Wyniki wyszukiwania: g10

Sortowanie

391 modeli

P
PrintablesFloKun

TP-Link TL-SG1008P 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…

Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
414
Polubienia
41
Ocena
5
P
PrintablesCaptainAl

1U TP-Link SG108 (all variants, E or PE) 10" rack mount

There are other suitable designs for TP-Link SG108, but I didn't like them; I designed one in which you can easily slide the switch inside the rackmount. The hooks in the middle tightly fit with the body of the device, and it keeps it in…

Wydruk około 4,12 €–5,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
297
Polubienia
41
Ocena
0
P
PrintablesPandalism

10in Mini Rack Adapter for TP-Link TL-SG108S

Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…

Wydruk około 4,87 €–5,95 € nettoWstępna wycena jednego wariantu

Pobrania
80
Polubienia
14
Ocena
0
P
Printablesmrusk

Flight Simulator G1000 NXI

This Garmin G1000-like Flight Display is the free V1 version of the FlightSimDIY design, as available on the FlightSimDIY Discord . It includes the complete mechanical design of the G1000 NXI Bezel by FlightSimDIY. Some further upgrades…

Pobrania
2184
Polubienia
198
Ocena
5

10" Rack mount for TP-Link TL-SG108PE Switch

This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…

Pobrania
1859
Polubienia
194
Ocena
4,78
P

TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…

Pobrania
1447
Polubienia
108
Ocena
5
P
Printablesowlish

TP-Link TL-SG108/SG608E 10-inch Rack Mount

This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…

Pobrania
1093
Polubienia
102
Ocena
5
P

TP-Link SG1005P | SG105 10-inch Rack Mount

A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…

Pobrania
1089
Polubienia
89
Ocena
5
P
PrintablesCeleste

Celeste's 10" rackmount panel V.1 for TL-SG108

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…

Pobrania
773
Polubienia
114
Ocena
5
P
PrintablesBlenderBender

TP-Link SG105 10 inch rack mount

This is a 10 inch rack mount for a TP-Link SG105. I have printed it whit ABS. No support needed, I have added a custom support in the model. If you need a 10 inch rack mount for a different brand or you just need a cover plate I will…

Pobrania
724
Polubienia
64
Ocena
4,5
P
PrintablesM. H.

TP-Link TL-SG108 8port switch mounting bracket

Simple brackets, takes 4 screws. Mounts the switch upside down and leaves some air through for cooling. Updated with V2 for a nicer printing result, without the elephant's foot through the rounded bracket. It's angled now.

Pobrania
679
Polubienia
68
Ocena
4,7
P
PrintablesBeusekomse Baan

Nederlandse Spoorwegen CHOK - DR G10 Kassel - Spoor 1 - 1:32

After both world wars, a lot of German rolling stock was left behind all over the continent. The Nederlandse Spoorwegen (Dutch state railways) operated several DR G10-Kassel covered goods wagons. They were, amongst others, registered as…

Pobrania
587
Polubienia
41
Ocena
5
P
PrintablesDavisSgt

Fingertip Logitech G102/103/203 mod - Zeromouse inspired

Fingertip mod for Logitech G103/203, inspired by OptimumTech's Zeromouse. Changed some things to allow usage of side buttons, scroll wheel and clamp for strain relief. Total weight is around 40g with PLA. 35g for side-buttonless version…

Pobrania
583
Polubienia
34
Ocena
5
P
Printablescalipsoii

TP-Link 1U rackmount housing for OC200 and TL-SG1005P

Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch. Parts Required This adapter is split into two pieces so that it fits…

Pobrania
555
Polubienia
43
Ocena
5
P
PrintablesKIL0

TP-Link TL-SG105 mount

Mount for TP-Link TL-SG105 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.

Pobrania
534
Polubienia
47
Ocena
4
P
PrintablesKIL0

TP-Link TL-SG108 mount

Mount for TP-Link TL-SG108 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.

Pobrania
524
Polubienia
36
Ocena
4
P
PrintablesBitsAndDroids

G1000 dual encoder caps

Caps made to fit EC11EBB24C03 dual concentric rotary encoders. https://s.click.aliexpress.com/e/_ApgPhJ

Pobrania
513
Polubienia
34
Ocena
3
P
Printablesnerdybrew

10" Rack mount for TP-Link TL-SG108PE Switch no front logo

just removed the front logo because I could not get it to print cleanly.

Pobrania
437
Polubienia
35
Ocena
5
P
PrintablesDiew

10 inch rack TP-Link ER605 - SG108

How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…

Pobrania
416
Polubienia
53
Ocena
5
P
PrintablesDiew

10 inch rack TP-Link SG2210P - SG2008 - SG105-M2

It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…

Pobrania
415
Polubienia
45
Ocena
5
P

TP-Link TL-SG108(PE) | SF1006P 19-inch Rack Mount

A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…

Pobrania
413
Polubienia
42
Ocena
5
P
Printablesandyshinn

TP-Link TP-SG108 Switch Mounting Bracket

A bracket to mount the TP-Link TP-SG108 switch under a table or desk. Use 4 x #8 wood screws. Switch is held into place using bumps on the bracket that fit into the existing switch mounting slots.

Pobrania
403
Polubienia
64
Ocena
5
P
PrintablesCuntan Marius

GBB or SSG10 A3 handle grip

Remix of AR15 grip to fit the GBB or SSG10 a3 handle. Just measure your mount, it should be around 10mm (check the attached picture) Category: Toy & Game Accessories

Pobrania
373
Polubienia
43
Ocena
5
P
PrintablesCeleste

Celeste's sturdy 10" rackmount panel V.2 for TL-SG108 and TL-ER605

Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…

Pobrania
350
Polubienia
21
Ocena
5
P

TP-Link SG1005P | SG-105 19-inch Modular Rack Mount

A modular 19-inch rack mount for the TP-Link SG1005P. Also works with the TL-SG105. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…

Pobrania
327
Polubienia
34
Ocena
5
P
Printablesjnr0790

TP Link TL-SG105 Mounting Plate

This is a remix of this mounting plate by asp55 on Thingiverse. This one has the inserts a bit closer than the original to fit newer TL-SG105 switches. Just use double sided tape or whatever you want to mount the plate and attach the…

Pobrania
320
Polubienia
22
Ocena
5
P

TP-Link TL-SG108S-M2 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG108S-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have added a .3MF project file as well. Do you like my models?…

Pobrania
313
Polubienia
39
Ocena
5
P
PrintablesAngel Rivas

U1 10" Inch Rack Mount for Raspberry Pi 4 and TL-SG105

UPDATE: 25/02/2025 I have updated the design, to compensate for the MicroSD card in the Raspberry Pi, and also adjusted the end of the router back to fix some occasional XYZ errors while printing. U1 10" Raspberry Pi 4 and TL-SG105 Rack…

Pobrania
307
Polubienia
38
Ocena
4
P
Printablesn3bulus

Rack mount for Omada router ER605 & TL-SG108PE

Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…

Pobrania
303
Polubienia
22
Ocena
5
P
PrintablesDanielmaxsteel

TP Link TL-SG105 under desk mount

I designed this holder for mounting the TP-Link SG105 under my height adjustable desk. I used 2xM3 screws with fitting nut and 2x M3,5x16mm wood screws. I placed the nut inside the Screw-Terminals of the switch and fastend the screws…

Pobrania
301
Polubienia
40
Ocena
5
P
PrintablesJascha3D

TP-Link TL-SG105 10-inch Rack Mount

TP-Link TL-SG105 10-inch Rack Mount 🖥 Keep your TP-Link TL-SG105 securely mounted in any standard 10-inch rack! This remix adapts the original 8-port TL-SG108 design to fit the 5-port TL-SG105. It adds a robust latch rather than relying…

Pobrania
295
Polubienia
27
Ocena
0
P
PrintablesReini

TL-SG108E DIN Rail (Hutschienen) Mount (FreeCAD)

The model is a redraw from scratch of the din rail mount part from CrazyIvan359's Orange Pi 4 LTS DIN Mount and added parts to attach a TP-Link TL-SG108E Smart Switch. It is designed with FreeCAD, so you can easy adapt it to your needs.…

Pobrania
285
Polubienia
19
Ocena
5
P
PrintablesBak3

tplink tl-sg105 1U rack shelf

1U rack shelf for 8 port ethernet switch tl-sg105 print settings: 15-20% infill 0.2 layer height

Pobrania
282
Polubienia
50
Ocena
0
P
Printables<Charlie_root>
Pobrania
281
Polubienia
19
Ocena
5
P
PrintablesKemet

Xiaomi Mi Vacuum Cleaner G10 adapter/regular hole/standard hole/baby aspirator adapter/r13mm

Adapter for conversion Xiaomi accessories connector to standard - 26mm diameter (13mm radius) hole. works for Xiaomi Mi Vacuum Cleaner G10 I needed it for baby aspirator. PLA, PET, PETG works just fine. Simple, easy, ready to print.

Pobrania
279
Polubienia
28
Ocena
5
P
PrintablesTdewulf

TP-link TL-SG105 mount

Wall and ceiling mount TP-link TL-SG105 made in thinkercad 3mm thick walls

Pobrania
269
Polubienia
16
Ocena
5
P
Printablesbryanpryor

Bracket for TP-Link TL-SG108 Network Switch

Simple bracket to mount a network switch to a wall or other surface. print 2 brackets, one for front, one for rear. I used #6 screws to mount. Designed in Fusion, parametric model is attached for easy editing to fit your router/switch.

Pobrania
267
Polubienia
37
Ocena
5
P
PrintablesThoreB

10" Switch Rack Mount (TL-SG108PE)

10" Rack Mount Solution (1U) for a TP-Link TL-SG108PE Switch. You can use double-sided tape to secure the power brick in place and zip ties to manage the power cord. The screw holes are designed for M5 screws Dimensions ( in mm ): W=254 x…

Pobrania
264
Polubienia
31
Ocena
4,67
P
Printablest0b1

Hanger for TL-SG105 network switch

Wall mounting bracket for our TP-Link TL-SG105 network switch.

Pobrania
264
Polubienia
23
Ocena
5
P
Printableskencyf

Logitech G102/203 zerømouse Mod (For 2ⁿᵈ gen LIGHTSYNC ONLY)

This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech . DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the…

Pobrania
262
Polubienia
15
Ocena
0
P
PrintablesBasti.mp4

TP-Link SG105E 10" Rack mount

Little remix to mount a TL-SG105E in your 10" Rack. You have to remove the two little screws under the switch. After that you have to slide the switch in the mount until its flush with the front. The last step is adding two M3x6mm screws…

Pobrania
257
Polubienia
18
Ocena
5
P
PrintablesFunky Dysfunc

TP-LINK TP SG1008 Wall Mount

Wall mount for a TP-LINK SG1008p network switch allowing it to be slid in and out from the top. Switch will need the sticky feet removed to face the other way from the picture. Needs supports. Print Settings Printer Brand: Creality…

Pobrania
255
Polubienia
23
Ocena
5
P

TP-Link SG1005P | SG105 | OC200 6-inch Rack Mount

A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…

Pobrania
254
Polubienia
22
Ocena
5
P
PrintablesFelte

Small Dual Rotary Encoder for EC11 15mm (G1000 and other Panels)

This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…

Pobrania
245
Polubienia
28
Ocena
0
P
PrintablesIlyas Sofian

Logitech G1008 Mod (G703 shell + G305 PCB)

Turn your Logitech G305 into the best ergo mouse in history! (which is G703/G603 imo) I made this because the G305 is still the cheapest good wireless gaming mouse in my country. HUGE credit to Rollinsloth's RS4 design;…

Pobrania
240
Polubienia
26
Ocena
5
P
PrintablesSchumo

Mini Wheels - Gotti G1001

I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…

Pobrania
236
Polubienia
35
Ocena
0
P
PrintablesDrTob

Wall Mount for TP-Link TL-SG1005P PoE Switch Power Supply

This is a 3D printable wall-mount bracket designed specifically for the power supply of the TP-Link PoE Switch model TL-SG1005P. It offers a straightforward solution for mounting the power supply under tables, on walls, or any preferred…

Pobrania
225
Polubienia
13
Ocena
5
P
PrintablesSpeeter

TP-Link TL-SG105 mount for IKEA SKADIS

An easy way to mount you TP-Link switch to the SKADIS pegboard

Pobrania
214
Polubienia
20
Ocena
5
P
PrintablesArman Sepetci

Xiaomi G10 Gear

Spare Part for Xiaomi G10 Vacuum Cleaner Gear that breaks up easily, you can replace it yourself. Print with %100 infill

Pobrania
213
Polubienia
12
Ocena
5
P
PrintablesRobotDoctor

Logitech G203 G102 Mouse Backplate (Larger Pegs)

Remix of UL G203 by K4mi1, Made the pegs bigger because they were breaking on me and added a screw-less version. Flip it 180 degrees so the pegs are pointing up, use tree support, use either 10% or 100% fill. Sand until the palm grip is…

Pobrania
211
Polubienia
24
Ocena
0
P
PrintablesCeleste

Sturdy 10 inch rack mount for the TL-SG105E consumer network switch

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…

Pobrania
211
Polubienia
36
Ocena
5
P
PrintablesJannisJFry

Xiaomi Mi G9 G10 brush wall mount

The Xiaomi mi G9 vacuum was delivered with 4 attatchments, but on the wall mount, you can only attatch 2(3, with one attatched to the vacuum) and one brush is always laying around. So I designed and printed another wall Mount for the…

Pobrania
209
Polubienia
27
Ocena
4
P
Printablesflyingtoaster0

Mount for TP-Link TL-SG105 Network Switch

This is a mount for a TP-Link TL-SG105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…

Pobrania
197
Polubienia
13
Ocena
5
P
PrintablesCAbernethy

Bambu X1 Build Plate Holder - Wall Mount - 5 to 20 Plates - Thin or Thick Plates (Lightyear G10)

I wanted a build plate holder for Bambu X1 plates (258x258mm) that is wall mountable. I wanted it to be able to fit both thin plates (Bambu) and thick plates (Lightyear G10). I wanted it to be able to store lots of plates (up to 20), and…

Pobrania
197
Polubienia
17
Ocena
4,75
P
PrintablesHenri S

tp-link TL-SG105PE Switch 10 inch rack holder

You need zipties for the power brick. The switch slides into the mounting brackets and locks itself in place. There is also a version for 19 inch racks:

Pobrania
186
Polubienia
30
Ocena
5
P
Printables7FM

TP-Link TL-SG108 Switch Mount

This is a remix of https://www.thingiverse.com/thing:3089825 with the following improvement: improve lan clip accessibility by changing the switch mount position reduce the mount width from 12 to 10mm slightly adjusted dimensions for a…

Pobrania
182
Polubienia
13
Ocena
5
P
PrintablesBlubber

Xiaomi MI G10 accessory Wall mount

This is a tool holder for Xiaomi G10 accessories. I think it will also fit for older versions but I did not test it. Its a two part design. You have to screw the wall mount to the wall with two screws. Then clip in the utility holder.…

Pobrania
177
Polubienia
25
Ocena
5
P
PrintablesDiew

10 inch rack TP-Link OC200 - SG105

remix from 6.5 inch rack i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.

Pobrania
175
Polubienia
9
Ocena
0
P
PrintablesKevinC3

TL-SG108-M2 Switch Mount for 10" Rack

Designed this to mount the TP-Link TL-SG108-M2 in a 10-inch rack. The switch doesn’t fit through the front opening but fits inside, so I made this custom shelf to hold it securely. Printed with - PETG If this print helped you out,…

Pobrania
171
Polubienia
8
Ocena
0
P
PrintablesiKlaus

TP-Link TL-SG105 Skådis Mount

Mount for TP-Link TL-SG105 Switch on IKEA Skådis pegboard

Pobrania
170
Polubienia
14
Ocena
5
P
Printableslordubbe

Xiaomi Mi G10 Dust Chamber Release Button

The button for the dust chamber broke on my Xiaomi Mi G10 Vacuum, rendering the entire thing completely useless (it would't stay shut). Through the power of 3D printing I am now once again back vacuuming dust and doggo hairs every day! I…

Pobrania
169
Polubienia
16
Ocena
0

Logitech G102 Custom Shell 54gm mod (collected from ABA from youtube)

This is the model of Logitech G102 54gm mod video from the youtube channel ABA I collected it from sketchfab abazibiz ( https://sketchfab.com/3d-models/logitech-g102-custom-shell-4d0cdf9a50e0479691c1cf2b92e3a54a ) but its a single STL and…

Pobrania
162
Polubienia
6
Ocena
0
P
PrintablesDušan

Xiaomi MI G10 Brush Bar Wall Mount

The Xiaomi Mi Vacuum Cleaner G10 has a very useful wall mount/charger, but when a standard brushbar is connected to a vacuum cleaner it needs a lot of space. This wall mount enables to have a brush bar separately on the wall. It is…

Pobrania
158
Polubienia
22
Ocena
5
P
Printablesmtominsk

TP-Link TL-SG108 holder for Ikea Skadis Voronoi Style

I had some fun do design this one. This might be the reason why it looks a little “fussy” :) I love the voronoi style, not just because of the optics but also to save material at printing. Donations are welcome and helping to keep my work…

Pobrania
152
Polubienia
19
Ocena
4
P
PrintablesDomNov

HPE ProLiant ML110 G10 4xLFF HDD CAGE

Since the official HPE price for a 4xLFF cage exceeds €200 in my region (Slovenia | EU), I decided to make my own. My server already has an 8xSFF HDD cage, so I designed an additional cage for LFF drives to prevent them from being stacked…

Pobrania
150
Polubienia
11
Ocena
0
P
PrintablesTapRackBang

Meross MSG100 Smart Garage Door Opener Mount

Simple mount to for a Meross MSG100 smart garage door opener. I added a spot on each end so that I could zip tie the cables as a strain relief mechanism.

Pobrania
150
Polubienia
25
Ocena
5
P

TP-Link TL-SG105-M2 2.5G 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG105-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings…

Pobrania
147
Polubienia
12
Ocena
0
P
PrintablesKaosuNeko

Tenda SG105 Gigabit Ethernet Switch DIN rail mount

Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times. You can also use a drill, for…

Pobrania
144
Polubienia
18
Ocena
0
P
PrintablesPeter Martin

TP LINK SG108 Gigabit Switch Wall Mount

TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.

Pobrania
142
Polubienia
9
Ocena
5
P
Printablesidcrook

10" inch 1U rack mount for side-by-side Raspberry Pi 4 and TL-SG105E Ver. 3

Wanted to use in my 10-inch rack setup since I need the extra space under the Pi for an errant tall PoE HAT in a 1U rack below where this rack will be installed. I subtracted some of the material from the print model surrounding the…

Pobrania
142
Polubienia
8
Ocena
0
P
Printablesottk3

TL-SG105 Screwable Mounting Plate

Mounting Plate for TP-Link TL-SG105 switch. Material: PLA+ Infill: 20% Support: Touching Buildplate

Pobrania
141
Polubienia
7
Ocena
5
P
PrintablesTRIMAGIA

tp-link TL-SG108E 10-inch rack mount

3D model for 3D printing designed to mount a TP-Link TL-SG108E switch into a 10-inch rack. The switch is inserted without its original metal case – only the bare circuit board is used. You will need m3 inserts. Print withou supports.

Pobrania
137
Polubienia
31
Ocena
0
P
PrintablesEvandro Assis

Switch TP-Link SG1024DE mount

This is a design allowing to mount TP-Link SG1024DE switch on a wall or table. It is designed in 3 different parts, one on the left and one on the right that are screwed onto the switch, the 3rd piece serves both sides and works as a…

Pobrania
136
Polubienia
19
Ocena
5
P
PrintablesGiorgio

TP-Link TL-SG1005D switch backplate

Just a small backplate to secure the switch in place. You can use double-sided tape, a single 3x16mm screw or even cable ties. I was originally going to mount on the underside of my desk but after printing figured I could just zip tie it…

Pobrania
130
Polubienia
5
Ocena
1
P
Printablesmaciek18339

TP Link SG105 mounting bracket

This mount is easy to print, resource friendly and reliable. There is no need to use two handles. But it can certainly add grip security. You can use doublesided tape/something else to make it REALLY tight. I'm recommending PET-G or ABS…

Pobrania
128
Polubienia
21
Ocena
5
P
PrintablesDespairFlare

TP-Link TL-SG105 Wall Mount - Renter Friendly

This is a renter friendly wall mount designed for the TP-Link TL-SG105 5-Port Desktop Switch. Add 3M Command Strips (or something equivalent) to the back of the mount, put it on your wall, and hook the network switch onto it. Printed in…

Pobrania
128
Polubienia
8
Ocena
0
P
PrintablesS. Vourc'h

TP-Link TL-SG1005D - Support for wall ou desktop mount

This is a support for wall or desktop mount for the TP-link TL-SG1005D, works well and tested on a real router. Printed for test on Creality Sermon V1 PRO, low quality (0,28mm) with supports but might work without supports also (not tested)

Pobrania
126
Polubienia
3
Ocena
5
P
PrintablesSwampy

TP-Link TL-SG105 Cable Bracket

Update 11/18/2024: I have added a version with larger openings for round cables. This is a quick little cable bracket for the TP-Link TL-SG105 5 port ethernet splitter/switch. Bracket will snap or slide into place on the unit. It allows…

Pobrania
125
Polubienia
21
Ocena
0
P
PrintablesMarco Alici

Brush Bar Wall Support (Xiaomi Mi Vacuum Cleaner G9/G10)

The Xiaomi Mi Vacuum Cleaner G9 has a very useful wall mount/charger. It hosts the vacuum and 2 of the 3 accessories. The third (usually the brush bar with the extension rod) is intended to be mounted onto the vacuum, but I had no enough…

Pobrania
122
Polubienia
21
Ocena
5
P
Printablesbatonikleonardo

TP-LINK TL-SG105 rack10 mount

Rack10 mount for switch TP-LINK TL-SG105

Pobrania
121
Polubienia
21
Ocena
0
P
PrintableszeddiArts

extra Hold for Xiaomi Mi G10 Vacuum Cleaner Wallmount

Assembly 1. Press the plates together. 2. Remove the 2 supports. 3. Screw together 2x 3x16mm screws (3x20mm screws/ glue also works) 4. Clip in

Pobrania
118
Polubienia
18
Ocena
4,67
P
PrintablesR2D2D2

TP-Link 8-Port Desktop Switch Mount (TL-SG108)

I wanted to mount my TL-SG108 Desktop switch under my desk to use the space better but the mounting channels are meant for walls. i designed these brackets to be as unobtrusive as possible and hold the switch securly upside down.

Pobrania
117
Polubienia
12
Ocena
5
P
PrintablesFinkerton

TL-SG108 Rackmount Pin_Clips

To secure the switch, insert into the rack mount, Then insert the small side into the switch slot and slide the large side (with the flat side toward the back of the switch) onto the raised area on the mount to lock it into place.

Pobrania
117
Polubienia
10
Ocena
5

TP-Link 1 Gig Switch 8 port Model number: TL-SG108E

A simple mini rack slot in for TL-SG108E TP Link switch

Pobrania
117
Polubienia
7
Ocena
5
P
PrintablesBenni3D

Replacement Gear Xiaomi G10 vacuum Bruschead

Replacement gear for the Xiaomi G10 cordless vacuum cleaner. It is designed to replace the original gear that drives the floor brush. This gear is connected to the motor via a toothed belt. Here are some key features: Print it yourself…

Pobrania
116
Polubienia
12
Ocena
0
P
Printablesnzt2afrb5e3y

TP-Link TL-SG1008P HSW/wall mount

considerations before printing Both switch and power supply slots are symmetrical on 2 axes: the devices can be inserted from either end, and facing towards or away from the wall/HSW lattice. In order to choose, consider where you want…

Pobrania
116
Polubienia
7
Ocena
0
P
Printablesmaggoh

TP-Link TL-SG108 Network Switch mount compatible for ikea pax (32mm grid)

TP-Link TL-SG108 Network Switch mount compatible for mount into an IKEA pax cabinet hardware needed: 2x heat set insert M4 (length: 8,1mm) - i used the one from Ruthex 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (IKEA)

Pobrania
113
Polubienia
25
Ocena
0
P
PrintablesUwUTastisch

10inch Rackmount, TP-Link LS108G, TL-SG108 and 2 Keystones, FreeCAD

I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…

Pobrania
111
Polubienia
18
Ocena
5
P
PrintablesiahiMsogarD

Tplink TL-SG105E Rack mount

Print with the wing on the bed.

Pobrania
109
Polubienia
12
Ocena
0
P
PrintablesVulcansHammer

TP Link TL-SG1016PE Rack Mount Ears

Rack Mount Ears for TP Link TL-SG1016PE switch Fits 19" rack I used 4x M3 screws with washers to install. Prints without supports, more infill is better.

Pobrania
107
Polubienia
11
Ocena
5
P
Printablescloudybasement

Skadis - TP-Link TL-SG105 Network Switch

Bracket to hold a TP-Link TL-SG105 Network Switch on an IKEA Skadis pegboard using the built-in keyhole mounts.

Pobrania
104
Polubienia
11
Ocena
3
P
PrintablesPaco

SSG10A3 front rail

A front picatinny rail for the Novritsch SSG10A3, or the MLC-S2 Skeleton Stock from maple leaf in general. Also added the .f3d (Fusion) file, in case someone wants to remix for example the base of the model. I printed it on my prusa…

Pobrania
104
Polubienia
3
Ocena
0
P
PrintablesMa Plümmer

Xiaomi Mi Vaccum Cleaner G10 accessory holder

This is a accessory holder for the Xiaomi Mi G10 vaccum cleaner. I used Prusament PETG Signal White with: 0.16mm resolution 30% infill

Pobrania
103
Polubienia
19
Ocena
5
P
PrintablesThor Sten

TP-Link SG1005 vertical mount for DIN rail

better solution for mounting a network hub SG1005 in vertical position

Pobrania
103
Polubienia
4
Ocena
0
P
Printablesklein_walke

Lab Rax - 10" - 1U - TP-Link_TL-SG108E

---> English Lab Rax - 10" - 1U - TP-Link_TL-SG108E: TP-Link_TL-SG108E 10" 1U Mount with lid. 2x M3 heat inserts + 2x M3x6mm needed. I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U - TP-Link_TL-SG108E:…

Pobrania
102
Polubienia
24
Ocena
4
P

TP-Link TL-SG105-M2 2.5G 19-inch Rack Mount

A 2 part modular 19-inch rack mount for the TP-Link TL-SG105-M2 2.5G switch. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…

Pobrania
101
Polubienia
7
Ocena
4
P
Printablesrav

Airflow direction changer for Xiaomi Mi Vacuum Cleaner G10

I had a problem with my Xiaomi Mi Vacuum Cleaner as when vacuuming in narrow places such as staircase it blew air to sides which bounded from the walls blowing off dust in the air. This simple airflow changer makes the air goes to the…

Pobrania
100
Polubienia
15
Ocena
4
P
PrintablesDirk55555

Switch under -desk mount for TP-Link TL-SG1016D 16 Port Switch Halterung unter Schreibtisch

Designed to attach to the underside of a desk, for TP-Link TL-SG1016D 16 Port Switch. Print two pieces Unter Schreibtisch Halterung für einen TP-Link TL-SG1016D 16 Port Switch. Zwei Stück drucken

Pobrania
99
Polubienia
5
Ocena
5
P
PrintablesJesse Schauer

TP-Link TL-SG108E Mount for Leviton Structured Media Center

A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with…

Pobrania
99
Polubienia
10
Ocena
0
P
PrintablesBrandon

TP Link SG108E Desk Stand

Small switch stand designed to work with TPLink SG108E, 8-port switch, but should work with any switch that is 158mm wide which I believe a lot of 5 and 8 port switches are; just double check yours. The bottom cable ties allow for your…

Pobrania
98
Polubienia
22
Ocena
4