Wyniki wyszukiwania: gp

Sortowanie

Liczymy pasujące modele…

GPU Support Nvidia/Radeon

3D-Printed Adjustable GPU Support for NVIDIA & Radeon Graphics Cards Take your PC build to the next level with this 3D-printable GPU support , designed specifically for makers. Prevent graphics card sag while adding a touch of personality…

Pobrania
18 761
Polubienia
2995
Ocena
4,92
P
Printablesnyzomandias

GPU Support

This simple and easy to print GPU Support is 8 cm(completely screwed, ~12 cm completely unscrewed)- and added a groove at the bottom so that a magnet can be glued to the bottom and it holds in place so much better. It's printing fine when…

Pobrania
9235
Polubienia
528
Ocena
4,95
P
PrintablesDiPT

GPU support jack (or not)

Universal GPU support jack for PC cases, the total height can be adjusted between 80mm and 130mm. Update 28/09/2021 - Added a longer screw option, taking the total height up to 220mm. Print the base in the orientation provided, with no…

Pobrania
8517
Polubienia
945
Ocena
4,94
P
Printablesmuzi.works

H2T - Case for Heltec T114 with GPS running Meshtastic

A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…

Pobrania
6684
Polubienia
885
Ocena
4,88
P
PrintablesYngwieR

PCI-E Display Stand (GPU Hall of Fame)

Build a hall of fame for old graphics cards you have used! Prints on virtually anything without supports.

Pobrania
4455
Polubienia
762
Ocena
4,94
P
PrintablesSanguium

GPU anti-sag

Pillar to keep your GPU in place. Should allow for around 8,5 cm to 9,5 cm tall. Print Settings Supports: No Resolution: 0.2mm Infill: 20%

Pobrania
3822
Polubienia
244
Ocena
4,87

Adjustable GPU Graphics Card Support Bracket

Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…

Pobrania
2902
Polubienia
446
Ocena
4,71
P
PrintablesNessuno0505

GPU anti sag support holder

This is a GPU anti sag support holder. It is designed to be as minimalistic as possible. It is intended to be used with Fractal Design Meshify 2 Compact case, but it can work with other cases close in shape and size. Similar metal-made…

Pobrania
2449
Polubienia
109
Ocena
4,85
P
PrintablesRecticle

Magpul rail cover type 2 (M-lok)

Magpul Rail cover type 2 made in Fusion 360. This works just like the real thing, insert the base into an m-lok slot on your handguard, click in the "locktab" and its done. No extra's needed, only 3D printed parts. And best of all, when…

Pobrania
2229
Polubienia
358
Ocena
4,75
P
PrintablesAdi CEvil

3D-Printed Enclosure for Heltec V4(GPS)

This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…

Pobrania
2192
Polubienia
159
Ocena
4,44
P
PrintablesRamBros

GP60 Locomotive (SP) - Dragon Railway

Full Guide: Instructables The GP60 is a diesel-electric locomotive made by EMD in the 80s. It was used for freight trains and was known for its cab-forward design and improved fuel efficiency. Despite being largely replaced by newer…

Pobrania
2091
Polubienia
328
Ocena
5
P
PrintablesAlley Cat

Heltec T114 Pocket GPS Case

Commercial Use and Attribution Notice: Alley Chat HT114 Pocket Pro © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…

Pobrania
2016
Polubienia
238
Ocena
5
P
PrintablesRamBros

GP7 Locomotive - Dragon Railway

Full Guide: Instructables The EMD GP7 is a type of diesel-electric locomotive that was manufactured by the Electro-Motive Division (EMD) of General Motors between 1949 and 1954. The GP7 locomotive scale model is a 3D printable and…

Pobrania
1905
Polubienia
248
Ocena
5
P
PrintablesDopins

Minisforum DEG1 eGPU Dock Enclosure / Case / Shell

I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…

Pobrania
1811
Polubienia
134
Ocena
5
P
PrintablesJames Surtees

GPU Adjustable Anti Sag Bracket

You can use 1 or multiple of this screw to prevent wear on the PCIE slot for your GPU. It will not melt if printed in PLA.

Pobrania
1807
Polubienia
98
Ocena
4,83
P
Printablesslabua

Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready

Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…

Pobrania
1759
Polubienia
430
Ocena
4,78
P
PrintablesWaschtl

GPU Holder Max Pro 9000 [Parametric]

This is a little threaded GPU Support i made in Fusion360. Adjustable from 56mm to 96mm. You can customize the height / thread length in the provided Fusion360 file.

Pobrania
1705
Polubienia
114
Ocena
4,75
P
PrintablesWesty

GPU Simple Sag Support Bracket

This two piece print uses a screw to adjust height anywhere from a 90mm to 55mm gap between the GPU shroud and the case. Update: A few printers have expressed that the threads are tight. Be aware, depending on your print settings, you may…

Pobrania
1599
Polubienia
101
Ocena
4,82
P
PrintablesMiklas

Gpu Anti sag support

Adjustable GPU Anti-Sag Support (8-12 cm) – 3D Printable Model Protect your graphics card from sag with this adjustable GPU anti-sag bracket , designed for seamless 3D printing and smooth height adjustment . This model ensures your GPU…

Pobrania
1567
Polubienia
57
Ocena
5
P
PrintablesQaz

Grips for GPD Win Max 2

2024/02/17 Update : New design V105 for those who wants a tight fit : Ultra tight fit : making use of the screw holes of the WM2 to clip in, grips are making one with the computer body Standing mode : new stand and angle let me know what…

Pobrania
1471
Polubienia
64
Ocena
4,83
P
PrintablesRetro Frog

Original XBox 1.0 GPU 40mm Fan Adapter

I designed this GPU fan adapter plate for the original XBox to allow you to use a 40mm fan instead of the loud and proprietary original fan. This will only work on the 1.0 version of the original XBox. If your XBox is a later model and…

Pobrania
1458
Polubienia
140
Ocena
5
P
PrintablesAdi CEvil

3D-Printed Case for Heltec V4(GPS)

This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…

Pobrania
1407
Polubienia
101
Ocena
4,4
P
Printablesjulioprju

Soporte GPU extensible

Necesitaba un soporte para la GPU y pues hice y personalicé uno, me gustó tanto que quiero compartirles, hice con varios logos. SIN LOGO ASUS Geforce RTX GIGABYTE Nvidia ROG Gaming Si desea algún otro logotipo me puede escribir y con…

Pobrania
1402
Polubienia
67
Ocena
5
P
PrintablesDaniel Vitanza

Jack SkellingPot

Latest News: New Christmas Version! Print one of the vase option available here. Print the Christmas Lid available at this link: Santa Jack SkellingPot by Daniel Vitanza | Download free STL model | Printables.com 1. Introduction A vase, a…

Pobrania
1276
Polubienia
307
Ocena
4
P
PrintablesBig Fish

GPU Support Jack Stand

This isn't just another functional piece of equipment, it's a statement of one's love for automobiles cast into a piece of tech hardware. Now, not only can you secure your GPU, but also express your love for cars through this special…

Pobrania
1273
Polubienia
121
Ocena
4,33
P
PrintablesKN16

Magpul AFG Clone - Picatinny Rail

Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…

Pobrania
1260
Polubienia
260
Ocena
4,8
P
Printablespixelglance3d

Watercooled GPU Vertical Bracket for Lian-Li O11DXL-X

Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…

Pobrania
1237
Polubienia
107
Ocena
4,5
P
PrintablesSunshine

3D print PCIE slot for 120mm Fan to replace fans on GPU

It's a Fan mount for 120x120x25mm fan that you screw in with standard fan screws. You can also print joints to add up a second 120mm FAN. That mount replace a 2x 92x92x8mm to a 120x120x25mm. It helped me to get 7C lower temperatures under…

Pobrania
1160
Polubienia
121
Ocena
5
P
PrintablesThe Bengineer

GEPRC Mark5/4 28mm GPS mount (BE280)

28mm GPS mount for the GEPRC Mark5 and Mark4 FPV drone frame. The VTX antenna mount is for TBS-style antennas, and the receiver antenna mount is for standard T-antennas. My reason for using a 28mm GPS instead of the usual 18–25mm one is…

Pobrania
1117
Polubienia
46
Ocena
5
P
PrintablesTom_Ash

3D-Printed Enclosure for Heltec V4(GPS)Fixed

There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…

Pobrania
1111
Polubienia
123
Ocena
4,71
P
Printableswipfbrandon

GPU Support Jack

Newer 30xx and 40xx series Nvidia graphics cards (probably AMD cards as well) pack a punch, but with that comes extra size & weight. Most PC cases do not come fitted with GPU support hardware. This adjustable model should work for most…

Pobrania
1101
Polubienia
109
Ocena
5
P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 21x21mm GPS module such as HGLRC M100-5883

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…

Pobrania
1096
Polubienia
44
Ocena
5
P
PrintablesSteve

Prusa GPIO "Hackerboard" Cover

Printed cover to mount the Prusa GPIO “Hackerboard” to the frame. 4x M3x6 BHCS or SHCS to mount the board to the cover 2x M3x10 SHCS to mount the cover to the frame Wires route through the MMU pathway into the electronics enclosure.…

Pobrania
1086
Polubienia
274
Ocena
4,98
P
PrintablesTohmis

GP5 Filter

I couldn´t find any 3D printable models for the GP5 filter so i created my own one. The bottom part (bot) clips into the top part after printing. The top part should be printed with the thread pointing up. The bottom part should be…

Pobrania
1083
Polubienia
46
Ocena
5
P
Printablesnbss

KTM 890 Adventure GPS Mount

Created GPS Mount after waiting for KTM Powerparts GPS mount (A61012992044) being on backorder. There are two file versions. One that fits the 890-R windscreen and the other for the S-model windscreen. The S-model version extends out…

Pobrania
1074
Polubienia
41
Ocena
5
P
PrintablesStu142

GPU Support

This is a GPU Support that I designed to help prevent sag. It is simply placed under the corner of the GPU and extends to the bottom of your PC case and I think it looks pretty cool. I have included a large selection of sizes so just…

Pobrania
1033
Polubienia
130
Ocena
4,78
P
PrintablesMircea

BN220 GPS mount for GEPRC Mark5

BN220 GPS mount for GEPRC Mark5 Allows the BN220 GPS module to be mounted on a GEPRC Mark5 with the TBS Crossfire configuration. Besides the BN220, it also houses the VTX antenna and the Immortal Crossfire T antenna. The VTX antenna and…

Pobrania
1027
Polubienia
42
Ocena
5
P
PrintablesHackthis02

GPU Support

Universal GPU support The clearance on the screw portion is tight. Depending on your printers tolerances, you may need to adjust the size of the top screw to fit properly.

Pobrania
1027
Polubienia
41
Ocena
4
P
PrintablesDzR

GPU anti-sag support

Remixed the original to fit triple slot GPU coolers. Height is adjustable in range of 66-82mm. Print in PETG or other temperature resistant materials like ABS, ASA, Nylon etc. It fits a Phanteks P400a with an Asus ROG Strix 3070

Pobrania
1025
Polubienia
61
Ocena
5
P
PrintablesOleksii

GPU support jack (definitely)

Reasons to make a remix: Added a low-profile base to decrease minimal height to 72 mm Needed a flat bottom for an uneven surface Angular design Configurations: Low profile base + short screw: 72mm - 108mm Normal base + short screw: 80mm -…

Pobrania
1011
Polubienia
105
Ocena
4,88
P
PrintablesZan Hecht

Raspberry Pi 40-Pin GPIO Cover

Cover for the Raspberry Pi GPIO pins, to prevent accidentally shorting them out when using a case (such as this one ) that leaves them exposed. This remix has a lip at the top for easy removal -- it's not a tight fit (assuming your…

Pobrania
976
Polubienia
60
Ocena
5
P
PrintablesChewbugga

GPU graphics card anti-sag support

This is meant to eliminate sag on the free end of your graphics card. The ones I found online were to flimsy for my taste so I made a bulkier assembly. Start with the screw and loosely thread the nut onto it. Then add the sleeve and…

Pobrania
959
Polubienia
74
Ocena
5
P
PrintablesGP

GP's Skadis Hook NG + STEP

Skadis-side only hook that makes other GP's models skadis-attachable. STEP file included.

Pobrania
957
Polubienia
72
Ocena
5

GPU Sag Support - Multiple Faceplate |Nvidia | Radeon |

3D Printed GPU Sag Support for Nvidia and Radeon Graphics cards. GPU sag is no longer a problem with the 3D Printed GPU Sag Support. the model is easy to print, no support is needed, and the model is designed to save printing pop and…

Pobrania
955
Polubienia
95
Ocena
5
P
PrintablesH44S

GPU support (universal) stütze

PLA or PETG Layer 0,2 Infill ~15-40% Minimum 65mm Maximum 105mm

Pobrania
946
Polubienia
30
Ocena
5
P
PrintablesPeter Farell

Sussie Magpie : Kpop Demon Hunters

Sussie : Kpop Demon Hunters. Magpie I was going to put this in Myclub but I lost my eye and rushed it and then gave up. So I will leave it here. Lots of missing details… and the legs are cattywampus… the ridge line bothers me. But I just…

Pobrania
943
Polubienia
242
Ocena
0
P
PrintablesAlley Cat

Heltec T114 Slim Pro GPS Case

Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…

Pobrania
913
Polubienia
119
Ocena
5
P
PrintablesKelignor

GEPRC mark 4 7 inch GPS(BN880) + two sma mount

This is my first design of mount for BN 880 GPS and two sma connector from DJI air unit. Printed in Flexfill 98A with 0,4 nozzle at 0,2 layer height

Pobrania
904
Polubienia
41
Ocena
0
P
PrintablesHenningge

DIN EN ISO 527-2 Typ 1B Tensile test / Zugprobe

Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…

Pobrania
893
Polubienia
20
Ocena
5
P
PrintablesChassou

GPU Stand dual slot support free

Demat, I had the idea of exhibiting some old GPUs to start my collection. I couldn't find a GPU support that I like so I designed one without a support to make printing easier. What do you need? only less of 30g of material and a little…

Pobrania
891
Polubienia
102
Ocena
4,92
P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 25x25mm GPS module BZ-251

This remixed part provides a mounting for 25x25 mm BZ-251 GPS module on a SpeedyBee Mario 5 frame. As I don't own such GPS, please let me know if it fits.

Pobrania
881
Polubienia
36
Ocena
0
P
Printablesnot1x23

Adjustable Nvidia / Radeon GPU Support

This is adjustable support for GPU from 55 mm to 90 mm. I uplouded Fusion 360 files so you can modify it.

Pobrania
878
Polubienia
34
Ocena
4,67
P
Printablesmichaelruml

Antique Pillar GPU Anti-sag Support Bracket | Graphics Card stand (adjustable height) |

A simple support for your oversize gpu. I used to sell these on Etsy. I don't anymore, so I thought it would be nice to publish these for anybody to print themselves. Print with something that can withstand higher temperatures (ideally…

Pobrania
867
Polubienia
84
Ocena
4,83
P
PrintablesGolden4

Segway Navimow GPS 90° wall mount

This is a remix from @massis to mount the Navimow's GPS receiver with a 90° angle.

Pobrania
852
Polubienia
38
Ocena
4,67
P
Printablesandreirusu99

GepRC Mark5 GPS, vTX and RX antenna mount

The part accepts a BN-220 GPS module, a standard vTX pigtail with a flange mount, and standard 3mm antenna tubes (included with the Mark5 frame kit) Prints without support. Can be printed in PETG or TPU, depends on what you prefer. Photos…

Pobrania
817
Polubienia
41
Ocena
5
P
PrintablesSirn

GPU Anti-Sag Support (OpenSCAD)

This is a simple GPU anti-sag inspired by Sanguium's excellent design . However, I need something that can support 3.5 slots at about 53 mm total height which is far shorter than anything I could found. So I decided to make my own in…

Pobrania
806
Polubienia
61
Ocena
5
P
PrintablesGlitch

GPU Jack

An adjustable support to stop your GPU from drooping.

Pobrania
801
Polubienia
70
Ocena
3,78
P
PrintablesTåkefyrsten

GPD Win Max 2 Grips

Print vertically for best strength. Rails might be too loose or too tight depending on 3d printer settings, use a hammer and/or glue if needed. :) Settings I used: 0.20mm layer height 15% infill Support for critical overhangs Filament:…

Pobrania
784
Polubienia
17
Ocena
4
P
Printableswakareva

modified case for raspberry pi 4 with camera pi + GPIO pins + 30x30 mm fan

I've solved some errors in the lower part and modified the top part to have space to use the GPIO pins from outside and have the pin to fit a 30x30 mm fan without screws. The fan is oriented to blow air inside. I've removed the holder,…

Pobrania
778
Polubienia
60
Ocena
4,71
P
Printablescurcuz

Lian Li O11 Dynamic GPU anti-sag for bottom fans configuration

I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…

Pobrania
778
Polubienia
82
Ocena
5
P
PrintablesKohaku

Gpu stand

Available in AMD, INTEL, NVIDIA and NO NAME initials. Minimum height is 50mm, maximum 79mm, diameter of the stand is 20mm

Pobrania
777
Polubienia
52
Ocena
4,4
P
PrintablesPhil Asdf

gpu support bracket (smaller version)

Height should be adjustable between roughly 60-80mm. I also changed the magnet slot to fit a 6*3mm(d*h) Magnet. Also the top part was modified a bit to be just round, i didnt like the “spikes” on that part. I also included a locknut, but…

Pobrania
775
Polubienia
100
Ocena
4,5
P
Printablesdancan13f

Prusa Core One/+/Gen2 Single Wifi and GPIO Cover

This design replaces the original Prusa Core One Wifi cover. In a single cover it combines the Wifi and the GPIO interface. ACCESSORIES This part is secured with the original M10 SHCS screw The GPIO card is secured with 4 x M3x6mm SHCS…

Pobrania
761
Polubienia
256
Ocena
4,97
P
PrintablesMaverick0197

1911 Extended Magazine Magpul/Grip

Edit 02/21/2023: Added ver.4 & STEP files. Added holes for set screw (M3). Lost original ver.2 so named the updated one ver.2.1. Edit 03/17/2020: Added image with ver.3 Base plate/grip extension for 10 round MecGar 1911 magazines. I…

Pobrania
751
Polubienia
78
Ocena
5
P
PrintablesMlodycnl

Custom magazine extension for magazine GL9 magpul Glock 17 + 2 extra ammo.

Custom magazine extension for magazine GL9 magpul Glock 17 + 2 extra ammo. The product is made in such a way that no screws need to be used.

Pobrania
743
Polubienia
48
Ocena
5
P
Printablestn00364361

Raspberry Pi Zero 2W case with heat sink and GPIO cutout

The top/bottom layers are only 0.4mm thick, but the rigidity is not compromised thanks to the ribs. The whole thing can be assembled with four M2.5x8 screws. This model is designed to be printed with a 0.8mm wall thickness (0.4mm…

Pobrania
730
Polubienia
66
Ocena
5
P
Printablesnullrails

GP60 Locomotive Body - AMS Norfolk Southern Livery

This is rambros ' excellent EMD GP60 model for Dragon Railway , remixed with a Norfolk Southern livery to print on a Bambu AMS. This contains the new files for the NS livery, the rest of the parts and full assembly instructions can be…

Pobrania
729
Polubienia
122
Ocena
0
P
PrintablesDockGuy

eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]

Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…

Pobrania
728
Polubienia
58
Ocena
5
P
PrintablesPeGys

Vertical dual/triple slot GPU stand (display only)

Went for a brand new, shiny RTX card but don't want to say goodbye to you loyal buddy that kept you company in good and bad times ? Why not keep him close and give him a nice spot in your hall-of-fame with a cool display stand. All in…

Pobrania
704
Polubienia
70
Ocena
5
P
PrintablesYorikMol

SpeedyBee Mario 5 Single Antenna+GPS+XT60

I needed a mount for a single SMA adapter, an 18mm x 18mm GPS, and an XT60 connector. There was no such variant among the models provided by Speedy Bee, so I took the closest original model, which already had mounting for the XT60 and SMA…

Pobrania
704
Polubienia
20
Ocena
0
P
PrintablesVega D

Thunderbolt eGPU casing TH3P4G3

This was made with an SFX power supply and AMD RX5700XT in mind. I highly recommend you use a gpu “blower” style cooler as it will be much easier to cool. During assembly, make sure the PSU fan is facing the outside, otherwise it will not…

Pobrania
698
Polubienia
44
Ocena
4
P
PrintablesGlenn37216

GPU SUPPORT BRACKETS (CUSTOM)

5-2-2021 - Added Night City Police Department (Cyberpunk) Themed Rail and Slider 3 parts: Badge Slider - A , Badge Slider - B , NCPD Rail . Note ! Slider has to be assembled with small screws. 12-3-2020 - Added Phanteks Rail Custom GPU…

Pobrania
697
Polubienia
128
Ocena
5
P
PrintablesAhmad

GPD Win 4 Grip Case | 2 Versions

Printing Instructions: Materials: PLA, PETG, or ABS Support: 60-65 degrees (overhang) Infill: 10-20% Cubic INFO: My friend recently purchased the GPD Win 4 and needed a case, but there is none in the market yet other than 3D-printable…

Pobrania
686
Polubienia
21
Ocena
5
P
PrintablesDjPatubeer

GPU holder ajustable

This support for large graphics cards is the perfect solution for users looking for a safe and efficient way to keep their GPUs in place. Its extendable design allows it to adapt to different card sizes, from 52mm up to 72mm. Fits on any…

Pobrania
685
Polubienia
26
Ocena
5
P
PrintablesBenevision

GP-5 Filter Replica

I wanted to use my Soviet era GP-5 gas mask for tasks that required particulate filtration (and because it looks cool). The original filter has several heath concerns around its use, so I decided to model a replacement shell to 3D print,…

Pobrania
656
Polubienia
41
Ocena
0
P
PrintablesQuadView

Extended Magpul PMAG Baseplate for Glock 19 and Glock 17

Simple print that doesn’t change the way the magazine works except to add some more area to grip. The PMAG baseplase is almost a decoration unlike the Glock baseplate for the 10 rounders. So changing it is easy and it also isn’t really…

Pobrania
648
Polubienia
61
Ocena
4
P
Printablesunpaved studio

DJI O3 GPRC Mark 4 Upgrade with Antenna, GPS and Crossfire Holder

Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…

Pobrania
647
Polubienia
37
Ocena
0
P
PrintablesBingo

GPU Stand

Precise universal model on GPU Stand For Mining Rig for different models graphic cards. Print Settings Printer: Tronxy Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Filament: DasPrint PLA Category: Other

Pobrania
644
Polubienia
71
Ocena
5
P
PrintablesRadmuffins

Enclosure for AgOpenGPS PCBv4.xSTD v4

Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. This version is fully 3d printable. You can choose from many face and back plates available. But F9P users can only connect antenna…

Pobrania
638
Polubienia
12
Ocena
0
P
Printablesjmynheir

Magpul PMAG Gen M3 Follower 223Rem / 556NATO

Replacement follower for Magpul Gen M3 Pmag in .223 Remington / 5.56 NATO. Modeled in Blender, I included the .blend file. If you are looking for the baseplate, @mocobaco has one at https://www.thingiverse.com/thing:2646840 Category:…

Pobrania
634
Polubienia
55
Ocena
0
P
PrintablesCaprii

Bottom Plate for Magpul PMAG Gen3

Hey Everyone, Couldn't find a Ranger-Styled bottom plate for my PMAG gen3 so i made one. Fits the .223 PMAG perfectly as FDM or SLA print. Print it standing, so the sides where it connects with the mag are extra strong. I recommend resin…

Pobrania
629
Polubienia
74
Ocena
5
P
PrintablesFlaszynski

GEPRC Cinebot30 GPS mount

Hi, I've made remix existing Geprc GPS mount and fit it to use with GEPRC Cinebot30. You can use it with two antenas RX and VTX. Best to print from TPU or other flexible filament.

Pobrania
629
Polubienia
29
Ocena
4,5
P
Printablestomvh

30, 40 or 50 RTX Series Nvidia GPU USB-Stick

Either print Black and Silver with dual extrusion (printing with 2 plastics) or print the Full version. You can, but it is very hard to, print this design in 2 colours seperately and later assemble them. I have seen someone do it.…

Pobrania
624
Polubienia
127
Ocena
5
P
PrintablesAlex

GEPRC Cinelog 30 v3 GPS Mount for 121 GPS (12mm) Cinelog30 Cinelog30v3

I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…

Pobrania
620
Polubienia
28
Ocena
0
P
PrintablesSceal

MLOK Angled Vertical Foregrip using Magpul OEM hardware

Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…

Pobrania
617
Polubienia
124
Ocena
5
P
PrintablesCarter Nguyen

Vex MagPlates VRC | Custom Quick Swap Plate Solution for Vex Robotics

Custom Quick Swap Plates for VEX. These use 10x3MM Neodymium magnets and are superglued into the plates. You will need to either have a Multicolor 3D printer, or use a M600 Macro to swap between colors. The plates are blank so they will…

Pobrania
615
Polubienia
19
Ocena
0
P
PrintablesNirvash

GPU anti sag support holder

This is a remix of nessuno0505's thing but I modified it to hold two small 6x3 round magnets because I didn't have the magnets he used. I also added a small hole to pry the magnets out of the print with a paperclip or a toothpick.

Pobrania
609
Polubienia
39
Ocena
5
P

"Magpul" like vertical grip RIS (Picatinny) (2 Versions)

Two versions tactical vertical grip inspired by Magpul modeled to by printed easily in one piece without suport. Need M3 fasteners. Printing "0.20mm SPEED" 30% Infill 4 Parameters (Because of the clamping) Prusament PETG base settings…

Pobrania
606
Polubienia
83
Ocena
5
P
PrintablesHD_Creator

Meshtastic Heltec V3 housing with space for GPS and battery

Usecase Meshtastic is a open source community project that aims to provide a off-grid, decentralized, mesh network that runs on affordable, low-power devices. https://meshtastic.org/ This design offers a snap-housing for one of the…

Pobrania
603
Polubienia
81
Ocena
5

Meshtastic Vehicle Utility Node Enclosure for LoRa - Supports GPS and a Wide Voltage Input

This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…

Pobrania
595
Polubienia
175
Ocena
5
P
Printablessmallr

POWERCOLOR REAPER AMD RX 9070 XT Custom GPU Shroud

This is a custom 3D printable shroud compatible with slim 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. Easy to print and assemble, you just need fan…

Pobrania
594
Polubienia
133
Ocena
0
P
PrintablesMartin

GPU Display Holder

PLA/PETG Horizontal and vertical 4 Layer 30 % Infill Organic Support

Pobrania
585
Polubienia
157
Ocena
5
P
PrintablesAlpha_Salsa

"Epsilon 570 V2" 4.77L ITX pc case | low profile GPU

This is the second rendition of my first case ( here ). The case got an entire overhaul while mantaining the low profile gpu sandwich design. It consists of 10 pieces, it can be printed with a small printer and does not use threaded…

Pobrania
584
Polubienia
177
Ocena
5
P
PrintablesMicro Center

GPU Kit Card

GPU Kit Card Inland Filament Used: Dual Color Silk Gold-Grey Black PLA+ Silver PLA+ Printer Settings: 1 Hr 11 Min 220°C Nozzle Temp 60°C Bed Temp No Supports Infill: 15% Gyroid Speed: 100mm/s wall, 180mm/s infill, 300mm/s travel Assembly…

Pobrania
584
Polubienia
194
Ocena
5
P
PrintablesFAB1150

TTGO T-Beam V1.1 case for big GPS antenna

This is a remix of tpatrickwalsh's TTGO T-beam v1.1 (and v1.0) case ( https://www.thingiverse.com/thing:4753247 ), modified to fit the bigger GPS antennas for better reception. I have found that the bigger antenna is a must, as the…

Pobrania
582
Polubienia
48
Ocena
4,8
P
PrintablesAreiouS

Graphics Card (GPU) Stand/Holder for Display

GPU display stand purely for display purposes, to display your old gpu on a nice stand. Made some changes to the original, no supports needed, made the bracket easier to print and a lot stronger, also made it printable on printers with a…

Pobrania
553
Polubienia
96
Ocena
5
P
PrintablesMogu1lito

GPIO cover (Raspberry Pi Zero case/Zero W case/Zero 2 W case (2h print))

Set 0 botton and top layers Infill: Honeycomb, I used 25%

Pobrania
548
Polubienia
38
Ocena
5
P
PrintablesLevi Sitts

KPop Demon Hunters Magpie Sussie Multi Material

10/26/2025 - Edit: Version 2 is now available. The feet extend further forward for better balance and movie accuracy, and the hat is now more accurate as well. The feet, beak, hat, and head are split off from the main body to minimize…

Pobrania
537
Polubienia
185
Ocena
5
P
PrintablesKiwiKid-31

ROG GPU Support

Tired of your GPU sagging miserably? If so here is a solution I came up with. My dad is a big Asus fan and when we built a new PC recently (which I posted on PCpartpicker HERE ) we noticed that the graphics card was sagging a lot. So I…

Pobrania
537
Polubienia
75
Ocena
5
P
PrintablesBimodel3d

GPU SUPPORT (AMD,NVIDIA,ASUS,EVGA,ROG)

GRAPHIC CARD SUPPORT DEVICE OPEN 110 MM CLOSED 64 MM YOUR GRAPHIC CARDS WILL NO LONGER BE WARPED AND WILL BE ABLE TO ADD STYLE WITH THEIR ELEGANT LOOK

Pobrania
534
Polubienia
47
Ocena
5