3450 modeli
This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds your PTFE tubes from the MMU2/MMU3 nicely parallel - which helps to reduce friction. The part does not actually clamp the hose, but the friction should be enough to hold it in place. The model allows you to choose either an M3…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
I wanted a quick and easy way to remove the PTFE tubes from the back of the Prusa MMU2S. I found that loading filament and clearing jams is so much easier when those tubes can be easily removed. The material doesn't really matter, as…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This a guide for your Ptfe tubes on the top of Prusa enclosure. I make it for my (un)original prusa drybox systeme. 5 Spool rewinder adapter for MMU2S / MMU3 in (un)original Prusa drybox :…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Because the filament is fed into the MMU unit at quite an angle in my buffer arrangement, I sometimes had the problem that the filament was pulled in by the pulley in such a way that the Idler output PTFE tube was not met (indicated by…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am using the Sunlu Dryer for storing and using my filament. But the simple hole for letting the filament out is not enought. To fix this I designed an adapter to connect a pc4m10 or pc6m10 (conical) pneumatic connection. The hole being…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
PTFE Tube Cutter This cutter cuts PTFE tubes with an outer diameter of 4 mm. The printing time is less than 50 minutes and the assembly time is about 1 minute. The PTFE Tube Cutter is a remix of my filament cutter (see here ). The…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
This is my rework of Prusa MMU2 PTFE Tubes Separator by fucosk https://www.thingiverse.com/thing:3166394 I just rounded off the corners a bit
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model PTFE hose anti wear for Bambu Lab P1S, P2S & X1 The PTFE hose anti wear where you see it starting to wear the hose is always making contact with top glass. PETG or PLA and (Recommended ABS) Thank you ;-)
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
I probably won't use this for my final setup but someone might find it useful. Use the plastic rivets to secure it to the top of the enclosure. I made sure there was clearance. It's designed to be used with the PTFE tubing that comes with…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits M10x0.75 fittings. Hardware required is 4xM3 socket head bolts and matching hex nuts. Added a STL for a TPU/TPE seal if the surface isn't even but I haven't used it.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sunlu S2 Dryer PTFE low friction filament guide - no drilling, no glue There are many PTFE filament guide adapters for the dryer but this one: Guide filament in most natural way from the roll to the PTFE tube. In fact it is in parallel…
Wydruk około 0,27 €–0,32 € nettoWstępna wycena jednego wariantu
You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance. Replaces the old tiny metal bracket.…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Version 2.0 link here PTFE tube holder for Prusa MMU2S. You can easily screw M10 passthrough fittings and use double-sided tape to stick it wherever you want. This is a remix of this object: https://www.thingiverse.com/thing:3233579 I…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
https://www.prusaprinters.org/de/prints/22339 Ich habe die Vorlage genutzt und für Ruthex M5 Buchsen und Festo Steckverschraubung optimiert "Happy printing" Print instructions MMU2S Rear PTFE Holder Es handelt sich um einen Remix von:…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This connector fits into the opening of the Polymaker PolyDryer dryboxes and attaches to the smaller 4mm PTFE tubes. This is useful for boxes that are equipped with an auto-rewinder spool and ensures the tubes are not pulled inside (this…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Numbered Beads to slide over a 4mm PTFE-Tube. I've used it for my MMU2 and a IKEA LACK-Table to mark my five PTFE-Tubes slided to the Table--Top.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
This is an attachment for the original Prusa Mini spool holder which allows adding a PC4 M10 quick release adapter for a common PTFE tube. Primarily I use this for a reverse bowden setup on my MK3. Printing: any solid filament 0.2mm layer…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: PTFE Bushing for Table IKEA LACK This model will help you safely pass all five tubes through the IKEA LACK hollow table for your MMU upgrade. Even if the enclosed nuts have a sufficient margin of tolerance, I recommend cutting the…
Wydruk około 4,20 €–5,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Funnel to help you guide filament into PTFE tube. Holds the PTFE tube firmly in place. How to use Utilizes Festo M5-4 fitting ( MMU3 spare part ) to firmly hold the tube in place To be fixed with thick doublesided tape Designed to be used…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
10mm Screw and Nut with a tight Lead-Thru-Hole for 4mm PTFE-Tubes
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
This is a remix of Prusa's mmu3 PTFE tube manager that lets you screw it into the wall.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Simple holder and input for MMU2. It is designed for IKEA Lack enclosure. This holds PTFE tubes without fasting. For assembly I use 14x M3x10mm and 2 universal screws.
Wydruk około 4,76 €–5,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
E3D's mount for upgrading the Prusa MINI+ with their Revo Micro hot end, modified with an added strain relief for the PTFE tube. This version requires two M3 square nuts for a more secure connection; grab them from your spares bag! Prints…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created these PTFE Tubing Straighteners to help straighten out PTFE tubing (4 mm outside diameter) that has been coiled up since manufacture and wants to continue to be coiled up tightly when you need it to be straight (or at least…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
To be used between CoreOne and your drybox. Easy to install, easy to use. Just few grams of filament and few minutes to print. Instal with bigger chamfer towards the printer. Check internal opening for smooth filament movement in and out…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Based upon the Prusa Enclosure PTFE-tube Guide by Karza. My remix is a Dual Reverse PTFE-tube Guide. The guide is meant to provide an extra roll of filament in the ready for filament color and runout changes. Please Like and Post your…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Combined Extended and 15deg PTFE connectors
Wydruk około 1,09 €–1,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
easy and fast to print nice to have little helper
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
EN: Bracket for fixing the PTFE bowden cable to the Prusa i3 frame This holder helps guide the string so that the PTFE tube does not pinch between the extruder and the frame. The model was inspired by the PTFE tube guide on the MMU2 unit.…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a fully 3d printable variation of the magnetic connectors for my dry box connections. unable to find something resembling the brass push connectors, I found firstgizmo 's model and remixed it with Line Arc Line 's tri magnet…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Ich habe die Halterung um 90° zu den von PRUSA gedreht, damit die Führungen besser an einander vorbei kommen. Zusätzlicher Halter für 4+6 mm PTFE-Führung für Soft TPU Drucke. Bei Soft TPU unter 85A ist der Widerstand in den langen PTFE…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For my Ikea drybox mount I needed a filament pass through for PC4-M10 fittings which don't stick out of the drybox. So I made this model for the 10,6L size Ikea 365+ container for two filament spools. Printed in PLA with 0,2mm quality…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
I underwent surgery to fix my nerves in my elbow recently and I have come to learn that PTFE retainer clips are really annoying and borderline impossible to use if you have dexterity problems. So I designed one that would be sufficiently…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Two different PTFE-mounts with 3mm-holes. I didn't like the print-orientation the original model forces you to use, so I remixed it.
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: Optional
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein weiterer Y-Adapter für das 4mm PTFE Rohr, mit Innengewinden. Einfach zu drucken. 0,2 mm Schichtdicke. Achte auf die richtige Ausrichtung und die erste Schicht im Kanal, sodas die erste Schicht im Kanal in Zugrichtung verläuft dann…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I’ve designed a PTFE tube holder that can be mounted using two screws. This holder is perfect if you're using a ceiling- or wall-mounted filament spool holder. I also recommend printing a small funnel-style guide that makes it easier to…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Close the slots on the left and right side of the enclosure, provided that the holes for the PTFE tubes are not broken out. You need the following parts to mount one cover: 1x M3 8 mm Allen screw 1x M3 nut The model is crated with FreeCAD…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to add some PTFE push-to-connect adapters to my filament dryer. This was what I came up with, and it works great. You will need to drill a hole to allow the filament guide to pass through along with a hole for the faster to bind…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Das Beladen des Filaments zum Buffer ist wegen der Beengtheit erschwert. Mit den an der Decke montierten weiten schwenkbaren Einlass-Trichtern wird dieser Vorgang erleichtert. Durch die Zwangsführung in der Mitte der Spule wird ein…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
Hier eine Möglichkeit den MMU3 Buffer aufzuhängen. Ich habe die Strebe an den Segmenter geklebt. Die kleinen haken in entsprechendem Abstand an die Wand geschraubt und schon kann man den Buffer einhängen. Da es sich in meiner…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Schnellkupplung für schnellen Filamentwechsel PC4-M10 Gerade Pneumatik Fitting Print instructions For better fitting use some glue on the thread.
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
For Esun little box 1.75 mm mouthpiece Pour Esun little box 1.75 mm embouchure
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
0.4mm nozzle with 0.2 layer height works great. Cut two 6mm long piece from a 6mm diameter filament PTFE tube and put it inside the insert.
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
remix of small PTFE holder for original prusa mmu3 spool holders. the adapter is for another spool holder (MADACO)
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on PTFE connector (Un)original Prusa Drybox (magnetic quick connect) from @Af76 . Since Amazon doesn't sell the smaller collets that come with the MMU3, this design uses a larger size. It also allows you to mount it to a surface…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
THE ORIGINAL FILAMENT GUIDE IS REQUIRED TO HOLD THIS IN PLACE!! A quick model I put together since I was starting to get annoyed with the extra tubes coming out of my S4 just lying around and getting tangled together. There's a version…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hold that slippery PTFE tube without kinking it, good aide for putting on ferrules or olives.
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Custom Design (Remix of PTFE-Tube Holder) for somebody
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Halterung für 4mm Rohr und PC4-01 M10 Steckverbindung horizontal Schrauben sollten m4 oder M5 sein .
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…
Simple button to make removing the PTFE tube from the AMS buffer a little easier. There are 2 versions. One is a permanent install, and the other slips over the tube so it can be removed.
V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…
Update 03.01.2022: version v3 is available. The bend radius has been changed to roughly 40mm to address the binding issue, which could create problems when loading stiff/rough filaments. Update 29.12.2022: added new version…
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
This coupler allows you to join two ends of PTFE tubing together with magnets! This will be useful if you want to have an airtight connection between two PTFE tubes but still want to be able to pull/push the filament inside sometimes. I'm…
PTFE Guide for K1 extruder No supports needed. Improves filament guidance to the extruder Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate
On the new ELEGOO Centauri Carbon's the PTFE tube running into the print head is way too kinked and causes loading and printing issues. If you have one of these machines please snip the small zip tie at the end of the tube guide and…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the older style of AMS feeding funnel that has a slim press button.…
6 minute print. quick and useful little tool for removing the 4mm ext dia PTFE tubing from my FlashForge AD5X printer. Tested it and its works great for me!
This guide holds the filament tube vertical as it enters the top of the extruder. It is a remix of a design by Way2Do. I strongly suggest adding a riser to your printer to provide extra clearance above the extruder. I had to replace the…
11/11/22 - this model has been updated to a V2, as the V1 version was found in some instances to be making the problem it was designed to solve worse rather than better. V2 has a greater radius for the filament, less of a downwards angle…
NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…
PTFE Guide for Anybucic Kobra S1 extruder No supports are needed. Improves the orientation of the filament for extruder and protects the ptfe from friction with the housing You can buy me a coffee with a donation. Me puedes invitar a un…
This connector needs no extra hardware parts and is used to connect your bowden tubes together. Due to its mechanism, one is able to connect/disconnect the tube by simply twisting the screw cap a little. If you have to modify it to your…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
Simple jig for PTFE tube cutting (4mm OD), having: 60° (30), 90° (45) and 120° (60) degree chamfer tool (works like pencil sharpener) Length of 13, 15, 19, 35.3, 38.8, 42.3, 43.4, 44.2, 50 and 66mm cutting tool Needed tools: Sharp blade…
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
PTFE Tube Remover Introducing our small PTFE Tube Remover. Engineered for effortless use, this compact device ensures a easy way to remove your PTFE tubes with its user-friendly design. *Print settings: 0.1mm layer height BENEFITS: Fast…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … If you want to use your A1 (mini) without AMS lite the cable…
This tool is used to remove the PTFE tube from both ends of the Bambu Lab filament buffer or AMS hub. *Edit - I added a hole for a magnet to hang it on the back for storage. Thanks to djwhouse for the idea. There are options for circular…
This is a 20° bracket that guides the ptfe tube of the P1P to run the same as X1/C. This can be used standalone and as part of the Arc for the P1P. The holes for M3 are meant to be self-threaded so I do not need to use an insert. The hole…
This is an experimental bracket supplied by Bambu Lab for testing. It helped me, but your mileage may wary. The bend of the tube is extremely sensitive and may prove too much resistance for it to load or retract properly. Do note that the…
Material: PETG Layer height: 0.2 mm Nozzle diameter: 0.4 mm READ!! Few people said the clip was too loose, maybe because your printer has better tolerances. I made change to the model so the opening is smaller and the grip is better tha…
I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…
This is another 4-in-1 tool for 3D printing in the style of my model https://www.printables.com/model/191102-spatula-3in1. With this model you can cut 1.75mm filament at 45° and 90°. You can also cut the PTFE tube at 90°, and you can even…
See video above for installation on the Ender 3 V3 KE, the same method can be used to install on the Ender 3 V3 SE. Replace your top mount spool holder with this PTFE tube guide to remove the heavy spool from the top of your frame which…
CZ: PTFE adaptér pro podavač tiskárny Snapmaker U1 - Bez demontáže originálního krytu podavače - Tisk bez podpor - Tisk bez závitu pro PTFE konektor - Výška vrstvy 0.16mm - Tryska 0.4mm - Čísla vstupů v modelu - Materiál PLA Doporučuji…
This model combines the functionality of both an AMS PTFE tube and cable release tool into one simple small part. Can be stored hanging behind the end of the cable (see photo) ≤0.2mm layer height. 6m45s print time Also available on…
Notice! This is only compatible with original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the newer style of AMS feeding funnel that has a thicker press button.…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
Update 16.10.2023 a new version with the direct guide is included to make the job of change filament easy. Update- 05.12.2023, i just add a rotative tool for the PTFE guide and two exit for the filament one on the top and one on the side,…
Design This is a lightweight(under 14 grams) twist lock PTFE disconnect which uses (2) 6mmx3mm rare earth magnets(see below regarding actual thickness) to hold a locking position and (2) PC4M10 or (2) PC4M6 pneumatic connectors. I kept…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
Allows PTFE tube to run through printer frame for use of lid
17.12.2023: I advice to not use additional tube clips because they restrict the movement of the PTFE tube too much, what can lead to colission. 14.10.2023 ADDED V2 I modified the support structure to add a bit more clearance to the wire…
ToolHead PTFE Guide V4 The Toolhead PTFE guide V4 rotate effectively to follow the movement of the toolhead and provide a smooth curve to the PTFE tube, reducing friction with the filament. /!\ Don't use PLA, use PETG or a plastic that…
This is a gasket for the back of the Centauri Carbon where the PTFE Tube enters the back of the case. Hopefully this will prevent premature wear of the PTFE Tube.
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
