Wyniki wyszukiwania: ronic

Lamp Bulb Idea Electronic Circuit wall art

Try printing at 80% of speed and very hot bed (75° ?) Best R

Spudger Set (Electronic Disassembly Tools)

Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…

Precision Tweezers (Electronics & Clockwork)

A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested

Prusa MINI Z-Top | Electronics Box Lid

Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…

Electronic Dice

Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction

Electronics Sorter Box with IKEA SKADIS mount

This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…

Skadis - Knipex Pliers - Electronic Super Knips

Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.

Prying Tools for Electronics (Spudgers)

Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…

Small-Parts organizer box (Electronics, screws etc.)

Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…

Mini portable electronics workshop

Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…

WERA electronics screwdriver holder

Simple holder for Wera electronic screwdrivers.

Electronic Enclosure

Electronic Enclosure Master Template by Andreas Spiess: https://github.com/SensorsIot/Project-Box-Templates Great Idea To have a Paramteric Master for Project Boxes you can vary quickly! Thanks a lot! Youtube:

3D-Printed Electronic Snowflakes using WS2811 LED Strip

Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…

Raspberry Pi 1/2/3/3b/4/4b/Zero/2/W Standoff for electronics placement

A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…

Case for Uctronics UC-595 7 inch LCD Display

I wanted a thin case for my 7in display. This is about as thin as it can possibly be. Has cutouts for some of the parts on the board so it can mostly lie flat against the PCB. It also has holes in the back for a vesa mount. I used this…

Jtronics Jet Boat Moded Propeller

I have runed this boat with 2205 brushless motor and 2 x 18650 lion and was fast as hell. To build this awesome boat check the original link below https://cults3d.com/en/3d-model/game/rc-mini-jet-boat

Battery cover for Electronica - LR44

Printed with PLA, nozzle 0.4mm, layer height 0.15mm. Included G-code is from Prusa Slicer for MK3S printer. Satin Powder-coated Sheet by Prusa3D.com used for print.

TOPEX Vice Jaws for electronics

Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…

Electronic Tape Measure for Component Reels

This is a bracket that fits a $20 electronic tape measure from Amazon. This bracket holds 8mm wide component tape. I highly suggest using "snug" supports at 0.2mm contact distance, and use top surface ironing for best fit. Search amazon…

TaoTronics-Ultrasonic-Cool-Mist-Humidifier Replacement Duct

Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…

Electronics Enclosure SKR v1.4 Turbo BTT EXP-MOD

This is a work in progress and will be updated as I finish my build and dial in the part. Custom enclosure for Big Tree Tech SKR v1.4 Turbo main board and BTT EXP-MOD stepper motor driver expansion board. The cooling fan used is from the…

Prusa MK1 Electronics Box

Old, but still great PrusaMK1. Yeah, I love it. Here is electronics box, which is not included in the original repo. I've included Fusion 360 file. Photo used from Prusa Guide for MK1 assembly.

Jeep Cherokee Trailhawk Electronics Cover

There is a hole to the left of the trailer hitch on the Jeep Cherokee Trailhawk meant for electronic things. If you don't have those things, you can use this to cover that up (could also hide something in it turning it into a “secret…

Key dummy for electronic locks | Schlüsseldummy für elektronische Schließanlage

If you have a eletronic lock system of a well known german Manufacturer, you can open unchecked (coded red) door locks from inside. This is not an error but a known function. So you do not need the original key to lock and open your…

Tronic charger wall holder

Simple wall holder for Ni-MH / Ni-Cd charger Tronic (Lidl) TAL 1000 A2. You need two pcs.

Low profile screen stands for Beetronics screen

The “connectors” option from Prusa slicer was used, but i suggest removing a bit of the side thickness from the connectors with a sharp knife to be sure the two parts fit well togheter.

Ultra-Slim 60/90/120 cm LED Batten Mount (V-TAC, Ledvion, Hoftronic)

Ultra-Slim LED Batten Mount — V-TAC / Ledvion / Hoftronic compatible Replacement mount for ultra-slim LED batten fixtures with semi-round diffuser. The included OEM clips are flimsy and tend to slip — this print holds the batten tight and…

Indoor Motion Sensor Adapter/ Bewegungsmelder Adapter HOFTRONIC/ Spelsberg

Adapter for indoor motion sensor I designed this adapter for an indoor motion sensor from HOFTRONIC™. It can be mounted directly to the ceiling junction box U86 from Spelsberg. Optional two cable channels with 15mm will cover the wires to…

Rocketry 3.0in Electronics Bay for 2S Battery

Model is a high powered rocket electronics bay sled to hold a 2S 300mAh battery for powering electronics in a 3.0in rocket. Image shows model built using PETG with no supports and 0.2mm layer height. Slots are used to mount battery to…

Safe-O-tronic LSW101 Battery Lids

2 lids. Best to print them “standing up” to maximize strength in the tabs.

Various components for Mechatronics Electropneumatics Testing Boards ELM.03 ELM.06

Various components for Mechatronics Electropneumatics Testing Boards These components were helpful to use with various manufacturers pneumatic components such as actuators, valves or other components with a preparation for ELM.03 ELM.06…

Fysetc F6 electronics cover for Prusa clone

This electronics box is a resize of the original Einsy base and doors models to fit the Fysetc F6. I have an old Prusa MK2.5S clone with a Prusa Bear frame, and works with it like a charm. For the original frame the upper holes have to be…

Electronic antenna broken cover replacing

I bought indoor electronic TV antenna. It was china made product with case from poor material. When the case was broken but antenna still working I decided to try replace it with 3D printed one. It was little bit complicated because all…

Electronically Assisted Astronomy (EAA) phone/viewer mount

Electronically Assisted Astronomy (EAA) is a corner of the amateur astronomy hobby that uses cameras and electronic viewing devices to enhance the viewing experience of dim fuzzy astronomical objects. The Celestron Origin smart telescope…

Customizable parametric stable and waterproof electronics ip65 ip67 project box enclosure case housing

Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…

Easy customizable / parametric electronics project box case enclosure housing by pbtec

Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…

Magnetic Connector for Electronic Projects

Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…

Modular drawer for electronic components (Vase mode)

Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…

Animatronic Eye Mechanism ε3.2

The design can be entirely 3D printed and can use hobby electronics components. However I would recommend using Will Cogley’s animatronic compatible eyes and the dedicated EyeMech controller board available for purchase through…

The RIG (R1.1) — DIY helper stand for testing electronic components

ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…

Atorch DL24 Electronic Load case

(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…

Modular stand for electronic microscope

This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…

Animatronic FNAF Bonnie

Let´s build it! Animatronic FNAF Bonnie Video Part 1 - https://youtu.be/sBMSrNnxWrI Video Part 2 - https://youtu.be/6_IwNrdvX1I Video Part 3 - https://youtu.be/xwtQQssEBv4 List of parts- Check videos description Help me keep creating…

Brain Electronic Circuit - Wall Art (Larger - With CPU)

Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.

Electronics Schematic Stencil (Credit Card Size)

A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists

Snaptronics – Solder-free electric circuit construction kit

Snaptronics gives you a bunch of solder-free 3d-printed bricks to build various basic circuits in a breeze on a magnetic snap-fit basis.

Brain Electronic Circuit remix

Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…

All Original Ball Joint Animatronics

I a ball joint foxy (https://www.thingiverse.com/thing:1112196) but couldn't really find any of the other animatronics using ball joints (besides a "grim" foxy). So, I decide to make them. If you have found models of other animatronics I…

Electronics parametric box V2

Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…

Veronica : 6th Station of the Cross

Veronica : 6th Station of the Cross calvary in Retz, Lower Austria. Made in 1727

Ender 3 all in one, universal rear electronics case

A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…

Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard) Improved

IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…

Ohm's Law Circle Cheat Sheet - Electronics

Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)

External Electronics Box for Ender-3 Pro

This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…

RatRig V-Minion Electronics Enclosure

Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…

Easy parametric box / enclosure for electronic projects

Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…

Boxes for diy electronics projects

The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws

Ass Up Chronicles.

3-Pin Magnetic Connector for Electronic Projects

Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…

Oral-B electronic toothbrush travel case box

I didn't find a travel box for the same kind of toothbrush that I have, so I made one. The brush snaps to the case by the neck and is easy to remove by hitting it to your hand. The top also snaps to the case. I neede these fast so had to…

Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard)

Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…

Electronics parametric box OLD VERSION V2 Available on my profile

OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…

Sabine Wren Cosplay Helmet (w/ electronics and paint lines)

This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…

Animatronic Terminator Eye

Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…

Atorch DL24 Electronic Load module Case

This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…

Chronicles of Drunagor Playerboard

You can print as one piece or in 3 Pieces for smaller printers and glue it

3D Printer Electronics Enclosure

NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…

Stackable drawers for electronics components and small parts

I needed a drawers for my electronics and small parts. I could have bought it but why If I can design and print it by myself? This design was born out of the need of something that I could keep on my desk, practical and easy to access…

FT EMS Voron V0.2 V2 (Electronics Management System)

INTRODUCTION This is version 2 of the design backporting all the learnings from the release of EMS 300/350. The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another printed mount for each of the…

Ender 3 Electronics Box

I have been looking for a electronics box that has the lid on the underside of the printer but I have not found one so I made one myself. I have include the cad files so you can make it your own if you want. Whats in the box? 1 Raspberry…

Electronic project box

Electronic box/enclosure fully customizable Updated V1.01 : Add vents Updated - V1.02 : Add invert option Footbox length update Vents update (logo) Use screw_holes.scad librarie https://www.thingiverse.com/thing:1731893 Updated - V1.03 :…

Motion Follow Eye Animatronics

Motion Follow Eye Animatronics. This Arduino project uses an Optical Flow Sensor (ADNS3080) to capture movement. Then translate the data to move servo's making it look as eyes are following moving object. full project:…

Organizer for electronic components

Attention! Print preparation is only available for STEP format model. STL model is for viewing only. Only when printing from STEP format can you achieve the stated characteristics! An organizer for mobile storage of radio components and…

Electronics opening tools

The thinnest part of the opening pick is 0.3 mm. The spudger is 0.5 mm. Printing: Opening pick: 0.1mm layer height, 100% infill. For the other ones just default settings.

Xenoblade Chronicles 3 flutes

These are mostly faithful recreations of the flutes used by Noah and Mio based on various in-game cutscenes and a couple of references images from Monolith Soft for the actual flutes used to perform the music in the game. They're bigger…

Heart Electronic Circuit - Wall Art (Larger - With CPU)

Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.

Ender 3 Pro Voron Themed Electronics Enclosure

After trying various electronics enclosures for my Ender 3 Pro, I was not happy with many of them due to various issues with each Fit was tight and not very forgiving for running cables Airflow/cable management were usually afterthoughts…

Atorch DL24 Electronic Load Case

Atorch DL24 150W Electronic Load Case For the newer version that can be powered by a 5V USB-C power supply . The top cover can be installed without having to disassemble the heatsink with fan and re-paste the transistor - The top cover…

Device/Electronics desktop organizer

a cool all in 1 desktop device organizer for airpods, iphone and smart watch. This also allows you to charge your devices while in the stand.

Ender 3 V2 Enclosure box electronics external case

Ender 3 V2 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…

Ender-3 V2 Front Electronics Housing

Based on the awesome work of Synyster1911 here: https://www.thingiverse.com/thing:4812842 UPDATED 03/09/2021: The "_v49" have the box lowered 2mm so that the covers are aligned with the extrusions, the rest is identical to the original…

Voron Electronics - Dual UHP din bracket

These brackets can be used to hold two MeanWell UHP psus (usually one 24v and one 48v). Two versions are provided: one for UHP-200 models and one for UHP-350 models. I also included a modified version of the din rail mount which holds a…

Ender 3, Ender 3 Pro Electronics Enclosure (Updated)

This enclosure is designed to hold all the electronics for the printer. It holds the MeanWell power supply, controller board (4.2.7), front control panel, Raspberry PI 4 and a buck converter to power Raspberry PI. Included in the files is…

Kosmos Experimentierkasten: Easy Elektro Start / Easy Electronic: replacement propeller

Images of printed part by me. Printed with eSun PLA+ orange filament. If this one breaks, I’ll print it from PETG for the added flexibility and longevity. I used normal cura supports for this, but I think tree supports also work.

Electronic components box

This 2-tier electronic components storage box is the ideal solution for storing and organizing your electronic components in an efficient and convenient way. It is equipped with two separate compartments for storing your spare parts,…

Ender 3 v2 front electronics UPDATED

Updated design! Made for my specific needs, but you can enjoy it as well. Click here for the previous version. NEW: Place for the BTT 24v UPS Detachable back door for the wireing Exhaust fan 2 on/off switches Holes for cable management…

Customizable Electronics Enclosure

An OpenSCAD electronics enclosure designed to hold one rectangular PCB. The default settings are for the following: -PCB w/ 100mm x 40mm mounting hole spacing -SPAX #8 1 in. pan head screws for cover -M3-0.5 threaded heat set inserts for…

FT EMS V0.2 (Electronic Management System)

V2 (updated design) is available - https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system INTRODUCTION The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another…

Parametric Snap Fit Electronics Enclosure Box

Basic parametric snap fit electronics enclosure / box. Printable without supports. You can size as you like using user parameters in Fusion 360. F3D file supplied. When exporting STL / STEP, it will already be orientated ready for…

Remix of the Eye animatronic (with creepy human face)

We modified a human head (from lehthanis) existing to make it receive eyes animatronics The body is empty to receive the mecanism and spare filement The Eye is our version for the animatronics. We bring some changes as described in the…

Tron Legacy Disc Display with base (and electronics)

This is a full model build of a Tron legacy disc desktop display including circuit python code to light it up. The Base was created to be printed on an MMU and I'll add a tutorial on how to create the whole piece shortly. I printed the…

"Brain Electronic circuit" in 4 pieces

I divided the Brain Electronic circuit wall art into 4 pieces so I could print it BIG in my 3d printer. I joined it and glued the “CPU” part on top of it to hide the joints.

Millennium Universal CNC Electronics Box V1.0

⚡ Introducing the Millennium Machines Universal CNC Electronics Box The Universal CNC Electronics Box is designed to simplify, standardize, and streamline your CNC’s electronics setup—no matter which machine you’re running. Whether you’re…

Skully - Animatronic interactive robotic skull

My kids really enjoyed the VR game ‘Waltz of the Wizard’ by Aldin Software. It features a character called Skully with whom you can interact with and generally be unkindly towards. I had already finished a project by Joran to recreate one…

Toyota / Ford hybrid Electronic Continuously Variable Transmission (E-CVT) model

Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…

Sovol SV08 Electronics Cover

With this mod, there are several opportunities for mounting various fans up to 180x180, its made of 2 separate parts, that fit using M3 bolts/nuts. If you validate this mod, or have any suggestions or improvements, please let me know.…

Stackable electronics mini - rack

rack suitable for network switches up to 8 ports

Albi Magic reading Electronic pencil.

Albi Magic reading Electronic pencil. This is a binder for different sizes of books and old and new pencils.

Oral-B Electronic Toothbrush Stand with integrated charger - REMIX

Remix of the fantastic design by matman_m: https://www.thingiverse.com/thing:3505890 -> created various versions from 2 to 6 brushes -> starting with the 3-brush-version, there are also dual-charge versions Available as .STL and .3MF…

FLSUN V400 LED Triangle - Electronic Bay Cover

I design a Electronic Bay Cover with LED Light Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Its a heavy…