Art Nouveau Planter
Art Nouveau Planter / Cup
- Pobrania
- 454
- Polubienia
- 157
- Ocena
- 5
1577 modeli
Díl spojuje dřevěnou vláčkodráhu a LEGO DUPLO. Přidává možnost postavit nádraží nebo tunel The piece combines a wooden train track and LEGO DUPLO. Adds the ability to build a station or a tunnel.
Art Nouveau Bas Relief : 1913
Just in time Filament break or runout sensor. This design uses the original filament runout sensor switch to detect filament break or runout events just in time. the sensor detects when you run out of filament al the last possible moment,…
Lichtgevende meisjes naam Eva, Luminous women's name Eva
Lichtgevende meisjes naam Millie, Luminous women's name Millie
Voronoi planter with double voronoi effect on outside and smooth inside. It has also water tray built in. This model is remix of my original double voronoi planter with redesigned base to make it more stable and also to make water flow…
UniTak3D Direct Drive Filament Runout Mount This is the 3D object that lets you mount the Filament runout sensor with the UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket . This is designed to work with the Original Creality Ender…
Lichtgevend jongens naam Isaac, Luminous boys name Isaac
The medium destroyer was one of the playable ships in the now defunct game Dreadnought. Medium Destroyer Destroyers are offensive ships that balance weaponry, survivability and maneuverability. The medium destroyer, built by Jupiter Arms,…
Náhrada za originální kolečko
Wall art: Never been enough (two colours) 20 cm
Předmětem projektu žáků 9. třídy je vytisknout pro spolužáky 1. stupně ZŠ 3D modely – „lízátka zpětné vazby/sebehodnocení“. Žáci 5. třídy je využijí v rámci formativního hodnocení při výuce.
Lichtgevende jongens naam Linus, Luminous boys name Linus
This is a two part wall mount for the Nous A5T Smart Power Strip (with Tasmota) that is suitable to mount this power stip to the wall horizontally or vertically. You can print this model in PLA at .25mm layer height, using snug supports…
This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…
This plate allows you to mount the Filament runout sensor on the right hand side of the Creality K1 making it easier to use a filament roll on the side of the printer instead of the rear. This plate uses the two screws that secure the…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
Tic Tac Toe in a box Easy to print without supports Print one base and lid, and 5x Cross 4x Nought Make sure you have 'print thin line' checked when printing Use some 1.75mm filament for the hinges Category: Games
Move your Kobra 2 filament runout sensor to the extruder with this mount! Placing the sensor closer to the extruder reduces filament wasted at the end of a spool, Great for top mounted spool holders and varies other locations. 3 Model…
This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…
Clean lines meet flowing floral patterns for your plants. Print Settings: Layer height: 0.16-0.20 mm Infill: 15% Size: 6 cm Opening Scale to 150% for a 9 cm Scale to 200% for a 12 cm Want to sell prints? Check our profile for a commercial…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Set of rails: Strainght in 2x, 1x, ½ and ¼ of standard length. Flexible rail in 1x standard length. Curve in 1x, ½ and ¼ standard length. Two way crossing in 60° and 90° Three way crossing Truntable in 1½ of standard length. Turnout…
This filament sensor has many advantages : It facilitate the filament change operations. When filament is detected by the sensor that triggers an auto load material function. Since we don't use the rear filament sensor, the reverse bowden…
Relocate your runout sensor to the top of the tool head. Works for Kobra2 Max,Plus,Pro -No supports necessary JST connectors (no soldering or modifying necessary.) Just plug 3 in line to extend: https://a.co/d/bYScS67 Use with this handy…
A filament guide that replaces the spool holder and enables the attachment of a bowden coupler/connector and the filament runout sensor. You can use the original screws for the attachment. Use PETG, ASA or ABS if you plan to have your…
A sample of my upcoming paid pack of climbing holds There are 8 sample holds for you to try which has been brought to you by my generous holiday spirit :) Sample Crimp 1 A medium size crimp with a moderate amount of incut but a small edge…
Noticed a hole in the side of the printer when considering airflow and leakage for stuff like ABS so I made this snap-in plug for it. Printed in SUNLU PLA+ at default settings.
designed to fit the ender 3 v3 Ke with the factory run out sensor. This shifts the spool 90 degrees and centers the weight on the gantry. there is a mount to use with the KE's factory run out sensor. you will need an additional m4 12 and…
Side mounted filament runout sensor. Requires two m3 x 8mm or m3 x 10mm bolts for printer. Make sure the thread is no longer than 10mm as it will protrude too far into the machine.
A simple runout sensor holder for Elegoo Neptune 4 Plus with two filament holders. Very useful for multicolor prints. Installation: remove existing holder fix with one of the screws the mount to the filament holder place the sensor screw…
PLEASE READ THE ASSEMBLY MANUAL PDF!!! Print Settings Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports
This mount fastens to the top M3 screw hole for the wiring harness anchor on the right rear of the ECC. There is a hole for refastening the anchor point for the harness in the model. However, it is not required since the design of this…
Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
This lantern is a really cool decoration for RAMADAN, I designed it in Solidworks, and I tried to make it as simple as I can, this design consist of 8 parts: Top x1 Bottom (with or without an electric candle) x1 sides x5 door x1 you can…
This end-of-filament sensor mount is solid and won't bend during retractions or under the tension of the filament spool. Please give it a ❤ if you like it 🥰
I print big things and the thought of wasting filament and time because suddenly, in the middle of the night, the filament runs out, is not something I am fond of. So I created a simple filament sensor mod for Voron's CW2 (RC1), using a…
It took me quite some time to find these “peaceful” wings. They belong to a guy called “hero”. Sorry that I cannot find the original source of this guy, checked Thingiverse and Printables for a couple hundred models again, but did not…
If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated! I'll be looking forward to interact with you guys and our shared passion for making! :)…
WWE announcer's table that breaks apart. I use 5mm x 3mm magnets to hold it together. The geometry of the table makes it extra tough so doing a power bomb directly on top of the table might not break it apart but jumping off the top rope…
This insert for Disney Villainous was my attempt to get all the current (Oct. '22) expansions in the base box as well as have some future-proofing. Considering the materials of all the expansions consist of a greater volume than there is…
Elegoo Centauri Carbon (new batch with slot and screw design). Offset the runout sensor to center of spool. Replace original center screw with m3x30
Galileo2 (G2E) with filament runout sensor. - ECAS-Fitting compatible. - Step file included. - No change in overall G2E dimensions BOM: 1x Omron D2F microswitch 1x 5mm steel ball bearing (optional) 2x M2x8 self tapping screws (You might…
This is an improved runout sensor housing for the Elegoo Centauri Carbon that uses 2 PC4-M6 pneumatic fittings on either end so you can directly connect a Boden tube to it. You can benefit from this if you use an external dry box, or…
This is a filament sensor holder I've made for use with bottom mounted spool holders for Sovol SV-08 3D printer (such as https://www.printables.com/model/901288-sovol-sv08-side-mount-spool-holder-v2 or…
This model remixes the right rear riser from the original “ JC-Creality K1 Lid Riser ” by Joe Cooper which must be printed for this to be useful. The rear mounted filament spool holder on the Creality K1 is inconvenient if not downright…
After I installed a BL touch I realized that I could use the z end stop switch as a filament runout sensor. It was basically a free upgrade and it's nice to not have to worry about running out of filament when you're getting to the end of…
Clicks onto the runout sensor and holds a PTFE adapter. No disassembly of the runout sensor, connect your drybox via PTFE tube for those moisture sensitive filaments. Versions available for PC4-M6 and PC4-M10 adapters. UPDATE 19-09-2025:…
I needed an inline filament runout sensor that I could stick inline between Bowden tubes on either end, but I wanted it to be as small as possible and require very few parts. I also wanted to only have to print a single part, and I wanted…
Add some stat buffs with the Spikesnout's unique abilities! This machine is to scale with the official board game and stands on a 45mm base. It is intended to be printed in one piece (with the base) for stability. All credit for character…
Support on Patreon! https://www.patreon.com/PrintedEncounter
As we've acquired all the Villainous expansions, the insert I made previously no longer worked. So, I decided to design a box for each villain. The boxes are more or less unique for each villain, holding their cards, token and other…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…
This bracket mounts the SV06 Plus filament runout sensor directly above the hotend, allowing it to detect runouts much closer to the extruder. The mounting hole on this bracket has been molded perfectly to accommodate the runout sensor,…
Floral reliefs for your pages. No AMS/MMU required, only one color change. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Matte Black) At layer 8 (0.72 mm), swap…
This is an addon for your stock OEM Spool Holder. Allows you to easily add a filament runout sensor. Was made with tight fitment so would not slip during use without using the tightener bolt hole on the side. Just added it as an extra…
Update: I made the ECAS hole tighter with the anchor groove from 8.5mm to 8.3mm and added STEP file Switches are Omron D2F or compatible. Ball is 5.5mm Selftaping screws 2x10 or M2x8 Tested with TPE88 filament. If you want use both…
This is a simple hinge that allows the filament sensor to rotate so filament can feed more smoothly. Required hardware M3x6 bolt, x2 Longer bolts work as well, they will just stick out. I used 8mm bolts in the photo. The head doesn't…
A quik design so you can connect a PTFE tube to the runout sensor in the Centauri carbon, im using it to connect it to my my filament dryer, just unscrew a little bit the sensor, then push the dapter and screw again. Use Supports Print in…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Since I don't want to feed the Qidi X-Max 3 with filament from the back or the left side, but want to use the run out sensor, I have created a small L-shaped bracket to bring the sensor to the side of the printer so that I can load it…
Dinosaur 3D puzzle of a T-Rex in 24 items. Printed flat on bed and glued together. Design is based on thingiverse.com/thing:21315, however the STL was in assembled form and I wanted them in separate pieces. So I cut them out in blender.…
my son ask for a green lantern luminaire, that can switch on when the ring comes near here are the result I designed many parts that can be glued together. Support printing is only needed for the half spheres, I don't know if other…
This luminous fox mask was designed by SUNLU, using SUNLU PLA Matte, PLA Meta, and PLA Glow In The Dark filaments. Inspired by traditional fox masks, this design incorporates modern 3D printing technology for a unique and appealing look.…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
This is a repository of .stl files that were used in the creation of a prototype axial flux synchronous reluctance motor. The video showcasing the motor can be found here: https://www.youtube.com/watch?v=SNQVJudd6BU Since the reluctance…
Attached PDF contains documentation on how to wire a Filament Runout Sensor using micro switch and a LED indicator for using with any 3D Printer control board, such as a RAMPS. Documentation contains basic configuration info for use on…
Introduction In a sea of various calibration models, I present a very easy to use, and free, calibration cross model that will get your Qidi Plus 4 as well tuned enough for dimensional accuracy as it practicable. Why do I say this? Almost…
If you want to mount your filament spool on the side of the K1C, you are still left with the runout sensor and the feeding of the filament at a very bad place, still on the back close to the printer. So I designed this very simple bracket…
Ender 3 V3 SE Mount for Filament Runout Sensor. Using the same screws that come with the sensor. Amazon Sensor (I use it with OctoPi - Raspberry Pi)
If you print from dry box, you don't need that tall spool holder anymore. But you still want runout sensor and this new holder/adapter will allow you to use the sensor in the original placement while cutting off the tall tower above it.…
A Gelatinous Cube draws near! 28mm scaled, so it will take up the standard 2x2 inch grid spacing a Large creature would. Both a standard version and a Dragon Quest slime variant are included, because why not? Edit: There was a request for…
UBBI mount adapter for Elegoo stock filament runout INSTALLATION GUIDE 🤩 Do you like the design? You can help fund innovations like this! Consider supporting me! Much appreciation given to my supporters, and you get exclusive access to…
I am looking for a filament runout sensor enclosure that fits my Omron micro switch. However, none of them I like and fit. So I just go ahead a create my own. Print instructions Category: 3D Printer Parts
After upgrading my Ender 3 Pro to the Sprite Pro hotend/extruder combo, I wanted to find a better way to support the cable and keep it out of the way. All the solutions I found out there had the ribbon getting mounted to the original…
A simple bracket for directly mounting the filament runout sensor to the Ender3 V3 KE instead of using the filament holder. Prints fast, and fits fine. The mounting hole might need a little reaming out in order to press-fit the metal…
Description Formbot filament runout sensor with modified holes for M10 threaded fitting connectors. Print Settings Nozzle: 0,4mm Layer height: 0,2mm Perimeters: 3 Supports: No Infill: 15%+ Material: ASA/ABS/PETG
This is a mod to use a switch as a filament runout sensor on WristWatch. BOM: 1 x Omron D2F 1 x 5.5mm Ball Bearing1 x Omron D2F 2 x M2x10 Self-tapping Screw Wires You will need the other parts to finish the assembly from:…
New fan shroud I designed to allow for the best airflow to the nozzle and be adjustable for volcano/non volcano setups. This allows for the use of the existing lower screw that used to be to hold the fan in place and now be used as a…
Created the provision to use a standard SHC M2x8mm screw to attach the switch.
I needed a mount that fit my runout sensor and allowed a PC4-M6 pneumatic adapter for a bowden tube running from my filament dryer. Uses factory screws for the upper spool mount and the factory screw for the runout sensor mount. EDIT:…
Disclaimer : this model is a work in progress and it may contain some dimensional inaccuracies. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM…
This takes the Bowden Tube mount and adjusts the hole to place the filament runout sensor closer to the extruder.
The bracket moves the filament run out sensor, down 20mm, forward 20mm, and tilts it towards the filament roll. This reducing the friction the filament runout sensor adds because the original orientation has the filament enter at too much…
Move your Sovol SV06 Plus filament runout sensor from the spool to the extruder with this mount! Placing the sensor closer to the extruder reduces filament wasted at the end of a spool, and frees up space on the gantry for a dual filament…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
Some of the other filament sensors weren't working great for me so I made this one. Space to fit some PTFE in each end to prevent the PLA from eating away at the print.
Being used with this model to route the reverse bowden tube out the back.
You would need to print: Shepa Mini Extruder adapter - only one part and swap from the original (5x M3x5x4 inserts needed for the whole mod) 4 lane adapter with runout sensor (I've printed one from transparent PET) Important information:…
If you screw off the backplate of the sensor, it will fit in the enclosure. You can optional shorten the tube on the top, like I did.
Un petit rappel de notre enfance avec la Linea d'Osvaldo Cavandoli. You can buy me a Tea (i do not like coffee ;) ) here https://ko-fi.com/olivier3dprint
Several easy upgrades for the Two Trees SP-5 (Sapphire Plus) as shown in the video below: Bowden Tube Guide (will need 2x M4x10 and 2x M4 T-Nut) Filament Runout Sensore Mount (will need 2x M4x10, 2x M4 T-Nut, 2x M3x20) Hot End Strain…
Chewie is the most gluttonous worm, passionate about all foods! Apples, zucchini... he loves it all. If you meet him, hide your snack! The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts…
A simple filament runout sensor made from re-used Ender 3 endstop. You gain the endstop by upgrading to an ABL probe. This remix is built on the OG model, just wanted to have a “floating” version of it, as my setup doesn't allow me to use…