100 modeli
Updated models of a slightly larger size have been added for a tape width of 25 mm. An experimental mounting option between the two halves of the case is also being tested. BOM: 7x M3x10mm SHCS/BHCS 7x M3 Nuts Print Settings Rafts: No…
10" Server rack 1U panel - LS1008G TP Link switch Designed 2021-08-08 thing:6195220 printables:568385 TOC 10" Server rack 1U panel - LS1008G TP Link switch TOC Summary Description Buy me a coffee? Summary 10" Server rack 1U panel for…
[Update 7th of May 2025]: Fixed the fitment issue for the switch, and also made a cutout hole for the Raspberry Pi 4's SD card slot.
This is my version of a vacuum adapter for Makita chop saws, to be able to connect the vacuum to the fixed part and not to the moving arm as with the original adapter. You also need a cover for the upper part, but this is already…
2 1/2" OD dust adapter for the side dust port of the Makita LS1219L 12" Miter Saw.
The front cover alignment tool from the LS essentials pack didnt work for me as it was too large in OD so I designed and printed my own to suit my LS1 from a Holden VY SS Commodore. I added a radius to one end to help with insertion onto…
Holder made for TP-Link LiteWave LS108G to be mounted in standard 10" rack. Switch can be mounted with screws thru standard wall mount holes but does not need to. Fits pretty tightly. Printed facing down and at 45° because of small bed.…
I measured a bobbin included with Brother LS14S and made a print compatible version from scratch. If you want to use it with your other machine, this bobbin is 20.5 mm x 11.0 mm with 8.70 mm outer diameter shaft and 6.50 mm hole. You…
I created this remix so that I could connect both dust ports together into a single adapter which could connect to a 2" shop vac. Remove your old part, unscrew the hose from the blade guard and screw it into the new part. Also, insert the…
This is a tray made to hold valve lifters and pushrods from a Chevy LS engine. Useful during tear down and rebuild process to keep lifters in proper order so they can be returned to the same bore/cam lobe. This was original work on my…
This model is to mount a LS1 ECU under the seat of a car when doing a LS! engine swap. The design is to keep ECU away from engine heat. You will need to print 2 of these one for each side of the ECU.
Overview The default Makita LS1219 comes with a (stupid ?) vacuum hose adapter, which plugs into the top handle, which is a moving part. (This is not the case on the smaller LS1019 ). The vacuum adapter for your shopvac is also bulky.…
I wanted something which fits exactly in the cutout of the Dometic LS100 ventillation grille. As there is only little space between the cooling fins and the Ventilation grille at my caravan, I needed a solution for 15mm fans. While…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Original Makita bypass is for easier connection to the vaccum hose of the LS1219 / LS1219L / LS1019 / LS 1019L by @Tobi Höher. https://www.printables.com/de/model/559368-makita-ls1219-ls1219l-ls1019-ls1019l-vacuum-adap This model is a…
Instead of spacer with longer screws - adapter that's not that much longer, but well optimized for better clearance.
en This mount allows the TP-Link 5-Port Gigabit Switch LS1005G to be easily installed in a 10-inch rack. de Mit dem einschub lässt sich die TP Link 5 Port Gigabit switsch LS1005G einfach in einem 10 Zoll Rack montieren.
I am doing an LS1 ZF8HP70 swap into a BMW E39 and wanted a mock up motor and trans to make initial test fitting a lot easier. Refer to my other models for the LS1. I found a good quality 4WD trans scan and some partial scan data of a 2WD…
I designed this insert to be heavy-duty; it has an internal support—designed to be printed solid—that surrounds the kerf cut. Print this as an assembly to retain the ability to print the support part as a solid inner piece. Enjoy! Print…
I needed a better solution for the dust colleciton on my Makita miter saw. First and foremost I wanted to move the connection point from the top, sliding portion of the saw down to the bottom and I also needed the ability to connect a…
Miter inserts were all chewed up, so I designed new ones as close as I could to the original. Should be easily modifiable if you want to try 0 clearance insert. To connect the two pieces, I had played with the idea of a puzzlepiece-like…
I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…
Ich habe den Adapter für meine Makita DLS211 erstellt.
I got one Switch TP-LINK LS105G and to put under the table I checked different options but none fits my needs, so I designed this one that need two screws and hold it nicely under the table without limit the airflow for cooling. Printed…
Tp-link LS1005G Switch mount flat head screw version to screw onto something
Tp-link LS1005G Switch mount for sticking somewhere
This is fit for tp-link ls1005g, so fit i need to trim small feet on the switch to get it in.
I tried my hand at designing a zero clearance insert for my miter saw. It took a lot of test prints and refining the model but eventually I got there. This model can print on a single plate and then slides together using the dovetails. I…
This is a replacement dust port for the Makita LS1219 Miter Saw (12"). The stock adapter is sized for a 1.5" (40mm) hose. And the way the stock port is configured, you cannot place the saw up against a wall without pinching the hose. This…
Couldn't find a zero-clearance insert for the LS1019/LS1019L here so I made one. I've included the STEP files in case you want to make any changes to it yourself, up to you. I've modeled the rail supports as well, so it should hold up a…
Cover for the plugs on LS1 Delphi PCM P01 and P59. Printed with no supports in PETG on my heavily modified SWX1. Category: Automotive
I made a zero clearance insert for the Mikita LS1220 miter saw.
To secure your switch just push it inside and block it with clips on side walls.
Tp-link LS1005G Switch mount to screw on to something
All original design credit belongs to the creator — this is a personal modification and sharing only. (dmrn210) This is my personal modification of the original SLS10 slingshot: I extended the fork tips and added pass-through holes,…
My set of useful gadgets for the Makita LS1040 miter saws. Preffered filament ABS (for duarbility). ls1040n_dustport.stl - angle adapter for 35mm Makita hose. 1040_clamp+30.stl - 30mm extension for vertical clamp 1040_clamp+50.stl - 50mm…
After getting the enlarged DC/DC Converter shared in pemphillip's Addendum V2, I saw that the larger footprint of that board did not fit in the existing cover. To make it fit and not have to cram everything into the opening haphazardly, I…
My first model!! A new dust port to be able to connect a 50mm dust hose, at a 45 degree angel to the top port of the saw. This way the hose has a bit more freedom to move when the saw is turned.
Adapter to connect a Craftsman shop vac to a Makita miter saw
I have designed here a vacuum cleaner connection for my Makita LS 1219L. I hope this adapter is also helpful for you. Dimensions for vacuum cleaner: inner diameter 48.5mm outer diameter 54.5mm if you want to keep me awake, feel free to…
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
You must print two of the same file, one for the front one for the back of the switch.
It allows replacing the bag with a vacuum cleaner. Glued. I recommend cleaning the supports well. *At the knee there is a variable layer height from the groove. The counterpart is at the address…
Ce modèle est un bras robotisé 5 axes conçu pour être entièrement fabriqué en impression 3D FDM et assemblé avec des composants standards facilement disponibles. Le système permet des mouvements multi-axes adaptés à des applications de…
Adapter Makita LS1110F to Karcher
I had combined LegendaryCheez's two parts into one to be printed on larger printers (Creality K2). This also fits Makita LS1013 as well. Print solid (infill 100%) for best results.
Festool LS130 Pad for do-it-yourself profile Based on thing 5758301 by 3dprintedworkshop, this one is solid flad for easier gluing to a foam pad. Don't install/remove by pressing down on the back of the release spring pad, the clips will…
First, unscrew the extraction nozzle from the hose. Then, screw the 3D-printed adapter onto the hose. Remove the counterpart from the machine (by loosening the screw). Finally, insert the printed adapter together with the suction hose…
Are your Corsair LS100 light strips falling off your monitor because the adhesive pads for the magnetic mounts can’t handle the heat? Simply print a couple of these and add your own adhesive pads/tape to distribute the load. Provides the…
Corsair LS100 lighting strips can add nice ambient backlighting to your monitor. But the starter kit only comes with one set of magnetic tape, so if you get a new monitor, you'll need another way to mount your lighting strips. I tried…
This is made by me and my dad for a LS1 if you would like to move it at all this is the way to go.
English version : Reproduction of the Corsair LS100 box, compatible icue with an arduino pro micro. You will need : 3 pin female rgb ws2812b connector DC jack connector 5.5 x 2.1 an arduino micro pro push button…
UPDATED This is the v2 of my dust collection for a Makita LS1013 miter saw. The previous version had you cut the kerf in the lid and the base was carpet-tapped to the saw. This version is screwed to the saw and has a kerf already in the…
The simple cover for TP-LINK to mount on the wall.
Simple design to mount led strips in three different directions. Convenient because the connector these LED strips come with, connect directly to the Octopus MCU RGB input. Print with your prefferred settings. I used 3 perimeters 0.2mm…
I modeled this up for a friend of mine awhile ago based upon the dimensions he provided, which were found by scouring various internet forums for information. No warranties or guarantees, but he had one machined that he tested and it fit…
I am doing an engine conversion and needed to be able to start the motor on the engine stand. Whipped up these parts to be able to nicely and easily mount everything to a sheet of MDF and to be able to use the 20L gas can that I had as…
Description: 3D-printed support designed specifically for the TP-Link LS1008G , fully compatible with the IKEA Skadis pegboard system. It features built-in clips that make hanging the switch easy and tool-free. The design ensures a…
I recently purchased a tp-link gigabit switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting. The bracket model is one piece, which should…
Makita LS1018L Kapp und Gehrungssäge Einschaltsperre. Bei Benutzung der Kappsäge kann es durch das Vielmalige drücken, der Einschaltsperre dazu kommen, das dieser Knopf bricht. Hier habe ich einen Ersatz konstruiert, der sehr gut…
Since my dust collection tube of the Makita chopsaw LS1019L broke. Due to someone tripped over the vacuum hose that was connected to it. Why buy a new one when you have a 3d printer ;-). This version has a larger wall thickness than the…
I'm restoring a Makita LS1040 Compound Miter saw for a friend, which also needed the kerf boards replaced. These fit the LS1040. Many other/newer Makita saw models have screw down kerf boards which seem like a better design than this.
Frame to adapte filter M210 filter to LS1 vaccum. Sorry for the picture, I printed the part in clear PETG :)
10RackCore 10-Inch 1U TP-Link LS1008G Switch Mount + Storage Drawer This 1U rack mount was designed to install the TP-Link LS1008G 8-port unmanaged switch inside a standard 10-inch rack. Because the LS1008G only occupies part of the…
Adapter for our Lefant LS1 robot vacuum to use replacement vacuum filters designed for the M210 M210B M213 M210S. I couldn't easily find filters for the Lefant LS1 vacuum so I made this adapter to allow me to use the filters from another…
This is a tool to help tighten or loosen an oil filter. This is approx 74.5 mm and has 15 flute.
This remix of Clifton McMorris' (@CliftonMcMor_1416112) model has several key improvements: Solid kerf cut area in the middle of the print provides a clean and dense area for the sawblade to cut the initial kerf Increased height (scaled…
TP-Link LS108P Wall Mounting Strap A minimal strap-style wall mount for the TP-Link LS108P 8-port switch. The device sits flush against the wall while the strap holds it securely in place with two standard drywall screws. No adhesive, no…
Just a simple adapter installed in place of the original one. Designed for The RYOBI® HP Brushless Plunge Saw RPLS18X
There is not much to say about this model. It holds 4 LS14520 Batteries and works with the gridfinity system. If you need a bin in a different format, just send me a message.
Mount your Klein BLS18 Hex Keys on your vertical openGrid panel. Uses two directional snaps for additional strength. I printed using Elegoo Rapid PETG, 0.6 nozzle, 0.20 mm layer height.
This is a printable version of the magazine used by the Light Storm LS1. It holds 5 darts, and feeds just as smoothly as the original magazine does. This project requires the following hardware to be assembled: 1 constant force spring,…
Bracket for mounting the TP-Link LS1005G switch with 2 screws. It's recommended to use double sided tape.
Mounting board for the TP-Link LS108GP GB PoE 8 port switch. I hate trying to get the screws in the wall just right, so I printed a board to mount with the “posts” (where the screws go on the back of the swtich) exactly where they need to…
The Imaging Adapter is designed specifically for the Leica SP8 DLS microscope, enabling the imaging of acute tissue slices at adjustable tilting angles. With its advanced capabilities, it facilitates fast 3D Ca2+ imaging in acute tissue…
My ELAC LS10 speaker stands were not tall enough to be at ear level while seated at my desk and the speakers dipped below the height of my desktop. I created this speaker stand extension that raises my speakers 178mm, just enough to put…
Earlier today, I almost threw away the gasket for the HEPA filter used on my Erabros LS1 robotic vacuum cleaner and mop. Luckily, I was able to fish the gasket and filter out of the trash before they were gone for good. I checked Amazon…
Mount for TP-Link LS108G, f3d files provided for easy remix.
Ikea Skadis mount for the RPLS18X-0 Track Saw, which also has a holder for multiple sawblades. This print requires 4 pieces of the painted Skadis T-Clip System by Line Arc Line . Link to the T-clips:…
Ich wollte meinen neuen Youless LS120 nicht am neuen Stromzähler ISKRA MT631 ankleben. :-) Daher habe ich eine einfache Halterung konstruiert. Die Konstruktion in 2 Teilen ist erfolgt, um den Druck ohne Support möglich zu machen. Die…
Functional replacement cap/nozzle for the LS10 foam sprayer. Model tested and prints well. Download includes an STL file and an editable source file. Print with a chemical- and water-resistant filament for best results. Check out my…
Pattern to cut a groove to improve oil flow
10 in rack mount for TP Link LS1008G Network Switch
Stand for TP-LINK LS108GP switch. Fits this model only. No supports needed. PRINTING (as shown in the photo): 0.3 mm layer height No brim 10% infill 2 wall loops Bottom shells: 3 Top shells: 4
It drove me crazy that to use the bag for with the Makita LS1019 and LS1019L miter saws, I had to remove the dust collection flexible hose. Why????? So, this is just a really simple adapter tube that slips into the dust bag and into the…
Tested with PETG, 0.20mm "strength" profile; 6 walls, 15% infill, tree supports, mouse ear brim.
This mount combines a Raspberry Pi 5 and a TP-Link LS1005G in a single 1U panel for a 10-inch rack. The Pi has individual openings for Ethernet and both USB banks. The switch uses an opening for its complete front panel. The design…
An Adapter to assist with measuring String lines for Kerb Machines. Mounts onto the standard GLS115 Leica Mini Prism Pole.
standard gridfinity bin that holds 4 LS 14250 3.6V batteries. no special print settings required. If you need it, i can also do a magnet version. just send me a message.
A 19-inch rack mount modular for TP-Link LS105G + Raspberry Pi. Raspberry Pi 4/5 Might fit others too. Mount the board using self-tapping 3 mm screws. The hex connectors is adapted from Mauker This modular is the hex nut side. So will…
This is updated model for Raspberry Pi 5 instead of 4, mounnting holes were increased to m6 size
Adapter for GLS115 Mini prism Pole to Rampmount Tablet Claw
Mount your hex keys on your Skadis panel. Looks like I will have to shorten the with of the model to make it fit better to the orange part of the Hex Key set.
Looking for a way to neatly integrate your TP-Link LS1005G network switch into your Multiboard setup ? This remix lets you mount the switch directly using the Multiconnect system — no extra adapters or awkward mounting required. Based on…
Print in PETG with at least 4 perimeters (0.4 mm nozzle). The fit is pretty tight, so you have to gently hammer it in place with a rubber mallet.
This fits snug as a friction fit over the plastic output. An alternative would be to remove the plastic out port however I wanted the option of not using it should the need arise. I measured the bore with test fit rings and had a chamfer…
zero clearance kerf board for the Makita LS1040 miter saw
soporte para switch tplink ls1005 0.5u
Frustrated by the lack of storage for the little laser adjustment allen key on your Makita LS1019l or LS1219l miter saw? I gotcha covered! Snaps into the little black bracket on the back of the removable fence on your saw. Use your…
