to print the Handle with no supports. So, I thought I would give a shot Designing one that is a bit more…
The design is similar to that of FbeauKmi's Filamentalist F1 but adapted for the BoxTurtle. Print parts (for 1 respooler) ABS 2x Wheel.stl 2x Hub.stl Settings : 20-40% Infill TPU 95A 2x Tire.stl Settings : please activate Spiral Vase mode…
I wanted it to go on some 6.5mm drill bits I have laying around.
Device for winding a fishing line with a screwdriver or electric screwdriver Bom: • M5 screw • M5 nut The «cone» and «fixing_nut» do not require supports. The «shaft» is printed with support. The hole must be cleaned on the «fixing_nut»…
Designed a quick and dirty Adapter from a 9.5mm to a 6.25mm socket bit for the Respool Tool. Now it fits to the smaller bit on my bit-set. Used a hammer and a little force to put it in the orig. Respool Tool. :) Now I could use it with my…
Take instructions from the original. The only change is the modification from 9.5mm to ¼" (6.5mm).
This spool is a modification of Blizzard's V2 parametric core Bambu Labs spool designed to accommodate Bambu filament refills: bambulab_spool_narrow_modded_v2_different_core_diameter.f3d…
This is a remix for the motorbox for the Automatic Filament Rewinder made by Warpster . This motorbox holds 2 nema 17 motors, instead of one, driving the axis that winds up the spool. Since I was having trouble winding with one stepper…
I had a few empty Sunlu spools laying around and didn't want them go to waste. By using this model you can make your own reusable eSpool with a few materials. Just take out your hacksaw and chop up your empty Sunlu spool. Make sure it's a…
I have a lot of problems with the original Boxturtle Respooler wheels. The original design worked fine if you used PLA, but it didn't account for thermal expansion/shrinkage of ABS. Even with my chamber temperature stable(60c +-1c), the…
This is not standalone, combine this with the Ultimate Filament Respooler . Print it, and stick it on it. It is flat, but holds just fine.
Having been a bit short on filament, i made a hexagon cut out (right handed) frame remixed from and for Les Kayes popular Spool Winder . Only the remixed frame is published here, pick the other parts from the original post linked above.…
Additional hardware: 4x M3x12mm flatheaded screws 2x M3 threaded inserts
remix complet de l'écrou et changement du filetage de la vis avec un meilleur règlage de serrage
MK4SMMU3 PETG Filament used 131.2 g / 42.95 m / 103.31 cm³ 0.4 mm 0.2 mm Infill density 15% Support material yes rotate base diagonaly as on picture Experimental Version 2.1 - 400ft-100ft BASE ONLY Version 2.0 without sidewalls Version…
Mit dieser Spule wickele ich meine Nylon Schnur auf, die Einzelnen Teile werden in der Mitte verrastet.
Fits into Prusament Spools
This design is an adaptation of the Filamentalist Passive Filament Driven Rewinder (Passive Respooler) originally designed as part of the Voron ERCF project. Details of this design and any follow-up revisions can be found in the reference…
A simple and minimal filament spool winder that is fairly quick to print and easy to store. I liked all the fancy spool winders on Printables but I didn't want to spend so much time and effort on something I would use infrequently, so I…
Adapter plate to fit Sunlu Spools and a 6.2mm drill bit on LittleSilvrs Respool Tool
Description Besides the use which I will outline below, this model can also be used as a somewhat-universal spool for filament refills of different brands: Are you constantly having to respool filament that comes on cardboard rolls in…
free spinig wheels with oneway clutch magnets in ring and frame needs to bee repelled extras 4x using 75mm long hex7 m5 standoff, need to cut 8x 6705 bearings 80x 3x3 magnets 8x m5x10 ultra thin flat wafer head 8x F695 bearings 8x 5mm…
As respooling any is always a hacky process, this drill adapter is a very simple model to put into your drill to help you respool. I've used this on old spools by just binding this Tool against the spool using cable ties. I recommend…
If you have ever struggled with the inconsistency of cardboard spools, this upgraded version of my filament refill spool holder is for you. I've redesignet it so that you - with the included adapter - can attach a drill to the spool and…
Take instructions from the original. The only change is the modification for 6.25mm instead of 9.5mm
Drop in replacement for one of the rollers on the “Auto-Rewind Spool Holder for RepRack” (found here ). Allows mounting respooler from the 8-Track project (which is smaller version of Filamentalist). Though in order to actually use it on…
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
Quickly strip old fishing line from a reel using a drill or impact driver and the cardboard tube from a toilet paper roll. The standard ¼-inch hex shaft fits directly into a driver’s quick-change chuck or a conventional drill chuck. The…
I like the internal spool holder idea, but the designs were a bit strange. You need a way to release the spool when swapping, so I came up with the Idea of using magnets as a sping. That was a waste of time. The second prototype used some…
This file was requested on the functional 3D printing FB group. This is the 110mm size which is ideally suited for holding 50 meters of 22AWG Wire. I used this calculator to plan the size...…
These are additional parts for using the PASTA lite Receiver with thin spools (25-30mm). Print the replacement lead screw and any one of the spacers using the same settings as the original…
Print one part twice to create a complete reusable spool for standard 1 kg filament refills. RESPOOL is a two piece reusable filament spool designed for a wide range of standard 1 kg refill coils. It supports Bambu style refills as well…
Ever tried to clean up spent shock tube by hand? This respooler allows you to attack a drill to the shock tube so you can quickly reel it up. It is designed for use with any common drill. To assemble this you will need the following: 3D…
Add a 6mm hex bit to the base and chuck into a drill to make respooling filament faster.
This is just a remix of the Wheel Drives, but with heatserts for some of us that are a bit more heavy handed.
This is a drill attachment to refill empty Auto Feed Spools (AFS) using .065" replacement trimmer line. I originally created this to cut down on waste, but the trimmer line I used to refill the spools actually seems to last longer than…
What this is This is a spool intended to fit large quantities of spool-less filament to respool it onto a "normal" spool. It could also be used as a variable refill spool. Through my own stupidity and a “little” accident I dropped an…
I post two versions of spools: One with full closed side which prints fastest. Another with partly open sides. This in four colors, MMU or AMS needed. The shims fit perfectly, I carried them over from original. One crucial improvement is…
Halterung für zwei Filament-Spulen am 40x40 Profil Dieses Projekt hat das Ziel, eine flexible und modulare Halterung zu entwickeln, die an einem 40x40 Aluminium-Profil eingehängt werden kann. Sie soll zwei Filament-Spulen aufnehmen und…
Bambu Labs style spool - reusable - designed for respooling. Same as original but has solid walls instead of walls with honeycomb pattern openings. This makes the walls stiffer so filament winding won't expand them outward thus avoiding…
This is still a work in progress but i think it's ready to test print? I have included only the fusion360 and step files so far as im yet to print and test any stl files 😅. il be updated and adding the stl files as I test. any feedback…
How to use put two spools of filament onto the center column. The full spool goes on the top, the spool you would like to put filament on goes on the bottom. Wind the filament around the guiding column, and spin both spools simultaneously
A simple magnetic storage box for LTS Respooler, can be used to store power adapter, spool nuts and spares. Can use magnets for mounting temporarily or screw the box to the respooler permanently. For Magnetic Attachment: Use couple of…
Add an electric motor to run your pastalite respooler. Use three of the pins to attach the case to the base model. If the motor run in the wrong direction reverse the two wires running to the motor. See thge document below with the…
I created this model to hold the hook up wire that I use in prototyping circuit boards. It is designed to hang on the bin rails we have on our work benches. The parts are designed to print without supports. The rear of the holder has a…
Fits spools up to 105mm or 4" diameter. Post is 8mm or 5/16" diameter. I printed at 90% infill 288g for post strength and weight. It 'stays put' very well while you reel.
Cable spooler mainly for UBS cables, but with scaling to cable anything is possible
OneSpool: The ultimate universal master spool for almost any filament refill. I wasn't happy with the existing master spools, as they are generally designed to fit specific refill filament brands or got some weaknesses in there design.…
So, I ordered some filament on 2kg spools, but those don't fit any of my other spool holders and won't fit atop my MK3Ses, so, I needed to re-spool the filament to 2 “normal", 1kg spools. I already use these spool holders for my…
This model is a way to reuse the plastic part of a prusament spool. If you don't have a empty spool, don't worry, you will have it before you finish printing this model (it's become a little more bigger than i expect). Every wing are made…
Makes respoolers a lot smoother by having 3 instead of 2 set screws, and can't unscrew itself with it's own driving action. Uses 3 M3x8 SHCS per wheel
A simple to make, snap together, low cost tool to save time swapping line on your fishing reels. I printed at .2 layers and 15% infill with a brim, any filament will work fine. Schematic included for lithium ion battery and charger module…
Filament refills are more and more common but the cardboard tube size is not standardized and MasterSpool designs waste a lot of filament. TubeSpool is a parametric model made to be adapted to all tube sizes. Based on the design of the…
This is an accessory I designed for my filament winder, based on Tomik s Cuprou's "Fast Strong Automatic Respooler" - specifically V1, since this project started before V2 came out (link to his page, files not included - download them…
This is a small wire spool that I designed to help cable manage my desk. I ended up using 3 of these (3 power strips) and some zip-ties to manage the underside/power for my desk items. This has multiple holes for zip-ties to be passed…
This model adds downward feed as well as moves the hygrometer to be facing the same side as the PTFE tubing. Included are files for a large desiccant bin. If you decide to use the straight through PTFE connection you can print the “PTFE…
The wire I have was spooled around various diameters, so I need different spools to hold them nicely, without rewinding.
This is a storage solution for your TOES (totally overengineered filament sample spool). Holds up to 9 spools. Just print the parts and assemble with M3x10 screws. The feet are optional but come in handy if you want to use the same box…
This model is a 36x46mm spool that is designed for wires and soldering wires.
This is an accessory to my spool holder for the CORE One as well as for the new spool holder for the Prusa CORE One+. The flexible arms lean against the edge of the spool, preventing the filament from jumping over the edge and get tangled…
But it also fits approx. 4m of 1mm solder wire very well. You will just need 3pcs of 3mm woodscrews, with a thread length of up to 8mm, i used screws with 6mm long threads. Countersunk or flat head screws, it depends on your preference…
Sure you could buy a filament roller, or print one, just to respool your filament but the obvious solution came to the engineers at MadLab on April 1st and we wanted to share it with the world. Just use your printer to print the spool and…
This prints in two pieces and uses M3 heat set inserts and M3 bolts to securly bolt together unlike the spin lock stuff that just spin unlock during a print. You can throw this at the ground and the filement isnt coming off it. An…
This remix uses a 1/2" socket hole because that's what I found convenient to use. Compatible with gen 1 & 2 of the universal spool holder. For the quick-lock nut you need: 3x M3x8 ISO 10642/DIN 7991 Countersunk Head Screw 3x M3x6 ISO…
Edit 28-Dec-2025 : I apologieze that I forgot one complete subassembly. I missed the filament guide system. I added it today. Sorry for any inconvenience. First of all I like to kindly thank @GekoPrime for his development of the base…
Bambu Labs style spool - reusable - designed for respooling. Same as original but has solid walls instead of walls with honeycomb pattern openings. This makes the walls stiffer so filament winding won't expand them outward thus avoiding…
I like the internal spool holder idea, but the designs were a bit strange. You need a way to release the spool when swapping, so I came up with the Idea of using magnets as a sping. That was a waste of time. The second prototype used some…
These are additional parts for using the PASTA lite Receiver with thin spools (25-30mm). Print the replacement lead screw and any one of the spacers using the same settings as the original…
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
I got a bunch of (Free) tiny 250gr spools from chinese scammers but since those won't work with most auto-filament-feed systems I needed a way to re-spool the filament on regular 1kg spools. I don't need it to be tidy only to be on spools…
Quickly strip old fishing line from a reel using a drill or impact driver and the cardboard tube from a toilet paper roll. The standard ¼-inch hex shaft fits directly into a driver’s quick-change chuck or a conventional drill chuck. The…
Updated stability Mod for - Mechanical transfer device for respooling filament. Prints on a single plate.
