180 modeli
I got this idea from a video by Stefan Gotteswinter : The basic idea is to be able to use blunt dispensing needles (see photos) with a standard compressed air gun in able to direct air into small openings. I took a slightly different…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
designed to use M3 20-22mm screws and heat inserts.
Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ProPipette conversion kits available The three models currently available are: Kit for 10ml luer slip syringe . 3D printable parts: - Universal spout printed in TPU (This spout works for all luer slip type syringes). - Printed TPU plug…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Ready to use. Only a basic clock mechanism will be needed.
Wydruk około 3,73 €–4,55 € nettoWstępna wycena jednego wariantu
Double-ended Male/Female Luer Lock Cap. In the image the red parts are printed in FDM while the blue ones are the original injection-molded part. Fully 3D-printable in FDM in both orientations, no supports required. Optimized for a 0.4…
edit 24-03-2026: model thread pitch corrected.
So, after many iterations and some bad behavior from my printers, I'm finally releasing this mod, or should i say costume? Basically, this is a custom front plate for my direct drive mod. As a Voron owner and a big fan of Voron printers…
These use the lock portion from #3712257, allowing the tip length, diameter, and style to be customized. Included is a collection of simple round and flat tips, as well as a couple examples of angled and offset flat tips. STL files are…
-PT-BR Esse mod tem como objetivo trazer o Afterburner para a Bluer. O Afterburner "stock" é ideal para ABS porém deixa a desejar com PLA. Como a Bluer é muito usada para imprimir PLA, uma opção melhor seria utilizar um MOD chamado AB-BN…
I have printed a few with and with out support on the bambu X1 carbon on sport speed. Takes about 9 min
Quick design to cap a Luer-lock syringe with needle still on. Works best if you resize it to fit your particular needle, as there are a few different sizes, so I've attached the solidworks file also. So far it's the best easy and cheap…
Connector piece for endotracheal tubes compatible with 2–5 mm tubes, featuring a Luer-lock port for capnography connection and a reduction in instrumental dead space.
This cap will fit standard 15/415 threads and has a luer connection. Meant for SLS/SLA printing. There is a large flat overhang that is not the best for FDM. It cold be redesigned to be FDM friendly, but I was SLS/SLA printing these so I…
Hello, this is a project that i am working since my bowden coupler failed, i remembered why i hate bowden setups, actually i hate the couplers. So, i designed a direct drive mount that is compatible with my cooling solution to upgrade my…
I needed a way to transfer solder flux between syringes. Using PLA+, printed at .1mm layer height, .4mm nozzle, and 80% infill. Printed on Snapmaker A350 and Dremel 3D45, both provided a tight fit, thanks to wavexx' design.
Filter <200μm particle size - for Luer-Lock systems and syringes ( deactivate "fill gaps" )
This is a Luer lock to R3/8" thread (BSPT) adapter that is suitable for printing with an resin printer. For example, it lets you connect syringes to pneumatic fittings, as seen in the picture. Source code (.stp & .3dm) is also provided,…
This is a cap for COSMO CA superglue that allows you to use luer-lock (or luer-slip) needles for more precise glue distribution.
Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…
Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.
This project contains a set of 3d printable main side frames and lower frame for a BLue Robotics Bluerov 2 Remote underwater Vehicle https://www.bluerobotics.com/store/rov/bluerov2/ At the time I created these STL copies of the real frame…
.16lh on centauri carbon using PalA. Printed in 5min with 2 walls and 15% rectilinear infill. No support needed. Total material used, .93g
About Printable ampoules with luer-lock fitting (ISO 80369-1) for training purposes. Different variants available, according to their real-world counter-parts: Ampoules 1ml 2ml 3ml 4ml 5ml 10ml 20ml Vails 2ml 5ml 10ml 25ml Printed with…
Mount a ESP-WROOM-32 on top of the heatsink of Nintendo 64 mainboards. Be sure to use PETG for flexibility and heat resistance.
Male in, male out. Female in, female out connectors. Printed at a minimum resolution of 0.1mm on a resin printer
Blueretro case for minified ESP32. Will work with PS1, PS2, PS3 (via adapter), XBOX 360 (via adapter). Recommended material: PETG/ABS/ASA. Will work with PLA but could deform since ESP32 gets kinda hot. What is blueretro? BlueRetro is a…
Luer locks are connectors designed primarily for medical purposes (but are used in other industries as well, such as chemistry labs). These adapters allow you to connect two same-gender locks, such as connecting two syringes together (FF)…
It's an accessory to avoid fatigue in the the Two Trees Bluer bed wire connection while moving back and forth. I printed out mine cable guide in PLA. Please feel free to modify and send feedback. Also, I would like to give credit to the…
This is an adapter that screws into a standard luer lock syringe so you can hang syringes from a keychain or lanyard. You will need 10mm jump rings to attach these to a split ring or a carabiner. The Short Winged model can be used to…
Lubricant applicator for LM8UU / LM10UU linear bearings (8 mm / 10 mm nominal inner diameter). Luer / Luer Lok interface for syringes at the back. can be printed without supports. 0.2 mm layer height recommended for best printing of the…
stabilizátor osy Z pro Two Trees Bluer Verze bez pomocí šroubů a na dvě ložiska, bohatě stačí použít jen jedno (608) Tisk PLA
You will need the following items for this print: ESP32 30pin USB-C Dev board, these are common on places like aliexpress https://www.aliexpress.com/item/1005006336964908.html Ps2 Controller Male Connector, you will need to bend the legs…
Motor used - https://www.amazon.com/dp/B08HSFSNZQ - I went with 3 rpm for the motor, but feel free to use a faster one with similar dimensions. Personally, I like the speed of this one. Hardware used 4x M3 Flathead 8mm for the cover 2x M3…
This model is the smallest I could make it, and has been designed around Micha213's PCB (https://github.com/Micha213/BlueRetro-PS1-2-Receiver). What to order: 1 x PS2 plug from AliExpress 4 x 6mm M2 screws 4 x 2mm M2 heat set insert (3mm…
Print settings: Material: PLA. Resolution: 0,15mm Infill: 100% Perimeters: 2 Brim: no Support: no
Threaded Tip to adapt the Prusa lubricant LM8UU adaptor to a Luer-Lok syringe Print slow with good first layer squish.
Holder for 10 blueray discs printing time: 16 hours with prusa i3 mk3s+ No supports needed can be mounted to wall or placed on shelf
I did this in a slicer because I was too lazy to boot into windows for fusion360… ENJOY :D Please note that this is a remix of the original in order to fix the issue of the mirrored thread, it has been marked as such with the correct…
First idea was to create a thread in adapter but this one is much simpler…
Our 3D printed fan duct is a must-have for any Two Trees Bluer printer owner. We made it because the original was scraping on the print, causing issues with print quality. With this fan duct, you can improve the performance of your…
Use stock motor, don't need to adjust firmware or steps Use 12mm screws Adjust retraction only Print with PETG or ABS 0.2 layer height
this is an easy to print Hickman/PICC play set with working Luer Locks. great for stuffed animals or just demonstrating with. Includes single and double lumen lines, male and female Luer lock connectors, Luer lock caps and a luer lock…
Use pancake nema 17 Category: 3D Printer Parts
Connect two syringes eg. move flux from a bigger into a smaller
This design provides a tapered nozzle to screw into a luer lock syringe. I designed it for use with casting silicone when making silicone socks for my 3D printer. The mould had a taper where the silicone is to be injected. I printed the…
This polycarbonate fairing can be used on the BlueROV2 to protect the Subsea Buoyancy Foam . *Please note: 3D print does not include the following: 4 x #4 – 3/4 screws
i only tested the fit in my syringe but didnt test the real application. I can't rule out that it won't work (could be too much pressure on the threads while pushing).
An EMT I know was looking to have syringes handy to grab quickly, something color coded for easy identification. I preferred not to get into the debate about what is safe or not with 3D printed parts, or if they will leak, this keychain…
dosing taper tip (1mm bottom for vase mode ↦ check layers‼)
BlueRetro is an open source project that allows you to use modern Bluetooth based controllers on retro consoles. Find out more at the Github and Hackaday sites. This case will hold a BlueRetro build using a ESP32 mounted on a 60x40mm…
BlueRay Box in Bookstyle for 10 blue rays Print instructions multiple parts to glue it together.
Male luer cap that can be as a plug. Category: Other
A rack with eleven slots for DVDs BlueRays or PS3 games. It should also work for other systems like PS4 games or X-Box but i cant test this. Size. 150x195x200 mm i print the rack with 10% infill V1. to stack you have to glue them
I use blueray for my long term storage. I have a lot of disks that I wanted in the same box. these two parts can be printed without any support needed. To support the center post there is a hole intended to put a standard 3/8 dia dowel in…
I store my solder mask goo in little syringes so I can apply it to boards without making a huge mess. These caps are designed to seal the container while not in use. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus…
Changed thread pitch in FreeCAD from 2.5 mm to 5.0 mm for each helix so it matches conventional Luer Lock fittings.
RC Tire Gluer helper for 1/10 to 1/16 RC vehicles. Also for M-CHASSIS, includes the necessary adapters for these tires.
This is a adapter to mount a solder paste needle (or similar) to your smartEffektor. The mounting thread is M12x1.5 The nut has +0.5mm Tolerance for 3D printing. The "Push in Connector" has an M5 thread but can be drilled out I'd say.…
This is a simple parametric Luer slip tip designed in Fusion 360. The tip diameter and length can be adjusted using the Fusion 360 (.f3d) file to fit different use cases. The Luer slip standard is very widely used, especially for syringes…
Syringe / Luer to StageTip addaptor Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Biology
Upgrade for BLuer printer from Two Trees The upgrade includes: - hotend holder - air pipes for cooling the nozzle - holders for 4020 fans - extruder and motor holder infill: cubic - 25% material: PET-G / ABS
A mount for attaching a GoPro to a flat surface. On the BlueROV2 , the mount attaches to the front of the battery enclosure where it has the same view and lighting as the main camera.
Print Settings Printer Brand: Creality Printer: ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% I created this in tinkercad to be printed with no supports. it is thin to save fillament but will work better if it was a bit…
Easy print. Easy mount. STEP file inside. Enjoy! This modification uses stock fans and heater with thermistor. Two weld-in brass nuts are also required. Print Settings Printer: Flyingbear Aone Rafts: Doesn't Matter Supports: No…
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
This adapter lets you connect any standard rubber tubing to a male Luer Lock fitting. It's ideal for transferring gases from pressurized gas cylinders into a Luer-based system. One end fits snugly into common lab tubing, the other locks…
Supports: Yes Infill: %100 Resolution: 0,20 Filament : Petg or Pla (petg more better) Print Settings Printer: Two trees bluer plus Rafts: Doesn't Matter Supports: Yes Resolution: 0,20 Infill: 100 Filament: Microzey PLA-PETG Doesn't Matter…
Description I designed very rigid and simplistic direct drive mount for my TwoTrees Bluer V2. I haven't found a solution that fits V6 hotend and have proper 5015 part-cooling fan. My main goal was to use a minimal number of external parts…
P.S: After printing I made a modification to the guides and the location where the switch wiring goes Português - A Bluer é uma excelente impressora 3D porém sempre é possível melhorar. Com esse ajuste do fim de curso do Z fica mais fácil…
N64bt-dual DIY Case - BlueRetro 1x ESP-WROOM-32 module 1x programmer aliexpress.com/item/4000587174844.html 1x LED Button 12mm 3-6v aliexpress.com/item/1005002530474849.html 2x N64plugs aliexpress.com/item/1005004518984400.html optional:…
A tool to help tighten those upgrade luer lock caps for spore/lc syringes
This polycarbonate add-on fairing is used on the BlueROV2 Heavy configuration to protect the added Subsea Buoyancy Foam and maintain a sleek, hydrodynamic design. Please note that this product doesn’t do much when used alone – it’s meant…
I didn't get the Prusa Advanced Filtration kit when ordering the Core One L - but as I have been printing quanties of ASA recently, subsequently got the BlueRolls fan and HEPA filter from Aliexpress . The jury is out as to how effective…
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…
Remix to use Luer Lok Tip Syringes for the grease injection and M3 hex type screws. The variants are for: LM8UU, LM10UU, LM10LUU, LM12UU and LM12LUU. Not all print tested yet. Updated to M3 screw and increased the syringe fit diameter…
To post process I put a piece of 400 grit sand paper on a sheet of glass and wet sand the mating faces until flat. Apply mold release. You can use vaseline thinned with a bit of mineral turpentine (mineral spirits) in a pinch.
In an attempt to make them a little more airtight I dropped the layer height to .12mm instead of .20 and used supports. Printed for flight medicine. My Orcaslicer settings .12mm layer height .4mm nozzle -Wall loops 3 -Support - Tree,…
This is the 3D model of a BlueROV2, as used in the virtual double view in BlueOS, but with the wires removed, brackets thickened, and internal voids filled. The geometry is very rough since I made all the changes manually in PrusaSlicer,…
Simple mount to Filler Spool holder using stock BlueR V3 Hardware. Print instructions Category: 3D Printer Parts Summary Simple mount to Filler Spool holder using stock BlueR V3 Hardware.
I purchased a Wowstick Gluer - a hot stick glue gun that only supports 7mm hot glue sticks with a length at max 35mm. So I designed a small jig that can help cut cheap hot glue sticks to the correct length. Then I decided that I wanted to…
I needed a grease tool for my Ultimakers' LM6LUU bearings (the 35mm long version of the LM6UU). I enjoyed @gezatata_269121 's version of the LM8UU tool but could not directly shrink it as the greasing holes would be too small, so I made a…
This HDPE thruster guard is used on the BlueROV2 Heavy configuration to protect the vertical thrusters and to prevent them from snagging on the tether, weeds, or ropes. *Please note: 3D print does not include the following: 8 x Heavy…
You will need: 2x 12mm M2 screws 2x M2 nuts Male PS2 gamepad Connector ESP 32 Mini
MX-creations DISCORD (German) Eine funktionale Spritze für z.B. Fett, Wärmeleitpaste, Lötpaste, usw. Sie ist dem Luer-System nachempfunden bzw. kompatibel, somit lassen sich Kanülen schnell und sicher befestigen oder lösen. -bitte mit…
This compresses the sidewalls of your 2wd buggy tire to glue them to the wheel. This is meant to stiffen and shorten the sidewalls. It's primarily used is 2wd buggy offroad carpet racing. The file only contains one half of the device, but…
I shared just hotend related parts. If you want extruder/bowden, face and the other parts you can find on voron website and printables. You must use petg or abs. Don't use pla. Notes: If Your Bltouch probe is shorter than desired length.…
2 Ventile für T-Stücke von Luer Lock - Zusammen mit einer Spritze kann eine Handpumpe erstellen. Zur Funktion müssen die Gewinde mit PTFE-Band abgedichtet und der Verschluss mit etwas Silicon-Armaturenfett versehen werden - dann kann man…
No Supports Print Settings Printer: Bluer Two Trees Rafts: Yes Supports: No Resolution: 0.2 Infill: 20 Filament: my3D PETG, ABS Black Category: 3D Printer Extruders
This might be useful if you're building a smaller ROV based on BlueRobotics parts. The front side slides on to 2020 aluminum t-slot, while the other side connects to BlueRobotics' 4" enclosure clamp , using 4 M4 screws. As you can see in…
The Two Trees Bluer strain relief model was created as a response to the potential danger of not having proper strain relief on the bed wires of 3D printers. After watching the Sovol SV06 Plus unboxing stream by Joe Telling, it became…
Voici une tête de remplacement pour l'imprimante Bluer de Two Trees, elle vous permettra de remplacer les buses de ventilation, pour pouvoir améliorer le refroidissement du filament. Et vous pourrez passer votre imprimante en Direct…
DD for Two Trees Bluer Print Settings Printer: Bluer Two Trees Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: my3D PETG Category: 3D Printer Parts
Hello! This is a collection of my models for the Kobra S1 and the Ace Pro in .step format for you to use for remixes and modifications. 1: The vanilla fan cover 2: The fan duct closely modeled after the original 3: The Ace Pro insert for…
Blowing under the long throat !!! Supports only under 2 item. The radiator mount is screwed onto the factory M3 screws, the coolers are also fastened to the factory screws, you need 4 M3 15mm screws to fix the parts with the fans Infill -…
I made noctua fan upgrade you can find in my youtube link attached below. If you use another drawing linked below this is very week and thin https://www.thingiverse.com/thing:4693716 I made this drawing more thicker it make part more…
Print at 45 degrees with supports so the connectors are the last to print. Minimum 0.1mm layer height resin print.
This model is a cap for plastic luer-lock needle tips. These tips are designed primarily to fit syringes, but you can also get fitting adapters for other purposes, such as superglue bottles - this is what I use them for. My tips came from…
MAD - Modular Air Duct for BIQU H2 base with mount for twotrees bluer
Print on resin printer with at least 0.1mm resolution. For use with 10mm id pipette Ideally clear resin, but other will work. Make sure to unclog the channels soon after the print has finished UPDATED: Air pressure relief hole reposition…
The injection molded model is prone to sagging when the enclosure gets hot. This one has more meat.
![DIY Blueretro 5in1 [PS1, PS2, PS3, XBOX360] - guide on description](https://media.printables.com/media/prints/629834/images/4989945_188c260e-8dd5-41da-a0ac-36ffe29a7357_91bded45-4751-4250-9ef1-fa21992d5f44/photo_2023-10-28_23-53-27.jpg)
