Wyniki wyszukiwania: magnets

Sortowanie

2823 modeli

P
Printablesaki3d.ca

AirPod Max Holder with Integrated Magnets

Not everyone likes putting their Apple AirPods Max into the bra between each use. I designed this to provide a place to easily rest your AirPod max headphones. The magnets will sleep the headphones saving your battery. I print this at…

Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu

Pobrania
1259
Polubienia
165
Ocena
5
P
Printableswoelpi

Eureka Portafilter Funnel with magnets

I designed this portafilter funnel, because I didn’t find any that looked nice, cleared my mill and had magnets instead of using the lugs of the portafilter. So I made this nice funnel. You’ll need 6mm diameter magnets with 3mm thickness…

Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu

Pobrania
431
Polubienia
65
Ocena
5
P
PrintablesactualSIZE

Uchiha Sharingan Magnets

A few of the eye designs found in the Naruto series. Print instructions Switch from red to black at 1.7mm. Glue a small 7mm magnet on the back side to complete.

Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu

Pobrania
407
Polubienia
36
Ocena
5
P
Printableskeejo

Escher Lizard Fridge Magnets

Too much fridge art, not enough magnets? Escher lizards to the rescue! These lizards tesselate for puzzling fun, and are compact enough to not detract from artwork on display. The model includes inside a circular hole suitable for a…

Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu

Pobrania
394
Polubienia
165
Ocena
5
P
PrintablesMetikumi

Two-Color Alphabet Small Letters with embedded Magnets

This is a full set of all small letters of the alphabet. It is a two-colour PLA print with embedded magnets. You need enough 4x5 mm cylindric neodymium magnets to embed into this print. These can be bought cheap in large quantities. The…

Wydruk około 7,18 €–8,77 € nettoWstępna wycena jednego wariantu

Pobrania
210
Polubienia
43
Ocena
0
P
PrintablesExceeder

Honeycomb HSW Hidden Magnet Mount for three 6mm x whatever magnets

Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…

Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
204
Polubienia
45
Ocena
5
P
PrintablesIn3DSpace

Fanatec Formula Shifter Magnets

Shifter magnets for Fanatec Formula wheels. Available in two variants, 6mm magnets for light actuation, and 8mm magnets for heavy actuation. Required Hardware: (4) 6 x 2mm disk magnets OR (4) 8 x 2mm disk magnets (4) M3 x 5mm countersunk…

Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu

Pobrania
177
Polubienia
35
Ocena
0
P

Voron 2.4 Nozzle Brush with Removable Purge Bucket (6x3 Magnets)

This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff.…

Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu

Pobrania
164
Polubienia
26
Ocena
5
P
PrintablesSTSUL.CZ

NBA plate for magnets or cakes

3D logo NBA, Bulls, Nets, Cobe 24, Durant 7, Irving 11, James 23, Jordan 23, basketball all in one or two or there colours, 3mf and gcode files are designed for PLA or PTEG, quality 0.3 or 0.2mm

Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu

Pobrania
156
Polubienia
8
Ocena
5
P
PrintablesJimmy

Full length door handles - knobs at the top with embedded magnets

I didn't want the closing mechanism to be at the bottom, because the door stop would need to be at the bottom as well, which can be an obstacle. That's why I put it all to the top. Also the smaller hinges/handles seemed a bit week, which…

Wydruk około 3,01 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
113
Polubienia
24
Ocena
4,8
P
Printablessdwilsh

Gridfinity Embedded Magnets Battery Tray

This is a set of Gridfinity battery trays with embedded magnets in the bottom to help align and hold them in place in the grid. Importantly, this set keeps the batteries all at the same height across the different battery heights, making…

Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
111
Polubienia
9
Ocena
5
P
PrintablesSc1re

Claws with Magnets for mounting

I took @orangepiweb's model, added connection between the 4 claws, enlarged it by 25% and added holes for 4 magnets. The idea and that you can make red or black streaks and white claws and then connect it to a magnetic surface. its about…

Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu

Pobrania
103
Polubienia
43
Ocena
5
P
Printablesmeagerfindings

Prusa Core One Dust Protector (Embedded 6mmx2mm magnets) - no glue

Another iteration on already stellar designs, just some small tweaks to embed the 6x2mm round magnets into the print with a pause at layer 17 to place the magnets when printing.

Wydruk około 2,96 €–3,61 € nettoWstępna wycena jednego wariantu

Pobrania
85
Polubienia
35
Ocena
5
P
Printablesozgur

Baby teeth box clamshell with magnets

I designed this my self, i wanted roughly a mouth shape upper an lower jaws. Both halves have lids held with hinges and clips. The two halves held together with 8mm x 2.7mm cylindrical neodymium magnets. I printed this using black tough…

Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu

Pobrania
80
Polubienia
14
Ocena
0
P
Printablessdwilsh

Gridfinity Brady M21 Cartridge Holder with Embedded Magnets

This has slots for 2x6 magnets in each of the four corners. Just add a “Pause Print" at the appropriate spot, and place them in!

Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
76
Polubienia
8
Ocena
5
P
Printablesminimaxwell

Magnetic shelf with embedded magnets

This is a small magnetic shelf I made to hold my tea boxes on the side of my fridge. It's wide and deep-enough for a 9cm x 11cm tin tea box, but can also be used as a spice rack. It's designed for use with 8mm diameter x 6mm tall magnets…

Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu

Pobrania
75
Polubienia
13
Ocena
0
P
PrintablesMakkuro

Shopping list / grocery list on fridge (w. round magnets)

A magnetic shopping list / grocery list which sticks to your fridge door. Write down missing inventory. When leaving for shopping, just pull out the paper and rip it off below Model is originally from krutooo ! See here . The model is…

Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu

Pobrania
62
Polubienia
20
Ocena
0
P
PrintablesLeon Matthews

Gridfinity CNCKitchen Threaded Insert Holder w/ Magnets

Small OpenSCAD script to add magnet holes to Rabbit's excellent Gridfinity holder for a set of CNCKitchen's soldering iron tips for insetting threaded brass inserts . Note that I haven't added the M3 screw holes, mostly because I don't…

Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu

Pobrania
53
Polubienia
14
Ocena
5
P
PrintablesMooch

Top Gear Lap Time Letters with Embedded Magnets

This is a recreation of the Top Gear Lap Times letters using the Nuber Black font with embedded 5x10mm neodymium magnets. I've also included a dry erase marker holder (diameter of marker <19mm). The letters use 22 magnets while the marker…

Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu

Pobrania
52
Polubienia
8
Ocena
5
P
PrintablesCuriosityKT

Staedtler Noris Digital Jumbo stylus Pen Cap with magnets

I made the cap bigger to fit the stylus. I also added holes for magnets on one side. The printed version above (and gcode) has my intials on it, but the actual print file (stl) does not include the SMS on it. I use the stylus for my…

Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu

Pobrania
47
Polubienia
2
Ocena
3
P
PrintablesDowdle

BLLed Magnet Cover for 6x3mm magnets

BLLed Magnet Cover for 6x3mm magnets i had left over from a voron build they are push fit

Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
46
Polubienia
5
Ocena
4
P
PrintablesSknown

Whiteboard Maker Holder reusing HDD magnets V2

A magnetic holder for whiteboard makers reusing HDD magnets. This is version 2 of https://www.printables.com/model/272987-whiteboard-maker-holder-reusing-hdd-magnets HDDs break if you use a PC for a long time. The only way to use a ruined…

Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesAlvomane

Foldable key holder for four magnetic keys | Klappbarer Schlüsselhalter für vier Magnetschlüssel

Protected magnetic keys have asymmetric key ring holes and are quite long, so I made this foldable key holder especially for them. It holds four magnetic keys and both halves are connected with a M3 screw/nut. Since the keys do not rest…

Wydruk około 0,81 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
29
Polubienia
7
Ocena
0
P
PrintablesMupshot

remixed D&D dice box with enclosed magnets

Larger scale requiring a pause to insert the magnets so they are covered by a few final layers of plastic. magnet wells are 8x3mm I used 8x2 in my POC and the adhesion isnt as strong as I would like, so use 8x3 magnets if you can, or use…

Wydruk około 4,87 €–5,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesRoyal198

CR2032 battery box with magnets

You can find both lid with “CR20XX” text or version with no embossed text. Magnets used are 5x2 mm. You do not need them to glue (you can) but you can just press them in with force. 20pcs version Lid: 125,5x33,5x11,5 (mm) Base:…

Wydruk około 2,36 €–2,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesR3V3RS3R

Cabinet Magnet Case (15L 4H Magnets)

This Cabinet Magnet Case custom made is great to use on small spaces like kitchen cabinets or any other cabinet you might want to add a small magnetic lock! Print instructions Category: Household Summary This Cabinet Magnet Case custom…

Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesBydmar

Magnetic latch for 10x2mm neodymium magnets

Simply slide in a 10x2mm neodymium magnet in the pocket (no glue needed) and glue other 10x2mm magnet to the surface of door etc. I use mine to keep door closed against foam for extra sound proofing my printer in diy enclosure made of…

Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesFatality

Skadis Duro (Aldi) Magnetschiene

Skadis Duro (Aldi) Magnetschiene

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesSundborn3D

Staggered prusa steel sheet holder with magnets

I liked the original design, but wanted to add magnets to keep it in place in a metal cabinet. I thought a re-design would be needed, but as luck would have it, I had a bag of magnets on my desk which fitted exactly in the hexagonal holes…

Wydruk około 5,15 €–6,29 € nettoWstępna wycena jednego wariantu

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesM3D

macOS Window Control Magnets

About Fridge magnets that are designed to look like the window controls inside of macOS. Includes the three different versions of the „expand“-button. Magnets The parts are designed to fit a D6x3mm magnet on the back. The magnet should…

Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu

Pobrania
13
Polubienia
4
Ocena
0
P
PrintablesMateuszMiler

Social Community sign with magnets

Added Gcode for generic PLA and 10% infill . Letter height is 1cm and length of word social is 20cm fits Prusa mini bed ;) hand nicely on fridge or whiteboard

Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesSembazuru

Prusa Core One Magnetic Top Cover with Integrated Vent Handle, now with Embedded Magnets

Using the same 5x5mm magnets as the original, but I wanted the magnets embedded into the print just to make sure they never accidentally fall out. The magnets have a slightly looser fit than the original so they should easily slip into…

Wydruk około 4,93 €–6,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
12
Polubienia
6
Ocena
0
P
Printablessander1095

(5x2mm magnets) Magnetic PFTE coupler adapter for Prusa Mini filament sensor

The same model as the original, but with a 5x2mm version instead. My modifications were all done in Prusaslicer. The 3mf file contains all my (nonsense) changes with cylinders and negative cylinders, as I don't know CAD. If it's stupid…

Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesMHe

Rounded Bottom Box with Lid and Magnets

Remix an existing box to store the spare screws and save space. I use 10x2mm magnets. Printed with 0.2 layer height

Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
1
Ocena
0

MagFlip holder with magnets

You have to make a pause in your slicer where the wholes are in the holder and then you have to put the magnets inside.

Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesRoss Gunderson

Magnetic Thumbtack (8mm x 3 mm magnets)

Small magnetic thumbtack for your whiteboard or fridge, or wherever! Requires you to place a small magnet, round 8 mm (diameter) by 3 mm magnet. These would work. You could use a larger 4 mm magnet, as there is space.

Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesKazi Toad

Geared SD Card Case with Snap-fit Hinge and Magnets

These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad Don't you hate misplacing your individual SD cards? Now…

Pobrania
13 011
Polubienia
3903
Ocena
4,78
P
PrintablesLayersFarm

Bambu Lab Y-Splitter with PC4-M10 pneumatic connector and magnets

Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…

Pobrania
10 188
Polubienia
2190
Ocena
4,85
P
PrintablesNoWarrenty

Gridfinity Clickfinity Baseplate - No magnets, universally compatible with all bins, minimal filament usage.

The Clickplate is a Gridfinity baseplate that doesn't utilize magnets. Instead, it secures bins with four small arms per square. The grip is quite strong, as the layer lines interlock with each other. Here is a Video of it in action. Here…

Pobrania
7139
Polubienia
1527
Ocena
4,81
P
Printablesiplop

Denture Bit Holder With Magnets!

Uploaded Version 2_3! I've made the hinges much beefier & added locking indents on the hinge so it will snap close & open! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fits standard 6.35mm or…

Pobrania
5080
Polubienia
994
Ocena
4,75
P
PrintablesAztairya

Simon's Cat Fridge Magnets V2

Improved version of my original magnets with 5 new cats, slightly thicker (5.5mm) and embedded magnets. I provided an Orca 2.1.1 profile for the MK4 where magnets are already placed and pause & color change are setup too. All you got to…

Pobrania
2649
Polubienia
936
Ocena
4,93
P
PrintablesEd

Core One Purge Bin - Clearance for Core One Nozzle Wiper - Remix 20x5x2MM Magnets

I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.

Pobrania
2378
Polubienia
475
Ocena
4,96
P
Printablesrpgweb

The PERFECT Gloomhaven/Frosthaven standee- with optional magnets

This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…

Pobrania
1900
Polubienia
288
Ocena
4,75
P
PrintablesAztairya

Simon's Cat Fridge Magnets

Fun little Simon's cat fridge magnets. Default size vary from 80 to 100mm in heigh and 5mm in thickness. You may want to change color after the 3mm layer. Glue a magnet on the back (CA or neoprene glue). I used a single 10x2mm per item, I…

Pobrania
1622
Polubienia
704
Ocena
4,9
P
Printablesmihaupe

Mario Bros - fridge magnets

On the back there is space for a 7x2mm magnet.

Pobrania
1618
Polubienia
913
Ocena
5
P
PrintablesOllieMakes

Flashforge Adventurer 5M LED bar with Magnets

I added holes for 5x2mm magnets to mount these LED bars in the AD5M and be able to easily reposition or remove them as needed. Also added a hole in the end that was filled so multiple bars could be wired together. Model has holes for 8…

Pobrania
1551
Polubienia
259
Ocena
5
P
PrintablesMarian Adam

Philips OneBlade Travel case with 4x3 magnets

this is a remix of the OneBlade travel case made by Andres. i just modified the magnet space to fit 4x3 or 4x4 magnets.

Pobrania
1511
Polubienia
714
Ocena
4,67

Potted Plant Fridge Magnets

Everyone likes plants, so why not put them on your fridge? (or any metal surface). These potted succulents use a 10x3mm magnet which snuggly fit in the back but should be held in with a drop of superglue. Plants are split from the pot for…

Pobrania
1440
Polubienia
676
Ocena
4,93
P
Printablesgracein

STRANGER THINGS 4 COLLECTION OF MAGNETS

As a fan of serial Stranger Things I designed collection of fridge magnets. All you need is magnet of this size: 5x2mm and a bit of superglue or there are types of models without holes and you can use magnetic foil. I used Prusa Printer…

Pobrania
1407
Polubienia
302
Ocena
4,88
P
PrintablesJeepingJohnny

Extruder Gyroscope, Print in place with press fit magnets.

I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…

Pobrania
1360
Polubienia
336
Ocena
4,97
P
PrintablesNing

Cat Paw Fidget clicker - Fridge Magnets

Cat Paw Fridge Magnets Fidget Clicker! I use the mechanical switch and keycap to make a cute fidget clicker. And add three 6 x 3mm magnets to stick to the refrigerator ( glue needed.) You might also use springs if you don't have keycaps.…

Pobrania
1316
Polubienia
195
Ocena
0
P
PrintablesPenguinPrints

Gridfinity Thin base with magnets

This is a quick remix to add magnet holes to the thin base plates. I use these in my tool boxes. The magnets hold the base plate in pretty securely. This uses the same size magnets as the bins: 6mm x 2mm. Prusa slicer handles the magnet…

Pobrania
1311
Polubienia
141
Ocena
5
P
PrintablesCmarlow

Makita bit holder with magnets

I made this remix of this bit holder with 6x 6x2mm magnets that is placed under the bit. Either insert a magnet under the bit and place it in the holder and press it against something hard for a friction fit or print the other version the…

Pobrania
1268
Polubienia
221
Ocena
4,89
P
Printablesamulej

Bambu Lab A1 poop bin with magnets

For those delicious little blobs that come out of your printer! Compatible with AMS lite top mount support brackets v1 will extend to the AMS support bracket v2 will center the wall to the poop launcher v2-slim has 1.2mm walls to save…

Pobrania
1238
Polubienia
109
Ocena
4,83
P
PrintablesNadir @ CN3D

SV08 CN3D Shroud V3 Extra : Fan, Magnets Klicky + LED

Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…

Pobrania
1207
Polubienia
202
Ocena
4,89
P
PrintablesKNfLrPn

Majora's Mask Woodgrain Flat Back / Embedded Magnets

There is a version without embedded magnet spots and one with. (!) If you want to embed magnets, make sure you look up how to add a pause during the slicing process. This varies by slicer. (!) The current design is for cylindrical…

Pobrania
1205
Polubienia
449
Ocena
5
P
Printablesgameyspirits

WWE Ring Stairs 2 parts with magnets - REMIX

I remixed Focian's awesome stairs and changed a few things. Added steel diamond texture. This does significantly bloat the size of the stl. Removed posts and added holes for magnets instead. I used some superglue to hold the magnets in…

Pobrania
1189
Polubienia
81
Ocena
5
P
PrintablesKamil K

DiceTower with magnets

Dice Tower does not require any supports. Please scale the model according to your dices: - 85% - OK for all dices - 75% - Can be not ok for D20 dices (other than d20 - ok) Print both files and after that add four 5mm neodymian magnets in…

Pobrania
1170
Polubienia
185
Ocena
4,94
P
PrintablesMarkus710

Deburring tool case with magnets

I wanted to made print in magnets so you dont have to click the tools in. I used Magnets ⌀5x1mm. I used this Magnets from amazon. I made a second version on request for ⌀6x3mm magnets. The design is made for this deburring tool What you…

Pobrania
1170
Polubienia
345
Ocena
4,85
P
PrintablesJohn Doe

UPDATED Pico 4 Increased FOV facial interface gasket v4, now with magnets

The Pico 4 is better in almost anyway than the Quest, it is lighter, better balanced, and has a higher FOV out of the box than I have been able to get with any facial interface for the Quest. The only thing the Quest does better is…

Pobrania
1139
Polubienia
45
Ocena
4
P
PrintablesStellar5

BambuLabs Logo Poop Bin - 6mm magnets

Catch that filament poop! This is a small, minimal poop basket remix in which I made only two simple changes: Magnet holes have been adapted for 6mm x 3mm magnets The BambuLabs logo has been embedded on the outside of the bin 3 versions…

Pobrania
1109
Polubienia
124
Ocena
4,83
P
PrintablesMartin_au

Customisable magnets for deck boxes (M:TG)

These are customisable magnets for use with deck boxes, or anywhere else you can imagine. They are designed for these two deck boxes: The basic one -…

Pobrania
1085
Polubienia
116
Ocena
4,67
P
PrintablesBenBreaksThings

Gridfinity Wera Hex Wrench Organizer; no magnets

Within the gridfinity system there are those that like having magnets and those that do not. Remixed because I remove magnets from all models prior to printing them for myself and figure someone else out there may be of the same ilk.

Pobrania
1085
Polubienia
266
Ocena
4,17
P
PrintablesDenholm365

Seahorse symetric magnets

Here are some SEAHORSE magnets. This is a remix of a 2013 design : https://www.thingiverse.com/thing:182265 ( can't cross "remix" for publishing as the source is external of Printables ) Made of 2 symetric parts Requires 2 magnets 8x3mm…

Pobrania
1065
Polubienia
110
Ocena
5
P
Printablesjack_hmr

Gridfinity Snap Together Baseplate with Captured Magnets

Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 Also inspired by https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate Optimal settings:…

Pobrania
1006
Polubienia
195
Ocena
4,8
P
PrintablesPeter C

Golf - Golf Ball Stencil - Holder - Ball Buddy - exposed magnets & embedded/covered magnets version

Use the Ball Buddy to customize your golf ball. For SLA or FDM single filament printers this model has two versions of the magnetic golf ball stencil holder (exposed and covered magnets). Both versions made up of two ball holder halves…

Pobrania
976
Polubienia
70
Ocena
5
P
PrintablesWHerzog

Rubber Duck Fridge Magnets

This is a scaled down version of the Rubber Duck made by Wille on Thiniverse. I have added a flat bottom and a hole for a 10*3mm magnet It is recommeded to glue the magnet with some CA glue into the hole. If your prints have an elephant…

Pobrania
973
Polubienia
189
Ocena
4,73
P
PrintablesRobert Samples

Elegoo Centauri Carbon Purge Bin- No support, w/magnets

I liked the fully closed purge bin designed by MikeyLew32 but modified it to be printable with no support and include four 3x6 mm (standard voron size) magnets to keep the drawer in place and minimize rattling during printing. Magnets…

Pobrania
970
Polubienia
141
Ocena
5
P
PrintablesMatthew B

Prusa Core One Side Storage (20x5x2 Magnets)

I found it difficult to source the same 20x6x2 magnets that Prusa uses in the USA, so I remixed the side storage design to accept these 20x5x2 magnets (actual dimensions closer to 18.9 x 4.6 x 1.8 mm). Required hardware: 29x 20x5x2…

Pobrania
933
Polubienia
334
Ocena
4,86
P
Printablesjuiceboxjuice

Dog Man Fridge Magnets

With inserts for 8x3mm magnets, pop them in during the print. Use Pause at Layer or similar functionality to insert magnets and change filament. Includes: Dog Man Petey L'il Petey 80-HD The Dog Man Logo

Pobrania
931
Polubienia
116
Ocena
4,91
P
PrintablesBenBreaksThings

Gridfinity 1x1x3 SD Card Caddy (no magnets)

Gridfinity compliant 1x1x3 block with 7.9 mm gap between each card for ease of access. No holes for magnets, my printer isn't dialed in enough to do those holes, so my entire Gridfinity collection is without.

Pobrania
929
Polubienia
133
Ocena
4,92
P
Printablesrreibel

Dinosaur Magnets

These are dinosaur themed refrigerator magnets. Quick and easy to print requiring no supports and minimal infill. Press an 8 x 3mm magnet into the recess in the dinosaur and it's ready (glue is optional, but recommended). These were made…

Pobrania
906
Polubienia
169
Ocena
5
P

Core One Corner Plug - No Magnets Needed - Also usable as corner mount

I re-implemented the idea of Blue to see if I could cover more of the gap, and as I was messing around with the dimensions, I found this geometry, which fits so perfectly that it snaps into place without the need for magnets or any other…

Pobrania
886
Polubienia
261
Ocena
5
P
PrintablesM.Kayed

Bambu Poop Chute No Magnets

A Bambu Lab poop chute that requires no magnets. 2 part design. The holder and the bucket. Replace the plastic screw on the factory poop chute door with an m3x10 screw and do not over tighten. Enjoy.

Pobrania
867
Polubienia
114
Ocena
4,96
P
PrintablesVargaMark

Mario Piggy Bank with embedded - hidden - magnets

I have modified the model to hide the magnets. It looks much better. But it is VERY IMPORTANT! You'll have to set the slicer to STOP THE PRINT at the top of magnets, before the first layer, that covers the magnets. Here is a tutorial…

Pobrania
845
Polubienia
245
Ocena
5
P
Printablesterablast

Holder for CORE One Nozzle Replacement Tool and Nozzle Wrench (Skadis/Magnets)

A simple holder to store the CORE One nozzle replacement tool as well as a nozzle wrench! (Fits both the “No sock” and “Sock” versions of the CORE One nozzle replacement tool) Attaches to a IKEA Skadis pegboard or to anything…

Pobrania
842
Polubienia
271
Ocena
5
P
PrintablesLandon Campbell

1x1 Short Vase Mode Gridfinity Bin With Magnets

I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…

Pobrania
818
Polubienia
79
Ocena
4,67
P
PrintablesJCMD

P1P/P1S 360 Fan Flow Duct with “Parametric“ Magnets

X1/X1C OWNERS: Reviews on the source model mention that it is not compatible with the X1 tool head as it collides with the LiDAR sensor. I do not have an X1C so I cannot test this, print at your own risk. The original model for this remix…

Pobrania
814
Polubienia
209
Ocena
4,89
P
PrintablesDIYwithJJ

Toolbox Modular Screwdriver organizers with built-in magnets

See my YouTube video for details on the build, dimensions, and print process:

Pobrania
797
Polubienia
122
Ocena
5
P
PrintablesSummons

Crocodile Skink with 7 hidden 6x3mm magnets (1 pause) and 2nd pause for manual filament change

I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print... I printed in Bronze silk then Rainbow silk to get the colour. 1st pause in the print is at the top of the magnets. At the pause,…

Pobrania
779
Polubienia
197
Ocena
4,93
P
PrintablesFxhDesigns

Axe Magnets

These axe fridge magnets are perfect for holding notes or pictures on your refrigerator or dry erase boards. They offer a unique way to organize and display items on any magnetic surface. Printing Suggestions: Prints with a layer height…

Pobrania
778
Polubienia
458
Ocena
4,92
P
PrintablesLockHar_

Elegoo Centauri Carbon Scraper Holder remix (with magnets)

Remix of the original scraper holder supplied with the Centauri Carbon, inspired by Uncle Jessy's modification but a little more compact and straight. Need : -4x magnets : 8 x 2mm -Glue My 8 x 0.87 mm magnets were a little too weak, I…

Pobrania
762
Polubienia
92
Ocena
5
P
PrintablesMOSTAR

PTFE Tube Y-Splitter With Strong Magnets

Improved PTFE tube grip for more secured grip. Added two hidden very strong Prusa magnets for easy and quick mount. Changed to M3x8mm bolts without any inserts. To assemble and mount PTFE Tube Y-Splitter you will need the following*: M3x8…

Pobrania
759
Polubienia
69
Ocena
4,54
P
PrintablesTony Ling

Music Notes Magnets

I designed this collection of musical notes fridge magnets using SVG files from https://www.svged.com/. At 100% scale, all the fridge magnets are 5.0mm high, with 6.2mm x 3.2mm holes for embedding 6x3mm neodymium magnets during printing.…

Pobrania
756
Polubienia
105
Ocena
4,67
P
PrintablesMyNameIsHate

CYD NM RF Hat Enclosure / Case (Magnetic, 6x2mm Magnets)

This is a enclosure designed for the CYD NM RF Hat (commonly used with the Cheap Yellow Display). The case protects the electronics while keeping full access to the screen, antennas, and connectors. The lid is secured using 6×2 mm magnets…

Pobrania
755
Polubienia
49
Ocena
5
P
Printablesjustin thursday

Pokemon Unown #201 Magnets

This is the full Pokemon Unown alphabet made into magnets. They're roughly 30-35mm tall. The one piece models can easily be printed with two colors. The black base is 3mm tall and the white section is 1mm tall making them 4mm tall…

Pobrania
732
Polubienia
133
Ocena
5
P
PrintablesZ3Dart&tech

Bambu Lab X1 Spacers - top glass lid cover riser holder shim air vent (with magnets)

for a better anchoring of the spacers I have inserted 3x8 magnets. Mirror both parts for a set of four.

Pobrania
728
Polubienia
78
Ocena
4,89
P
PrintablesJordan Andersen

Triangular Stylus With Magnets for Flashforge AD5M Adventurer 5M

Stylus that is similar to the one loaded onto the flashforge 5M / AD5M from the factory. Has two spots for magnets. Same magnets that are in the enclosure kit. Printed with default settings, but add brim, and no supports.

Pobrania
725
Polubienia
74
Ocena
5
P
PrintablesRork

Improved Magnetic DeWalt bit holder - 6x3mm magnets, easy insertion and removal

This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…

Pobrania
723
Polubienia
137
Ocena
4,88
P
PrintablesChristos

Bambu Lab X1 Y-Splitter (8X3mm Magnets)

I remix the model from LayersFarm https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec/files in order to fit my 8x3mm magnets.

Pobrania
684
Polubienia
95
Ocena
4,8
P
PrintablesJamesonThug

Modular Mushroom Magnets

I Went back to the origional models, repaired and reoriented them, then added holes for 10x3mm magnets. I then split those on half and added holes on the new face as well, and mirrored all models. The result is that you can add them…

Pobrania
684
Polubienia
655
Ocena
5
P
PrintablesHeyitsCasie

Dinosaur Bones Magnets

Ignite your imagination with a set of dinosaur fossil magnets to use around the home. These magnets feature dinosaurs such as the T-Rex, Stegosaurus, Spinosaurus, plesiosaurus, pterodactyl, brachiosaurus, triceratops, and a…

Pobrania
668
Polubienia
163
Ocena
5
P
PrintablesSirPrintsALot

Bit Holder Teeth (Magnets on outside too)

Modified the main parts of the Dentures by iplop and NotThatDusty to also have some openings on the bottom and top so the whole thing can have magnets on the outside as well and stick to metal surfaces when the jaws are fully opened. I…

Pobrania
666
Polubienia
216
Ocena
5
P
PrintablesRKFSOCIETY

Kobra S1 Front Cover on magnets

A lightweight version of the front of the head body. (ABS = 16 grams)

Pobrania
660
Polubienia
95
Ocena
5
P
PrintablesMadGoat

Bambu Lab X1C X1 - top glass spacers with magnets & longer for more glass support

This is a Remix of Z3Darttech's glass top spacers that gives a bit more length to the front pieces thereby allowing for more support, especially when an AMS is on top. I wanted this type of simple low material spacer with magnets as well…

Pobrania
645
Polubienia
77
Ocena
5
P
Printablestakara

Articulated lizard with holes for magnets

I cut some holes for neodymium magnets with 3 mm diameter and 2 mm thickness. There is only one layer between the build bed and the magnets. It was a tight fit for me, so it may depend on the calibration of your printer if it works for…

Pobrania
613
Polubienia
111
Ocena
4,5
P
PrintablesLumanieri

Luke's diner sign fridge magnets from Gilmore Girls

Hello. I have recreated the sign for Luke's diner from the 2000 show Gilmore Girls. The files come with both sides of the sign that hangs outside the diner. Six 10x2mm magnets required for each sign (12 in total), pause mid way through to…

Pobrania
613
Polubienia
78
Ocena
5
P
PrintablesBen

M6/M10 PTFE Tubes connector (magnetically) PC4-M6 / PC4-M10 / 6x2mm & 6x3mm magnets

I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…

Pobrania
609
Polubienia
110
Ocena
5
P
PrintablesRKFSOCIETY

Kobra S1 Back Cover on magnets

A lightweight version of the back of the head body. (ABS = 12 grams)

Pobrania
606
Polubienia
73
Ocena
5
P
PrintablesElber

GridFinity Connecting Baseplate with press-fit magnets

Parametric (F3D) GridFinity baseplate with optional printable connecting clips. 6x2mm magnets can be press-fit into the model as per the remix source. Notes for changing parameters: When increasing the dimensions, make sure the slots have…

Pobrania
606
Polubienia
81
Ocena
4,78