Wyniki wyszukiwania: forks

Sortowanie

112 modeli

P
PrintablesTheDIYGuy999

Pallet Forks Lifter for OpenRC Tractor

It is a really simple design and based on the original from DELEKS. The original Fusion 360 project is included as well as STEP data, which can be used directly in Prusa Slicer. All parts are printed in ESUN PLA+ with 0.15 layer…

Pobrania
353
Polubienia
55
Ocena
5
P
Printables3DPrinz

Forklift Forks Replacement for Bruder Linde Toy

Small and quick Replacement Print for broken Forklift Forks Printed with PLA and 15% Infill

Pobrania
321
Polubienia
36
Ocena
5
P
Printablescourroux

More Skadis Universal Forks

More sizes of fork hooks for the IKEA Skadis universal hook system by CSD_Salzburg.

Pobrania
315
Polubienia
75
Ocena
5
P
Printablescmh

Adapter for standard hubs on RockShox Torque Cap forks

Pretty much a straight-up copy of the Newmen TC adapter because that's the simplest, most elegant solution that I've seen. In fact, the Newmen adapter is inexpensive and such a nice fix I'd suggest you just buy it from them and give them…

Pobrania
298
Polubienia
22
Ocena
0
P
PrintablesKiko64

26/32mm flat socket for Fox forks

Simple Fox Fork Topcap Socket, 26 and 32mm, flat bottom, ½" drive. Be aware that the topcap should be tightened to 25Nm and some 3D printed plastics may fail at that torque I printed it in Ankun PLA+, since PETG Did not work.

Pobrania
275
Polubienia
11
Ocena
0
P
PrintablesGuschtl

APPLE AirTag Bracket Ø34 mm for MTB forks

Bracket Ø34 mm for MTB forks. Easy to remove.

Pobrania
250
Polubienia
70
Ocena
5
P
PrintablesRadim Mach

Pallet forks Bruder manipulator

Jedná se o výměnné příslušenství pro manipulátor BruderToys - Pallet forks (paletovací vidle). Díly boků slepit s panelem. Nezapomenout nasunout vidle :-) Ať slouží.

Pobrania
232
Polubienia
30
Ocena
5
P

Mini Shovel and Forks

I didn’t want to smash my finger into tiny pots and mess up the roots…problem solved! This prints well fast. I printed at a max speed of 120 mm/s and 0.2 layer height.

Pobrania
227
Polubienia
38
Ocena
5
P
Printablescmh

Bolt on Torque Cap adapter for Rock Shox forks

If your RockShox fork has the cutout for the “Torque Cap” hubs, but you have standard hubs, it can be tough to line up the front wheel with the thru-axle. Originally this could be fixed with the original design which had to be glued in…

Pobrania
217
Polubienia
32
Ocena
5
P
PrintablesJCJ

AirTag holder for RockShox forks

Printed with PETG, 15% Infill. No Support. You'll also need an M6 socket head cap screw and an M6 nut. Consider decreasing the layer height on the top section of the AirTag bracket model. The walls in that area are relatively thin, which…

Pobrania
198
Polubienia
22
Ocena
4,33
P
PrintablesPrint2Win

Crown Race Setting Tool for Tapered Forks

I recently designed this Crown Race Setting Tool for seating the Crown Race on my Fox 34 Suspension Fork by forcing it into place with a rubber mallet. The Tool provides a total operation height up to 190mm. Make sure to print it with the…

Pobrania
152
Polubienia
10
Ocena
5
P
Printablescmh

Crush washer for bicycle suspension forks with 8mm shaft

Replacement crush washer for suspension forks with an 8mm shaft - this is most 32mm RockShox and Fox forks. Sized so that it will print with four walls on a Prusa Mk3 with a 0.4mm nozzle - the 1.67mm thickness was suggested by…

Pobrania
150
Polubienia
16
Ocena
5
P
Printablescrumps

Trials Bike Number Plate - Modern Paioli Forks

This number plate covers the control cables and wiring between triple clamps on a Trials bike. Dimensions are based on my 2000 Sherco 2.9, but it may fit others. Printed in PLA, the picture here shows it bare, right off the printer. I…

Pobrania
149
Polubienia
11
Ocena
0
P
Printablescmh

Lower crown race for 1.5" tapered forks

Update: This has been the only crown race on both of my mountain bikes for about a year now and one has been on one of my wife's bikes for the past several months. It works. Saw the 1 1/8" lower crown race design by Jacques Dugal (…

Pobrania
132
Polubienia
20
Ocena
0
P
PrintablesSerentos

Forks Knives Spoons Utensil Holder

Two tones because I ran out of filament mid print… tired of using cups that would get knocked over / tip over. should fit on most regular sized printers, might need to print at an angle to fit.

Pobrania
119
Polubienia
19
Ocena
0
P
Printablesuser163826

dh forks

fork extension

Pobrania
116
Polubienia
2
Ocena
0
P
PrintablesMetamere

Ben's Burly 3-Bolt Cage Mount For MTB Suspension Forks

The goal of this design was to make a 3-bolt water bottle/bikepacking cage mount that could be secured to the 43mm diameter lower tubes of my mountain bikes' suspension forks. I wanted it to be a very secure fit, strong, lightweight,…

Pobrania
106
Polubienia
33
Ocena
0

Under Desk Drawer for spoons and forks

Under Desk Drawer for spoons and forks. In my version, the drawers are deeper, longer and narrower.

Pobrania
96
Polubienia
16
Ocena
0
P
PrintablesVickash

3D Printed RC Forklift - Improved Carriage & Forks

Added mounting points ( 2 pcs 2.6x6mm screws required) to secure the forks to the bottom of the carriage. This is less "realistic", but saves you from having to adjust them when they get tilted during use. Removed vertical bar pattern…

Pobrania
94
Polubienia
11
Ocena
0
P
PrintablesThe Mabur

Forks salad

The Forks for Your salad. Print instructions Material :PLA Resolution: 0,1 Infill: 10-15% No Support

Pobrania
94
Polubienia
15
Ocena
5
P
PrintablesDuboaa

Action cam holder for bike forks

This is an action cam holder, compatible with GoPro type mounts, for bikes forks (diameter of 42.2mm). Because your cam needs then to rotated, I included the platform with 4 positions. Easy mounting with the knobs on pivot. The screws…

Pobrania
91
Polubienia
22
Ocena
0
P
PrintablesCiba

Paletové vidle 1:43 pallet forks

Paletové vidle pro modely měřítka 1:43

Pobrania
88
Polubienia
8
Ocena
0
P
PrintablesMiles

~5cc Volume Spacer for Fox Suspension Forks

Take suspension tuning to another level with half sized volume spacers. For best results, print it out of PETG or something that can flex a little bit. PLA may be a little too brittle. Print with 100% infill, clip on, have fun. If you are…

Pobrania
86
Polubienia
4
Ocena
5
P
PrintablesDejf

Wooden railway multiforks - Multivýhybky pro dřevěnou vláčkodráhu

Kids wanted some fork that would have out going rails closer together than standard forks put in a row. This is the result, enjoy! As always compatible with every piece of wood in our house … Děcka potřebovala výhybky co by ústily blíž u…

Pobrania
84
Polubienia
24
Ocena
0
P
Printablesslshdot

Threadless Saw Guide for Steerer Forks

Threadless Saw Guide for Steerer Forks This 3D-printable tool is designed to assist in shortening bicycle steerer tubes—whether steel, aluminum, or carbon —inspired by professional cutting guides like the Park Tool SG-6. It provides an…

Pobrania
83
Polubienia
11
Ocena
0
P
Printablessteriku

Bruder Bucket Hinged Forks for Telescopic Loaders

Bucket Hinged Forks for telescopic loaders compatible with Burder part 42145. Works for John Deere and Massy Furguson and probably more Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes…

Pobrania
75
Polubienia
8
Ocena
0
P
Printablescmh

Hex key guide for rebound adjustment knob on Fox Step Cast 32 forks

Guides a long 2mm hex key to make it easier to loosen or tighten the small screw that holds the rebound adjuster knob in place. The Fox Step Cast 32 is a great fork. Rebuilding one it isn't much more difficult than with the standard Fox…

Pobrania
75
Polubienia
6
Ocena
0
P
Printablesmivas

Kitchen basket for spoons, forks and knives

Kitchen basket for spoons, forks and knives. Basket size: 130x130x130mm. Print in place no support needed.

Pobrania
74
Polubienia
15
Ocena
0
P
PrintablesYuwi

Ø32 mm AirTag Mount for MTB forks

Friction fit Apple AirTag holder for 32mm forks. THE FIT IS TIGHT, TAKES A LOT OF EFFORT TO PRESS THE AIRTAG BASE ONTO THE 3D PRINT, YOUR PRINTER -MUST- BE DIALED IN CORRECTLY. 100 Hours of riding and still holding strong. Can be easily…

Pobrania
73
Polubienia
5
Ocena
0
P
PrintablesDragonator

Heel forks for CSM

Heel forks, or heel hooks for a circular knitting machine. These tools are used to add weight in specific places of the sock while knitting a heel, to keep the correct tension. The fork is a single piece that can be printed without…

Pobrania
72
Polubienia
17
Ocena
0
P
PrintablesPunkgeek

Ortlieb Fork-Pack adapter for various forks

The Ortlieb bag is slick but the mounting bracket assumes three M5 holes in the fork, spaced 64mm apart. Unfortunately my Specialized fork had only two holes, 155mm apart. So I made this adapter to let you mount to the two existing holes.…

Pobrania
70
Polubienia
12
Ocena
4
P
PrintablesRick100

Radio Controlled Guido Forklift From Cars With Working Forks

Youtube demo link: https://youtu.be/phE24J7kQrQ?si=WOx-oIXxJhKfpGu_ Youtube build link: https://youtu.be/Xqmj-n5zHR4?si=U1yKhIICVGpWdTdb This is my radio controlled Guido the forklift from the movie Cars. It has working forks. It uses 3…

Pobrania
67
Polubienia
20
Ocena
0
P
Printableswrcrooks

Fabric Pleating Forks

If you like this model, please consider a donation: Buy me a coffee link

Pobrania
63
Polubienia
9
Ocena
0
P
Printablesthall72

Lego Compatible (45707.dat) Forklift Forks 4 x 7

This model is compatible with the lego system.

Pobrania
62
Polubienia
15
Ocena
5
P
PrintablesOdd Inventor

Vector Forks and Pallet

Imported From Thingiverse: A Fork and Pallet attachment for Vector Robot, also compatible with Cozmo If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…

Pobrania
62
Polubienia
4
Ocena
5
P
PrintablesFred.call

Mountain bike forks protector suntour xcr 120mm

Just a forks protector for my bike rockrider 540 with suntour sxr 120mm Category: Sport & Outdoors

Pobrania
59
Polubienia
12
Ocena
0
P
Printablesathome128

28.6mm Carbon Steerer Tube Cutting Guide Jig – 3D Printable Saw Guide for 1 1/8" Forks

Carbon Steerer Tube Cutting Guide (28.6 mm) This simple 3D printable guide helps you cut 28.6 mm carbon steerer tubes straight and accurately. It aligns your saw blade and keeps the cut square, which is especially helpful when shortening…

Pobrania
57
Polubienia
5
Ocena
5
P
PrintablesMavericK96

Rokenbok Forklift Forks and Mount

This is a replacement for the Rokenbok forklifts - designed similar to the original but simplified and made easier to 3D print. The forks are basically identical, the mount is modified to have thicker parts and without the weird Rok clip…

Pobrania
57
Polubienia
3
Ocena
0
P
Printablesthall72

Lego Compatible (4517.dat) Forklift Forks 4 x 6

This model is compatible with the lego system.

Pobrania
55
Polubienia
15
Ocena
0
P
PrintablesDendy

SAW GUIDE FOR CARBON COMPOSITE FORKS

This model is copy of Park tools overpriced saw cutting guide. There is main M8 bolt for tighting down the tube (You can use any M8 bolt you want if you dont trust plastic bolts just dont puncture your carbon tube :D). To connect Part 1…

Pobrania
54
Polubienia
5
Ocena
0
P
Printablesvimafeje

vertical organizer for forks, knives and spoons

This is a vertical organizer for forks, knives and spoons, so you can store the cutlery on the cabinet door and free up, use it and abuse, just keep your kitchen clean a a safe space, your wife will apreciate it!!!! There are two…

Pobrania
54
Polubienia
11
Ocena
0
P
PrintablesNina Máčová

Lucet forks for knitting

Simple hand tools that are used to make cord from yarn. Vidličky na výrobu tkaniček a náramků - tradiční nástroj pro zábavné tvoření s dětmi

Pobrania
53
Polubienia
18
Ocena
0
P
Printablessparkyspark

Adjustable Pallet Forks

Adjustable Pallet Forks Included are various fork lengths, and the step file is anyone would like to make there own length.

Pobrania
53
Polubienia
3
Ocena
0
P
PrintablesGiannisTDM

10mm hex to 24mm socket for servicing forks, rockshox and fox and installing cassettes.

Should not be used to fully tighten on forks that have a direct 24mm 'bolt' on the top, Should be fine on forks that use a cassette tool, my cassette tool had a 24mm ‘bolt’ on top. This should be used to aid in damper, airspring or…

Pobrania
50
Polubienia
3
Ocena
0
P
PrintablesTheSlowPrinter

Not so minimalistic cargo holder for MTB forks

As we are heading for a one week bike trip, we wanted to have a place to pack our bulky but lightweight stuff like sleeping bags and inflatable mats. This leafs much more space in our bike trailer for other stuff, which is nice. :) I got…

Pobrania
47
Polubienia
14
Ocena
0
P
PrintablesFred.call

Suzuki SV650 front forks ring

suzuki sv650 front forks ring, thay are aesthetic and protect the front of the forks I recommande to made them with PETG filament Category: Automotive

Pobrania
44
Polubienia
6
Ocena
0
P
PrintablesRubenSeiffert

Inserttool for Forkseals 41mm Suzuki DR650

Diese Einschlaghilfe habe ich für die 41mm Federgabeln der Suzuki DR650 konstruiert. Sie kann natürlich auch für andere Hersteller und Modelle mit 41mm Gabelrohren verwendet werden. Ich empfehle es aus einem stabilen Material wie ABS/ASA…

Pobrania
43
Polubienia
10
Ocena
0
P
PrintablesEdward

Forks for Model Bikes

I made this for a RC motorcycle I am working on. You might need to cut/sand some parts if they do not fit.

Pobrania
43
Polubienia
2
Ocena
0
P
Printablestomtom7

Rebound knob for Marzocchi forks

Use with original hexagonal rod. Use PETG, ASA, Nylon…

Pobrania
43
Polubienia
2
Ocena
0
P
Printablessroka_p

Guide Protector Forks, Suzuki RM 250/125

Suzuki rm 250 guide protector. Print with PETG, Its available to install without forks disassembly. Heat it in one point with heat gun, next expand, fast mount and tight it. For print right and left just mirror it.

Pobrania
40
Polubienia
5
Ocena
0
P
PrintablesDDW

Playmobil tractor front loader pallet forks

printed in PETG 3 walls myself. clicks over and onto the existing loader front

Pobrania
36
Polubienia
14
Ocena
0
P
PrintablesCEPP

Front Reflector for Speedforks

Front Reflector for Speedforks Version 1 : Designed for a wire that exits through the center of the axle. Version 2 : Designed for a wire that exits to the side of the axle. The reflector component can be sourced from AliExpress by…

Pobrania
34
Polubienia
7
Ocena
0
P
PrintablesM6 robotics

force knight alternate forks

These forks are longer than the forks in the original force knight file. I found these to be a lot more effective than original ones. I would recommend using them against bots that have a wedge or any bot with low ground clearance. This…

Pobrania
34
Polubienia
1
Ocena
5
P
Printablesnhadler

Baratza Forte/Vario Dosing Cup Forks

This replaces the portafilter forks in a Baratza Forte or Vario. Since it holds the cup flush to the exit shoot, it makes minor mess and lets you easily transfer to your portafilter. This is designed to fit these style generic cups.

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesSaad Caffeine

handle for spoons, forks, utensils or flatware

flexible handle to suit various grip patterns, assistive or otherwise. added a flexure pocket to allow for metal spoons to be inserted.

Pobrania
29
Polubienia
11
Ocena
0
P
Printablessteve

Forks for toy jd skid steer

I will up load a adper to fit this specific toy that glue onto the back of forks but if want you make your own adapter to fit a different model print pla + or petg

Pobrania
28
Polubienia
4
Ocena
0

forks animals kids

It is a small set of forks that I designed so that my daughter can eat her fruit without the risk of getting punctured.

Pobrania
28
Polubienia
5
Ocena
0
P
PrintablesBorlang Customs

1/64 scale CAT skidsteer bale forks

Custom made and 3d printed by me.

Pobrania
27
Polubienia
4
Ocena
0
P
Printablesemmemodeling

Bon Appétit - Elegant Cutlery Holder for Forks, Knives, and Spoons

Bring style and organization to your table with the Bon Appétit cutlery holder! This refined and functional design is crafted to hold forks, knives, and spoons, keeping them tidy and ready for use. Perfect for restaurants, formal dinners,…

Pobrania
26
Polubienia
7
Ocena
0
P
Printableskev

Rokenbok Transgripper Forks

The Rokenbok Transgripper is one of the more unique vehicles in the line up due to its transverse clamping forks. On the earlier models these forks were permanently attached, and once broken you are out of luck. At some point the forks…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesGoldenBoyGarage

Motorcycle Brake Line Holder for 50mm forks

Had custom stainless lines made for my vintage Kawasaki H1 500, along with different brakes that use a traditional banjo. Several ideas for keeping the line close, but this seemed fun to make. Updated this model. Marked it as V2, but it…

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesJChris...

Filamatrix Stealthburner Rear for Rapido V2 UHF with Mounting Eyes instead of forks

This is a modded SB Rapido Rear for a Carto/CNC Metal Bracket for VORON 2.4/Trident. I have removed the mounting slots and added eyes to the body. Now, when you are working on the toolhead, the SB assembly can not accidentally fall from…

Pobrania
25
Polubienia
7
Ocena
0
P
PrintablesTarik424

Forklift Attachment w/ adjustable forks for Professor Boots V2 RC Excavator

These are upscaled and updated to fit the larger excavator.

Pobrania
25
Polubienia
17
Ocena
0
P
PrintablesCLIXZY

Moto suspension forks boots-socks shields cover clamp

Motorcycle boots don't allow thestock shields to be fitted, and the rubber over aluminum seems like a too basic setup. This can be used not only with boots but also for normal fork bushings protection, especially the tall one, in case the…

Pobrania
23
Polubienia
8
Ocena
0

Forks & Spoons Holder

Extra space to store cutlery

Pobrania
23
Polubienia
4
Ocena
0
P
PrintablesDa Sym

Fox Mudguard Mount for Non-Factory Spec Forks

Fox mudguards mount to the arch and the lower leg bleed ports. Only the factory forks have these bleed ports but all forks have the fastener holes in the arch. I made these standoffs to zip tie to your lower leg with the mud guard to hold…

Pobrania
22
Polubienia
6
Ocena
0
P
PrintablesGoldenBoyGarage

Motorcyle Headlight Bracket for 32mm Forks KLX DRZ 125

About We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesGOOSE

Forks And Pallet For Bruda Tractors

Print at 60% infil Any Colours works I found Pla is a bit weak so i would try to print it with something stronger like PETG or Carbon Fiber Sorry For No photo Of The Pallet, cant find it smh

Pobrania
21
Polubienia
2
Ocena
0
P
Printablesgutegeschmack

Blinkermount for 41mm Motorbike Forks

Use 4x M3 bolts. Duplicate and mirror the part in the slicer so the cable routing goes to the upside on both sides. Blinkerbase is 15mm, .f3d added if you need to adjust to fit your blinker.

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesDavid Cisneros

Hammer XT detachable Forks

Hammer XT detachable Forks I designed this for my self but if someone is looking for something similar well here you go. this is made to work with the Hammer XT by simple shot. It is not a full sling shot Print Setting: 100% infill Print…

Pobrania
19
Polubienia
0
Ocena
0

Tray insert for little Spoons and Forks

An insert for the tray for little Spoon and Forks. Its a bit higher, so Kids can get to the Spoon and Forks.

Pobrania
18
Polubienia
4
Ocena
0
P
PrintablesRob K

Speedometer Gauge Panel for Honda CB550 with 99-02' R6 Forks

This a speedo mount to fit on a an R6 Forks. I believe this would fit on a R1 and similar years too. The boss for the ignition key has been cut off to fit this. This fits a 85mm or 3 3/8" Gauge, the one I specifically have is a “Motor…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesLuqa

Small ground forks

A small ground forks that can be used to mix soil for transplanting or in your home composter.

Pobrania
16
Polubienia
0
Ocena
0
P

toyota forklift forks (forks attachment, non adjustable)

For a training tool on how to carry a load on a forklift. Toyota forklift forks (forks attachment, not adjustable). I don't think anyone needs it for this training tool, but if you want a paper weight and work at a forklift dealer it…

Pobrania
13
Polubienia
8
Ocena
0
P

Space Forks - Maximise the Cutlery Organiser w/ 3D Printing!

This adjustable-width bamboo cutlery organiser is sold under multiple brand names, but is fairly commonplace. This model permanently keeps it open to the maximum width, and hardly noticeable when inside a drawer. Make sure to print it…

Pobrania
13
Polubienia
6
Ocena
0
P
PrintablesZambumon

Switch Plate Support Forks & Switch Pushers

Aid tools for mechanical keyboard assembly. The forks are inserted between the plate and the circuit board and ease the building process by keeping the gap between these two components consistent. The switch pushers protect your…

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesGlenn Brockett

Holder for meditation tuning forks.

This is designed to hold a meditation tuning fork set with a shaft diameter of about 8 mm, with the hammer about 10 mm. A standard hockey puck fits in the center (an excellent strike face for the tuning force.) Mine is printed in…

Pobrania
11
Polubienia
2
Ocena
0
P
Printablesevee

wheel loder forks

shrinks by 1mm

Pobrania
11
Polubienia
0
Ocena
0
P
Printablesispont

Combat Robot Forks

I recommend printing on the side which faces the floor. These forks were designed to fit with the Plifter by Burnout but could be used for anything you need.

Pobrania
8
Polubienia
5
Ocena
0
P
PrintablesToleranceStack

Motorcycle Turn Signal Clamp for 33mm Forks

I made this fork clamp because I needed a clean way to mount turn signals on my old KZ440 and couldn't find a good option. The available commercial parts were either inexpensive-looking universal clamps or more premium options that were…

Pobrania
8
Polubienia
0
Ocena
0
P
Printablessir spont

Combat Robot Forks 3.0

No supports, Recommended at 100% infill.

Pobrania
7
Polubienia
3
Ocena
0
P
PrintablesMichael_

Apex Premier Forks

This model is a pair of extra forks that can be use for all types of battlebots! I would recommend it for a Beetleweight

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesSpecter

BladeHQ - "Zero Forks Given" Plate

"If you’re part of the knife world, you’ve probably seen "Zero Forks Given" knives, stickers, or patches from Blade HQ floating around. Maybe you’ve wondered: Why forks? Why now? ...A movement full of fork-hating satire that flies under…

Pobrania
5
Polubienia
2
Ocena
0
P
Printablesmarvmilo

Granite Stash RT Adapter for Straight 1-1/8" Forks (with Drainage)

Overview I designed this small adapter to make the Granite Stash RT ( https://granite-design.com/en-de/products/stash-rt ) tool fit inside a straight 1-1/8" fork steerer . The original Stash RT is made for tapered steerers (1-1/8" to…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesGrogg3D

Sino Heavy Forklift Toy Forks

My son's Sino Heavy Forklift Toy's forks broke, the centre spindle rod snapped and the forks were able to work themselves off. I based these replacements on the originals with some key changes: 2 variants: Original & LevelOff (this…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesIvan Urbánek

Aluminium steerer bonded insert for carbon forks

This is aluminium steerer insert for carbon forks. It can be used for repair of lightly damaged fork steerer or increasing safety on a new fork. Do not even think about using it printed, even from PEEK. You have to have it machined. I do…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesMARGRAF ITALY

BowSpan - Flat Ribbon Bow Forks | 40, 60 & 80 mm

BowSpan is a set of three flat, open-ended forks for arranging ribbon loops and tying their centre with a separate narrow ribbon or cord. The long handle keeps the working area clear, and the open slot provides access to the centre of the…

Pobrania
1
Polubienia
0
Ocena
0
P
Printableskev

Rokenbok Replacement Forklift Forks

My own spin on the Rokenbok Forklift Face and Forks. I never understood why Rokenbok called it the forklift face, it's a carriage. Forklift carriage. Ugh. All models are interchangeable with their OG Rokenbok counterparts. The Face has…

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

force knight alternate forks

These forks are longer than the forks in the original force knight file. I found these to be a lot more effective than original ones. I would recommend using them against bots that have a wedge or any bot with low ground clearance. This…

P
Printables

Playmobil tractor front loader pallet forks

printed in PETG 3 walls myself. clicks over and onto the existing loader front

P
Printables

~5cc Volume Spacer for Fox Suspension Forks

Take suspension tuning to another level with half sized volume spacers. For best results, print it out of PETG or something that can flex a little bit. PLA may be a little too brittle. Print with 100% infill, clip on, have fun. If you are…

P
Printables

Sino Heavy Forklift Toy Forks

My son's Sino Heavy Forklift Toy's forks broke, the centre spindle rod snapped and the forks were able to work themselves off. I based these replacements on the originals with some key changes: 2 variants: Original & LevelOff (this…

P
Printables

Holder for meditation tuning forks.

This is designed to hold a meditation tuning fork set with a shaft diameter of about 8 mm, with the hammer about 10 mm. A standard hockey puck fits in the center (an excellent strike face for the tuning force.) Mine is printed in…

P
Printables

BladeHQ - "Zero Forks Given" Plate

"If you’re part of the knife world, you’ve probably seen "Zero Forks Given" knives, stickers, or patches from Blade HQ floating around. Maybe you’ve wondered: Why forks? Why now? ...A movement full of fork-hating satire that flies under…

P
Printables

Motorcyle Headlight Bracket for 32mm Forks KLX DRZ 125

About We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with…

P
Printables

26/32mm flat socket for Fox forks

Simple Fox Fork Topcap Socket, 26 and 32mm, flat bottom, ½" drive. Be aware that the topcap should be tightened to 25Nm and some 3D printed plastics may fail at that torque I printed it in Ankun PLA+, since PETG Did not work.

P
Printables

fender mount for dual mtb forks

fender mount for dual mtb forks

P
Printables

1/64 Scale Pallet Forks

It is a little hard to print, and may take a few tries. My printer is not the best though…

P
Printables

Forks mount

3D printable forks mount for bike.