429 modeli
Here is the Model for my Barrel that I made after being inspired by playing Sea of Thieves there is the option of either a standard lid or a Money Box Lid lid to store your booty Both are a screw fit and is a nice secure fit once…
Wydruk około 4,24 €–5,18 € nettoWstępna wycena jednego wariantu
Catan board game card holder - with card sleeves compatible For cards dimension: 68x44mm (only card) / 70x47mm (card with sleeves) The models in the photos are printed on 0.1 layer height. It is advisable to glue the foam legs to the…
Wydruk około 8,90 €–10,88 € nettoWstępna wycena jednego wariantu
Easy to print Ashen Chest Key from Sea of Thieves (SoT) Three versions of the model is available to print: AshenKeyFlatBottom is for FDM printing, bottom is flat so no supports needed and it prints fast at 45 minutes at 0.2mm…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Sea of Thieves coaster - Skull Diameter : 100 mm Sous verre Sea of Thieves - Crâne Diamètre : 100 mm
Wydruk około 2,21 €–2,71 € nettoWstępna wycena jednego wariantu
To use this, you will have to increase the size of all model parts to 135% !!! (the menhir is already resized) After the first print of Obelix (https://www.prusaprinters.org/de/prints/127997-obelix), I had the idea of using the menhir as…
Wydruk około 13,53 €–16,53 € nettoWstępna wycena jednego wariantu
Sea of Thieves coaster - The Reapers Bones Unearthed Diameter : 100 mm Sous verre Sea of Thieves - Les os de la faucheuse font surface Diamètre : 100 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
For a better result I recommend cutting the model in half and then gluing it.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Sea of Thieves coaster - The Merchant Alliance Diameter : 100 mm Sous verre Sea of Thieves - L'alliance des marchands Diamètre : 100 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
The work tray on the Park Tool PCS-10.3 Deluxe Mechanic Repair Stand has holes for tools, but loose L-shaped hex keys sit unevenly and the smaller ones can fall through. This insert fits snuggly in the holes on one side of the repair…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
EN : Utensil for play kitchen Material : PLA Layers : 0.3mm Supports : nine Brim : yesEN: Utensil for play kitchen Material: PLA Layers: 0.3mm Supports: nine Rafts: yes PS: The upright position is for aesthetic reasons and requires a…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
While printing for a long time, I noticed that the cardboard roll wears out, which creates dust, which is an undesirable phenomenon when the bed is closed. The sleeves effectively reduce this, so there is no dust at all.
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
Absolutely love the idea by @LeonH for the monster trays and other card holders. I printed all in PLA (prusament galaxy black / eSun fire red / eSun white/Sunlu green (turquoise)) with 0.6 nozzle and 0.3mm layer height (text with 0.2mm).…
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
AirTags are a great way to keep track of your valuables, especially while traveling. An AirTag thrown in your suitcase, or hanging from the handle of your bag will provide some peace of mind, and make it easy to recover misplaced luggage,…
Pulled from the game Sea of Thieves and repaired for printing.
This is a remix of the Sea of Thieves Megalodon by mordekain . I smoothed out a lot of the model to remove the semi-low poly look of the original and split it into pieces for easier printing. A very minimal amount of supports are needed…
Climbing Cheese Thieves Mice This comic image can be hung on a door or on a shelf. The thing consists of two parts. In order to complete it, you will need glue and a paper clip . I think it won't be a problem for most of you, but just in…
The Chest of Legends from Sea of Thieves. Printing: For best print results, print the emblem and chest separate. I have provided the chest without the emblem (chest-of-legends-no-emblem.stl) and standalone emblem…
Stackable sieves in 3 sizes. Print instructions Use mesh modifiers to have the lower part printed without top or bottom surfaces. Adjust the infill density for different mesh sizes. Recommend grid infill.
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
I designed this in Fusion 360 and designed it to be printed without supports. The files should print properly without you having to rotate anything. When I printed it, I used a variable layer thickness for certain layers of the parts to…
I made this coin from Sea Of Thieves a while ago, but never uploaded it here… Stupid! So here you go! I hope you like it, and post a Make if you recreated it! This model can be printed without support, flat on the buildplate.
Haven´t found a model for the Ashen Key and wanted to try this a small asset for my new sla printer. Printed on a Elegoo Mars 2 Mono
Modular LED channels for hexagonal acoustic (or 3D printed) panels. The channels are designed to be printed with 0,4mm nozzle. Assembly material: Hexagonal Acoustic Panels 30cm x 26cm 3D printed Channels LED Strip: Minimum 60 LED/meter (…
Good working sleeves for XT-60 connectors. Larger holes so it works with 4mmq wires and inside more room so it will snap on. Snap on but better to use a little drop of CA My favourite material is TPU but PLA works fine.
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
1mm. 1.5mm. 2mm. 2.5mm. 3mm. 3.5mm. 4mm. 4.5mm. 5mm. Sieves with square holes. 100mm.x100mm. Note:1-3mm. holes are likely going to be printed slightly smaller.
5mm. 5.5mm. 6mm. 6.5mm. 7mm. 7.5mm. 8mm. 8.5mm. 9mm. 9.5mm. 10mm. Sieves with square holes. 100mm.x100mm.
I just added this assembly to have everything in place needed for a complete support of an 30 cm or 40 cm sized Eurobox ("Bauhaus" version). You can just load the complete print bed definition. Everything prints fine w/o supports in 0.3…
Doporučuji zapnutí funkce “umožnit tisk převisů” A nebo tisk Podpěr :)
This is a case that I Made to hold Trading cards in toploader card sleeves, (Baseball, Football, and similar). It will fit around 80 toploader card sleeves. The lid sits on top, with a ridge that holds it on, but loose enough to be…
Print tips, I used a brim inside and outside as the original file looked like it was warping on my printer. I printed gyroid at 10% infill and first layer about half the speed of the default speed of my printer.
A highly detailed and realistic bust of John Wick , inspired by the legendary character portrayed by Keanu Reeves . This 3D model captures the intense expression, sharp facial features, and iconic style that made John Wick a modern action…
This is an insert designed to hold everything you need to play The White Castle with the Matcha Expansion . It supports premium sleeves (up to 46.2mm x 71.2mm), and has a few design elements intended to make setup slightly easier. It…
2mm. 2.5mm. 3mm. 3.5mm. 4mm. 4.5mm. 5mm. Sieves with round holes. 100mm.x100mm. Note:2-3mm. holes are likely going to be printed slightly smaller.
0.4 0.5 0.6 0.7 0.8 0.9 1mm. sieves 0.4mm and 0.5mm sieves may print slightly smaller.
5mm. 5.5mm. 6mm. 6.5mm. 7mm. 7.5mm. 8mm. 8.5mm. 9mm. 9.5mm. 10mm. Sieves with round holes. 100mm.x100mm.
Border to sit 300mmx300mm square sieves in.
This is an insert designed to fit the game Dune Imperium Uprising plus the expansions Rise of Ix , Immortality , and Bloodlines . This is an updated version of my original insert which supported only the two earlier expansions…
Behind the somewhat unwieldy name lies a small tool that can be a help for those who get beads of sweat on their forehead when thinking about changing a component that involves dismantling a textile sleeve on the MK series. It is very…
This is a simple Sea of Thieves themed keyboard key that fits most mechanical keyboards. I recommend printing with a .4 or smaller nozzle and at half layer height to get the best result and detail. Best printed in one color and painted if…
Basically a fun little project me and my audience did while livestreaming. These cases fit into the blocky tokai lighters and they give you the ability to personalize your lighters. WARNING: NO COLORS BECAUSE I HAVE A MAJOR SKILL ISSUE.…
Attached are all the files and images of the finished box insert It is tight fit between the two sections as I couldn't do dividing walls for the cards and I had planned to slip a thin piece of plastic or paper even just to help with the…
A simple model I made from the game: Sea Of Thieves, I hope you like it! If you have printed it, post a Make! I would love to see it.
Źródło oznaczyło ten model jako treść 18+.
Remixed from: https://www.printables.com/model/1304829-daggerheart-limited-edition-box-insert-for-cards-i Added some dividers Reduced some divider width to 1mm from 2.1 mm to fit additional dividers Removed the middle divider so long…
This is a remix of Micahol's Sea of Thieves gunpowder barrel. I've chopped it up for easier printing - you need 2x of Side.stl & 2x Pin.stl to make for easier alignment while gluing, and one of everything else. Stencil.stl is a thin…
New mount that allows to mount a wind turbine on a vertical surface. You can use sleeves instead of bearings.
This design might be a little big, but it is that way on purpose, so you don't end up damaging your better cards trying to squeeze them in. You can scale down the design in your slicer if you would like.
The key to unlock the loot in the Skeleton Fort!
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the elusive and prized Stormfish found across the Sea of Thieves. Can be placed on a wall as is or via a plaque…
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the elusive Wrecker fish found across the Sea of Thieves. Can be placed on a wall as is or via a plaque (coming…
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the Common Spashtail fish found all across the Sea of Thieves. Can be placed on a wall as is or via a plaque…
10.2.2024 Uploaded new version of Card Divider V3 v1 ------------------- Edit: 24.10.2023 Uploaded tray, that fits on the last free space in the box - I use it for Ready/Used tokens, that can be downloaded here:…
This is just a remix from the original author My wife modified these to fit sleeved cards. Figured I would share.
Diese Siebe ergänzen mein System zur Mehlwurmzucht: https://www.printables.com/de/model/647981 Sie dienen zum Sortieren der Mehlwürmer nach Größe. Mehrere Siebe können übereinander gestapelt werden und zusammen auf einen geschlossenen…
Picture Frame for Trading Cards in Ultra Pro Top Loading Sleeves The slot is just the right size. Slides in just right. Very satisfying. Fits the 3x4 basic sleeves. The tall Sleeves are a bit to wide for this frame. Plus those longer ones…
ENGLISH This was my first creation in the world of inserts because, although I liked the Stinkfoot71 https://www.thingiverse.com/thing:4911563 design, I didn't want to have the set in 3 boxes, Since I didn't know how to design anything…
Updated for better fit.
10.2.2024 - Uploaded new version of Card Divider V3 v1 ------------------------------------------------- Hi everyone, i have just created Insert for Marvel Champins LCG - ALL EXPANSION, because i could not find one, that i would fit my…
I printed this insert (https://www.thingiverse.com/thing:6330224) but found it was too large to fit in my box so rather than remix I just made a new design based on it. Perhaps there's a size difference between regional boxes? Mine was…
FINAL UPDATE Version V2 - May 19, 2025 I have added a new print profile encompassing all (9) sieves ranging from 0.4 mm to 5.5 mm. Criteria for determining infill percentage are summarized in the following figure: Furthermore, this new…
model fixed for better printing
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
NOTE: I designed these models using my MC9 with the Taylor Freelance backstrap installed; however, the TF backstrap sticks down more than the stock ones. I'm in the process of updating the models, so anything with "TF" in the name is made…
I've been wanting a way to easily manage tons of cables around my desk and aquarium and came up with this. The inspiration came from Midvale and his cpap hose clamp. I completely redesigned it so that it would snap better, print easier,…
sea of thieves PS5. Xbox Controller stand remix
A deck box for the Lotr LCG Starter Decks "Elves of Lórien", "Riders of Rohan", "Defender of Gondor" and "Durin Dwarves"
various sieves inner Diameter ∅30,40,50,60mm mesh 1mm 1.5mm 2mm 2.5mm
UPDATE 2025-01-23 I have updated this insert to add support for the Bloodlines expansion. You can find that here. Original posting: This is an insert designed to fit the game Dune Imperium Uprising plus the expansions Rise of Ix and…
I love it when my filament is perfectly dry, so I do everything I can to achieve the lowest possible humidity inside my Ace Pro . I'm presenting a container for silica gel or molecular sieves . I personally use 4A molecular sieves and…
El modelo original es GENIAL solo hemos agregado unos refuerzos para su mejor duración y resistencia a la temperatura. Lo hemos impreson son Epet de la marca 3N3 producido en Argentina. Es un material del cual no se ha visto mucho pero…
CURA SETTINGS: Rotate STL file on its Y axis (Red line in Cura), until its standing up like in the photos. Don't try to print it on point (unless you want to prove me wrong) -- it doesn't work. Choose "custom" for print setup. -Enable…
Allow me to introduce some designs for attaching AirTags to your possessions: You can choose from a sturdy or slim version , each with single or double buckles . Print in PLA or PETG. For extra-extra sturdiness add perimeters and set…
Easy to print in place. I used PETG for more stability. No supports, 0.2mm layer height with a 0.4mm nozzle.
A dispenser for Top Loader and Regular/Perfect fit sleeves
Friend of mine wanted a shield of Athena, i could not find any File,so i took it upon myself to get the model. its the Original Model from Sea of Thieves so enjoy :D, Picture is coming soon as im Printing this myself right now
The deluxe edition of Rebel Princess didn't fit sleeves. I used sleeve kings for this. It will also fit the promo princess. Thanks!
Quick-to-print sleeves to help organize gift wrapping paper. You can write on them if desired to indicate their purpose or any other message. Included both a 40mm and 50mm size that can expand to accommodate slightly larger sizes Gcode…
Quick remix of the original to make it a bust model A bit of process and some other fun with the original model: https://youtu.be/YG1I1Hl67y0 Category: People
These are sleeves that will fit over a Remarkable pen / marker (fit to the Marker Plus), which supports the replaceable stylus tip. The plastic structure on these markers that normally supports the tip is very thin and brittle. Dropping…
This is Devesto! A strange character of unknown origin who wields a Roblox studio building tool as his weapon of choice. I do not know where this myth originated from, as not even the wiki has any info on him. but he is a purchasable skin…
Updated files of the great Mage Knight Insert - Ultimate Edition (by Thogra) to better fit to cards without sleeves. The height of the boxes was reduced but the pins still works. The ZIP file contains all updated STL files. For the cards…
Rather than printing a whole new set of wheels, these sleeves fit snugly over the stock tires and turn your Typhon Grom into a drifting machine. They're 3mm thick and last a very long time. I recommend printing in PLA or PETG. I used 4…
This is an insert designed to fit the retail version of Earth from Inside-Up Games. It supports premium card sleeves—I use Arcane Tinmen AT-10423. I have also added some card tableau grids (printed in two pieces per player), all of which…
Sea of Thieves standing logo for desk or can be sliced down from behind to make a sign or plate. The model with the Sea Blue outline is the original model size that was printed on an Ender 3 Max Neo. The one in Blood Red outline is at 75%…
I designed these years ago, and they've been holding up great. The side dovetails let you securely combine a number of them together. There's a sloped back, counter to a retaining edge on the front top that keeps the batteries from…
just print and stick together ..the skull fits into a grove on its pedestal but the feet just stick on so just centre them ..standing the model up on the pedestal and just sliding the feet in under seems to be the best way to make sure…
2025-04-10 Update - Version 1.2 In response to several folks whose games have much thicker tokens than my game has, I have redesigned some parts of this insert to better accommodate these "thick tokens," as well as made some minor…
I printed at .2mm height with 5% infill. No supports needed.
Adjusted the deck box and deck box lid to accommodate for double sleeves.
I pulled this directly from the game files.
This is an insert designed to fit the retail edition of the game Pirates of Maracaibo and supports premium sleeves. It also supports the player board and island overlays I have designed and posted here . The boxes with lids print best at…
This is remix of @_741944's The Loop board game Insert for larger sleeves. These are just the components that hold cards. The original insert is amazing, but my sleeves (Sleeve King) were slightly too large, so I modified the insert to…
Sleeves for JST-XH connectors. Especially: XH-2A (2-pin) XH-3A (3-pin) XH-4A (4-pin) XH-5A (5-pin) XH-6A (6-pin) The connectors print without supports in two halves. The halves can be glued together but personally I just use a small ring…
20-Card Case for M:tG JumpStart boosters, resized for DragonShield Matte Sleeves This is a remix that used the parameterization Fusion 360 file to adjust the sleeves for DragonShield Matte sleeves, as the original box is slightly too…
Sieves for sorting items based on size. They are designed based on Gridfinity bins, with a flat base efficient based to save on filament. They stackable to allow for layered sorting. We designed these to sort out some cat food as the cat…
When you are pouring unused photopolymer resin from your build tank back into the bottle it pays to keep your bottle upright because resin spills are both costly and nasty to clean up. Since I don't have two sets of hands I designed this…
ship crest of the voyager
![[Insert] 2 BOX Arkham Horror 3rd + All Expansions Premium Sleeves](https://media.printables.com/media/prints/572073/images/4575908_677e62dd-a657-4b4a-abd2-18d55e8842a0/ah3-core-box01.png)
