Liczymy pasujące modele…
Hi, Sinar lens board (139x139mm) with ~26,3mm hole, the circle which is “deeper” is 20mm deep and have 100mm diameter. Print in PLA laying on the front with supports inside the ring. 27.05.2025 / Added version with 30mm depth ring.
I have a Cuisinart SM-50 stand mixer and it stopped working properly after a few years. It felt like a “clutch” with the mixing part not spinning while the engine was speeding up. One gear in the main gear train is made of plastic/resin…
I loved @BrookTrouts knife cover, and my wife was trying to get rid of the giant waste of counter space that is known as the "knife holder blob". So, I measured a few times, and came up with these. I recommend you measure your knife, then…
I had the misfortune of getting a stirring tool caught in the mixing mechanism of my Cuisinart Stand Mixer, which then stripped out the plastic Helical gear in the drive system. I'm sure it was made in plastic to do such a thing, but…
This is a container to store Cuisinart food processor blades. It accommodates an arbitrary number of 150mm disc blades, two DLC-10 FP-100TX steel blades, and two disc blade mounts. The Solidworks file is built with equations. Open the…
based on original sinar lensboard
Replacement power button for a Cuisinart griddle. Printed horizontal (power symbol facing the front of the printer) with supports so the two tabs on the side didn't break off when flexing. I do not wish to receive tips from any of the…
This is a modified version of the Cuisinart ICE-21 drive gear posted by Isaac Anderson . I repaired some geometry errors that were being reported by PrusaSlicer, as well as put some holes in it to reduce printing time and material. It was…
Replacement lever handle for the Cuisinart ‘Custom Select’ toaster, and likely others as well. Printed in PETG without supports. Orient with the front of the handle on the build plate.
Update230824 fix typo add some covers hotfix230817 update the lasercut file Add 3Dprinting version for lasercut panal fix some dimensions！！！！ BOM 位置 名称 数量 仙娜母卡口安装螺丝 M4x16盘头 5 铝板与机身之间 M3x50沉头 7 铝板与机身之间 90度倒角刀 1 铝板与机身之间 M3x8x4.2预埋螺母 7…
A remix of calebfwood's 4-blade storage case to safely hold these razor sharp and oddly-shaped cutting tools. Our food processor has only two blades, but we wanted to store the "stem" that holds them alongside the blades themselves, so I…
The knob of my Cuisinart Griddle broke and I designed a replacement. Print it sideways to make the snaping parts stronger. I printed it in PETG. Print instructions Category: 3D Printing Summary The knob of my Cuisinart Griddle broke and I…
Sinar lens board copal 0 Category: Other
Replacement Power Button for Cuisinart GR-5B Electric griddler. If the stem is a big too long cut small ~1mm chunks from it
use a 85*1.5mm for better seal, may not necessary for smooth plate, or just use 704 gule. 8pcs M3*12countersunk screw & nuts 1pcs M3*8 nylon screw for lock if the hole is lose, use M3.5(6# in ANSI) instead of M3 nylon screw. USE SUPPORT…
Sinar lens board copal 3 Category: Other
A remix to better fit all the accessories coming with the Cuisinart DLC-8SBCYP1 Pro Custom 11-Cup food processor. It's also smaller and uses less filament than the original. Printed on a Creality Ender 3 v2 with Hatchbox PLA.
Sinar lens board copal 1 Category: Other
Sinar to linhof ( wista ) adapter. Category: Other
Holder for Cuisinart DFP-14BCWNY 14-Cup Food Processor slicing disc and shredding disk as well as the plastic stem adapter thingy. Print instructions Category: Kitchen & Dining Summary Holder for Cuisinart DFP-14BCWNY 14-Cup Food…
Wall mount holder for the Cuisinart Stick Blender RHB-100XA. Please note that the model differs slightly from the photos - the holder has been extended by 5mm to give the USB charge cable additional space (the cable was rubbing on the…
Use at your own risk. I accept no liability if this is printed and used to bypass safety mechanisms of a Cuisinart DFP-14BCNY 14-Cup Food Processor. Seriously, this is dangerous. Only included here to illustrate the geometry of the safety…
Sinar P2/X Vertical & Horizontal Shift gear
Sinar bellow frame for Norma/P/F/E/A
8x10 back for the Sinar 4x5 P system (and horseman) see enclosed stl's and fusion files. Its smart to look at the cones and adjust so that you avoid vignette (to much extension needed on the Sinar 4x5) and at the same time that it matches…
Sinar P/P2/X Leveler need 7x20 leveler
Here in Washington State we have quite an infestation of stink bugs going this year. My wife, normally quite disinterested in my 3d-printing habits, commissioned this hack after discovering one of the disgusting critters hiding inside of…
sinar 140 lensboard contain two parts sinar DB conversion will not cover 8x10 since DB shutter is too thick for hyergon linhof type is biased, and will be centerd if you use sinar stock linhof conversion board.
ECO810 Sinar P Conversion Kit
Sinar P rear mount takes M4x10x3 square nut and m4x70 screw
Designed for the Cuisinart FP-12. Will hold the slicing and shredding discs and either one of the two chopping blades (keep the second one in the bowl). Okay, no space for the dough blade -- because I've lost mine. Print instructions I've…
Sinar lens board copal 3s Category: Other
My Cuisinart raclette grill knob broke in half, so I designed a replacement! Print with brim and supports on the outside (not the center hole, not necessary). Re-use the metal clip from the original and install with long-nose pliers.…
Standard Front Mount For Sinar P system Need M4 8 3 square Nut and M4 Screw Sharpen the end of the screw before install Category: Camera
This is a remix of the spoon holder by DanLuc: https://www.thingiverse.com/thing:994032 . My Cuisinart DBM-8 Burr Grinder has a measuring spoon that is 18mm wide on the handle/brush end. The spoon would not fit into the original model…
wanted to use the lens that was on my speed graphic on my intrepid 8x10 but also didn't want to take it off of the speed graphic board as I still use it there. So a few searches and some trial and error later we have this. I probably…
Sinar to Linhof lensboard adapter
This food processor doesn't come with any sort of holder or caddy for its slicing/shredding attachments. So I designed a 3D printable option. Each holder requires the following metal parts: 3pcs M4x12mm socket cap head screws 3pcs M4x7mm…
use your sinar lans board on toyo system double mount sinar front enjoy baffle has a step to fit bellows, for lens board can use long version to hold tighter m3*12countersunk screw 12pcs m4*8half-round head screw 10pcs Print Settings…
Tired of refilling your meager 8-oz bean hopper three to four times a week? Yearning for nearly limitless bean storage? Look no further! Extend your Cuisinart Grind and Brew bean hopper to whatever height works for your cabinets. The…
I guess we through the lid in the recycler… So here is the replacement part for a Cuisinart Coffee Grinder
Print using 15% infill PLA standard 0.4mm nozzle settings on Prusa Slicer
Sinar Rail Stop (Norma/P/F Type) takes an M6x20 screw
This is a replacement for the Cuisinart CRC-400 and CRC-800 rice cookers lid handle that is known to break easily. This part gets hot, so make sure you print with a plastic that can handle some heat like PETG, avoid PLA. Print…
Sinar P Stand Tilt Gear Category: Camera
This is a custom holder for these Cuisinart 12 cup accessories: FP-12RSD reversible shredding disk (180 mm diameter, 10 mm depth) FP-12ASD adjustable slicing disk (180 mm diameter, 22 mm depth) FP-12STM stem adaptor (2) (18 mm diameter,…
I designed this end guard to protect non-stick pots from the metal end of a Cuisinart Immersion Blender (Model#: csb-76bc). As this guard may fit other immersion/stick blenders, the relevant dimensions are: Outside diameter of blender…
The opening of the coffee bean hopper on the Cuisinart Grind & Brew is very small making it difficult to fill. This simple funnel fits in the top of the hopper and provided a much wider opening to avoid “spilling the beans”.
Sinar to Graflex Pacemaker 4x5 lensboard Adapter
Sinar Universal Frame Rail Press Block
Replacement knob for Cuisinart griddle/grill. Use the existing metal strip from the old knob and press it into place on this. I printed in ABS because that was the only black material I had. Should work well in PETG but stay away from PLA…
Join my friendly 3D Printing Facebook Group . Life is full of joys, such as bread makers and children. Sometimes, worlds collide, such as bread makers and children. Unbeknownst to me, my bread maker was missing one of its rubber feet,…
Sinar F Clamp Holder Ring and Grip Category: Camera
Also available on my website .
This model holds the 2 included Cuisinart blades vertical, or with double stick tape or 3m Command strips, on the inside of a cabinet door. These blades are a pain to keep in the drawer or cabinet due to sharp edges and taking up too much…
Sinar F/F1/F2 leveler require 7x20 leveler, m2x5 screw, m2 shim
See video for details
This is a variant of the food processor blade holder published by futur3gentleman. The blades used with the 14 cup model of the Cuisinart food processor were larger than would fit in the original design, so I recreated it to accommodate…
The paddle on my mixer was too far from the bowl, and the adjustment screw was already maxed out. This spacer increases the bowl height by 3mm.
Sinar Universal Protector for both screen and lensboard
The gf said the Cuisinart ICE-30BCP1 Ice Cream Maker 2-Qt would accumulate dust and dog hair inside when left unused in storage for awhile as there is an open hole (by design) on the top. This simple lid fits over it to prevent anything…
This is a replacement safety lever for the bowl lid of a 14 Cup Cuisinart model DFP-14BCNY. The one on our 3 year old food processor was cracked and about to fall to pieces, so I designed a new one. For a $320 appliance, this part is…
A holder for the Cokin P filter system to put them on a Sinar view cam. Just add a M3 hex nut and screw to fix it at the desired position. For the knob I used this model:…
Cuisinart Pressure Cooker Condensation Collector Model EPC-1200PC Found one of these at a yard sale and it was missing the condensation collector. Yeah, you can buy one from Cuisinart I suppose but it didn't look right, so I whipped up…
Every time we put our Cuisinart Ice Cream churn away we cover the top with a piece of plastic wrap. Once we finished our last batch of strawberry ice cream I decided to remedy the missing part by designing and printing a cap for the…
Replacement Kettle knob that broke off along with a screw to install it.
Made a small frame to attach it to front or rear standard of my Sinar view cam. It goes in the slots on top and on each side of the standards. You can glue some velcro tape on it to fix a dark cloth or use it to mount other things.
Sinar Norma & P 8x10 bellow frame
Graflex Pacemaker Speed Graphic to Sinar mount shutter conversion
Here a knob replacement for a Cuisinart raclette grill as the original knob easily brake. Print upside down (pin hole on top). No brim required.
Just a little cleaning tool for Cuisinart burr grinders:…
Was designed for TPU, 20-30% infill, 3 walls, .2mm layer height. PLA or other materials won't work.
Wife broke can opener crank. In a bid to fend off starvation and marital strife, I made a quick replacement. Print Settings Printer Brand: RepRap Printer: Makerfarm i3v 8 Rafts: No Supports: No Notes: Printed in PETG. I really need to…
This fits Chamonix 8"x8" lens board cameras and adapts them down to Sinar sized lens boards. You'll want to print one copy of sinar.stl and four copies of toggle.stl . You'll also need 8xM3x4x5mm heat set inserts. Install the eight…
This storage box is for the Cuisinart 14-cup steel chopping blade (Model: DLC-001TXB, Example: https://amzn.to/3SVcnze) which fits onto their 14-Cup processor models: DFP-14BWN, DFP-14BCWNY, MP-14N, MP-14, DFP-14BCWN, DLC-2014N,…
There were similar models online but were much bigger and couldn't really reuse the existing rubber seals so I made this. Printed in PA6-GF25 because I wanted something with a lot of temp resistance. 4 perimeters Supports underneath…
The stock housing for this webcam is huge for no reason and I wanted to mount it to my 3D printer. I whipped up this quick model to make it more compact and mountable to a printer extrusion. To disassemble the camera: Peel off the front…
Made for use with the Cuisinart Single Serve Grind and Brew Coffee machine, this will hold the HomeBarista Reusable Filter Cup in between uses. It may hold the insert, i haven't tested to see. Made out of PET-G. There is a magnet on the…
This is a replacement cap for a Cuisinart food processor cover. The diameter of the hole in the cover is 46mm. Category: Kitchen & Dining
Fits into the drip tray holder, place the stock metal grate on top. Print with 0% infill, 3 or 4 walls, 0 top layers. Cuisinart Coffee Maker, Single Serve 72-Ounce Reservoir Coffee Machine, Programmable Brewing & Hot Water Dispenser,…
The rubber feet fell off of our Cuisinart CPK-17 kettle, which made it very wobbly. I messured and sketched this out in OnShape, then printed in TPU. This fixed the problem.
I needed a extension to position my favorite coffee cup in the single cup brewer to prevent excessive splashing.
After my eggs are cooked I like to keep them on the tray but there's no place to put it while its holding eggs except the cooker. This is like a multi-egg egg cup. I printed in ASA to be more heat resistant when washing, no support…
The handle of my rice cooker broke after many wash cycle in the dishwasher. I was able to salvage the metal parts and screws and made a new plastic part. Cuisinart CRC-400C
Pretty basic. Let me know if you have any questions. It probably could have used more bevel on the edges, but it worked so I will leave it at that.
Removable blender lid insert for Cuisinart CBT-2000C (Hurricane). Allows addition of ingredients during the blending process. This may work for other blenders, but I created it specifically for the above model. Printed in PETG, Bambu…
The Cuisinart HP-400PC immersion blender comes with a bunch of accessories. One of the included accessories is a mini food processor with both a blade and a shedding/slicing disc. Only one of these can be stored inside of the food…
The only tricky part with this print is the hinge pin. It might require some sanding down to slide into the the hinges.
This model is a rubber foot for the Cuisinart Snow Cone Maker. To attach, place the print where the rubber foot should be. Then, super glue it.
I printed this on a BIQU B1 using eSUN PLA+ filament.
A remix of @Colin_40440 's and calebfwood's 4-blade storage case with a dedicated dough blade and stem storage component, and a (new) dovetail connection to assemble with the original model. I've included the same dovetail geometry…
This is a 3D-printed adapter for the Cuisinart DGB-550BKP1 Automatic Coffeemaker Grind & Brew ( Amazon link ). It replaces the entire bean grinding mechanism when you want to use the “Grind Off” feature for pre-ground coffee. The adapter…
This is an insert for the Supreme Grind mill. It allows for the direct fill of the Moka Pot filter cone. I used fusion 360 to model this. For my purposes I designed based on a 62.05mm diameter filter, (maximum) for the grinder receptacle.…
Knife Block for Cuisinart Knife Set #17550F. Holds 8in Chef, 8in Slicing, 8in Bread, 6in Santoku, 6in Serrated, and 3.5in Paring knives.
This print in place replacement lid is more durable because of the single piece design with reinforcement in a few places. The function of the button is slightly modified. I recommend printing with ABS and using a fume bath to smooth the…
![Cuisinart 14-cup Food Processor Organizer [Modular Version]](https://media.printables.com/media/prints/31995847-c2f6-44e1-9256-6ccaab25d990/images/9631405_c3759c49-5c4a-4bdb-bf4d-4ef5aebf82b8_69bc5538-f978-41f5-b6ac-2a007951eeda/20250429_120155.jpg)
