142 modeli
NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…
Co-author: @JakubJoziewic_498185 VOCs (Volatile Organic Compounds) generated from 3D printing (especially ABS) are known to cause severe health issues. This model is an updated version of Nevermore Micro V4 Filter created for 3D printer…
Nevermore Gate bookend/middle. Ein eyecatcher für dein Bücherregal
Just made a one-and-done gcode for lazy people like me who want a Nevermore v6 enclosure fan. Parts you'll have to provide are 2x 2 pin WAGO 221 lever connectors, 2x 5015 blower fans, 2x M3*4*5 heat set inserts, M3 screws (forgot the…
I want to thank everyone that contributed to the Nevermore project. It has been a very useful modification to my Voron. The new V6 design offers some nice improvements but I wanted to redesign some of the parts. I remixed the cartridges…
Thanks Black Tie, that worked a treat ; ) Hopefully this is what your after : ) I sharpened one with more defined lines and left the other smooth, so your choice : ) As always check the sizing suits your needs and post some picks if you…
A snap-in mount for Nevermore micro V4 on Voron0 or other small printers with 1515 extrusions so no preloaded nut is required. Requires 2 Voron-spec heatset inserts (M3 x D5 x H4). The clip mechanism is adapted from the screwless probe…
Bring the soul-devouring presence of Nevermore, the Shadow Fiend, to life with this highly detailed STL file. Perfect for 3D printing enthusiasts and Dota 2 fans, this model captures Nevermore’s ominous form with dramatic flair, making it…
Update: 2023 Feb.28 I uploaded pair of ACF exhaust blocker. Since it's nearly impossible to make a bag of activated charcoal as a really square brick, and it'll leak by the two sides. Adding these blockers should make leaking to minimum.…
The Schmilter is a remix of the filter with a number of features I wanted to include. Added lid height and base depth, to allow for the fans to be fastened to the base with no heat-set inserts needed. Heat set inserts to fasten lid…
In order to improve the Qidi Q1 Pro handling of Volatile Organic Compounds (VOCs), a chamber circulation fan which doesn't blow out the air, makes sense. Since the Nevermore is a beloved air filter for this use, I designed a mount that…
Nevermore Academy logo - Wednesday style I recommend color change printing
The slider mechanism of the original Nevermore v6 did not work at all for me and I gave up after some attempts. I still wanted to open the cartridge tool-less, so the original mod didn't quite work for me either. That's why I made this…
[…] And the Raven, never flitting, still is sitting, still is sitting On the pallid bust of Pallas just above my chamber door; And his eyes have all the seeming of a demon’s that is dreaming, And the lamp-light o’er him streaming throws…
Clip Version of the Nevermore V6 Micro Plenum-Body for the 1515 Extrusions. This is just the body with Supports.
Darkdog supplied an stl to mount the nevermore v4 at the front of an ender 3 switchwire conversion, I have mixed this with the original front panel mount to create these mounts, left or right or both. I have revised the mounts with…
Evermore (by Taylor Swift) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
When constructing the Nevermore Micro V4 fan you need to glue it in a centered location. If you do not get it exactly centered the fan can rub on the outer casing. I created this tool to help place the fan perfectly centered. The tool…
As filtration system for core one is still not ready, and even pla smell is not great in an apartment, I created “backpack” attachment for core one. It utilises (quite plenty of) nevermore style carbon pellets and existing chamber fans to…
The 2 3010 part cooling fan usually isn't enough when you want to print faster with material like PLA. Since I put my printer outdoor, so I don't want take off the side panel to prevent the dust. So I use the base of…
Print Settings - Standard Voron parts BOM: 1 M3x6 BHCS 2 M3x8 BHCS 1 M3x25 BHCS 2 M5x16 BHCS 4 3x4x5 heat set inserts 1 Molex 2 position female connector (optional) Nevermore Github: https://github.com/nevermore3d
This is a nevermore V6 micro mount for your enderwire conversion it only uses 1x m3x16 SHCS to hold the nevermore in the mount
This is a modified Nevermore duo plenum for mounting in a Voron V0 with magnetic components for easy installation and removal. A JST-XH is no fun to plug in and remove in a tiny little printer frame, this is way easier once set up. PRINT…
This is the straight version for the v6 cartridge door mod. I use this upright in my VORON Switchwire.
An alternative, open lid for the Nevermore V5 to improve efficiency. https://github.com/nevermore3d/Nevermore_Micro
A Fanduct to use the Nevermore Micro V5 Duo as external part cooling on Voron 0/0.1/0.2. https://github.com/nevermore3d/Nevermore_Micro Print it standing without supports. update (06.04.2023, V17): some little adjustments, height fits for…
If you like this model and use it please upload a like, it really helps others find it! I couldnt be bothered to take my V0 apart to get some nuts in to mount my nevermore in there, and I didnt wanna order 1515 tnuts cause I'm very…
I recommend color change printing Logo and Base can be joined without glue
Keep your Nevermore carbon fresh when not in use. Uses a gasket for an airtight seal. Gasket designed with 1.75mm TPU filament (no printing necessary for gasket). Printed latches provide a positive snap for confirmed closure. Gives good…
Single Fan Extension for Nevermore, based on The Filter Single Fan
This model is loosely based on https://www.printables.com/model/981928-qidi-q1-pro-nevermore-v6-filter-mount, but completely redesigned to fit on the right side of the chamber. I have designed in slots for M3 nuts. This was printed in…
This is the nevermore micro V4 adapted for the Prometheus MSLA. We simply replace the Voron logo by the contrapposto shop. This is not our design. You can find all the info, instructions and original STLs from…
Remix of 0ndsk4's Carbon filter for V-Core with enhanced exhaust geometry. Posted here with permission of author. Exhaust now blows air more sideways so bed is not cooled from below. Exhaust angle is not changed, only position. Basket…
This simple mount allows you to mount for Nevermore V6 (2020 Extrusions) to the Qidi Plus 4. It sits in the front right between the door and the aux cooling fan. It replaces the chamber exhaust fan on the mainboard. Install Print and…
This is a replacement lid to add a HEPA filter (80x40x15) to a Nevermore Duo V5. If you have a 3d printer, you should use a filter (HEPA + active coal). If you don't know why, please read carefully the part of the nevermore project with…
This is an additional base for the magnet mod Nevermore duo to fit a Bambulab X1C. You will require the same parts as for the Voron V0 version, plus some VHB tape to stick it down. There is a cutout on the bottom to align with the “L”…
Overwatch Nevermore Mask split into 2 and 4 parts :)
There is an opinion that the lid is broken, so I added an easylid of a slide type Insert the lid in the form of a slide and secure it with a 6mm FHSC bolt Additional 6mm FHCS and heatset insert are required…
Another Wednesday series gadget. Looks good when printed in colors.
This is a handy little scoop to help load the Nevermore Micro v6 with carbon pellets. The narrow scoop fits within the slot of the loading area of the Nevermore Micro v6 to avoid spilling carbon everywhere!
A simple funnel (plus a bonus cup) designed for feeding charcoal into Flying Gyroscope 's NeverMore Micro V6 Easy Mod cartridge. Material: any Supports: none Layer height: 0.2 Nozzle: 0.4 or 0.6 Brim: recommended
remixed mount and plenum for Nevermore V6
Taylor Swift album evermore, CD holder wall mounted
Nevermore Academy Gravure en relief impression en trois couleur (Fichiers joint pour Prusa MK3S+) Fond Bleu foncé Mauve dans l'idéal, Noir et enfin Jaune Tropicale ou similaire. Format 186x207 mm Ep 2 mm
In making the Nevermore Mini I wanted to use the full nevermore controller over bluetooth The Nevermore Mini project on Github and Printables has a screen holder for the Pi Pico 1.28" so I remixed it to support the generic GC9A01 screen…
Made a version that takes older roomba filter. amazon link here https://a.co/d/6A4MGYh
In order to fit the fans into the plenum a few small cuts need to be made with flush cutters. I highly recommend wearing safety glasses when trimming pieces off of the fans as they WILL go flying. First: cut off the wire retention clip on…
A simple mount for the Nevermore V6 and the E3NG. It mounts using the 2020 mount on the Nevermore and the Klicky mount on the electrical panel on the E3NG. This mod is NOT compatible with the Klicky, as it uses the mount for the docking…
I've been having issues with the fragile tab (used to hold the fan cables) snapping off during assembly, as it snaps across the layer line when applying a minute amount of pressure. Admittedly, this doesn't affect the operation of the…
This model has a height of 2.6mm, with the white layers being 0.6mm for a more subtle look. Settings I used to achieve the print: - 0.2 nozzle - 0.10 high quality layer height - wall generator: arachne - 20% infill, line
A fanduct that can be used instead of a carbon filter cartridge on a Nevermore V6 Micro. Attaches using magnets, keeps clearance for Rainbow on a Matchstick. As the model is currently prone to warping on the floor, there's clearance for…
Hello everyone! I thought a small filtration system wouldn't hurt, which is why I created this simple and inexpensive little mod. I am providing the STEP files for the two components that change, feel free to give me feedback Its the…
Hueforge print of Taylor Swift's evermore album cover. Print at 0.08mm layer height, 0.16 base layer height., 100% infill. Filament Colours Used: Overture Matte Black Sunlu Grey Sunlu Coffee Overture Cream Sunlu Meta White Swap…
Lithopane for evermore by Taylor Swift. Printed at 0.16mm layer height, vertically. 0% or 100% infill, depending on your filament type and personal preference. I printed at 0% on transparent filament which looked kinda cool. Print…
I needed a bare bones Nevermore V4 mount for my Voron V0 that left as much room as possible for lighting etc. Couldn't find what I needed, so I reworked Jafal's great Nevermore Switchwire mount. Only works with 1515 extrusion, requires 2x…
Assembly and printing are no different from the original Nevermore Micro V6 and Easy Lid remix. Printed parts needed: (1) V6_nano_plenum (1) V6_nano_lid (1) fan_clamp (1) cartridge_straight (1) grate_straight Non-printed parts needed: (3)…
I could not find the same pogo connector used in the original model, and the one I purchased on Aliexpress (https://www.aliexpress.com/item/1005004407370088.html) would not fit the mount. I modified the mount to be able to be used with…
a quick and dirty remix to make this mod compatible with GDStime fans
I designed a base for the Nevermore Micro V4. One for a 2020 and one for a 3030 profile. Printed with PETG because I am using it in an enclosure. You need 2 M3 heat inserts and 2 M3 screws with T-nuts according your profiles
I adjusted the VEFACH (Voron Exhaust Filter Activated Coal + Hepa) vent holes for use with my Nevermore brand carbon pellets. When I measured the pellets they were a little over 4mm in diameter and the length was always greater than that.…
Remixed the base to stand on its own. In case you want to have the filter standing in the enclosure instead of mounting it to your printer's frame. As with the original base, you need 2x M3 heatset inserts to mount the filter to the base.…
Cartridge for the Nevermore Activated Carbon Filters - Micro Edition V4 printable in four parts: bottom top 2 x mesh screens Using 6xM3 6mm screw and matching heat inserts to secure the top. This model avoids the tricky amount of bridging…
Tune up your Wednesday cosplay costume. Print in 0.2mm layer with two color print or set your slicer to change filament in the middle of the print (M600 command)
Printing Recommendations: Standard Voron print settings Use Brim or Brim Ears to avoid sharp corners from lifting The parts are oriented the right way Included .step file can be used to make changes if needed Required Hardware: Nevermore…
I really like the original Nevermore Duo, but I had a mod making my printer unfit for this filter. I remixed the original model to the size of a single fan, but keeping the magnetic charcoal holder I like so much. Now it fits nicely, and…
This allows the nevermore to be mag-mounted (including electrics) - details here - https://www.teamfdm.com/files/file/564-handle-and-nevermore-mount-to-magnetic-panels-by-bravefruitcake/ Based on this magnetic panel conversion -…
Update: Fixed some dimensions and added chamfers on the lower magnet bar for style. V1 is still in the files if you like it better without those changes. These are magnet holders to replace the stock front door magnets on the Troodon 2.0…
This is a simple stand to clip Nevermore Micro V4 and make it stand on a table. This allows the filter to be standing upright without attaching to anything. Useful for printers like Original Prusa i3. Additional Parts: (2x) M3 x 5 x 4…
The model is an alternative to the “Base”-part of the nevermore project (https://github.com/nevermore3d/Nevermore_Micro/blob/master/V4/BASE_V0_1515.stl) and can be used to mount a Nevermore Micro V4 to a Voron 0. BOM: 4* M3x10 button head…
Since I can't mount my Nevermore directly to the printer, but still wanted to control it via the KlipperExpander. I built a small magnetic connector for the Nevermore air filter. So you can get the printer out of the housing without a…
This is the holder for the Nevermore v6 inside the Qidi X-Max 3 Much easier to replace filter cartridge thanks to the great design from the Voron team If you need to print the Voron Nevermore v6, print this for the cartridge part…
A custom fan shroud that converts a Nevermore V6 into an auxiliary cooling fan for Voron V0 printers with Dragon Burner toolheads. The shroud is printed as two separate parts (A and B) that will fit the V0 bed which are later glued or…
Support for the album Evermore (Taylor Swift). Printed in PLA, with support, and a filament change.
The original lid on the V5 is waay too restrictive, and I didnt like the other plain lid on here, idk it doesnt look like it belongs on there. So I made one that looks more like the original. Available in 2 versions which print either…
A Small mod of the V6 Catridge by cutting off 2.25mm of the top edge to give it enough clearance for the Kinematic Bed.
Extended the 1515_Frame_Connector.stl so the mounted plenum would clear the Y-rail carriage
This sled is used to hold the 5v-12v converter that comes with the Blurolls Nevermore Kit from AliExpress
Holder for Nevermore V6 filtration system. I use 3xM3 screws that I found around to screw it to the holder. There are two additional teeth from the bottom that supports filter carriage. Attention! Holes does not fit perfectly as it…
I wasn't able to get an umbilical routed through my Nevermore Stealthmax S, however i found the great Another Toolhead Umbilical mod that inspired this updated Back Panel Mount.
Taylor swift evermore logo i made for my kid. one of her favorite songs is evermore. not the best logo but it works. thanks for checking it out.
This is intended to be a quick test bed for determining the shape and length of the evasé to get even flow thru the filter stack, as well as determine the length of the filter stack. Cannisters stack together and everything connects via…
Modified to hold the Pi Pico inside and mount two sensors for air quality that will regulate the fan speed
This sled is used to hold the 5v-12v converter that comes with the Blurolls Nevermore Kit from AliExpress
Allows you to mount the Nevermore filter using magnets to the top of FLSUN printer You will need: 2xM3 14mm screws 2xMS nuts 5x 8x3 magnets - Use some glue if you want to secure them, however they hold with friction as well Print with…
This is a compact internal fume extractor and filter designed for the SV08 and other printes . It serves the same purpose as the popular Nevermore filter : actively circulates chamber air through activated carbon to reduce odors and VOCs…
The mod allows to change the carbon without unmounting the bed and position the filtre on the back. The idea is to place the filter on the back and let the air flow under the bed. Original Designer:…
This is a Nevermore Micro V6 mount for Fizzytech's variation of the Enderwire. Should work with standard Enderwire builds, the only difference is that the FT Enderwire has holes for the enclosure panels (Fizzytech's enderwire doesn't use…
As I'm printing ASA I want a filtration system inside my Sovol SV08. There's not really anywhere to fit a Nevermore Micro v6 at the base but this mount can be installed into a top hat at the top of the printer. You could always use it…
I wanted to add the Qidi logo to the original model for design reasons. So I modified the original model from Obelisk89 . It's just adding the logo (negative, positive). You print the positive as is without any dimension adjustments. It…
This is a magnetic mounting system designed to mount a Nevermore Mini air purification system (see link at bottom of description) at the rear of a Snapmaker U1 3D printer. Specifically, this has to be the standard Nevermore Mini that uses…
NEED m3-6 x 1pc m3 Nut x 1pc FT Bento Mini mount using FT Panel Clips - FT 1515 Key.stl x 2pc FT Bento Mini mount using FT Panel Clips by Fizzy | Download free STL model | Printables.com 1515_Frame_Connector.stl x 1pc…
Universal nevermore v5 duo mount. Apply a small dab of super glue or VHB tape to the mount, and install it in any printer. Slicer settings MATERIAL-ASA Nozzle-0.4mm LAYER HEIGHT-0.2mm INFILL TYPE-Grid, Gyroid, Honeycomb, Triangle or Cubic…
I made this because i wanted a way to be able to exhaust my air out of my chamber if it was to hot.
This is an adapter for mounting a Nevermore Micro V6 inside a Voron Switchwire (standard Voron dimensions) near the front-left panel. Note: Depending on the length of your Y chain it may hit the adapter when homing and when printing on…
Use M3x8 SHCS with M3 t-nut for mounting and a standard Voron heat set insert M3x5x4
Decided to make something that'll hold my Nevermore v6 fan and have the exhaust point away from the print. Needs just 2x M3*4*5 heat set inserts in the arms, appropriate screws for the sides of the Nevermore fan, and mounts to the…
Remixed Frontcover for Nevermore Mini
This is a remix of a Nevermore Micro V5 Duo Plenum Lid to allow for more airflow without having to upgrade to V6
I don't know that this will work on a conversion, it was designed for an LDO kit. Requires a Voron spec heat insert, M3x8(?) screw, M5x16 screw, and the Nevermore 1515 mounting flange. I sanded the extrusion alignment tabs off the flange-…
![Nevermore V6 Micro Aux Fan Duct Adapter [Proof of Concept] for Voron V0](https://media.printables.com/media/prints/769438/images/5986970_c956c956-9851-4992-aae7-aeba00a74413_28959fe5-24ce-4ac2-b408-f1cbc0bfb969/img_20240217_212102.jpg)
