110 modeli
A simple teaching aid to locate European countries and identify their flags. It is designed for students aged 12 to 15.
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This is a case designed for an WS2812B RGB Module and an Arduino Pro Micro, as per amstudio's great explanation video at https://youtu.be/4oywox9-B-o . This provides real-time information for sim racing drivers such as the current gear in…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Why simply reproduce something when you can make it a little better? Classic pie token and wedges for Trivial Pursuit, but 25% bigger and the wedges now have a “flag” making them much easier to insert/remove - helpful if you have any…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
A simple post stylized in the form of the flag of Russia. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Parts Wheel (Pinwheel 3.stl) The week had 3 blades, you can combine two of these parts for a full 6 blade wheel. Snap the ends of the blades to the center sduds to from the blade shape Pin (Pinwheel Attachment.stl) This part can be used…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple patch stylized in the form of the flag of Russia. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in sequence: 0.0…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Každá vlajka má tolik *.stl, kolik má barev. Je potřeba každou barvu tisknou zvlášť a pak dodatečně slepit lepidlem a pak přilepit brožový můstek, nebo spínací špendlík na zadní stranu. Brožový můstek koupíte třeba zde:…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Part These clips can be combined with Party Flags by Quin | Download free STL model | Printables.com , which includes the spacers and attachment parts. Printing tips Take a look at The Card Clip.3mf shows the orientation of the part that…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parts Streamers Add these parts to a string of party flags. The number in the filename of the model corresponds to the number of revolutions of the spiral. When hanging from the string, the streamers is have about the following height…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I always wanted to be able to look across the room and see the color order more easily on my spools. Magnetic flags only take 8 minutes to print and can easily be moved to new different slot position. You can see a video here -…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Simple patch stylized in the form of the flag of Ukraine. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using M600 command). The individual colours are printed in sequence: 0.0 -…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
A simple patch stylized in the form of the flag of the Czech Republic. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Part These hooks can be combined with Party Flags by Quin | Download free STL model | Printables.com , which includes the spacers and attachment parts. Printing tips The models work best with a 0.3 mm layer height. Print more See the…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parts Spacers The Party Flags can be snapped to each other or spaced out with a selection of spacers. Printing tips The models work best with a 0.3 mm layer height. Print more See the Party Flags Collection by Quin | Printables.com for…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple post stylized in the form of the flag of the Czech Republic. The pendant is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
A simple post stylized in the form of the flag of Ukraine. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Parts Attachment parts At the end of the string you can use the attachment parts to tie is to a wall, string or other object. The attachment parts come in the following shapes: Hook Loop Flat surface for (double sided) tape or glue…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Part These splitters can be combined with Party Flags by Quin | Download free STL model | Printables.com . Printing tips The flag face should be only one layer thick, so make sure your first layer prints well. The models work best with a…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple post stylized in the form of the flag of Poland. The pendant is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in sequence:…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
A simple post stylized in the form of the flag of the Netherlands. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
I like cramming as many as I can fit on the plate with small prints.
Wydruk około 4,90 €–5,99 € nettoWstępna wycena jednego wariantu
Simple patch stylized in the form of the flag of Poland. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in sequence: 0.0 -…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Parts Door Clips Use these parts to attach a string of party flags to a door. There are two shapes available for different door types, one for doors with a flat top surface, and one for doors with a step in the top surface. Printing tips…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple patch stylized in the form of the flag of the Netherlands. The patch is designed for colour printing in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
A simple 9mm chamber flag for chamber flagging purposes. Print bullet tip up with high or 100% infill at least up to the arm since it needs as much plastic as possible so it doesn't compress or get crushed. These were made to be able to…
So you like Rising Sun Board Game? Do you think too that cardboard strongholds, turtles suck? Print this kickstarter-like-ish addons for your Rising Sun game! Turtle has been remixed from Snapping Turtle by xinghcy0311
Created some scoring flags for carcassonne meeples. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: DasFilament PETG/PLA Various Notes: Print with 1 perimeter to…
Raise your own Mario flag, or one of the other four flags, with this mechanical model. Twist the gear in the back to raise and lower the flag. There are five interchangeable flags: Mario flag Luigi flag Bowser flag Toad flag Toadette flag…
In Dorfromantik, some tiles have printed flags and must be taken into account during the game and in the final scoring. These flag figures make it easier to see the flags. We play it so that we place the flag as long as it is not yet…
Feel free to buy me a pizza if you want. Contributions appreciated but never expected. Love the original flags but it bothered me that the numbers were backward for the opposite side so I created these flags with the score on both sides.
Included is a two piece case for an 8x8 WS2812B LED matrix. I use this wired up into an Arduino Uno connected via USB to my PC and controlled with SimHub. Materials Here is the exact 8x8 LED matrix I bought from amazon: 8x8 LED WS2812B…
The goal here was to design a way to add an activate carbon filter to K1 exhaust fan. I've researched for an specific filter for this application, and found that Anycubic has one for this specific use. So, it was designed to use this…
These are 3D-printable shotgun chamber flags that fit directly into the chamber and stick a big bright plate out the side so it’s obvious the gun is clear and unloaded. I’ve included models for: 10 gauge 12 gauge 16 gauge 20 gauge 28…
Flagship Player model from TI4
This is a tiny 3D-printed add-on for the NexTool Mini Flagship F12 . The stock blade uses a thumb hole , but on this knife it’s honestly not great for one-handed opening. With this part installed, the hole basically turns into a thumb…
Parts These characters can be combined with Party Flags by Quin | Download free STL model | Printables.com , which includes the spacers and attachment parts. This set of characters contains: Letters A to Z Numbers 0 to 9 Symbols @, #, &,…
LED diffuser Matrix 8х8 WS2812 Simple printing from the table upside down. Nozzle 0.5 layer height 0.2
Parts Flags Next to the default triangular flag you can select flags with a cutout: Heart Star Baby Feet House Four Leaf Clover Wedding Rings Printing tips The flag face should be only one layer thick, so make sure your first layer prints…
Wanted a simple yet easily identifiable office status without having to get within 5 feet to read. And thought of the doctors office where they have colored flags to give patient room status. Put them together and you have this!!…
Czech Republic, Slovakia, Italy, France, Belgium, Ireland, Romania, Portugal, Switzerland, Spain, Denmark, Sweden, Finland, Iceland, Norway, Netherlands, Germany, Hungary, Bulgaria, Estonia, Lithuania, Scotland, Croatia, England
I printed in PETG at 100 fill% in orange. These have enough lip, like a shell, that if the slide is racked quickly, ejects like a shell, letting a round from the magazine load. So far the lips have held up, but I expect them to fail…
We wanted to do some flags with strings and thought we should make a start, so here are String Flags! Choosing A File This table shows you which countries flags are supported, and which file you should choose for each supported country!…
This is a late medieval-style plaque belt designed to be easy to FDM print, easy to customize, and easy to affix to any kind of backing. It can be used with the generic plaques or with specific plaques and colors and numbers to indicate…
This is a mailbox flag system with multiple flags for different holidays and decors. Halloween, Christmas, and Fleur de Lis Flags are available so far, hopefully with more to come. There are two versions of the mount; Version 1: the…
024-2-horizantal-band-flag*.stl: Can be used for countries like Indonesia, Poland, Ukraine etc 003-3-vertical-band*.stl: Can be used for countries like Ireland, Germany, Belgium, Nigeria etc 003-cross-flag*.stl: Can be used for countries…
reduced size of original for smaller led matrix
Wavy versions of the Israel and USA flags crossed together. Aspect ratio is 1.6375, which is the average of Israel's 1.375 and USA's 1.9. The poles extend into the center of the flag area to improve structural integrity. The model is…
The pawns that come with the game were not so exciting, so I made some flags instead. In the rules you are supposed to have nine flags to fight over, but I printed two sets of five flags instead so that you would mark you won columns by…
A flat-packed sentinel to lay in wait in any dungeon or cobbled path! Based on art by Lief Jones & concept by Scott Green Scaled to fit on a Large creature base (not included). If you like this model a whole lot and want to thank me, you…
These are "Lithophane" models of the nation flags from the Square-Enix mmorpg Final Fantasy XI. They are 100mm on a side and 5mm tall. Currently I have models for Windurst, San d'Oria and Bastok. I hope to do more in the future. Please…
Show your humanitarian support for the innocent civilians caught up in the current 2023 Middle East conflict, no matter where they call home, with these LED Lightbox flags. Includes: United Nations Flag Israel Flag Palestine Flag…
This simple 3d print allows easier ceiling mount for new gen Ubiquity Unifi Wifi access points like the U7 Pro Compatibility E7 U7-Pro U7-Pro-Max U6-Enterprise U6-Pro U6-LR UAP-AC-Pro UAP-AC-HD UAP-AC-SHD UAP-XG Using m3 heatset insets…
Flagstone tile set for Dungeons & Dragons. Includes: 4 x 1x2 Tile 8 x 2x2 Tile 1x Door Front 1 x Back 7 x Stair Pieces
One of the most annoying things (and somewhat dangerous) when camping is tripping over the stake lines at night. Add these reflective flags to any stake line, whether for a tent, a tarp or canopy and it will pop out with even the littlest…
The simple flags designed by NdotCAD . Countries: Japan, Korea, China, England, United States, Canada You can remix the model at this site bellow. https://app.ndotcad.com/en/community/article/KzLQDX9o8w6rd2NpURENKy
Takes about 18 minutes to print. Ever wake up in the morning and see an empty dog dish and think, “I wonder if anyone's fed Duke yet?”. Unfortunately the person who would fed the dog has rushed to work, and there's no telling weather or…
This sheath fits snugly in a horizontal position on belts up to 40mm wide (or smaller). The horizontal orientation ensures that when sitting or moving, the bulky multitool stays out of the way and doesn’t bump against your legs. The clip…
These banners are based on a design by GWGumby , but decorated, and improved for multi-color printing. The most noticeable changes are the thinner banner, and the border around the banner. You can choose to print the border in a different…
This are for vibration dampening. You can mount them with adhesive tape on the back side of your flagstone or concrete slab. Settings: Infill: 30% Grid Supports: Yes Material: PETG / PLA Hint: print on the sqare side with supports
These will likely go through some iterations, but I wanted a simple checkpoint flag for RoboRally that didn't block the tile it sat on.
The Six Flags New Orleans Amusement Park permanently closed in 2005 due to flooding and damage sustained during Hurricane Katrina in 2005. The entrance sign became infamous as it was frozen in time, reading "CLOSED FOR STORM" for almost…
I needed some indicators for the 10mm rebar temporarly sticking out of the ground Designed some simple flags with low material consumption and fast printing. the inside is more 11.3mm than 10mm as the rebar diameter is for the main body,…
I redesigned the cart picket fence flags for my carts. They are cheap, easy to make, and work well! You can use any type you want, and especially have students measure the flags and set up the photogates themselves. These are also a great…
Sometimes a simple flag is all you need. FlagStick is a compact, adhesive-mountable status indicator you can stick just about anywhere—lab doors, pet gates, tool benches, or anywhere else a quick visual cue helps. The design uses three…
Checkered cross /flags 3 color Category: Automotive
We had trouble keeping the Z Cam E2 Flagship Lens Mount's sensor free from debris and damage, so this protective cover was designed to keep it covered when not in use. Keep in mind this protective cover can make contact with the the…
A flagholder for 5 flags with 10 mm pole
Discover a wide selection of mini and tiny tank models, each featuring a unique flag design for added character and customization. These compact prints are optimized for speed and efficiency, making them perfect for quick projects, themed…
Overview These printable WAGO label flags are designed to make electrical work and cable organization easier and cleaner. They are a simple, fully 3D-printable way to label your WAGO 221 connectors — ideal for workshops, makers, and…
All pieces print support free, in the orientation you download them in. The base piece is the same regardless of what the flag is, so print one of those. There are two options for the border/frame. Either print 2 of the border_half files…
Flags for dice tower including Penn State, Steelers, Notre Dame, and Yankees Printed in PLA, dice tower source: https://www.thingiverse.com/thing:1276711/makes
Extra flags that can be printed and glued. Mmu and .25 nozzle to reach best detail.
Safety flag in three variants Two for .22 and one for .177 / 4.5 mm. "Bechriftungsfahne_FP" and "Stopfen_FP" belong together. The labeling on "Bechriftungsfahne_FP" should be made more visible by a color change. You can still make out the…
Add country flags to your MOLLE / PALS system on your backpack. This includes 2 color horizontal and vertical, for example Ukraine and Poland. 3 color horizontal and vertical, like Netherlands, Germany, France, Italy, Estonia, Lithuania,…
As I had to put my spools in a specific arrangement I needed to keep overview over who is who. Working with MMUs (in my case MMU2s and MMU3, there is a lot of rolls engaged when every machine is under full steam. The more important is it…
The holders use 2 screws to hold it down. If it doesnt fit, just size it up or down in your slicer of choice. One tip: put the holders on you flag, and then screw them down. This way, you can be sure the holders are alligned.
A set of 3D‑printable world flags, based on SVG flag sources and prepared for reliable multi‑color printing. Each flag is split into clean, stacked color layers so you can print vibrant, accurate flags with controlled color changes.…
A set of flagstones I made for fairy house veneer and paths. I print sets and adjust the x or y axis to make more variation.
Cord wrap-holder with optional retainer clip for a new 2024 ReqTeq Flagship 1100. not sure if it will fit or work on different models or years for ReqTeq pellet grills , mine is brand new as of 2024 and it fits mine . The retainer clip…
Combine this quick print with a cocktail stick, some glue, and a paper flag. Stick up to six of them in your tildagon, you didn't need those slots anyway. You will have the fanciest EMF camp badge ever. Now that's what I call macaroni!…
this a magnet that based on Keep calm meme you need 3mm 1mm magnets you need put 12 3mm x 1mm magnets help you personalize your theme park fandom or looking for a cheesy joke heres the link for magnets.…
FRC Battery flags compatible with my FRC Battery autoconnect system Onshape link: https://cad.onshape.com/documents/2953e92328aa90e7fc1d5463/w/cd3960a58976c716de9c0981/e/d990decdbeefe09652e1470d I printed these with cc3d rigid tpu for the…
I wanted to make some pride magnets and here they are! Technically those models can be used to make any flag. Holes' on back of the magnets diameter is 8mm - optimal size for 7mm small round magnets Holes are 0,5mm deep - just to mark…
Inspired by a sculpture in a local park by Arie Berkulin, I made this “vlaggen” or “flags” sculpture model. There is a flat surface on the bottom, but angled. So I suggest placing the model by face and selecting one of the bottom…
Digits - number flags into 2020 extrusion profile. Usable as INBXX spool labels.
I have 3 Spy Video Trakr's outfitted with GoPro cameras, Li-Ion batteries and new 3D-printed tracks. I'll be creating videos, choreographing moves between all three. I needed a way to keep track of which controller goes with which device.…
I've had a particularly troublesome year with mice making homes where they aren't welcome including my Recteq 1100. So I made plugs for all the holes and a cap for the chimney. The chimney cap is two pieces so that is seals tightly around…
This upload contains fan-made functional replacement flags for the original Dark Tower board game. They are intended for repair and restoration of broken or missing flags commonly found on original sets. No artwork, logos, or symbols are…
These flags are designed to help stop robotic lawn mowers from trying to climb over low trampoline legs. They create a taller, more obvious obstacle that is easier for the mower to detect before reaching the horizontal frame. They were…
What it is Each flag pairs a full-length dummy round, modeled on the real cartridge outline, with a bright hex tag that sits outside the ejection port. Drop one in and everyone on the line can see at a glance that the chamber is empty and…
This is quite specific to the following products: Post-it Flags, 80/On-The-Go Dispenser, 1 in Wide, Assorted Primary Colors (680-RYGB2) https://www.amazon.com/Post-Colors-94-Dispenser-Dispensers-680-RYGB2/dp/B001PMGD4Y Magnets: “8x3mm”…
The design of the flags follows the Olympics, where they are on a standardised shape of a 2:3 ratio This requires Multicolour! Colours needed: Blue, yellow This model is split into components for easy colour slicing. Backing - Any colour…
I am creating a slew of files to organize and play "Ultimate Robo Rally" and these are some flags design I made that are nice but are no the ones I settled on. 1994, 1995 Flag Token Clamshell: In the early versions of the game they gave…
Additional "main" pieces of my tracks lightboxes. Assembly and materials remain the same as the original filesets. Feel free to make for a friend and charge for materials, do not sell these models commercially.
I bought a Electra Glide with initials painted on the back of the saddle bags. I printed these to cover them. They could be used to cover damage. Scale the model to your needs.
End the guessing game behind the TV, desk or router: clip a flag label onto each cable near the plug. The C-clip snaps on and off, and the raised lettering is easy to read. DETAILS • Eight labels in the files: TV, ROUTER, PC, SPEAKERS,…
Pennant flags with raised letters and a raised border, one flag per letter, that spell out your message on a string or ribbon. MERRY XMAS by default; type HAPPY BIRTHDAY, HALLOWEEN, WELCOME HOME, a name or anything else in the Customizer…
I have made some wavy flags with Feelgood messages in 3D text. To be used with and held by your favorite figurine of choice. I first made the Happy Birthday Flag for my son on his Birthday. I have printed them with a 0,4 mm Nozzle in…
Guide Rod Covers with Flags - Remix This is a remix of... ELEGOO CENTAURI CARBON Z ROD SHAFT HOLE COVER ...posted by mikemakesthings on October 09, 2025 at... https://www.thingiverse.com/thing:7166970 The Elegoo Centauri Carbon printer,…
