2232 modeli
I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…
Wydruk około 9,99 €–12,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore --- I released a new version with only two screws --- Fits on Prusa MK3 MK3s MK3s+ Fasteners: 1x M3x20 screw 2x M3x10 screw 3x M3 hex nut 4x M3 Nyloc hex nuts 4x…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple tensioner for a tent guyline or paracord. I have tested the uploaded 3MF/STL files with 550 paracord (~4 mm diameter) as well as narrow tent guyline (~2 mm diameter) and it holds well. Should you need a different size, the source…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
Do you like stock design and don't like stock tensioner? Here is solution. Parts: -Stock idler sourced from Prusa Research -Compatible shaft is Ø2.9-2.99mm, 15-16mm in length. -2x M3 nylon hex nut -2x M3x18 Socket head screew Print…
Wydruk około 2,86 €–3,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 50x50 filler cover fits on the Balconera Series (50 or 80). You get two files: the one with the hole and one without any hole. Please note: despite all Lechuza filler covers look the same on the Lechuza site, they have different…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DANBY Air conditioner AC 7 Inch adapter, originally drawn for model DPA120B8WDB-6. SEE MY OTHER DRAWINGS FOR 15cm (5.91‘’) REDUCER Solidworks drawing and STL Attached. G-Code attached, used on an Anycubic Kobre Pro (G-Code is for an…
Wydruk około 23,76 €–29,03 € nettoWstępna wycena jednego wariantu
Easy PLA print - all buttons are accessible while in the holders, remotes are easily removable, installs with two small screws. Parametric OpenSCAD file (FanRemoteHolder.scad) means you can measure any vaguely similar remote & insert the…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
Original This is a replacement vent bracket for a Danby 12,000 BTU Portable 4-in-1 Air Conditioner. top ring inner/outer diameter = 122/126 mm middle ring inner/outer diameter = 131/135 mm bottom ring inner/outer diameter = 150/154 mm…
Wydruk około 5,05 €–6,17 € nettoWstępna wycena jednego wariantu
This Sanding Block is useful for sanding inner Corners (example Picture Frames). The Lower screw will fix the sanding paper, the upper Screw will tension the Sanding paper. Cut your Sanding Paper into 50mm x 170mm stripes. Printed in PLA…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
DANBY Air conditioner AC 7 Inch adapter/reducer to 5.9Inch (15cm) originally drawn for model DPA120B8WDB-6. Short and long Versions (I prefer the short one). Reducer to 5.9Inch (15cm) drawn because 7 inch ducts seem harder to find on…
Wydruk około 9,43 €–11,53 € nettoWstępna wycena jednego wariantu
Y-Axis Limiter / Stopper for dual MGN12H linear rails It is being sold under: “Upgrade Ender-3 V2 - Y Axis Dual MGN12H 300MM Linear Rail Kit Linear Mod ” Similar are to be found on aliexpress and others. After the chinese sellers: 2) For…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Congo Executioners Sword
Wydruk około 2,79 €–3,40 € nettoWstępna wycena jednego wariantu
Gewindeschoner-Halter für ein Paar Gewindeschoner und ein weiteres Paar hier für mein Break/Jump-Cue. Es werden keine Stützen benötigt. Ich habe Prusament PETG benutz kann aber auch mit PLA gedruckt werden. Schichthöhe habe ich 0,20mm…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tiny tensioner is made to tighten power wire around planters against the snails. But of course it can be used for other purposes. It can be released by lifting the spring at its side with a small screwdriver.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tomatoes, cucumbers, beans, peas,... any vegetable that needs stakes, this tensioner is ideal for tightening the ropes of your climbing vegetables. I have been using it for a few years in my garden and it works great.
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To make Slime Trap work properly you have to pour a bit of beer into the center of Slime Trap and close it with he cup. Into the enclosure around the center you put Anti-slug product. The aroma of beer will make them get close to…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
OneReach – Adaptive Back Grooming Extension for Philips MG5720 Achieving thorough back grooming is often a challenge – especially for individuals shaving alone or those with limited mobility. OneReach is a foldable, modular extension arm…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I created this model to anchor the luggage tensioners on the safety bars of my Riese & Müller - Multicharger 2. Safety bars - 4 corners This is the file with all 4 corners. Normally you should use this file if it fits your print area.…
Wydruk około 6,80 €–8,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description: Sometimes the chase for a mosquito or a fly takes longer as expected. Constantly keeping the finger on the button is exhausting, so there had a solution to be found. This gadget allows you to keep your Insekten Schröter or…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For my very small drawer I constructed an organizer for paper clips, coins and other small stuff that otherwise easily gets lost. For the model on the photo I used PETG filament.
Wydruk około 5,68 €–6,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Met deze leuke dashond heb je een handig en stijlvol opbergplekje voor je juwelen, pennen of andere kleine spulletjes. Je kunt het hondje ook rechtop zetten als leuke decoratie. Een origineel én praktisch hebbeding! With this cute…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Being annoyed by the crappy paper foil lid of the coffee whitener powder I use every morning, I have designed a minimal coffee powder lid with a portioning opening for e.g. "Gut und Günstig Kaffee Weißer" and other comparable brands in…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
This model is made to replace a broken plastic wheel on the Danby Air conditioner AC model DPA120B8WDB-6. Print file are made for PLA, but STL files could be used to reslice to print out of softer plastics to avoid damaging flooring. Once…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
This model was generated by scanning the original matching part by our Zeiss Metrotom CT Scanner at work by one of our Quality Engineers to save our IT department the cost of having to buy the whole assembly ourselves. Yes, it's a large…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Printing: Print can be done with rough settings, 0.25mm with a 0.4 nozzle are fine to go. The "Roller" part needs support for the lower side, since they have to be printed standing. Assembly: Just smack both halfes together, placing one…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
I made some changes to the original Design: Added Ender 3 version of Y-Axis tensioner Uses M4 screws and insert instead of M5 Made the bearing holders slide into their housings easier Extended the length of the bearing holders so the…
This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes. This will prevent the belt to wear unevenly and increase its life spend. Recommended Print Settings : Material : ASA/ABS Nozzle : 0.4…
Print-In-Place with no additional hardware required, making it's easily scalable up or down . All of the credit for this design should go to the original designer: https://www.printables.com/model/565344-automatic-rope-tensioner I've just…
An upgrade on the automatic tensioner. When I put up a tarp, I like to set my “static” line to a tree and then pull in a direction away from that static line (in other words: toward the tarp), so I made mine have a 180 ° degree turn back…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Functional lock picks tensioner: 1mm or 1.5 mm tensioner thickness 1mm fits most locks but is less rigid than the 1.5mm version Works best on smaller locks with less opening torque Note: Longer side is for bottom of keyway tensioning and…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”. There…
This is an easy and fast to print model. It requires no support. You need to print 4 pieces and then you can shove them on you tensionbelt and they wont fall off. There are differerent versions for different belt sizes.
This is a simple, printable paracord tensioner based on a similar design that's usually sold and made from anodized aluminum. I haven't tested yet to see how much load it can support, but should be plenty strong for camping applications…
This design represents a dental floss holder that fixes the main problem of almost all floss holders - tensioning! Floss tends to stretch almost immediately, causing handling problems. My design uses a movable part that serves the…
Functional lock picks tensioner: 1mm or 1.4 mm tensioner thickness 1mm fits more locks but is less rigid than the 1.4mm version Works best on smaller locks with less opening torque Use stiffer materials such as PLA, PLA-CF. ABS or PETG…
Every single rope tensioner i have tried has failed, so i have designed my own. Fixed many issues from other designs No points of high stress - Have not done long term tests, but with prior experience, PLA will easily stand up to long…
Update: anbei der Modellink zu thinkercad . Besonders in diesem Sommer hatte ich einige Update- und Remixanfragen zum Modell. Ich will das Modell mit euch teilen, fühlt euch frei es für eure Zwecke zu optimieren. Damit lässt sich die…
First model ive uploaded, probably the 3rd ive ever made. Not a cad pro, so please forgive me. I based this off a picture from amazon, using eyesight and a bit of maths. Both of which arent so good, so if its a little inaccurate i do…
History This part is actually a redesign of a surplus part to my magic strap buckle: https://www.prusaprinters.org/prints/84848-magic-strap-buckle-magnetic I got some feedback from a user that was very happy with the buckle, but had…
Here's my take on a fairly popular paracord tensioner. Simply tie a knot in the middle-sized hole, then loop a bight of rope through the large hole and around the small. (See pics for details) Check out my other rope tensioners! Rope…
Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household
Belt Tensioner for XY Axis on the Stock Creality Ender 3 Printer. For the Puller you can use a M5x30mm Screw. What need to be Printer: 2x - bearing_reduction 2x - tensioner_nut 2x - tensioner_puller 1x - X_tensioner 1x - Y_tensioner For…
print at 0.2 without supports change colors in the text layers
Updates: 16.11.2022 - add the X version for my linear rails. Test it with my custom mount but should work with an other models. PRINT SETTINGS 3-4 perimeters, 25%+ infill, a 10-15mm brim will help, outer part and knob could be from PLA…
I designed this to replace the existing rope tensioners that came with my tent. I've added three sizes, but you can scale the model as desired. Add some to your backpack in case of emergencies when camping or hiking or put a handful in…
Heyho :) Here is a tensioning device for the belt of the Y-axe. I have tested at least 4 different designs myself but was never really satisfied. Either the designs were too clunky, not nice to print, you had to drill holes or the…
A playful and discreet container designed with chill vibes in mind. Smooth, minimal, and character-filled, this little stash buddy keeps your goods hidden while bringing a touch of humor and personality to your shelf. Perfect for those…
Here's my take on the quintessential 3-hole paracord tensioner. Simply weave a rope through the three holes, then tie a knot at the end of the rope. This will allow you to hook the last “loop” around a post/stake and tension away! (See…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I just want to make the elegoo Neptune 4 max community lives a bit easier… i did not find on this site a Y axis belt tensioner stopper for my 4 max… but thankfully for the creators of thingiverse.com mk659 and SebastianRubner i was able…
What is galling? galling noun : a type of wear caused by friction between metal surfaces, often leading to parts sticking or seizing. Example: "Galling can lead to a nut and bolt binding under high pressure." adjective : extremely…
I recently noticed some cracks in the plastic of my Ender3 v2 X axis tensioner body around the front and back screws. And I really don't know why it happened.. I searched internet for a replacement part since I didn't want to buy the…
If you would like to support my efforts, feel free to buy me a beer Many people have struggled printing softer materials on the K2 plus due to the extruder chewing up these materials. Upon investigation, my belief is that the is, at least…
General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…
This is a belt tensioner for the x-axis of the Neptune 2 and 2S from Elegoo. Since the geometry and the structure of the X-axis differ greatly from the Ender, the complete body had to be rebuilt. Since the source data is not available, I…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
All you need is a M4/M5 nut, I recommend nyloc type in order to prevent unscrew due to vibrations. Print settings: layer: 0.16mm or lower perimeter: 3 infill: 15% - 20%
Use case Print a solid number of these tiny tensioners for your next camping trip, to make sure you have plenty of them if you need them. At 1.75g per piece, it will not be a burden, even if you are on a hiking or biking trip. Print them…
A simple cord tensioner hook to be used for guylines, ridgelines or lines of any sort when camping or during other cordage-intensive activities. I use (and recommend) it in combination with my BEEFY TRI-LOBE TENT STAKE CAP for a killer…
Y Belt Tensioner for Kingroon Kp3s This is a belt tensioner design for kingroon Kp3s, it is easy to assembly. Este es un nuevo diseño de tensor para el eje Y de la kingroon Kp3s, muy fácil de montar Other mods for Kingroon KP3s You can…
Once you printed the two piece you will need: -2 M4x8 bolts. -1 M4x30 bolt and nut -2 F688ZZ Flanged Radial Ball Bearings (cheap at Amazon)
An exact copy of the gcode simulation (minus some text) as a parametric & solid
A farmer, bar keep, bar maid, and half orc barkeep with a kitty! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page…
After replacing my X axis Belt tensioner I decided to change my Y axis belt tensioner too. Yet again another Quick'n Dirty remix of Cornaly_Cool's design https://www.thingiverse.com/thing:3289057 . You will need to use the original bolts…
6 spacers from 0.4 to 1.2mm thickness to loosen the extruder spring on the K2 Plus when printing with TPU filaments. Recommended to print in PETG, ASA or ABS due to being close to the hotend. Easy to install. Just pull the extruder tab to…
I needed a sturdy and small rope tensioner, so this is that. The arrows on the inside mesh with the roller, so that it can't spin freely once the rope is in the seated position. It is surprisingly strong. The clearence might be too tight…
Please see my video on how to print and assemble: https://youtu.be/_eJe7B8Vqws Parts list for one CFS unit (4 spools) 4× standard POM wheels 4x M3x20 screws 4x M3xL3OD4.5 heatset inserts • A complete set of four tensioners even fits on…
Y Axis Belt Tensioner Body for Ender S1/ S1 Pro to replace mine when it cracked. This replacement slides into the extruded rail to provide additional stability. +2/22/2025 Added File Ender3S1_GCR_Belt_Tensioner_Body_v8 specifically for…
Ender 3 or similar belt tension system. You can use Mellow pulley or cheap chinese pulleys (use spacers accordingly). Screw in M4 screw in “BELT_TENSIONER_INSIDE” part, length as needed. For belt tension use my belt tension knob from:…
The model has the same dimensions as the one from Foppemoa , but you can use with this design the original filter. My air conditioner is an Electrolux Chill Flex Gold (EXP26U758CW). The cover fits probably many more models of Electrolux…
Liked? Like for the sake of decency, do you think it’s easy to create modifications? Modification for belt tensioner Creality K1, K1C, K1 MAX Gives greater stability to the tensioner; with its help, possible distortions are eliminated.…
I like to keep some pens and notebooks next to my 3D printer. So, I designed this 3x1 component for the Gridfinity system to do just that. And it holds a few rulers too. It can hold 5 pens, up to 3 pocket notebooks (like Field Notes or…
Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament brand: 3D Solutech Filament color: steel Filament material: PLA
I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…
For 9 mm belts, print from PETG Prusament like original model
No need to run to the store or browse amazon for this one - just some glue and filament hold it together. Smooth operation. Easy and quick upgrade. Long lasting. No belt wear. Increases belt's grip on pulley gears. Clips to the top rail.…
I have designed a simple rope tensioner for camping.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** The cool paracord tensioner that @SD-3D created…
Based on https://www.thingiverse.com/thing:3289057 by Cornely_Cool, with only one modification: The top section towards the bed is cut away smoothly, to allow for the full 235 mm movement range on the Y axis / bed. Only works with the…
Designed this Minimalist x axis tensioner for my ender 3, i made it as small as possible to not have a distracting look when installed on the printer. It tensions using an m3 bolt/nut and an allen key. A couple notes: Since this is…
---------------------------------------------------------------------------------------------------------------- Greetings everyone, and thank you for joining me to explore my Auto Tensioning Spool Donor Mod. This innovation exerts…
** Updated 10/18/26 to add OEM Y-Axis tensioner housing model in Stock Parts ** I did not like the stretchy generic GT2 belts that came with the Neptune 3 Pro, so I set out to replace them with genuine Gates GT2 belts. Since I was going…
To tension the Y-belt just turn the adjustment knob. Designed for the GT2-20 pulley (15mm diameter) with 3mm axis. Printed with PETG, 15 % infill, 0,1 layer height recommended, 4 perimeter, no support needed. You need for installation the…
I recommend printing it in ABS, but PLA and PETG will work just fine. Its designed to be printed supportless, when you print it like a tower.
My tension lever cracked on my Ender 3, leading to under extrusion problems. This is a replacement part that I designed to not require any changes. The bearing screw hole is slightly undersized to allow the screw to thread into the…
Belt tensioner for ender3 based on this design. I remixed it to use an m5*10mm screw and T-nut to secure the tensioner. I also used an m8*25mm socket cap head screw instead of the original button head. I hope you like the models! If you…
cord tensioner.1 = grey one cord tensioner.2 = orange one Layer height: 0.2mm Wall thickness: 1mm Wall line count: 2 Infill: 100% Skirt/brim/raft: No Support: No
As I learned, the Y Axis Belt Tensioner Stoppers are absolutely mandatory for the Elegoo Neptune 4 series. The belt tensioner already looses while you print something… I have therefore adapted the dimensions of the familiar models and…
Love the remix that Comrade 3D did, but I needed to add a built-in tensioner to flatten out the wrap as it's being rolled. The existing model is great, but I found I needed a 3rd hand to keep things tidy - this remix is to help with that!…
This X axis belt tensioner is far easier to use than the stock Creality tensioner when doing maintenance. You can use the two stock bearings, M8 x 1.25 x 25 “axle” bolt, and one of the M4 socket head screws and t-nuts. Additionally, it…
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
