198 modeli
🔒 Introducing Custom 3D Printed Inserts for the Lifepod 2.0 for the Glock 17 Gen 5 Insert by Veracon Engineering! Elevate the security and organization of your firearm storage with our custom-designed Glock 17 Gen 5 Insert for the LifePod…
Wydruk około 11,86 €–14,49 € nettoWstępna wycena jednego wariantu
I used it as a motorcycle battery in JAWA 250/353 instead of leaded 6V battery. It saves a lot of place. Used cells are LiFePo4. Print instructions Printed from PETG or ABS
Wydruk około 6,46 €–7,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a tiny FEP tuner, just place this under your FEP film while tuning to get the right tightness of your film. The tuner has a height of 13mm wich gives your FEP the perfect slack before tuning.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
🔒 Introducing Custom 3D Printed Lid Insert for the Lifepod 2.0 by Vaultek! Elevate the security and organization of your essential gear with our bespoke Lid Insert crafted specifically for the Lifepod 2.0. Engineered with precision and…
Wydruk około 7,75 €–9,47 € nettoWstępna wycena jednego wariantu
Version 2 includes a little overhang as I had part of the terminal exposed in the original design.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
POWER QUEEN - 190ah LiFePO4 Battery Terminal Covers I needed a way to keep the battery terminals covered safely. I have several of these setup with repeaters up on mountain tops where it is a shared location. I didn't want some stray…
Wydruk około 2,56 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Field Expedient Phone Stand provides a rugged and simple way to prop up your phone. Use sticks, spare ammo, or whatever you may find in your environment to stick through the holes and brace the FEPS. The holes nicely accept 5.45, 5.56…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Keeps the dust and bugs out of the box. Printed in PETG. 0.2 layer height. You can use 6 m3 screws to keep it in place (not mandatory).
Wydruk około 2,96 €–3,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Para sustituir el aro original (que es bastante quebradizo) hemos diseñado en el equipo de Control 3D nuevamente el aro que une el FEP al tanque de resina de la impresora 3D Anycubic Photon Mono 2. Simplemente imprímelo y atorníllalo al…
Tool to make the tensioning of your Mars 3's FEP easier. It is recommended to apply kapton tape to the top surface to avoid scratching and/or denting the new FEP sheet. This was designed based off of the concept by PhoenixBlueStudios (…
Designed this for the large 2x 48v 280ah banks. Clips on decisively to the standard busbar with inside barrels that align with the standard nuts. Small cut outs in the terminal cover for the BMS sense and balance leads.
Description I was looking for a holder/spacer for a Lifepo4 battery set based on EVE 40135 cells. So no models were found and I decided to build my own. The model consists of 2 parts: a holder with additional places for busbars or wires…
ANYCUBIC Photon D2, Mono, Photon Mono 4K,Photon Ultra, 2pcs FEP Film frame. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Doesn't Matter Notes: I used some small supports only for screw…
This is a tool to replace the 13mm thick bottle cap recommended by Anycubic and position it in the middle of the bracket, makes life a bit easier when changing the FEP. Size is 220x145mm You'll need to make the top surface of the cylinder…
Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…
Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar. Balancing wires will go out at the sides you can feed multiple balance wires through the covers to simplify the wiring. Fits these busbars:…
This is my custom design for battery holders for 38120 LiFePO4 Battery cells.These parts can be used to make any arrangement of 38120 Cells in any series or parallel configuration! For my specific project, I made a 4S 8000 mAh battery…
Terminal cover for double screw terminal Eve LiFePO4 prismatic cells (LF304, LF280K). I printed it out of PETG with 0.2mm layer height. Fits snuggly. Pay attention not to press too hard on the overhanging part of the aluminum terminal as…
Simple battery box 4 280ah lifepo4 cells. Bottom and sides but no top YET. Hope it eliminates the need for banding cells. Cells are 174mm by 72mm by 207mm tall. Printed on CR6 Max with pla+.
Remixed to take my cells which were slightly taller. All parts included for clarity, but full credit to the original author for designing this awesome pack. Print Settings Printer Brand: Rafts: No Supports: Yes Resolution: 0.2 Infill: 15%…
I couldn't find a Tension Block for the Elegoo Saturn 2, so I made one. This one still has the same 8mm height that the official Elegoo video recommends. However, it is slightly longer. The original Elegoo Saturn called for an 80mm x 80mm…
Case for 4S EVE 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і активний…
IMPORTANT NOTE: If your battery's terminal(s) / terminal wire(s) get hot you need to ensure the printing material you use for this design will suffice. The included GCODE files assume the use of PTEG. This battery terminal cover is a two…
remix pochádza : https://www.thingiverse.com/thing:941081 -vložil som do: flexbatter_new.scad možnosť vytvoriť držiak pre LiFePO 32700 možnosť vytvoriť serie ,paralel viac článkov..
This is a replacement to the proprietary FEP frame Anycubic is trying to sell for their M3. Print two of the same .stl. The indents are mirrored so it fits into itself. You install it similarly to the way the old frames worked using a…
So my old FEP Film ring broke so why spending 20$ on new one when I can design it myself :D. Be sure to turn in the right way. I circled what you need to be careful of :). Happy printing :D
Montagehilfe für FEP-Folie – kompatibel mit Elegoo Saturn 4 Ultra Die Montagehilfe dient der präzisen Positionierung und Fixierung der FEP-Folie beim Einbau in den Resin-Tank des Elegoo Saturn 4 Ultra. Sie sorgt für gleichmäßige Spannung…
The squeegee for resin printers uses TPU filament, which can effectively protect the FEP film from being scratched.
These caps are a copy of a design by another company, which made these using an injection moulded process. They fit cells with top dimensions 130x36mm. This includes 75Ah, 90Ah, 105Ah cells and probably more. These LiFePO4 cells are…
This battery box was designed to replace the sealed lead acid battery in my APC UPS. The runtime is multiplied with this battery. If it is possible, you need to set the float charging voltage of the UPS to maximum 13,6V to not stress the…
Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar and sits snug. It has small slot at the both sides for the balancing wire. Designed using busbars that came with my batteries from nkon.nl.
LiFePO4 contact protection https://www.mivvyenergy.cz/cs/clanky-lifepo4/136-166-clanek-lifepo4-120ah-32v-higee.html
Case for 4S/8S Gloyuda 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і…
I wanted to make a hex version of my FEP scraper. Now with slotted alternative for resin vats! Sized larger than the dinky factory scrapers for people with larger hands.
model of lifepod5 from subnautica
A simple and quick printing battery spacer for the Liitokala LiFepo4 cells. Allowed for big tolerances. Possible to print with upto 0.6mm size nozzle without a problem. The batteries i used: https://s.click.aliexpress.com/e/_9hWKUw…
This is a model of a EVE LF280K battery cell for homestorage projects. They can be ordered from Shenzen Basen or Gobelpower with shipping from Europe so you don't have to fiddle around with customs and shipping from China. Good for…
Simple 80x80x8mm box with beveled edges meant to be a good size and height as a spacer when installing new PFA/FEP film. Designed for the Elegoo Saturn IV Ultra/16K, But should be well enough for other 10" resin printers. I made mine out…
The official YouTube video from Elegoo reccomends using an 80x80x8mm sponge: https://www.youtube.com/watch?v=D3LI2_m00Uk Unfortunately those are almost impossible to find where I live. I made this spacer and printed it on my Ender 3 Pro.…
Case for lifepo4 battery to replace the lead one these batteries were used: cbak lifepo4 ifr32140 Корпус для батареї lifepo4 на заміну свинцевої використовувалися такі батареї: cbak lifepo4 ifr32140 screw holes 3 mm PETG Category: Other
Need 3pcs screw 3x20 You can speed up print up to 150% on MK3s
A case for a well known active balancer board. I used melt-in threads, the board comes "upside down" because the parts that can get hot are on the other side. Make sure the cover is placed correctly over the transistors.
Custom FEP Frame for the Photon M3 that should allow you to use your own FEP sheet with it. Uses M3 4mm Screws & M3 x 2.5mm L x 5mm OD Heat Inserts Printed In PETG, Allows me to uses nFEP with my Printer Category: 3D Printer Accessories
Covers the busbar (and the nuts!) to reduce the chance of a short circuit. Available in 2x and 4x cell configuration. Friction fits on 11.2mm nuts - this allows clearance on any BMS wires/attachments. No supports required - designed to be…
Printed in petg, the more perimeters, the stronger it will be. I suggest inserting m3 bolts in the round protrusions as in the photos, otherwise they may break, also you may use a bit of glue to make the whole thing non-separable… I used…
BOM: Printed with ROSA3D High Speed PLA Army Green This is a functional replica of the standard plastic spatula often included with SLA/DLP resin 3D printers. It is designed specifically for mixing resin in the vat and gently checking for…
Keep the model face down on V1. The unit is orientated to allow use of unique finish build plates like diamond or carbon fiber to add a pattern. The design was done to be tight for the pistol to allow for very little movement. Also the…
On the first replacement of the FEP sheet the frame already appeared to be broken. Since it takes ages to get replacement parts shipped I modelled replacement frames that can be easily printed. I have printed the replacements using PETG…
LFP LiFePO4 Battery Case for LF280 cells with bolts Campervan LFP LiFePO4 Battery Case to build a 560Ah Pack fitting under the front seat of the following Vans (according to Flex636 should be working for starting model year 2006): Fiat…
Update January 10 I created a highly accurate .dxf/svg file of the SL1S precut FEP sheets and based this design off of that. Use double sides tape to hold the template down onto the protective plastic covering the FEP. I used a 2mm…
Tray inserts for a LiFePo4 battery pack for UPS 12V7A battery case. I am using a 30A BMS to go with the battery pack made out of Liitokala 32700 LiFePo4 cells. Mine measured at around 6300mAh when discharged from full to 2.7V (per cell).…
This is a quick remix of a terminal cover set for most 280-310Ah LiFePO4 Prismatic Cells. The original files for the busbars were well designed but unfortunately quite weak and so would consistently split apart when I tried to snap them…
TBD Print instructions Use PETG or PC filament.
Just a small tool to tension new FEP properly. The design is based on the sponge size from the Elegoo Video. Very cheap to print and do the job.
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem: Materiały ze składania magazynu na tej obudowie: - Jeżeli chciałbyś zapoznać się z…
Case to hold 4pcs 32650 6Ah cells with screw terminal or 32700 cells with solder terminal.
This is a dummy battery you can use to pad your battery holder when using LiFePo4 batteries. Add one dummy per 3.2V LiFePo4 AA battery to achieve roughly the intended voltage. Use two 10 mm M3 screws as the terminals, and any kind of wire…
Eve LiFePo4 LF304 Wirebox for your balance cables. Compatible with with: Eve LiFePo4 LF304 Terminal Cover Eve LiFePo4 LF304 busbar cover (nkon.nl)
Busbar protector made around tipical 20x90mm for 280Ah LiFePo4. Depending on your printer, aditional supports recommended on the holes. Any material. Mines are tested and produced with PLA+
Designed it for my 8S LiFePo4 Active Balancer for my 24V LiFePo4 battery bank.
A tool to help you align the T9 key when replacing a FEP foil on your SL1S resin tank. Other than that, the #1 advise for a painless FEP replacement is: get WERA 05028032001 TX8IP screwdriver. ____________ Printable on both MSLA and FDM.…
This battery is pretty nice, screwed casement, bluetooth, new EVE 320WH cells (x4). Low and high temp protection works. Needed something for my DIY Starlink + 5G battery box thing. Feels insane to know I have 1,200Wh in this Apache 3800…
I like building lifepo4 batteries; one of the easier to find types of cells I've used are these 25Ah lifepo4 cells that I picked up from batteryhookup.com (they have had them from time to time). These brackets do a few things: Provide…
This is my design for a modular cell pack using Topband 25Ah LiFePO4 cells. You will need: Various lengths of 6mm threaded bar 6mm ID 10mm OD washers Serrated flange nuts 4x Pieces of metal with drilled holes that conform to the "Link…
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem, dedykowane pod busbary elestyczne. Materiały ze składania magazynu na tej obudowie:…
Wrzucam mój projekt "Osłon" do zabezpieczenia terminali przy budowie magazynu energii z ogniw LFP / LiFePo4. Osłony pasują na dedykowane łączniki aluminiowe. Krótki Materiał na Moim Kanale YT: - Jeżeli chciałbyś zapoznać się z tym co…
This is a battery terminal cover for CALB LiFePO4 CA180FI and similar battery cells. It's designed to fit the OEM CALB bus bars with the OEM bolts, washers, and locking rings, and includes a gap for a heat shrink ring terminal for your…
ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…
Holder for Saft VL30P Fe LiFePO4 https://youtu.be/gAnFsZmzqos Category: Other
Hi Guys Now that its summer i realized the old design was too thin (it melted sitting in my car) and i also realized there no reason i couldn't Keep the cup holder functionality! if you printed the old design you know the struggle at…
Kit to install a JK BMS RESS (JK-PB2A16S20P) into a server rack battery / lifepo4 case originally delivered with a Pace 200A BMS (other models like 150A might also be compatible). Print mounting point adapter with supports. I used organic…
PETG should be used as non-flammable or less-flammable material. 15% infill is enough.
Protects your battery pole during installation. Covers the whole pole. Safety first!
Straight forward. Print the box and the box top. Put the battery cells in and then charge your cells.
I made this bracket to keep my batteries in a line. It's not intended to be strong. there are stronger ones. The idea is to make them wobble less. The wall is supposed to be 1mm, but for some reason it is less than that. I could increase…
Use this to put on the table as a spacer for when installing new film into your vat. Instructions are listed in website link shared below: I increased the Z height by 1mm to help with tension, 5mm seamed like it was too much, so just to…
This was the original, really. It's a non-slotted version of the FEP scraper/spatula/putty knife I use. Some people may want the extra body for scraping build plates like a 500lb gorilla :)
No nonsense FEP helper for installing a new fep sheet on the elegoo saturn Category: 3D Printer Accessories
BMS leiste um Kabel zu verlegen, bzw. um es ordentlich zu verlegen. Für 16 280A Zellen benötigt man vier Stück. PETG / PLA 0,4 Düse
Hi ! A simple soft 13mm height calibration piece needed during the replacement of the FEP Film of your Anycubic Photon You need a FEP Film And the process explained https://www.youtube.com/watch?v=DLi3chV43LQ I suggest you to print this…
This is the scraper I now print for vat cleaning. It is slotted for catching floaties in the resin so you don't damage your FEP. Not really ideal for the bed, but it can be used for it in a pinch. Model superceded by fully unlabelled…
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem, dedykowane pod busbary elestyczne. Materiały ze składania magazynu na tej obudowie:…
i designed this to replace the wooden lifepods that come with the retail version of the game. Quick and simple. Prints well at .20. Print Settings Printer: fokoos Odin-5 f3 Rafts: No **Supports:** No Resolution: .20 **Infill:** 25%…
Based on earlier ideas and downloads I created a FEP tensioner for Elegoo Mars 4 Ultra. This fits build plates 95x160mm. Designed with TinkerCad, printed on my BambuLab A1 with AMS lite with PETG. Variable layer height. After printing,…
Cover for battery terminals
Mask for screwing prevent damage FEP. Print instructions Category: 3D Printer Accessories
The Designs Goal was to to keep the Pack inside the Footprint of an Standard Acid Car Battery. Readymade Packs are always to tall to fit in one of the Batterystorages under the Front Seating of my VW T3. For the outer Framing use 10mm…
I made a small case to house 4S LiFePO4 to have a carry-around-sized battery in the 12V nominal range. I used salvage A123 26650's. You'll want to print of 2x of the cell holders, arrange the batteries in them, and spot weld the batteries…
I made this for use with a 7AH LiFePO4 battery. The nominal dimensions were 65mm wide & 150mm long ( 2.55" X 5.94" ). The dimensions for this battery are also shared by some vendors' 10AH and 12AH batteries. The provided model includes a…
Eine Simple Box für das Akku Pack
*****Bioenno appears to vary the actual size of the battery sometimes. This skeleton fits my battery fine but may need to be adjusted in your slicer to fit the dimensions of your battery.***** When I operate my amateur radio away from…
Für das 150 A Daly BMS habe ich eine Halterung gemacht. Ebenso für das Display. Und eine Abdeckung für die beiden Kontakte des BMS, da diese doch sehr exponiert sind. Für den Bluetooth Adapter habe ich eine kleine Halterung gemacht, damit…
Because I have multiple tanks and all the tanks look the same it's gotten hard to keep track of how many prints are done on each one, and which one had which type of resin in it. So I made this labelled FEP Counter which you can glue or…
Case for 2x battery pictured. You need two bolts and make threads inside them for terminal use.
This is a rough-and-ready make. I was doing a POTA and wanted to have Anderson PowerPoles instead of exposed battery terminals. Since printing mine, I've refined the design a little, but the main elements are all there. The PowerPoles are…
This hammer/tapping block is used to install Lifeproof Vinyl Flooring. The notch along the length and width of the block allow you to hammer the plank without damaging the tongue or grove. Print Info Filament: Inland PLA PRO (PLA+) Black…
Adapter for the Shelly H&T allowing use rechargeable AA LiFePo4 instead of a CR123 battery. It uses poka-joke to prevent wrong connection of the battery or Shelly sensor. You do not need solder. I used the jeweler copper wire and battery…
I designed a replacement FEP frame for the Anycubic Photon Mono because original replacements are becoming difficult to find and many existing designs online are not very reliable. This version is fully serviceable , meaning you can…
I recommend using the following models for assembly: https://www.thingiverse.com/thing:4619895 https://www.thingiverse.com/thing:5019436
