139 modeli
Created a simple sight cover for Vector Optics magnifier. It should easily snap into a magnifier and protect your lens. I used pla with 0,2mm layer height.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
# Picatinny siderail adapter ### Description/ Instructions This adapter allows you to mount your Soviet siderail mounted optics to western picatinny rail interfaces. There are 3 adapters included, one for a vertical picatinny rail, one…
Print with 0.2mm layer height ASA,PETG or even PLA works fine.
Printed with the Neptune 3 Pro in black PLA with 2mm layer hight.
Yes, it does come with a rubber sleeve in the box but it is so loose, that it comes off if you just look at it wrong. So i designed a more durable better fitting one. Two files to download to choose from, one with logo, one without.…
All I did was add a bit more length to it so it will fit an optic. Probably added too much but at least that allows for more compatibility. And my CAD is definitely not perfect. I used 4 of the linked magnets, 2 wide 2 tall and it holds…
This is a cheek riser that clips onto the Magpul Zhukov folding stock for AK pattern rifles. It is designed to put your eye in line with a micro red dot optic mounted on an RS Regulate mount. It holds up just fine with light use but I…
Bahtinov Mask for William Optics UniGuide 32mm
I printed this with a .25mm nozzle on the prusa MK3.5 It was pretty stringy so either printing with a .4 nozzle may work better but the hexagonal lines wil be a bit thicker. Print in the standing orentation with the clips facing up.…
Deutsch: Einfaches System um den ZWO EAF zusammen mit einem William Optics RedCat 51 zu verwenden. Durch die Montage unter dem Teleskop und die Ansteuerung per Riemen sehr Präzise und platzsparend. Es wird empfohlen, mit einem stabilen…
Designed for Vector Optics Maverick GenII (SCRD-12II). v4 front: This new variant has the polycarbonate piece at a slight angle to avoid reflections from the emitter, especially indoors with high illumination levels. Either a friction…
I have a new guidescope, for which I created this tiny Bahtinov mask.
A simple but effective protector for your optics on your Airsoft Rifle/gun. The only extra parts you need for this build are one m4 hex screw + nut, a m3 hex screw + nut and a piece of 2mm thick polymer glass ( fitting your needs) also…
Please note this mount should only be used in the first few months. Once the baby can move around in the crib this mount and camera can be a Danger if knocked and fallen on them. Also the power cable can be a choking hazard. So use…
v2 update: made the emitter openings slightly smaller (from ~3.5mm to ~3.2mm) made the openings at the top completely circular
I have designed this mounting shoe to be able to feet finder scope to my telescope. It matches the curvature of the telescope perfectly, as you can see in the pictures. Printed 4 perimeters to achieve stiffness, 25% gyroid infill on my…
This is a door sign from the AppleTV show Severance for the Optics and Design department. I scaled this down to 50% to print on my MK3S+ at a decent size. Use prusaslicer to add a color change layer for the lettering.
This is an adjustable stand for an Infant Optics DXR-8 Camera. The camera usually cannot angle down low enough and so this stand allows it to be adjusted to get a better view of the crib. It's ideal for travelling as it allows the camera…
This is a remix of the Prusa US version face shield. I extended the length of the frame to allow more room for magnifying loupes wear for dentists, I also closed the top part. Included with the design is the original chin piece and a…
This is a 9mm ammo holder designed to fit into a Holosun optics box. I tested it with a Holosun 508T box, but other optics fit as well, specifically other rifle optics. It was designed around a 120 mm x 90 mm box. It stores 70 rounds, in…
printed in pla, 0.28mm layer height, no supports
Chceš si na svou vzduchovku přimontovat optiku? Tento model je perfektní volba. Pro uchycení doporučuji nalepit epoxidem
Deutsch: Einfaches Montagesystem für das RedCat. Optional kann zusätzlich der Klemmring gedruckt werden, um ein Verdrehen der Taukappe und ein versehentliches Festklemmen des Helikal-Okularauszugs zu verhindern. Für den Klemmring werden…
This is a wall mount for the Infant Optics 360 degree camera. Its ring on top measures 67.5mm so other cameras and things could be placed on top of it. The power cable is a tight fit, but it does fit provided you angle it properly when…
A simple 2 piece design that allows on demand wall mounting without having to leave a big bulky mount on the wall. Designed for use in school gyms and auditoriums. Includes hot shoe mounts for any accessories. For us, its for a wireless…
Accommodates standard 1.25" telescope eyepieces up to 1.84" dia (46.8 mm) and 3 to 4.5" length (75-115mm). WIDER than the original model to fit eyepieces with wider bodies. TALLER (30mm additional usable) and MORE THREAD ENGAGEMENT than…
A remix of this excellent print: https://www.thingiverse.com/thing:5331416
The Packed Optics HB-7+ is a upgraded Lens-Hood for the well loved Nikkor 80-200mm f2.8 ED. It fits onto any Lens with the 77mm HB-7 mount. Lets be honest, the stock lens hood sucks, is too small, fragile and ugly. The HB-7+ offers better…
So, stock TS-Optics (GSO) monorail focuser has plastic body with those stupid curves and 0 extra holes. I didn't want to remake the whole part, so i came up with this. Print this part, add two M4 threaded inserts and sandwich it on top of…
20% infill 0.2mm height
My PTZ Optics Webcam has a little too big of a tab in the front, and it covers part of the screen on my new AW3225QF due to the small bezels. I designed this model to follow the 1700R curve and raise the webcam just enough as to not cover…
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
This is a Bahtinov mask with an integrated lens cap for the Lacerta 72/432 ED refractor. This is the same scope as the William Optics Megrez 72ED, or Levenhuk Ra R72 ED, so it will fit those, I added the clean lens cap without text for…
These models are meant to be printed in TPU with 3 perimeters and 4-5 top / bottom layers. If the Flex Material is too soft they may not stay open upright, but it works with the Overture TPU I have. Also if it gets too warm they may…
This is an optic mounting plate made for the CZ P10s, but should work for the P10c and P10f as well. It fits sights that conform to a C-More or Vortex Razor profile. It was directly tested with the Primary Arms GLX RS-15 sight, but there…
Nice looking parallax wheel. Quick and easy print. You will need a ~8mm M2.5 bolt and nut. The nut can be inserted after the print is completed and since it sits on the inside of the wheel, the entry hole will not be visible once mounted…
This is a project I have been working on for a while. I want to first extend my thanks for the original model, which can be found here: https://www.thingiverse.com/thing:2336754 This kit is designed to work on the Vernier Physics Track.…
PROTOTYPE, PROJECT Aborted Picatinny Rail Mount PROTOTYPE. Umarex UX SPA60/100. Clamps on, does not hold "Zero" if not glued on, will shift when firing. Does not block Iron Sights. I ended this project because of unsatisfying results with…
Infill 15%, use two magnets size 20x10mm. For rifles without optics. Heptagonal on th holder is for next optional as holder for optics, magazine….
Lens caps for the Vortex Optics Solo Monocular 8x36. They just friction fit into place.
This is a low-profile (2mm) plate for optics (Trijicon RMR) for Derya DY9 OR. It is likely to be made with CNC techniques, as PLA print is too weak for firearm use. The plate is intended to be used with 2BME inserts .
Scope Cap for Objective end of Scope. Specifically fits Customized model for the Athlon Optics Ares ETR 4.5-30X 56mm.
Infill 20%, print with support
Parallax wheel for VectorOptics Veyron 3-12X44FFP Rifle Scope is 52mm diameter ring to help focusing. It is a snug pressfit to scope parallax adjusting knob.
Fits my SW 5906, printed in PC carbon fiber blend, has survived 20+ rounds of target ammo and 10 of +P. 1st one was printed on a Prusa Mini+ and I was surprised how well it printed the carbon fiber. Needs just a cleanup with a fine file…
A low-cost optics kit developed for remote instruction. The kit uses 3D printed parts, 38mm diameter optical components, a cloth tape measure and a flashlight from Harbor Freight. Cellophane tape is placed on the flashlight for diffusion…
Infant Optics Wall Mount for DXR-8 Pro
Build in 2 parts so makes easier to print and give a good finishing on both, just divide it in objects when slicing
Maximize the capacity of inexpensive standard PMAGs for match day. This basepad and follower kit extends a standard 17-round Glock PMAG to 23+1 while remaining within USPSA Carry Optics dimensional limits. It reuses the factory spring to…
This simple model is a 2mm light slit, designed to be printed with an Ender 3. The part is 13x6x17.7 cm, and can easily block light from a smartphone flashlight or LED to create a thin sheet of light.
Probably there are better ways to do this (teflon film for example), but this mod is still better than stock. Main benefit is that if you have a 3d printer you already have all the parts. Completely degrease the focuser shaft and focuser…
Shims for my VectorOptics Frenzy 1x20x28 Reflex sight, which uses the TEK footprint pattern. Mounted my sight on my Chiappa Rhino and found that the height over bore meant I had almost completely used up my vertical adjustment. Comes in 1…
A holder above the worktop for a microscope camera from aliexpress, described as 36Mpix (it will probably fit others where the lens is of this type, on C-mount). camera bought here: https://www.aliexpress.com/item/32827892872.html plus a…
Designed to be used with the following mirrors, found on Amazon: Mirrors I found that printing the intended mirror surface face-down on the print bed helps for a nice flat surface.
Rear cap for Vector Optics Paragon 4x. Use Flex filaments
Scope Throw Lever with a 42mm inner diameter. Loosely inspired from https://www.printables.com/model/507645-clamp-on-throw-lever-for-athlon-btr-gn2-scope but these don't fit my scope, so I completely design it by my own. The knurling and…
Printed cover for Vector optics Frenzy Plus 1x18x22 Red Dot (SCRD-75) Printed in PETG-HF on X1C v.5 tighter fit will stay on till you want to pull it off
After searching and trying many other models for Continental or Veyron model scopes, they just never sat right. The knurling pattern used on the Sentinel is different and so the ring always sat on top of some teeth. After a few versions…
This is a fiber optics pole mount used to secure the fiber on a pole. You have to use 2 units of this on the pole to correctly secure the drop (cable).
This is a 0.8 MOD gear 65T for the 3" V-Power focuser of William Optics, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or ZWO EAF…
Mount for ZWO EAF (electronic auto focuser) onto WIlliam Optics Fluorostar 91
The BrickScope - a simple but powerful platform for microscopic discovery. BrickScope is a system of 3D printed parts that can be used to make a real, working microscope at minimal cost and no specialised skills. The BrickScope parts are…
Change the “UTADiameter” parameter with the diameter of your telescope tube for it to fit your tube. I tested this for diameters from 4" to 25", so it should work for any telescope tube in between. I use this same adapter on my 10"…
Model is of protection cap that fits between Reddot Vector Optics SCRD-M67 Frenzy plus (yes, they will enhance the character count in the future) REAR end. Print in TPU95a. Notches on sides are for fuddling in the protection canvas so the…
For use with "ADE Advanced Optics IWB Holster for Sig P365/P365 SAS/P365X/P365XL" . I purchased the holster from this link: https://www.amazon.com/gp/product/B09KNZ1GC6/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
Basic Vortex Logo. Prints easily with standard profiles. Adjust size and settings to your liking
Parralax or Focus wheel for Vector Optics Sentinel-x Pro 10-40x50 scope. Hardware needed: 1x M3 Bolt and Nut. It is fiddly to add the bolt and nut because I wanted a design that hides the nut and bolt as much as possible. Any feedback is…
Cover for T2 optics (m42)
Remix of https://www.thingiverse.com/thing:6612556 made by MrDeath_X1 "Arms" removed compared to original design Redesigned to be printed in TPU in mind. The little "slot" at the top should be able to slide into the Omega red dot and…
Smaller Profile full Parallax Wheel for Vector Optics Sentinel-x Pro 10-40x50 scope.
I came acquired an old University Optics 80mm kit built refractor. Unlike the Orion Ultrascan 80mm, it came with no provision for mounting any sort of finder scope. I don't figure too many people have this specific need, but on the off…
Etwas schönere Art die Unterputzdosen zu verdecken. Der Clip kann mit Superkleber in den jeweils passenden Abständen aufgeklebt werden. A visually more attractive cover for power flush-mounted 68mm blind boxes. The clip can be stuck on…
Covers for the front and back lens of the vector optics paragon 1x16 sight. (I previously had marked this incorrectly as 1x18, sorry about that) The two pieces are designed to be joined by a slightly tensioned bungee going through the…
This is a stereoscopic optics for raspberry pi camera. This allows to map two images (left, right) to one camera image. It is possible to put it on a VR-headset to have stereoscopic vision. I tried it with a google-cardboard-like Phone-VR…
I wanted a wide angle lense for my VAVA baby monitor but the ones made by VAVA were out of stock everywhere at the time. I ended up buying one for the Infant Optics DXR-8 and making this adapter as my foray into solid modeling and 3D…
Simple quick to print ring, to allow easy zooming on the Vector Optics Veyron Scope, or any other scope with 30mm caps. You will need a ~8mm 2.5M bolt and nut. The nut can be inserted after printing. I printed it with Formfutura's…
Printed in TPU. Fits over eyecup for protection
Optics Raise, ris. Raise you optic to play in airsoft mask or helmet.
This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and two M6-1.0x10mm screws for the Ultra-Cat 108 tube mounts. The scope's tube…
Compact and stiff mount to put a William Optics guide scope onto an Askar 600 astrograph.
Gridfinity 1X3X3 filled box modified to hold the Fixit Sticks Scope Jack and Optics Bubble Set. Been working on the bench top tool kit and wanted to have these items as part of plan.
This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The controller is mounted horizontal relative to the telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and four…
Simple Vector Optics Frenzy S cover
Happen to lose your Holosun optics box, but still have the lid around? This is a replacement box. I've found that so far, all the Holosun optics box use the same lid size, so this should fit universally. There is a 0.2 mm clearance so…
Model is of protection cap that fits between Reddot Vector Optics SCRD-M67 Frenzy plus (yes, they will enhance the character count in the future) forward end. Print in TPU95a. Notches on sides are for fuddling in the protection canvas so…
may need minor sanding but the parts should push fit together snugly and not need anything else to secure it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 15%…
Thanks to this holder, you can fix Ocean Optics spectrometer to any board. I used mini foam tape to make it tight and absorbing vibrations, but it is not necessary. From the side there is option for inserting a press nut (M3), then USB…
This mount attaches an ASIAIR Plus controller to a William Optics MiniCat 51 WIFD telescope. While the scope's tube clamp provides a location to mount the controller, this mount repositions the controller so USB cables attached to the…
This is a replacement dust cap designed specifically for the William Optics UniGuide 32mm Guide Scope. Whether you've lost your original cap or just want a spare to keep your optics protected from dust and scratches during transport, this…
Same as before, but now with täggtiggäl 1 point sling attachment to feel like Jason Statham Model is of protection cap that fits between Reddot Vector Optics SCRD-M67 Frenzy plus (yes, they will enhance the character count in the future)…
The blaster needs to be supplied with compressed nitrogen gas or dry air with a pressure of roughly 80 psi. The air flow is split into a high-pressure and low-pressure (20-25psi) line with a secondary gas regulator. A trigger mechanism…
Designed for 0.25 mm layers and to print without any support when oriented as modelled. Cylinder diameter is 31 mm, with four ridges that protrudes another 0.5 mm. The brim is 3 mm high and comes in diameters of 35, 40 and 45 mm with plug…
William Optics Wedge adapter for ZWO TC40 tripod Category: Hobby
This is my first attempt of making a jig for my middle school students to use during the Optics event of Science Olympiad. In that event, they are to place mirrors and predict where a laser beam will go. They have only a few minutes to…
A set of mirrors to mount on top of the Vernier angle ruler . Mirrors with different curvatures should reflect laser pointer light in a different ways. You can use cloudy water in a glass, smoke or vape steam to visualize laser pointer…
This is an addon ring to fit over the parallax/focus ring of a Vector optic scope for an air rifle, the internal diameter is 32.1mm and there's an hole to add a tightening M2.5 screw. I printed mine in ABS to better handle a hot summers…
This is a cover that fits over the eyepiece of the Vortex Recce Pro HD 8x32 monocular. Why? The stock cap works well while you're carrying it on you, but if you toss it into a backpack or suitcase it will invariably pop out. The monocular…
Hi, i designed this 3D model for the U shaped sensors based fiber optics as myself worked on a tubidity meter and salinity meter for water constant monitoring, this 3D model helped us fix the sensor for better accuracy and precision as…
This bracket holds the Hubble Optics artificial star and mounts it to a standard 1/4"-20 tripod screw mount. The laser uses a vixen dovetail bracket that mounts to the bottom vixen rail of an SCT. The laser is used solely to point the OTA…
