824 modeli
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of…
*** New case for Raspberry Pi Touch Display 2 *** Required models from 7" Touchscreen case for Raspberry Pi 4 + internal fan Display case >> rpi4-display-case Stands >> rpi4-stand Fan mount >> rpi4-fanmount Print instructions See 7"…
This enclosure fits a (video) doorbell transformer that uses a DIN rail. Not always there is enough room left in a fuse box. This box/enclosure, has a 35mm DIN rail inside and has fits a double width DIN module. You can print it without…
The Bakugan Attributes are representative of the Bakugan's elements. These have internal slots for 6x3mm magnets. Use your slicers multimaterial painting bucket fill function to add color. Included FreeCAD file includes all of the…
Tactile image of internal fertilization. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in Braille). To break…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
This is a collection of knobs i designed for M2.5 to M8 screws. I use them in my designs to adjust screws without needing tools. Those knobs are designed for standard internal hex screws with cylinder head. The head dimensions are…
My AMS started to fail when loading/unloading filament, i discovered that this little piece broke, so i asked my colleague to model it. I just installed it in my AMS and works just fine :) I hope i could help you if you have the same…
A very small pc with internal components. The .STEP file is included if you want to create your own components for it. Print with resin for best results. The side panel is optional and can be printed with clear resin You can get a…
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
Internal recirculation air filtration duct for AD5X. This model use the same 24V 5015 fan/blower model as the one found on the toolhead with 4 wires. This allows PWM capability and interchangeability. The mod help reduce fumes and…
Before you grab this one, check out v3.6 . v3 of the internal spool holder. For the most recent compact version with a truncated end stop, I've added 2mm of length. This will work fine for anyone with a 7.5mm spacer or larger. It will…
Mount up to 6.5 cm wide 1 kg spools inside your Centauri Carbon. Print two each of the 5 mm vertical and horizontal spacers for the right-hand wall. You may fit the spool without removing the studs but that will require that the bed is…
Replaces the original threaded version with a ¼ turn twist lock. Moves the spool up slightly and offers reduced rolling resistance for smoother filament feeding. Works with 51 mm center diameter spools Will take a spool up to 65 mm wide…
A 45mm or so long duct to connect the QIDI Q1 Pro's print chamber 60mm internal fan to the vent at the back to allow hot air to escape without heating up the electronics. The original idea was based on the model below, only as I have my…
I have just added a new STL file called washer, this can be placed between the engine case and the handle to remove excess play. All parts are pre oriented and print with no support material. Very nice drawing to see how 2 stroke engine…
HIVE Filter – "High Efficiency Internal VOC Eliminator" for the Core ONE / + Internal Particulate Filter + Activated Carbon Filtration for the Prusa Core One, designed to scrub chamber air without dumping heat ! The HIVE Filter…
READ THIS TO BETTER UNDERSTAND THIS MOD BEFORE PRINTING This mod needs you to flip the IR sensor connector so be ready to swap cables as described below. You can damage the sensor if you will not follow these instructions. Updates at the…
Why I modified the model: I noticed the internal corners of the follow-me eye blanks in some fursuit heads are fairly noticeable, if the eye blanks have hard right angle internal corners. What I modified: I added 80mm radius rounded…
When performing air spring maintenance on a Fox fork, Fox specifies part number 398-00-657 Tooling: Bullet, Sealhead To Shaft, FLOAT NA 2 This tool can be really tough to find, even when you work for a bike retailer. So... 3D printing to…
Finger tip mouse with Orochi v2 internals with magnetic rechargeable battery. **Side buttons are made to be mounted upside down. Please look at photos for reference. You will also need to swap the side buttons in Razer Synapse to match…
This is meant as silencer/suppressor replacement for SPA PP750 cal. 5.5 mm internal suppressor. I accidentally lost the originals, so I did this one. I've also put cotton wool outside the K-baffles, works better than original imho. Each…
Since the original had a few sharp corners and edges that were a bit tricky to clean and got some dirt and alge stuck in, i've changed the geometry slightly Printing Just flat on the build plate, no supports needed
Update: 09.06.24. Installation guide added. Update: Also see my new Libra & Trigger Extruders that uses Orbiter internals. By popular request, new threaded insert mounting version. Also see original version here:…
When using an ethernet adapter instead of Wi-Fi on the Qidi Q1 Pro you need additional space for the USB cables, by moving the fan slightly on this mount and providing space for cable passthrough, the needed space is easily available.…
Simple bike cable clip based on clips from Moustache ebike.
A very small pc with internal components.
This is a modified version of Synthetic Electron 3D's Internal Spool Mount design. I added 5mm to the spacer to give the spool more room and keep it farther from the print bed. With this change, you can also remove the spool without…
Case for a Raspberry Pi 4 Features VESA mount (75mm x 75mm) Internal fan mount (40mm x 40mm x10) - optional Thread inserts (case and pi mounts) Footer pins - optional Required parts Raspberry Pi 4 Optional parts Fan 40x40x10, 5V → Noctua…
Before downloading this version, check out the new much improved single arm version that rotates and tilts, available in my other models :- MT ROTATING MODELING PAINTING VICE by Peter Martin | Download free STL model | Printables.com…
update 02.06.2020 I corrected files in the download section. Now they are correctly a cover and a bottom, and not just two covers. Thanks to David Ewen for letting me know ! __________________________________________ This is an…
Allows you to connect HSW elements in angles. Includes a section for a large plate with 11 cells and one element that can be cloned as many times as you need.
Internal spool holder can fit spool up to thickness of 80mm. Two version, 2 piece version with the swapable cap to enable fitment of thicker spool or different size spool hole. Attached via m3 heat serts. Reverse bowden holder is attached…
I accidentally uploaded a wrong STL for the button. Its now updated! I purchased a 18650 capacity tester from AliExpres
Case for a Raspberry Pi 3 (B/B+) Features VESA mount (75mm x 75mm) Internal fan mount (40mm x 40mm x10) Thread inserts (case and pi mounts) Footer pins optional Required parts Raspberry Pi 3 (B/B+) Fan 40x40x10, 5V → Noctua NF-A4x10 5V…
Twelve zodiac talismans, inspired by the Twelve Talismans from the Jackie Chan Adventures. Each talisman has internal 6x3mm slots for inserting magnets by pausing mid-print. You can buy a set at:…
For those who want to print RedCowls fantastic xshot-longshot-half-dart-magwells but don't want to sacrifice the original magwell internals. Simply print the slide and two of the locks, put in a spring (I took a spring of a broken pen and…
This replaces the prime/purge tower and poop chute in your Centauri Carbon. It is designed to work with the hardware that is mounted on the OE component. Also included in this 3MF is the removable bin and panel cover. To install, you will…
https://en.wikipedia.org/wiki/British_Standard_Pipe This is for common British Standard Pipe (BSP) or G style pipe threads for checking either male or female threads. There are two separate gauges for checking smaller or larger threads.…
Overview This collection of Gridfinity bins all have manget inside the print so you don't have to use glue. There are sizes from 1x1x1 to 5x5x6. If you want to make a different bin size not included in this model use my Onshape Gridfinity…
SUMMARY This internal filament guide set works with X-Max and probably the X-Plus. It replaces the simple OEM vertical guide with a 4mm ID X 6mm OD PTFE tube that runs from the spool to the extruder. There are four parts: Upper Guide,…
After I upgraded my Ender 3 Pro extruder to a Micro Swiss Direct Drive, cable management became an issue. Thus, I decided to embed all cables from the extruder into a cable chain and lead them to the rear-box, where the controller board…
FILES UPDATED A standard internal 3.5" Gotek case with 0.91" OLED display window. You should be able to re-use the original Gotek screws with this design. I had just hot glued the OLED screen in place. Print Settings Printer: Da Vinci 1.0…
This spacer pushes out the internal PSU cable on the Fractal or Terra (not tested) cases. Some coolers (like NH-L12) do not have the clearance to install internal power cable. Also opens a bit more space in the bottom of the case. The…
Update: Also see my new Libra & Trigger Extruders that use Orbiter internals. There is now a threaded insert mount version in addition to this one, see link:…
This is implementation of Bondtech feeder with Prusa internal filament sensor (IFS). You need extend some holes with roamer 3 mm and thread M3, M2 (for filament sensor) and M6 for fittings. Older version without filament sensor
This model will allow you to enable internal carbon filtering Preface - You need to install the Klipper firmware (link below) - use the auxiliary cooling port I used a 12v Sunon 5015 for its excellent quality and silence, but to do this I…
Modification of Synthetic Electron “internal spool holder v3” adapted for enabling spool quick change (similar to the “Quick change” remix performed by TB for Synthetic Electron “internal spool holder v2” ). Can handle spools up to…
Motivation I recently purchased a P2 Laser Cutter and AC Infinity 6” Inline Duct Fan intending to attach 4” ducting to the inlet side. But the outlet of the P2 was too small for 4” ducting. Additionally, the weak stock internal fan would…
This is a reinforced internal 90° connector for 2020 V-slot aluminum extrusion profiles . It fits snugly inside two intersecting profiles, joining them at a perfect right angle (90°) with a secure snap-fit / friction-fit connection . This…
I made this model to use on my homelab Ive redesigned the front of the case to accept fans so no longer used the original front pannel and needed a caddy which supported 4 2.5" HDDs but was shorter to not poke out of the case The caddy…
Semi Closed Cable Drag Chain, 49x21mm internal, 59x27.5 external. The links have an integral support that will need to be snapped off and thrown away after printing. The standard link cap somewhat restricts the internal space when in the…
I wanted to connect my xTool F1 to the inline exhaust system I already had in my shop. I wasn't able to locate one specifically for the F1 so I went ahead and designed and printed one. This adapter connects to the xTool F1 and allows a…
Update November 1, 2022 The internal spool holder has been updated to version 2.3. Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs…
CLICK HERE FOR THE ASSEMBLY GUIDE
I have recently found a few issues with this model, and have plans to redesign. Why ? What I found is that some of the filaments push back into the MMU after an unload. This causes filament to poke out into the path of the selector,…
Replacement internal winding wheel for an Airsoft speed loader. Printed on a P1P using Esun PETG 0.20 Strength Profile Layer Height - 0.02 First Layer - 0.2 Walls - 6 100% Infill
Drop in baffle system with airstripper and end cap. This is similar to the style used by Benjamin for over 10yrs. Source a 20mmx30mm spring to place between the airstripper that goes over the end of your barrel and the first cone in the…
Credits to ElectraFlarefire for the original model. I noticed that, after slicing, the wall between the mounting holes and side walls of the original model was too thin and could possibly deform so I made the sides a little thicker. It…
Simple Spool Holder to install the spools inside the printer. This makes them more easily accessible, saves space behind the printer and allows you to immediately see which filament is loaded. I decided to make use of the two individual…
I always had trouble scooping out the little filament waste bits that fall off the printer plate in my X1C. I made this simple extrusion to brush the detritus into into the bin at the front of the base inside the printer. Simply brush the…
ZA13-c wireless mod with Dragonfly F1 internals using original top shell. You only really need two screws and a 3D printer complete this mod. You might have to trim down the battery JST connector a little bit to get the Side button holder…
If you are like me and dont have space in the back to either collect the purge in a bucket or make it reach around to the side or bottom to collect it there then this might be for you. Add capability to purge into a internal bucket that…
A simple cable stop to enable fully internal mechanical cable routing on the Cannondale SuperSix Evo. The holes for the cable end are designed to be slightly undersized and should be reamed to fir the ferrule that you are using.
EDF printed because the original one was a little bit too small Internal dimension is 65mm instead of 64 to prevent rubbing but I see some space between wall and propeller, so I think it can be lowered about 0.5 and still fit without…
A 1.9" 12mm hex RC rim that uses an internal beadlock design to clamp the tire to the rim. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: R/C Vehicles Instructions Use support to print the main rim…
Description Hi everyone! This is my custom 3D printed enclosure for the BC-250 mining card / Bazzite gaming pc. I designed this because I wanted a case that fully encloses the board along with the PSU, rather than having parts hanging…
NOTE: For an easy upgrade path to the STM32 Blackpill build print the Gaggiuino Component Housing and Gaggiuino Optocoupler Case (for GC) instead of this. The housing was originally designed for M2.9x6.5 self-tapping screws. These are the…
A rugged storage case, 225mm x 125mm x 75mm internal volume. Print in materials of your choice, though the gasket should be a soft material, such as TPU. The corner bumpers can be printed in TPU or a rigid material, and secured in place…
Mitsubishi Carisma internal door handle replacement based on 2001 model. Its designed for left side doors. For opposite ones just mirror the part. It has additional 4 holes for screws, instead of default extruded material pins. It is best…
Printable block off plates for the standard AD5M model to help trap heat efficiently with the enclosure kit by FlashForge.
Printed in ABS with the settings included in the project file. Its designed to fit on the loose end to prevent the clips from breaking on assembly. Can print with no support, but the layer lines are not ideal, so you may want to print 2-3…
Quick change internal spool holder. Use Synthetic Electrons quarter turn end piece from the original.
UPDATE: Added versions of the ‘top-left-no details’ and ‘top-right-no details’ without the red details NOTE: please see print settings section for details if you have trouble fitting it on the bed General: This is an 8-button full-sized…
Custom-designed velocity stack / intake funnel for 2-stroke carburetor setups – originally developed for a Wartburg engine. Printed in flexible TPU 82A for vibration resistance and durability. The internal helical spiral guides airflow…
Dear friends! Use my simple program to create Easte egg with your photo. Just upload your photo and the app creates an egg with lithophany on internal surface. Use a flashlight to see the photo. Here is the link to download the program:…
I loved making this model when I found it on Thingiverse, and saw that the original creator did not reupload it to Printables, so I decided to do it myself, giving full credit to the original creator of this model ( 3DPrintedDream ). The…
Overview This collection of Gridfinity bins with curved lips all have manget inside the print so you don't have to use glue. There are sizes from 1x1x2 to 5x5x6. If you want to make a different bin size not included in this model use my…
Tlumič výstřelu s vnitřním závitem M12x1
This spool holder allows you to store the filament inside the printer , between the door and the print plate , making efficient use of the available space. This setup is ideal for hygroscopic materials , which quickly absorb moisture.…
If you don't have enough space next to your printer to change filament, like me, this is the solution and will allow you to put another printer right next to it without the need for a gap between them to insert filament. There is no need…
Available for purchase on my Etsy store. Hook tool for gathering shift and brake housings when dealing with Trek's Control Freak internal cable routing. Very likely useful on other brands' internal routing as well. Push all the housing…
305mm between verticals. Not sure how to convert bambu studio file with negative modifiers to STL with the modifiers still in place, so yea.. STL is the version with no sliders, the 3mf file can be sliced in bambu studio, and will let you…
The original model was off on the mounting positions for the chute flap and chute flap arm causing two issues: The flap to hit the front of the chute and not allow the arm to go back far enough when pushed by the print head. When the…
Internal ELRS antenna mount for the Radiomaster Boxer using a simple 2.4Ghz EP1 T style Receiver antenna. Doesn't this ruin the range ? It's hard to quantify but you can expect a reasonable 10% drop in signal strength compared to an…
Turning knob 35x15mm for an M5 screw inside and outside the nut Drehknopf 35x15mm für eine M5 Schraube innen und außen die Mutter
Replacement wheel The original wheel for the Elegoo Mercury X Washing Station was badly designed and people often had the plastic crack due to the stresses caused by the set screw being too aggressively tightened. This print can be…
For those who are frustrated with the low light inside the BambuLab beast, and don't want a big and ugly square thing on the top of the glass, here is my solution. It fits the metal sheet of the frame, just above the front door. It won't…
Internal magnet Remix of @benp_1165147's remix of @EnricoPulvirenti version with internal magnets. Thinner version There is also another version which is thinner (not as deep). Print settings Pause to insert magnets Pause at beginning of…
CLICK HERE FOR THE ASSEMBLY GUIDE
I designed a internal corner for a skirting board. The corner is made for skirting boards with a high of 57 mm and a depth of 15.5 mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2…
It's a dice tower. It has an internal spiral stairway. It's very loud. Print without support (because you won't be able to get them out). Make sure your overhangs are dialed in and print with layer height of 0.15mm or less.
This model is compatible with the lego system.
Inner poop bin for the centauri carbon
I made this remix from a great idea to change the camera angle: https://www.printables.com/model/935713-bambulab-p1sp1p-better-internal-camera-angle Due to the short cable, it was not possible to install this holder properly. So I drew…
This is a rear electronics enclosure for and Ender 3 Pro, modelled for the specific purpose of containing the MCU using a standard Creality board footprint, a Raspberry Pi with its standard footprint, a random buck converter that I had…
Made this to close up a PVC stormwater drain pipe - It had a 110mm OD and this is flush mounted internally with a lip to match the OD of the pipe.
Used TPU so solve the problem of not enough grommets that came with a new frame. This could potentially work for other frames if it is scaled up or down in the slicer.
