861 modeli
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Holder for Aqara/Xiaomi door magnet sensor for gas meter used in Europe countries. Reads the magnetic impulses and parsing them using in HomeAssistant for measuring the gas usage. Disassemble the Aqara sensor (carefully so you won't…
Lusail Plaza Towers are a set of four office towers on the Al Sa'ad Plaza, Commercial Boulevard, Lusail, Qatar. The two buildings are 301 metres (988 ft) and the two others 215 m (705 ft) high and has 220 floors in the four towers…
This is a hidden screw-in wall clip for an Aqara Door and Window Sensor P2 , including parts for the sensor and round magnet. Design features Minimalist clamp holds the sensor and/or magnet in place instead of the built-in adhesive.…
Bracket for attaching the Aqara motion sensor to the wall or to the included hook that fits on (my) stairwell. There is a recess in the hook for inserting a magnet.
Blocks can be placed in the corresponding holes in the lid. If you work in Quality Assurance, you will notice that all the shapes can also be placed in the square hole, as shown in this video that inspired the design:
I designed these LGBTIQA+ beads and Rainbow Flag pendant in Tinkercad. You can print as many as you like to make bangles and necklaces. And you can use the pendant as key-ring. You can print these in any filament you like. You just have…
Parts list: 2 Magnets in 5x3 mm I experimented with smaller magnets but they did not give me consistent results, but the thicker Base fits nice. If anyone wants i can make one for Round Handle Bases, just leave a comment. Assembly…
Antivibration feet for MK3x printers and other printers using 3030 profiles. Needed for assembly: 1x M3x18 1x 3030 M3 T slot sliding nut 1x Sqash ball
This model is for the Aqara Door & Window Sensor (affiliate link), and helps you level the two pieces inline with any door or window trim. My door has a ½ inch trim that frames it, and makes it not possible to keep the two pieces of the…
Beautiful smooth VTX Antenna Mount for QAV-R quadcopter frame. Also compatible with QAV-210. Print Settings Printer Brand: TEVO Printer: Tarantula **Rafts:** No Supports: No **Infill:** 60% Filament: BQ PETG White Notes: Support me on…
Inner part to fit Aquara Dimmer EU H2 into Gira Frame. By resizing of the inner negative form it can be adjustet to different switch types
Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…
A collection of mounts for various Aqara sensors. Will grow as I get more stuff. Prints solid, no supports, large surface down (lock ring upside down). Can barely see them if printed in white. Mounts will work with or without tape…
Corner Bracket for mounting Aqara FP2 Presence Sensor into a corner. You can use the metal plate and fix it with the screw or the 3M. I have print it with Prusament PETG on a Prusa MIni and 20% infill.
This is a reference model of the A2212 Brushless quadcopter motor. This model's not meant to be 3d printed but should hopefully save some people time designing other stuff. You can view/download the Fusion 360 project here...…
Designed for supportless printing with 0.6mm nozzle and 0.2mm layer height. Overhang angle is 25°. Mount holes accept 2.9mm flat head screws.
The protection was created due to the lack of cover from meteorological conditions. The manufacturer recommends covering from rain. For those who use an angle pad, an auxiliary plate must be added between the cover and the angle pad. At…
The most useful and easiest way to adjust your z-height.
I wanted to get a notification, when I needed to change silica. I remixed @Thomas_63847 model to fit my Aqara Sensor. Printet with tree support.
I've created this waterproof case for my sensor. It is o) easy to print (no support needed) o) easy to assemble - just 2 M2 Screws o) no specials needed - just a standard a rubber ring o) easy to mount (zip tie or double sided tape) The…
Mount for an Aqara temperature, humidity and pressure sensor. Provides shade from direct sunlight and some protection from the elements. Suitable for use in a sheltered location such as a porch or balcony. The mount has a single hole for…
The bracket features 2x 4mm mounting holes for screws to mount the bracket to a wall. There’s a hole underneath the camera for a standard ¼” screw to mount the camera to the bracket. The bracket has a slot in the bottom for the USB-C cable.
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
I have many Aqara Zigbee thermometers around my house and it's a pain to change the batteries once a year. Two AAA batteries should have much more capacity than CR2032 cell. This case houses the sensor and two AAA batteries inside. It…
Simple corner mount for Aqara Presence FP2. Assembly Insert metal circular plate from Aqara Presence FP2 box (good enough fit, no glue necessary as it will be hold by magnet anyway) Glue double side 3M tape on areas touching the wall or…
A decorative housing for outdoor mounting of the Aqara temperature and humidity sensor. Includes ventilation grill at the bottom. Prints without supports.
A wall mount for the Aqara IoT Button
A corner bracket for the Aqara FP2. I wanted to cover my whole room with the FP2, unfortunately the FP2 can only see 120 degrees, for the whole room it should have been 180. So I decided to mount the sensor in the corner. To make this…
Sensor holder for Xiaomi Aqara Temperature sensor. You can get it easy out for battery change.You can stick it to the wall or use some screws. I printed with ABS. If you print with PLA there can be some space between sensor and case…
i wanted to know when my wooden backyard fence's gates are open, so if the mowers or poop scooper people leave it open, i'll know with automation. these are ugly and low effort, but they work. these are for wooden fences, and the holes…
I created this one to save some space in the house [: I have used a black generic PETG (from 3DN) for printing. #nosupports are needed Like what you see? Click an image below and…
I hate to glue these sensors to the wall using attached double sided tapes. I'm using this minimalist mount to fix them.
Flat nozzle flow for Aqaurium loc line. Works perfectly with projects like 3475413 : https://www.thingiverse.com/thing:3475413 busse de ssortie plate pour loc line pour Aquarium. Fonctionne parfaitement avec les autres pièces du projet…
Other mounts were comprised of multiple pieces, lacked sufficiently large/deep wall mount points, and/or lacked exterior ring to support magnetic attachment, so here's another corner mount for the pile. Enjoy. Updated to V2: Mount holes…
Door lock spacer for a Smart lock form Aqara Model U200
Needed a fast and easy to print mount for the Aqara temperature sensor. You can mount it with screws or dubble sided tape. Print Settings Printer: Flsun QQ Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10%…
Honeycomb Storage Wall Mounts for some common Thermometer / Hygrometers: Xiaomi Mijia Aqara WSDCGQ11LM Common Rectangular Hygrometer All print in given orientation without supports. ♥ Looking forward to your makes! ♥
I designed this part to fit my DJI O3 Air Unit. As you can see on the pictures the big ass box fits right behind the cam. I used double sided sandwich tape in-between to stick it to the upper frame part and secured it with a zip tie. I…
Automatically adapting to different material dimensions. Square ranging from 10mm to 150mm, round from 10mm to 120mm.
Use with 4x M3x20 screws (DIN 912) 4x M3 (DIN 562) square nuts Mount on wall with double sided tape
Would you like the shades to move up and down at a faster rate? I've created a parametric pulley specifically for the Aqara roller shade driver E1, and I've included STL files for pulleys with 6 to 18 teeth. The speed of the shades is…
Holder for temperature sensor from Aqara. The sensor just slide in the holder and can be placed on shelf or furniture. Print settings: PLA Layer height: 0.10mm
Hinge to mount an Aqara Zigbee magnetic door sensor to a tilting garage door - it opens under gravity when the door is open. Use M4 screws to make the axle for the rotating sensor support. Usable also with other sensors with a similar…
This is remix of Stamos fantastic Hifiberry Case . The original model was modified as follows dimensions were adjusted to IQaudio DAC Pro High-Fidelity-Audio-Output-HAT the case was extended in height to allow using the GPIO pins a hole…
Outdoor shell that fits Aqara G4 doorbell for some additional protection from the elements. Not waterproof, but if water does get inside, there's an opening on the bottom, so that water won't be trapped. Work in progress, so I'll gladly…
Printing advises: Print with brim 0.25 mm nozzle is best layer height >0.15 mm Print in orientation shown on picture 3
Holder / case for Xiaomi (V2) Aqara Door sensor and magnet. For the V1 (round) version, see https://www.thingiverse.com/thing:2791484 . You can get it easy out for battery change. You can stick it to the wall or use some screws. I printed…
Remix to fit Aqara P1 Sensor
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
🇶🇦 مرحبا بكم في قطر Welcome to Qatar! This model was made by Dany Sánchez . In the deserts of the Arabian peninsula, any source of material that can help the small agricultural production in the harsh conditions is welcome, so centuries…
Wall mount support for aqara FP2 with 45° angle. Follow me if you like this
EN: This is a print-in-place swivelling and rotating wall bracket compatible with the Xiaomi Aqara RTCGQ11LM motion sensor. The Xiaomi PIR attaches directly to the rotating base of this wall bracket, replacing the original battery cover.…
A simple cover to protect your Aqara temp/humidity sensor against the elements. I've included the step file for easy alteration and remixing. I used tape, but you may want a mounting hole through the back.
This is just another wall mount for the Xiaomi Aqara motion sensor. I wanted a simple holder that I can stick to the tiling in the bathroom. Print Settings Resolution: 0.2 Infill: 10-15% Post-Printing Put some double sided tape to the…
Tried most grips that are available for 3d print, but this is the one I like the most. (Thanks Qaz!) Like the quick release and no bulky tray to hold the laptop. But not a big fan of the loose hinge. So I moded it to use M3 screw as a…
Steeper 40 degree mount for Aqara G4 video doorbell
The Aqara G4 Doorbell uses a digital chime and their solution is to adhere it with a sticker to wherever you want. I wanted to mount it near a outlet but also mount it to the power adapter and not stick it to my wall. I found a mount that…
This is a quick and easy mounting bracket for the Aqara Motion Sensor P1.
i'm making some mounts for my aqara door/window magnetic sensors. these are the models i mocked up for the sensor and magnet, so i can model around them. i figured i'd post them so anyone else modelling something related to these sensors…
Description: Yet another simple Filament cleaner, that snaps together with four 6x3mm magnets. Nothing special, but i got somewhat annoyed by my current hinged one, when switching through filaments in quick succession. Of course i could…
USE AT OWN RISK! The sensor is not meant to be used outdoors! However I tried to find the best compromise between protection of and genuine values. Use white filament if on hand. Sample printed with ASA. No supports required if printed…
A small stand I made to hold my FP2 upright on a table
Update V2: Change screw holes diameters from 3mm to 5mm Newbie to 3D printers, this is my first release. I need to improve printing quality so don't judge the pictures. A simple cover for this Aqara G4 video doorbell, with the hole for…
My handle has 92mm centres (spindle to lock centre) and is the type where the top screw is below the handle. My handle's dimensions are 32mm wide, 11mm deep and the bottom of the handle is 79mm from the lock centre. To adjust, open the…
The cover is for the keyboard of the Aqara U200 lock. You can use it if you don't like the original black color or if you want to protect the keyboard from the sun. The cover is intentionally a little wider so that you can insert foam for…
With this case you can use the Aqara Tempreture Sensor outside. For damage on the sensor, I assume no liability! Print Settings: 0.20mm layers PLA / PETG 15% Infill No Support Print the design upside down! Printed Parts: Outdoor Aqara…
This bracket holds an Aqara Wireless Mini Switch and makes it super easy to mount on a wall. The switch fits into the mount with friction and is removable. Update: Added a thicker version of the mount for newer 13mm thick buttons. This…
Having experimented with various designs I found online, I eventually decided to create the ultimate corner-mounting bracket for the Aqara FP2 presence sensor. Through a series of trials and adjustments, I perfected the design to achieve…
Modified stand to add a second fan to the rear of a NerdQaxe++
I wanted to mount the Aqara Sensor to my skids wall. I used the very good T-Clip System from Line Arc Line. To get it low profile enough, I used the low profile mount clips from tchoupshop. You will need one of the clips from here:…
Print bottom down (what would be the bottom if it were mounted on the wall). Use brim since that surface will be small. I suggest this orientation because it will require no supports and the print should be dimensionally accurate printed…
Mini rain-protection roof for the Aqara G4 Doorbell. Prints without supports in 1h45 (35g of filament). My doorbell has seen some medium rain since I installed it and it is good so far, I can't guarantee anything obviously. The back is to…
Based on a Stevenson screen design, this modular box will protect a Xiaomi temperature and humidity sensor from the elements. You'll need to print 4 middle pieces to get the right height. The top, bottom and middle pieces snap together,…
I have two cats but I didn't want to buy and coordinate two pet feeders, so I designed and printed a splitter. This design is based on my previous WOPET splitter , I just finally upgraded to a name-brand pet feeder and needed to redesign…
I recommend printing the “bell” side as the first layer, we get an clear surface to stick the frame on its factory double-sided tape.
A simple way to alternate the look of your Aqara U200 with a new front plate or cover. Printing tipps: enable “Only one wall on first layer” in quality settings (Bambu Studio / Orca Slicer) for a cleaner look center and then rotate the…
A simple outdoor housing for the Aqara G2H camera. After testing a Aqara camera outside under a awning for a while I wanted a housing so that the camera could be hung at other places as well. Borrowed some parts from Nano Vise V2 by PRIma
FR : Cet accessoire a été conçu pour vous avertir chaque fois que votre boîte aux lettres est ouverte, vous permettant de savoir exactement quand votre courrier arrive (lettre ou colis). Plus besoin de vérifier constamment si le facteur…
Simple mount for the motion sensor from Aqara. The sensor is tilted 10 deg down.
Der Halter gibt einem die Freiheit den Aqara FP2 so auszurichten das er den Raum bestmöglich abdeckt. Das ermöglicht die montage an mehreren Plätzen so wie es am besten passt.…
A corner bracket for the Aqara FP1. It probably also works for the F1E, but I haven't been able to test that yet (you can perhaps report on it in the makes, I would definitely be pleased :) ). In my profile you can also find a version for…
I designed this case in Fusion 360 for an Aqara door sensor mainly to use it for projects where I use this sensor as a general purpose zigbee sensor and I prefer something a bit smaller. There are 2 versions, one with a hole and one…
Fantasy Sword Zulfiqar Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Fantasy Items here: https://www.printables.com/@StudioMechanik/collections/2975356
This is my take on building an compact outdoor case for the square Xiaomi (Aqara) temperature sensor. I think it is the smallest that I could find and still be usable. Until now it is functioning perfectly. I printed in PLA without any…
The Aqara Cube is a cool little Zigbee device which detects flip, rotate, shake and tap gestures. It enables the user to create automations depending on which side of the cube is facing up, however, only 2 of the 6 sides have identifiable…
My mount for Aqara vibration sensor with added spring to enhance minor vibrations. I needed it to trigger the sensor inside the post box becaue it was too solid to register a delivery Added a V2 with an additional bend for more sensitivity.
I modified the original model to increase the size so it would accommodate larger zigbee temperature and humidity sensors like the ones from Tuya and Sonoff. I have also added a column off the back of it that includes a mounting hole so…
DJI O4 Pro air unit antenna and camera mount for QAV-S Mini Antenna mount Test print use Bambu lab P1S 0.4mm nozzle and eSUN eFlex TPU-87A TPU with support Camera angle is limit by top plate or need to move the camera forward Camera mount…
You can choose holder with one or two mounting holes and with or without roof. Můžete si vybrat držák s jedním nebo dvěma montážními otvory a se stříškou nebo bez ní.
This jig allows you to securely clamp inner and outer corners at 90 degrees and 45 degrees on your woodworking projects. This can also be used as a square to check your work. Print as strong as possible for best results. (infill % and…
A simple outdoor housing for the Aqara Temperature and Humidity Sensor (Zigbee), based on the case from Andos . The case fulfills its purpose and protects the sensor from wind, rain and direct sunlight. It is also relatively compact, not…
Mount with a screw inside the corner tip.
A simple base/riser to bring the sensor and its counterpart to the same level. Raises the sensor by 2cm (thickness of the door). No special print settings necessary, most common default settings should work. Ein einfacher Sockel um den…
Small holder for Aqara window/door sensor. This holder is very tight designed and uses very little wall material to make it as small as possible but still having some stability (but don't expect too much). I use it to put it inside my…
The Aqara U200 is a newly released retrofit smart lock, but its keypad design presents a significant security flaw. The keypad can be easily removed and stolen due to a release pinhole that allows anyone to detach it from its wall mount.…
You can either print it in one piece (complete) or print front and back separately (front and back) - for less supports - and glue them together.
Because black color of Aqara Doorbell G4 does not fit to my house, I created simple cover which hide most of doorbell black color. It also helps to keep temperature a bit lower. Printed from PLA, no supports.
Holder for Aqara switches. I find it more convenient if the switch is not glued to the support, so I removed the adhesive sticker from the back. I used the other biadhesive that comes with the switch on the back of this support. Print it…
