Wyniki wyszukiwania: p32

esp32-case

OpenSCAD sedigned case for the esp32 development board. Thanks to Sergio Vilches for the rounded corners!

ESP32 case for ESP-WROOM-32D

I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.

Sól: OpenDTU (ESP32 / NRF24L01+) case

I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…

ESP32-C6-DEVKIT-M-1 Case

Print both the lid and the body. The ESP32-C6-DEVKIT-M-1 can be pressed in and should be held in by friction. The tolerances are designed for this purpose. I printed it on my Ender 3 with Prusament PLA Galaxy Black and 0.2mm Layer Height…

ESP32 Audio Kit V2.2 Housing

The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…

ESP32-Camera arm-mount for MK3/MK4 and other 3030 aluminium extrusions w/ t-nuts

This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…

Seed Studio XIAO ESP32S3 Sense Housing

This 3D enclosure is designed to securely house the Seed Studio XIAO ESP32S3 Sense, providing both protection and easy access to key components. The compact case ensures a snug fit while leaving essential ports and sensors exposed for…

ESP32-CAM Mount for Prusa MINI (X-Axis stepper motor)

This is an enclosure to mount an ESP32-CAM on X-Axis stepper motor. LONG CAM CABLE NEEDED! (I used ov2640 with 75mm cable). Inspired by similar mounts for pi cams and customized for ESP32-CAM and Prusa Mini. Case is the same in both…

XIAO ESP32s3 (Sense) Camera for Prusa XL

————Required Hardware———— Item Cost Seeed Studio XIAO ESP32 S3 Sense ~$24 IKEA Lillhult USB-A to USB-C Cable ~$5 Old Apple (iPhone) 5W USB power adapter ~$0 5 × M3-0.5x8mm Socket Cap Screws ~$4 I pick the Seeed Studio XIAO ESP32 S3 Sense…

Keltec P32 Magazine Speedloader (and P3AT)

Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…

XIAO-ESP32S3 reset and boot

The reset button on the XIAO-ESP32s3 needs to be pressed many times when developing firmware, but it is small and difficult to press. I created a shield to make it easier to press. I'm using Normal flow head.

Fast print case for esp32

A minimalist esp32 case, prints in 11 minutes Update: Added experimental 5m vase mode version of body.

ESP32 v4 433 case

case for ESP32-DevKitC V4 (ESP32-WROOM-32D) and rf 433mhz Superheterodyne modules (regular modules have components that can interfere with those mounts) requires: 2x m3 nuts 2x m3*8 screws some supports required for main body possible…

OpenDTU Housing with 1,3 Zoll OLED, ESP32 NodeMCU and NRF24L01+

A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+

ESP32CamCaseV2pt2

printed at 99% scaled size to create tight fit on the ESP32-CAM Opening the provided ESP32CamCaseV2pt2.3mf file with PrusaSlicer will enable you to view the negative volume modifiers I used, and allow you to create your own gcode for…

Wago 221-420-to-Breadboard Box for 1-Wire, ESP8266, ESP32, Homeassistant etc.

Connection Box for Wago 221-420 to Breadboard – Sensor Integration This enclosure provides a clean and robust interface for routing multiple sensors via three Wago 221-420 (10-slot) connectors into a 400-pin breadboard (84 × 55 × 8.3 mm)…

ESP Home IR-Receiver (ESP32 CH340 KY-022 IR Receiver)

Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…

Case openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+

Case for openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+ Find Board here: AllianceApps DTU Adapter PCB - ESP32 zu NRF24L01+ Printed: Printer: Prusa Mini+ Filament: Prusament PETG Nozzle: 0.6 Profile: Prusa predefined 0.15mm…

Philips EP2220 (EP3243) Kaffemaschine_Verschlusszapfen

Der Bohnenbehälter verstopft immer die Schraube des Shredders. Für die Demontage bei Problemen immer ein Gefussel.

Breakout Board Case ESP32

This is a simple case for an ESP32 Expansion/Breakout Board. Not so much a case as a guard for the bottom of the board so you don't worry about the contacts on the bottom touching things. It is designed for the ESP32S 38P/V4/Goouuu…

Prusa Mini Horizontal ESP32 Camera Mount

Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…

ESP32-DevKitM-1 Case

This is a case for an ESP32-DevKitM-1. It retains access to the pin headers. The case is designed to be printed without supports and the lid is fixed with two M3x8 screws.

Core One Camera Case for ESP32-CAM

Just made a wider bore in the frontpart (10.2mm) for a 120° Wideangle Camera. All other parts remain the same. Camera: https://de.aliexpress.com/item/1005007291555550.html

Assembly for ESP32 and HCSR04

I started with [thingiverse/thing:3738687 by SantiMZ], and added an assembly for the ESP32 and the associated electronics. All parts are inserted in a standard PVC pipe which is fixed on top of a water tank. A mobile cover protects the…

10-inch Rack Panel for ESP32 2.8" Display + USB Keystone | MSD3sign V21

For:

Gridfinity Stand for Feather ESP32 with Reverse TFT

About I've got two Adafruit ESP32-S3 Reverse TFT Feather and without any enclosure or stand it is a bit inconvenient to use them, especially if you have a lot of other tools on the messy table :D Thus I mixed gridfinity bin 1x2x2 from the…

Snug case for ESP32-CAM

I designed a case how I needed it for my setup. The ESP32-CAM fit very tight on all side in the case. There are shims on the front and back cover so no movements are possible in any direction. The back pins are also completely inside the…

ESP32 Max v1.0 Garage Door Housing w/Relay

This is a basic box to mount an ESP32 Max v1.0 Development board (Arduino UNO Clone) with a single channel 5V relay and a BMP280 temperature sensor (should work w/BME280 as well) to interface with a garage door opener utilizing a…

esp32 Network Blocker (Internet Kill Switch) - Project 1

enclosure for the ESP32 Network Blocker (Internet Kill Switch) - Project 1 as found here: rlatour.com/esp32networkblocker

RFID-Leser + Summer Kombigehäuse für Arduino / ESP32 Zugangskontrolle

Dieses 3D-druckbare Kombigehäuse wurde für ein 3,3V RFID-Lesemodul und ein Summermodul konstruiert. Es eignet sich ideal für Mikrocontroller-Projekte mit RFID-Erkennung und akustischer Rückmeldung, z.B. Zugangskontrollen,…

ESP32 Honeycomb Case - Push together, no hardware/tools required!

I made this case to hold an ESP32 DEVKIT1 (which I used to hold a Wi-Fi/BLE Surveyor ) Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15+ Supports: No Print Orientation: Default as modeled Features: No hardware…

esp32 Network Blocker (Internet Kill Switch) - Project 2

enclosure for the ESP32 Network Blocker (Internet Kill Switch) - Project 2 as found here: rlatour.com/esp32networkblocker

Jig ESP32WROVER

ESP32WROVERと秋月電子2.54mmピッチ変換基板をハンダ付けするさいに使用する治具 セットして、裏のベタグランドを手ハンダする。 自具が変形しないよう、最小に

Resin Mold, Molde para llavero con esp32

luego de quemas mi placa e no quise desecharla, asique decidí darle un uso decorativosp32

Housing for ESP32 -Openthread-Borderrouter

Made some kind of enclosure for my Espressif ESP-openthread Borderrouter. Also added a cover for the RJ-45 module. Info: https://docs.espressif.com/projects/esp-thread-br/en/latest/hardware_platforms.html

0x2a's Baseframe for Waveshare's 7inch ESP32S3 Touchscreen

This Baseframe for Waveshare's "ESP32-S3-Touch-LCD-7 800x480 Pixels Rev1.2" has a tight enough fit to look good from the front but also allow for some print imperfections. Printed without supports and default settings (0.4 nose, 0.2 layer…

ESP32 Gehäuse AhoyDTU

Gehäuse mit im Deckel verbautem OLed Display (0,96") für ESP32 und NRF24 Antenne; Software AhoyDTU für Hoymiles 1500; extra größer dimensioniert, um die Verkabelung zu vereinfachen

esp32cam mount for nozzle ender 3

ENG you will need 2 types of Double-Sided Tape, I use 3M VHB 4910 12mm Deli-E30407 Double-Sided Tape with the "E30407" you need to tape the "triangle" to de esp32cam board and cam with the "3M VHB 4910" you tape the esp32cam to the "body"…

Glowing Quartz Crystal Cluster — WLED & ESP32-C3 (v1)

//A bottle of Jack and creativity to start So basically, it’s a lamp... a lamp in the shape of quartz. I was looking for something with addressable LEDs, and it didn’t exist, so I had to make it for you. I tried to make it as simple as…

ESP32-CAM Case

Has cutouts for illumination LED and camera, as well as buttons on the side for the two buttons on-board.

ESP32-WROOM-32 (USB-C) Box with Lid

ESP32-WROOM-32 Box (USB-C) A small box with snap-fit removable lid for the ESP32-WROOM-32 development board. Pins are still accessible from the underside via two slots. Please note this is for the 28mm x 52mm (approx.) PCB, this is the…

ESP32 Case

If you want to support my work, just buy me a coffee: paypal.me/predypavlovic Case for ESP32 dev board No screws required Ventilation openings Can be mounted without unplugging the circuit board Includes housing with and without pin…

ESP32 Devkit V1 "Chunky" Case

ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection. IF you want a version…

CASE ESP32 2432S028 USB-C Module - Cheap Yellow Display (CYD) / CYD2USB

Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.

ESP32 C3 Super mini MODEL

ESP32 C3 Super mini 3D MODEL - .STEP - .f3z

ESP32 camera case

This case is intended for the Articulated arm mounted on the Original Prusa printer.

ESP32 D1 Mini Case

I was inspired to design this ESP32 D1 Mini case after writing a blog about using the ESP32 D1 Mini and ESPresense to incorporate room-specific presence detection in my Home Automation . After using someone else's design, I thought it'd…

ESP32 C3/C6/H2/S3 Super Mini Case

A basic case for ESP32 Super Mini boards. Lid clicks in place quite firmly. With optional pass-through for wires. Most Super Mini boards have 18x23 mm dimension, some are slightly longer. 23mm and 24mm are available here, use the OpenSCAD…

ESP32 Cam Case

I got inspired by https://www.printables.com/model/286528-cam-case-for-esp-32-wifi-cam Unfortunately, the files that come with it are unusable and thus I started to design my own. The whole assembly is a tight fit to ensure a good…

P320 M18 Blue Gun/Red Gun/Training Gun

Minecraft Ore Lamp (WLED / ESP32 D1 Mini USB-C)

A Minecraft Ore Lamp powered by a USB-C ESP32 D1 Mini and a WS2812B LED Ring , running WLED for full RGB lighting control. Bill of Materials The lamp was designed to perfectly fit the following components: USB-C ESP32 D1 Mini from…

Enclosure for Sunton ESP32-2432S028R Cheap Yellow Display

This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…

Everything Remote - ESP32 Powered Universal Remote

🎉🎉 PARTS KITS ARE NOW AVAILABLE HERE 🎉🎉 Build your own universal smart remote! This project turns a simple ESP32 and tactile buttons into a powerful, battery-powered remote for Home Assistant — perfect for media control, lights, scenes…

ESP32 Case

The original had some odd open space so I closed that up. It should snap fit but if not a little piece of tape or a dab of glue will do. This is my favorite case for ESP32's that don't have anything connected to the pins.

ESP32 2.8inch Touch IPS CYD LCD Screen Case

ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…

Teyleten Robot ESP32-S3-WROOM-1 Case

This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…

ESP32 Cam housing

Housing for ESP32 Cam modul (Tinker board) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,2 Infill: 100% Notes: After printing you can use female breadboard connectors with the plastic…

ESP-WROOM-32 ESP32 Case

Case for ESP-WROOM-32 ESP32. The lid snaps on without any screws or glue and has openings for pressing the buttons with a paperclip. The base is deep enough to keep the headers on the board, although I de-soldered mine. There is an…

ESP32-WROOM-32D Dupont Case

This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…

Presence Sensor Case - ESP32 C3 Super Mini + LD2410C Radar mmWave Sensor for smart home

Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…

Case for ESP32-C3 SuperMini and LD2410C

Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…

ESP32-Devkit case

I'm using these esp32-devkit boards as ESPresense sensors: https://www.amazon.co.uk/gp/product/B08LGNV6V6 I just wanted a box I could put them in so I didn't have bare electronics around the house, and I couldn't be bothered ordering some…

P320 FCU (airsoft)

100% Accurate Frame Model (for airsoft)

esp32-cam OV2640 focus adjustment wrench

I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…

ESP32 DEVKIT V1 BOARD 30 PIN

ESP32 DEVKIT V1 BOARD 30 PIN: STEP F3D PARAMETRIC MODEL: USB C OR MICRO USB B WITH PIN OR WITHOUT PIN

XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera)

WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…

Seeed Studio XIAO ESP32C3

🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…

ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R)

Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…

ESP32 dev-module 3d model

This 3D model of the ESP32 WROOM-32 development board is slightly enlarged for better 3D print quality, capturing key details like the ESP32 module, pins, surface-mount components, USB Type-C connector, reset/boot buttons, and mounting…

ESP32 CAM Rover with robotic arm

Modified stair climbing rover to carry a robotic arm. Mounting is in the lower frame, servos are rotated 90°, covers and frame have cutouts for the robotic arm. The ESP32 CAM with external antenna is mounted in the top cover, through…

Seeed XIAO ESP32-S3 Case

Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…

Esp 32 Gehäuse esp32 case

Ein einfaches Schutzgehäuse für den Esp 32 mit dem Vorteil das die Pinout Belegung noch ablesbar ist.

Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case

You shoul use a 4 M3x10 screws to secure a screen to the case.

ESP32-S3 devkit

Model of the commonly used ESP32-S3 devkit to be used when designing cases, devices, etc.

Case for Sunton ESP32-2432S028 2.8" TFT-Touch Board

This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…

Holder/case for ESP32-C3 with OLED display

I needed a small case for this particular ESP32-C3 board offered with integrated OLED display on AliExpress. I use it as a cheap, tiny display with ESPHome and Home Assistant to present small amounts of sensor data directly at the…

ESP32 CAM Case With Tripod Mount

Remix of the ESP32 Cam case by mojocorp . I really like their design, however I wanted the following. Printable without supports Room for Dupont connectors Tripod mounting hole Increased rear rim thickness The shape of the original looks…

Seeed Studio XIAO-ESP32-S3 Case

This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…

ESP32 DevKit V4 Case (OpenScad)

I couldn't find a ready made case for the type of ESP32 I had ordered, so I made my own. This fits a 38 pin version of the ESP32-Wroom-32D with built-in antenna, labelled DevKitc V4. There are two versions of the body: a thick version…

ESP32 Devkit V1 Case

Case with Snap-on lid. Lid has detents for buttons. Case has cutouts for USB, LEDs and pins will stick out of back of case. If you want a version of this case where the pins are fully shelled/enclosed - see:…

3D Model for Seeed Studio XIAO ESP32C6

Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…

ESP32 DEVKITV1 ESP32 WROOM Case 2 in 1

This case can be used to store or actively use ESP32 DEVKITV1 or ESP32 WROOM The bottom holes are to push the ESP32 Board out of the socket. Also ,the top can be mesh for better heat dissipation. NOTE : For the version with buttons use…

ESP32-Wroom Box

ESP32 Wroom Box Close with snap clips (press fit) Please be sure about the ESP32 board size: 26x52mm Different manufacturers have different board sizes. BENEFITS: Fast to print Easy to use Small & Strong Designed for FDM Printing Smooth…

ESP32 CAM CASE

ESP32 CAM CASE - it can be used for 3Dprinter time lapse https://www.aliexpress.com/item/1005001322358029.html?spm=a2g0o.order_list.0.0.21ef1802HnQU5g Material : any Supports : no Layers : minimum 2 for cam firmware can be used this…

ESP32-WROOM-32U Casing

ESP32-WROOM-32U Based WiFi Repeater Utilizes the ESP32-WROOM-32U module for powerful WiFi repeating capabilities. Enhanced signal strength with an external antenna (IPEX connector) for optimal performance. Firmware based on ESP32 NAT…

ESP32 NodeMCU Dev Kit C Case

Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…

Heltec ESP32 Lora V3 Case

I took the previous model and updated it for the newer USB-C connection and made room for an antenna on the case.

Smallest possible ESP32-CAM

The ESP32-CAM enables you to build a complete webcamera and is available from under five bucks! Here's some great info from someone on youtube https://www.youtube.com/watch?v=MicAM_A0_lU There are a bunch of ESP32-CAM cases available…

ESP32 Cheap Yellow Display (CYD) Enclosure with Pen Holder

I loved the original design, but I wanted a holder for the little touch pen that came with my USB-C CYD. Here's the result! Requires 2-4 M3x6 screws. Socket-head fit flush, but others will still work. I'll add an adjustable 2020 extrusion…

ESP32 Case

I got myself some ESP32 to use as a bluetooth proxy in Home Assistant and needed a case for them. The ones I found online were not really what I was looking for or weren't for the board version I got. So I designed a case myself. It is a…

Gridfinity ESP32 Holder

Just a simple gridfinity bin for storing ESP-WROOM-32 devboards. You can download the STL if you just want to print it easily, or the negative stamp if you want to replace the base gridfinity bin with a different version (like one without…

ESP32 Project Enclosure with OLED SSD1306 0.96"

Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…

ESP32-WROOM-32 (USB-C) Box with Lid, Trimmed

Snap-fit closure for ESP32 board, with pins available for prototyping purposes. This remix of the existing model removes the material between the pins inside the box. Printed beautifully using Inland PLA+ with a 0.5mm nozzle at a 0.28…

ESP32 38 pin breakout board case (snap-fit lid)

Designed this case with a snap-fit lid to fit a 38 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…

Meshtastic Seeed Studio XIAO ESP32S3 & Wio SX1262 case

This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…

ESP32 CAM case / enclosure / mount using modular mounting system

Fits the AZDelivery ESP32 Cam Module Board. There's a good chance other branded boards also fit. Snap fit enclosure Enclosure has holes for the ESP32 cam board pins to hold it in place Use some glue or double sided tape to attach the…

Scout32 ESP32 WiFi FPV Camera Rover

Due to the large number of files, they are archived in zip format to preserve folder structure. Notes, Fixes, and things I forgot to include in this release. I forgot to include the decorative cab plating in the ScoutXL files. Please use…

ESP32-WROOM-32D Dev Board Model (Parametric - Fusion 360)

I needed this to design a case for a WLED board so thought I'd upload it for others. It's Parametric (has parameters you can change for every measurement) so you can easily tweak it for your specific board. Hide the aerial if it doesn't…

Snap-fit case for Seeed Studio XIAO ESP32S3

Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…

ESP32-CAM with ESP32-CAM-MB Housing

So I bought a few ESP32-CAM & ESP32-CAM-MB boards with those cheapo 3MP OV2640 lenses for simple uses, such as seeing when the mailman comes. If you'd like other options than the simple example code offers from the Arduino IDE and SD card…