P
PrintablesVC Design
Mini Gym BenchPress - My PR Bench Press
Link to the platholder and plates: https://www.printables.com/model/1003638-mini-gym-barbell-weight-set-my-pr
- Pobrania
- 1346
- Polubienia
- 485
- Ocena
- 5
Wyniki wyszukiwania: hpr
109 modeli
P
PrintablesD2 Doctor
Simagic HPR Haptic Pedal Reactor mount for Moza SR-P pedals
A simple adapter to fit the Simagic HPR to Moza SR-P and possibly SR-P Lite pedals. Mounts to the back of the pedal and holds the HPR to the back. Requires 4x M4x15 countersunk screws to hold the HPR to the adapter, and 4x M4x10…
- Pobrania
- 915
- Polubienia
- 57
- Ocena
- 5
P
Printablesmikeev
Simagic P-HPR Adapters for Heusinkveld Sprint Pedals (Accelerator, Brake, Clutch)
Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…
- Pobrania
- 809
- Polubienia
- 40
- Ocena
- 5
P
Printablesbroodro0ster
Simagic Haptic Reactor (HPR) mount for Heusinkveld Sprint brake
Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…
- Pobrania
- 436
- Polubienia
- 16
- Ocena
- 0
P
Printablesnhchiu
StealthProtoXtruder 2.0
StealthProtoXtruder 2.0 (SPX2.0) Last update: 2025/08/02 ProtoXtruder 2.0 in stealth mode (low-poly style)! Most things are common between the two extruders. Please checkout PX 2.0 Github repo for details. (BOM, assembling, etc.)…
- Pobrania
- 414
- Polubienia
- 80
- Ocena
- 5
P
PrintablesAVHfidgets&more
AVHprinting fidget star
Enjoy this handy nice print!!
- Pobrania
- 409
- Polubienia
- 19
- Ocena
- 0
P
Printablesthomasfjen
Stealthpress Keybak Replacement Doorpuller
Cheap keybak alternative: https://www.amazon.de/ZDNT-Automatischer-T%C3%BCrschlie%C3%9Fer-Automatisch-T%C3%BCrschliesser/dp/B0BQRGTR8B Even cheaper when buying from aliexpress: https://www.aliexpress.com/item/4001346125084.html 800gr or…
- Pobrania
- 404
- Polubienia
- 58
- Ocena
- 5
P
PrintablesMrTimcakes
VRS Pedals P-HPR Haptic Pedal Reactor Mount
VRS Pro Pedals - P-HPR Mount A sturdy mount using the existing top barrel nut on the VRS pedals. I've included a .3mf project with 100% infill between 4-17.8mm for extra strength. Printed all at once. Pictured printed in Eryone PETG-CF. I…
- Pobrania
- 393
- Polubienia
- 20
- Ocena
- 0
P
Printables__lb__
Simagic HPR Haptic Pedals Reactor Controller Box holder
Be aware it's a very snug fit.
- Pobrania
- 348
- Polubienia
- 31
- Ocena
- 1
P
PrintablesMartin Majewski
Fanatec CSL Load Cell Brake Adapter for the Simagic P-HPR Haptic Shaker
Description Sim racing is cool, but gear is expensive. That's why I try to get the most out of the most affordable stuff and build up my rig this way. Simagic has a relatively open ecosystem and provides the P-HPR force-feedback…
- Pobrania
- 333
- Polubienia
- 23
- Ocena
- 5
P
Printablesanchorman.nz
Insta 360 Pole Holder for the SeaDoo Fishpro
This holder supports the Insta360 Invisible Selfie Stick and can clip onto the Linq System of the SeaDoo FishPro Explore.. Print solid fill With a least PetG or better. Supports have been modeled so you wont need to add your own. PLEASE…
- Pobrania
- 302
- Polubienia
- 16
- Ocena
- 0
P
Printablesrumcajcz
Asetek holder for Simagic P-HPR haptic reactor
Allows you to mount the Simagic Haptic reactor on Asetek pedals. First attach the reactor to the bracket and then mount it on the pedal. No extra screws are required for mounting (to install on the pedal, the screws holding the pedal are…
- Pobrania
- 299
- Polubienia
- 15
- Ocena
- 0
P
Printablesanchorman.nz
SeaDoo ST3 Fishpro Second Battery Mount
This holder has been designed to be glued into the hull of the fishpro. (The photos here are of a larger Lithium battery on my first version of the battery holder.) I have designed the holder to have a large surface area touching the hull…
- Pobrania
- 288
- Polubienia
- 18
- Ocena
- 5
P
PrintablesJohn
SIMJACK UT Brake Pedal Adapter for Simagic P-HPR (Haptic pedals Reactor)
I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…
- Pobrania
- 286
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDiracDelta
Heusinkveld Ultimate+ HPR adapter
There seemed to be no free Simagic HPR adapters for the Heusinkveld Ultimate+ pedals, so I made my own. One model for brake and throttle, separate model for clutch. Designed for M5 Ruthex inserts . Run a long M5 screw through the part…
- Pobrania
- 248
- Polubienia
- 13
- Ocena
- 5
P
PrintablesDomesticHacks
16mm Grow Tent mount for 5W clip fan from Garden Highpro GHP
Since the original mount of the Garden Highpro 5W clip fan isn't really suitable for (especially smaller) grow tents, I designed an alternative one. It can be mounted to a pole of the tent with two zip ties. I additionally put a strip of…
- Pobrania
- 238
- Polubienia
- 35
- Ocena
- 5
P
Printablesc8_h10_n4_o2
Fill funnel for PsychProd's fast in-spool dessicant container
I took the original lid and added an open cone shape on top. For some reason unknown to me, I needed to slice at 101% for good fit, 100% was too tight.
- Pobrania
- 227
- Polubienia
- 29
- Ocena
- 5
P
Printablespeer69
Simsonn Pedals Mount for Simagic P-HPR (Brake / Throttle)
Disclaimer: This model is a WIP, has not been tested in terms of durability and is likely going to change. Throttle Mount: Insert M4/M5 Nuts into the adapter Screw HPR to printed part using the provided metal-mount and screws Screw…
- Pobrania
- 218
- Polubienia
- 21
- Ocena
- 5
P
PrintablesUnreal
Skadis SwitchPro Controller Holder
This tray is designed for SwitchPro Controller. Print with supports
- Pobrania
- 215
- Polubienia
- 27
- Ocena
- 4,5
P
Printablesdavid0n
simagic P-HPR mount - for Fanatec ClubSport v3 Pedals
here is a very simple mount for the simagic P-HPR haptic feedback motors to mount them on the Fanatec ClubSport V3 pedals with the D-pads installed. I used two M6 screws and screw nuts to tighten them onto the pedals, and the motors are…
- Pobrania
- 196
- Polubienia
- 30
- Ocena
- 0
P
Printablesrfourb
Simagic P-HPR Adapters for Heusinkveld Sprint Pedal - No Supports
Just some small tweaks to these incredible adapters to make for easier printing and assembly. Printed in Jessie Elixir PLA on a MK4S.
- Pobrania
- 191
- Polubienia
- 14
- Ocena
- 5
P
PrintablesChris Lee
Simagic HPR Mount for VRS Pedals
Works for both throttle and brake. Suggest to use PETG or ABS. You can rotate it so the wire goes left or right.
- Pobrania
- 179
- Polubienia
- 15
- Ocena
- 0
P
PrintablesDan
Moza CRP2 P-HPR Neo Mount
This is for mounting a Sim magic P-HPR Neo to the Moza CRP2 pedal set. You will need some machine screws (Roughly 4mm in diameter) and nuts to match in order to mount as well as a M6 bolt and locking nut. I printed 2 at 20% infill with…
- Pobrania
- 149
- Polubienia
- 12
- Ocena
- 5
P
PrintablesMNK
Thrustmaster T-LCM Simagic P-HPR Mount
Uses the original hardware. First, mount the haptic reactor, then use the default screws to attach it to the pedals. The faceplate can be slid upward, but this will reduce contact Print it on its side with no support needed
- Pobrania
- 147
- Polubienia
- 13
- Ocena
- 5
P
Printablesmichaelpm91
Simagic P-HPR Neo Haptic Pedal Reactor Neo mount for Moza SR-P pedals
A simple adapter to fit the Simagic P-HPR Neo to Moza SR-P. Mounts to the back of the pedal and holds the P-HPR Neo to the back. Requires 2 x M4x20 countersunk screws to hold the HPR to the adapter, and 4x M4x10 wafer-head low profile…
- Pobrania
- 144
- Polubienia
- 15
- Ocena
- 0
P
Printablesfalcon14141
Stealthpress for Weller WXP80 with a lot of other mods
My own take on Stealthpress mods
- Pobrania
- 138
- Polubienia
- 32
- Ocena
- 5
P
PrintablesAntBlue
Ant test tube nest - Test tube portal - Ahprodite nest
This is an ant nest based on the Wakooshi Venus Nest. It holds 4 test tubes and has a small outworld. For 150mm x 16mm tubes Print the nest and lid at atleast 10% and the smaller parts at more than 30% 0.2 layer height Print the mesh…
- Pobrania
- 132
- Polubienia
- 15
- Ocena
- 0
P
PrintablesKonstantin Radchenko
Kharkiv Derzhprom (Ukrain Landmark)
The Derzhprom ( Ukrainian : Держпром) or Gosprom ( Russian : Госпром) building is an office building located on Freedom Square in Kharkiv , Ukraine . Built in the Constructivist style, it was the first modern skyscraper building in the…
- Pobrania
- 119
- Polubienia
- 34
- Ocena
- 5
P
PrintablesJulian Lemuren
Simagic P-HPR Adatper for Simagic P2000
Ich habe mal ein Adapter für die Simagic Shaker modelliert. Leider habe ich keine bei mir. Deshalb hoffe ich, dass der Flansch passt. Allgemein ist das Bauteil ziemlich straff in der Öffnung vom Pedal. Das muss so! Gebraucht werden 2x M5…
- Pobrania
- 113
- Polubienia
- 12
- Ocena
- 0
P
Printablesanchorman.nz
SeaDoo Fishpro Lowrance FS9 and FS7 Sounder Heads Up mount.
SeaDoo Fishpro Lowrance FS9 and FS7 Sounder Centre mount Bracket..
- Pobrania
- 106
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSeven Sam
Asetek Pagani Huayra R Pedal - SIMAGIC P-HPR Haptic pedals Support adapta
Print no need for support, print with the motor plate on the bed side i printed @ 100%, but 50% it's okay you have to put the screws in before mounting the motor, unfortunately the crankset spacing is barely smaller than the motor Step 1:…
- Pobrania
- 100
- Polubienia
- 6
- Ocena
- 0
P
Printableszeroflow
Stealthpress Keybak Replacement Doorpuller - 18mm
800gr or 1000 gr variant with 63x63mm size. Loosen one barrel to get rid of the loop and tighten again. It fits directl
- Pobrania
- 95
- Polubienia
- 12
- Ocena
- 5
P
PrintablesTHop3D
Mini Benchpress
This model i made is just a small benchpress. It can be assembled with bolts and glue and is a fun gift to give to someone who likes going to the gym. A wooden stick is used as bar.
- Pobrania
- 91
- Polubienia
- 25
- Ocena
- 0
P
Printableskooziecup
Reviung41 Keyboard Highpro Case
Highpro case for the Reviung41 keyboard. Works with the sandwich case with standoffs that I got from https://www.boardsource.xyz/products/Reviung41.
- Pobrania
- 88
- Polubienia
- 12
- Ocena
- 0
P
Printablesanchorman.nz
SeaDoo FishPro Rod Holder Base
I have just created a new product. This cap fits on the end of the FP rod holder preventing your fishing rod from dropping through the base of the holder and damaging your mats.. Easy install.. I have printed with TPU…
- Pobrania
- 77
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDavid Frey
Helzephyr MPR/HPR Model Rocket Builder's Kit
This post is an advanced publishing for the Rockety Forum members. You are welcome to download and enjoy the parts, but I am not supporting them unless you contact me via my build thread on TRF . When I release this model to the general…
- Pobrania
- 75
- Polubienia
- 12
- Ocena
- 0
P
PrintablesAVHfidgets&more
AVHprinting Spiral Fidget toy
I hope you guys enjoy and please leave a like see you next time!!!
- Pobrania
- 71
- Polubienia
- 9
- Ocena
- 0
P
PrintablesReese Boisse
Simagic P-HPR Haptic Motor Mount for VNM Pedals
Bracket to mount Simagic haptic motors onto VNM V1 pedals. Prints without supports Category: Video Games
- Pobrania
- 69
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEndless_Speed21
Simagic Haptic P-HPR for Moza CRP peddles
A set of brackets to mount the Simagic P-HPR Haptic Pedal Reactor on the original Moza CRP pedals. Which only need M4 Nuts & Flat Head Countersunk Screws The brackets are designed to hold the haptics as close to the pedal as possible,…
- Pobrania
- 69
- Polubienia
- 8
- Ocena
- 0
P
Printablesevren.builds
Action Splashproof Speaker (Roseland RS-2oo) Open-Source Redesign
The Action Splashproof Speaker (Roseland RS-2oo) was redesigned to be easier to repair & recycle. It uses the existing parts but the designed is going to be adapted down the line the work with standard off the shelf parts. The current…
- Pobrania
- 56
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRobert Henry
Simagic HPR NEO Mount for HE Sprint Pedals
This is a simple and easy to print adapter to solidly mount your HPR Neo haptic devices to your Heusinkveld Sprint pedals. These print and work well using PLA. I also printed using ABS. 100% Infill is recommended. 50% infill works fine…
- Pobrania
- 55
- Polubienia
- 3
- Ocena
- 5
P
Printablesanchorman.nz
Seadoo Fishpro Garmin Backing Plate
Seadoo Fishpro Garmin Backing Plate for the terminals of the Garmin FishFinder..
- Pobrania
- 53
- Polubienia
- 6
- Ocena
- 0
P
Printablesanchorman.nz
SeaDoo FishPro gx750 black box vhf marine VHF radio Mount
Retrofit the GME Black box VHF Radio to the SeaDoo FishPro. Remove the plastic phone cover inside the glovebox then install the Handpiece mount.…
- Pobrania
- 53
- Polubienia
- 8
- Ocena
- 0
P
Printablesanchorman.nz
Seadoo FishPro Water Pickup
Hi All --- I have published a new 3d model today ready for printing. Water pickup for a live bait tank. This is a simple attachment that clips onto the trim tab with a single bolt to hold it into place. I use the 12mm High-Pressure…
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 0
P
PrintablesShaun Doe
Fanatec CSL LC Brake adapter for Simagic P-HPR (Remix)
Recommended print settings: Use the largest nozzle you have (E.g. I printed it with an 0.8mm nozzle and 0.4mm layers) Use 20% grid infill
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAero
StealthPress Mount for Worx MAKERX Wood & Metal Crafter
Need supports for the upper section. Tolerances were built into the hinge, but may need to be drilled out. Takes a M3x25 screen as the hinge.
- Pobrania
- 52
- Polubienia
- 11
- Ocena
- 0
P
PrintablesRoman Kingsglaive
Simagic Haptic Pedal Reactor (P-HPR) Bracket for Fanatec Clubsport V3 Pedals
Model is basically an enlarged version of the provided bracket, which fits the holes of the plastic pedal. Use screws that came with the P-HPR, and I think it's a m4 nut on the other side.
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBGDglider
Fully 3D-Printable Extension Arm for Philips MG5720 – OneReachPrint
OneReachPrint – Adaptive Back Grooming Extension for Philips MG5720 – no tools, no hardware, just print and groom After developing the original OneReach , I wanted to revisit the design to make it even more accessible for home users –…
- Pobrania
- 51
- Polubienia
- 16
- Ocena
- 5
P
PrintablesGolddragons
3 Inch Rocket Fin Jig / Guides for High Power Rocketry HPR
This is a set of three parts for helping with building your 3 Inch High Power Rocket. This is designed to work with a 3 Fin style rocket, with a 3 inch body tube. This let me epoxy all three fins to the engine mount at the same time and…
- Pobrania
- 50
- Polubienia
- 3
- Ocena
- 5
P
PrintablesNotatiation
Splashproof Rugged Snap-Fit SD Card Storage Box | No Parts Needed | Supportless
A Splashproof Rugged SD Card Storage Box. No Extra Parts needed to assemble, Prints in Place except one the Latch, which you need to Snap in. Make Sure to Print the Seal out of TPU and place it in in order to make the box Splashproof! Im…
- Pobrania
- 48
- Polubienia
- 21
- Ocena
- 0
P
Printablesanchorman.nz
SEADOO FISHPRO SIMRAD NSX3007 fishfinder adapter
FISHPRO Adapter for the NSX3007.. https://www.simrad-yachting.com/en-au/simrad/series/nsx/nsx-3007-ai-xdcr--ausnz-chart/
- Pobrania
- 48
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJulian Lemuren
Simtag Ashley- Simagic HPR Mount/Adapter
Hier eine Option auch die Simagic HPR Shaker an den Ashley's zu nutzen. Der Motor wird mit 4 M4x20 Schrauben wie üblich an dem Bauteil geschraubt und wird dann über dem Pedal arm gestülpt. Danach schraubt man die Pedalplatte wieder an den…
- Pobrania
- 47
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFranchester3D
StealthPress Top With Handle for MGN9 Rail
Ads a handle to the mgn9h version of the stealthpress
- Pobrania
- 45
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJulian Lemuren
Tilton 900 Series Simagic HPR Adapter v3
Hier eine Option ein Simagic Shaker an den Tilton 900 Series zu nutzen. Benötigt wird eine längere Schraube für die Pedalplatte. (ACHTUNG: Das ist ein Zollgewinde!) metrische Schrauben funktionieren nicht! Der Adapter wird dann von Hinten…
- Pobrania
- 45
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJoel
DIY Simagic P-HPR Neo Clone
The $3 P-HPR Neo Alternative After researching what's inside the Simagic P-HPR Neo haptic vibration module, I discovered it's primarily powered by a simple rotary motor with flywheel. This inspired me to create a budget-friendly DIY…
- Pobrania
- 39
- Polubienia
- 10
- Ocena
- 5
P
Printablessuperfell
Mounting bracket for the Simmagic P-HPR on PT-2 Pedals
These mounting adapters hook over the top stretcher/spacer on the pedals and are secured with screws into the side through the pedal arm slot. They won't work if you have the pedal arm up high in the slot. They also won't work on the…
- Pobrania
- 37
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFranchester3D
Keyback replacement 500g door puller for StealthPress
This is the 500g version of the door puller that replaces keyback in the original stealthpress. The force isn't quite strong enough to pull the iron up after you release it, but plenty enough to hold it in place, so it works good enough…
- Pobrania
- 37
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGdeGalleta
Simagic Haptic Reactor (HPR) holder Sparco sport seat
Simagic Haptic Reactor (HPR) holder for Sparco sport seat for belt holes. You need: 4x M3x5x4 Heat inserts 4 M3x12mm bolts I put adhesive foam in between Sparco's stock plastic hole cover and the seat in the outer part for eliminate…
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTor Kramer
Simagic HPR Neo mount bracket for VNM Lite Pedals
This is just a quick bracket I threw together to mount the HPR Neo motors to my VNM Lite pedals. I'm not certain if it will mount to the full-size. It mounts using the screws that fix the pedal faces onto the arm of each assembly.…
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPhilcotigo
StealthPress holder for KeyBak alternative, cable puller
I bought the cheaper alternative to the KeyBak cable puller (see " Retractable device (Budget savvy alternative https://s.click.aliexpress.com/e/_DeHzPFd )" as of 1st of february 2026 ) so I needed a fitting holder for it to mount to the…
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
Printablesgrimmet
Garlic Press Cleaner - Reinigungsstempel für Knoblauchpresse
Just a stamp to clean the garlic press. Depending in the PLA used, NOT dishwasher-proof. ;) Prints without support.
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJoel
P2000 HPR Haptics Adapter with Heatset Inserts
This is an alternative version of the P2000 pedals haptic adapter that uses heatset inserts instead of nuts and bolts. The adapter works for all pedals including the brake pedal, providing proper clearance for full functionality. Designed…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 5
P
PrintablesHK Design
Simagic HPR Adapter Mount for Nuosimulation Evo
Adapter for attaching the Simagic HPR to Nuosimulation Evo pedals. Several variants included: -Versions for 16mm or 20mm M4 countersunk screws -Versions for use with or without threaded inserts (M6x8x8)
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBlissa Studios
TS101 adapter for Stealthpress
I chopped off the long arm and made it so the holder attaches to the stealthpress the same way the adapters that come with that insert press do.
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 5
P
PrintablesMartin Majewski
Simagic - P-HPR - NextLevel Wheel Stand 2.0 - Mounting Adapter
I bought myself the Simagic P-HPR rumble motors but used only one for the brake pedal to simulate ABS activity (see https://www.printables.com/model/976496-fanatec-csl-load-cell-brake-adapter-for-the-simagi ). The other two motors…
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMaWoKo_3D_Druck
Bodum FrenchPress Griff/Handle
ein Ersatz für deine French Press damit du weiter guten Kaffee genießen kannst.
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDrKoko
Stealthpress Silent Mod
Your Linearrail comes with 2 Stoppers to prevent the block from sliding off. In my remix you can use these to stop the gantry in both extreme positions. use the first one in the remixed model to stop at the top position use the second one…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesStreelyDan
Simagic HPR mount for Fanatec CSL Elite Pedals
I created this to mount the Simagic HPR modules to my CSL Elite pedals. These may also work for the CSL Elite V2 pedals but I dont have those to test. Use the countersink screws included with your HPR actuators to mount them to the…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
Printablesdeserr
Centerlock adapter / holder / mount for TQ HPR50 motor magnet
After replacing my brake discs with such that are only available as a 6-bolt version which forced me to use an adapter, the original part of the magnet mount would grind on the frame of my bike so I designed this replacement part with…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesWellHelloThere
VRS Pedals adapter for Simagic HPR Neo rumble motor
Got my self the new Neo HPR by simagic for my rig and couldn't find any adapters for them so I made my own. This adapter works for Throttle and Clutch only. I have an original P-HPR haptic reactor on my brake and I had found already an…
- Pobrania
- 23
- Polubienia
- 6
- Ocena
- 0
P
Printablesmitz
Simagic HPR NEO VRS v2 pedals mount
Simagic HPR NEO VRS v2 pedals mount - the neo haptic wire is now hidden behind the mount, front facing plate made smoother, adjusted bolt hole being (oval) Infill 20 should be enough. Made for throttle and clutch, but works for brake too.
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesVeszmadar
Rugged Moto tag splashproof case
Works well, but reduces the range where i can hear the beeping. BOM: 4x M3x12mm countersunk head screw (10mm works too) 4x M3 nut (there is space for self locking nuts) 38x2.5mm O-ring (i used these string silicon sealing, where you have…
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLaisch
CNC Z-Touchprobe
A Touchprobe for CNC in normally open mode made from an PT31 plasma cutter electrode and nozzle and a spring. Can be mounted directly into the spindle for Z-probing the workpiece surface. Since the isolator part between the electrode and…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesInfinityMakes
RKHPR Counterweight
Print at 3 walls and 96% infill
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLukass
Benshpress dumbbell holder on wall
Just a holder on the wall carry around 15 Kg PETG Category: Accessories
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
Printablessp_cecadet
Simagic pedal shaker(pnp-hpr) to thrustmaster tp3lc pedals
Mount your Simagic shaker to your thrustmaster tp3lc pedals No nuts or threadserts needed. Uses included shaker hardware. Attach the printed part to the shaker using the shakers included adapter plate and hardware. Slide the mount over…
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
Printablessp_cecadet
Sim magic HPR PSU holder
Sim magic HPR PSU holder holds psu.
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 0
P
Printablesgyoung23
Retainer for 54mm High Power Rocket (HPR) motors.
Retainer for 54mm High Power Rocket (HPR) motors. The threads are interoperable with the 54mm Aeropack retainer. There is a solid version of the cap which can be used to plug the motor mount tube or mask off the base when painting. The…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMareIngenii
Simagic P-HPR Mount for HE Sprint Pedals
I needed a reason to fire up Fusion and print something, so I created these mounts to connect my P-HPR actuators to my HE sprint pedals. This is designed to use the countersunk screws that come with the P-HPR and re-uses the M4…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
Printablesdefuxn
Bottomplate for the Stealthpress Zero
Bottomplate for this https://www.printables.com/model/869368-stealth-press-zero-small-footprint-heat-set-insert
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDrgigaherz
Aprilia RSV4 Crashprotection EC2.0 connectors frontfork
I've had 2 crashes now on track. Both times the vulnerable connectors were destroyed which can be a pricey replacement. I printed these parts lying down with PA12-CF with 4 perimeters and 50% infill 0,1 layer height, support needed i…
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJustin Davis
Meshpro Anti-Spill Ring
This is an anti-spill ring for the Freemax Mesh Pro atomizer with the bubble tank installed. Version 4 is 11.50mm radius and fits very well. Version 5 is 11.25mm radius and is for those that like a snugger fit. You do not have to remove…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRandakan
Benchpressy
Do you even bench(y)? (Arms taken from: https://www.thingiverse.com/thing:3397529 )
- Pobrania
- 11
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMV
Power Supply Holder for Stealthpress 1 S from
A holder that attaches to the Left rear leg of the Stealthpress 1S from @IconicFAB, to house a power supply. I have both a PineCel and a TS101 soldering iron attached to the Stealthpress and wanted their power supplies handy. This is a…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesStudi_Ha
Kaffesatz Entsorger Trichter und Filter (Frenchpress, Bodum usw.)
Wie bekomme ich den Kaffeesatz aus der French Press? Nehme ein herkömmliches Küchensieb und gieße den Inhalt der French Press hinein – vorzugsweise über deiner Spüle. Das Wasser fließt ab und du kannst den Kaffeesatz im Sieb in den Müll…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesVašík Dohnalík
benchpress wireless charger
benchpress wireless charger for IKEA charger LIVBOJ with accessories as barbell, dumbbell and bumper plates Printed with PLA infill 10% printed on Creality ender v2
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRain
Lebois SRT v10 mod for Simagic P-HPR
In order to moung P-HPR or P-HPR GT rumble motor you need to print Body1 and base lever. For assembly you will need: M4x20 DIN 912 screw, 1 PCS M4x10 DIN 912 screw, 1 PCS When you are doing assembly, do it in following order: 1. install…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 5
P
Printablespointer4
Simagic P-HPR to Racewerk S1 pedal console
You will need two M6 bolts (30mm) and nuts per pedal. I hope the pedal's milled design hasn't changed during production, and that the special pattern fits other models as well, it just fits a little tight at first. v2: When printing from…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printablesheartprinter
Flachprofil-Adapter
Square with 150x70mm (external dimensions) round with 95mm outer diameter 2.4mm wall thickness 230mm height
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDozSmith
VACTechPro F02 Ultra tool holder
Bracket to attach a single, or 2 of the tools to the lower part of the wand on the VACTechPro F02 Ultra. Will require 4x M3 screws and ideally heat set thread inserts. (the hole has a 3mm section that will accept a screw but it will be…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablessiManthrop
Simagic Haptic Reactor Adapter for TB-RS Handbrake - HPR NEO P-HPR
Simple Adapter to mount any Simagic Haptic Reactor on an Simagic TB-RS Handbrake. Used Screws: - 2x M4x12 - 2x M4x18 - 2x M4 Nuts
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJames79
DAAM/RAM/HPR parts and such
1st stage to body, and body to can gaskets are only a stopgap for when rubber and nylon ones are unavailable. Print in TPU, and the 1st stage gasket is very sensitive to over-torque. Mouthpiece plug is for the USD curved mouthpiece. Older…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesjizichun13
IQair HealthPro Plus Top lid filter hold down clip
its the clip that holds down the top filter located on the top lid, they are removable and mine recently break so i designed this one with thicker peg than original. Printed using PETG on XL and it come out great
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesjannis
BENCHPRESS TROPHIES
benchpress trophies 135lb (60kg), 225lb (100kg), 315lb (140kg)
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMarkusLaumann
SV08 toolhead board adaptor for StealthProtoxtruder 2.0
I was looking at 3D-Printsolutions' SV08 Lightweight Toolhead Mod (LTM) and thought I could keep from extending all the original toolhead wires if I mounted the board as close to the original position as possible. The StealthProtoXtruder…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesWupper1988
TQ HPR Remote Schelle
Habe die Schelle mit einem Resin Drucker gedruckt. PETG geht auch, ist aber schwierig mit den dünnen Stegen welche die Knopfgummis Halten.
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablessiManthrop
Simagic HPR Adapter for Shifter with 12mm Shiftlever
Simple Adapter to mount an Simagic HPR, HPR-GT or HPR-Neo on the Gearshift Lever, in my Case an Lebois SRT V10 Gearbox Gear Shiftlever needs an diameter of 12mm. Bolts needed: 2x M4x18/20mm 2x M4x 10mm 2x M4 Nuts Please be aware you need…
- Pobrania
- 4
- Polubienia
- 3
- Ocena
- 0
P
Printablesstoni
Frenchpress Coffee Ground Filter
I don't want the coffee ground in the kitchen sink, so I did this model in the prusa slicer only for my frenchpress :) Check if the infill for "Netz" (=filter) is at 95% or maybe more.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMuffex
Fanatec CSL LC Brake adapter for Simagic P-HPR (short)
Recommended print settings (mostly copied from @ShaunDoe): PETG Use a large nozzle (e.g. I printed it with an 0.8mm nozzle and 0.4mm layers) Use 20% grid infill
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0