Wyniki wyszukiwania: splice

Sortowanie

118 modeli

P
Printablesakamaka

1.75mm Filament-Splicer-Guide Print-in-Place

Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…

Pobrania
2192
Polubienia
222
Ocena
4,27
P
Printablesdteng

Filament Cutter for Splicer

I recently purchased a Sunlu FC01 Filament Connector to splice filament remnants onto new filament spools. This model was created to trim the filament ends with uniform, matching 45 degree cuts. A single edge razor blade is used for the…

Pobrania
1589
Polubienia
520
Ocena
5
P
PrintablesTurnt

Filament Splicer & Joiner with Roll Holder

Hi, This is my filament splicer/joiner that I designed for the purpose of consuming entire rolls of filament and also enabling multi-color prints. I also made a spool holder to clamp to my desk. Splicer will fit desks up to 30mm and the…

Pobrania
1137
Polubienia
208
Ocena
4,63
P
PrintablesMushyUniverse

Wire Splice Mold - Slightly Modified

This is a remix of Wire Splice Mold by t2pain2 on Thingiverse https://www.thingiverse.com/thing:6316585 Changes from the original: - Split into two models for easier slicer arrangement. - Re-scaled to properly fit 14AWG wire without…

Pobrania
807
Polubienia
57
Ocena
0
P
PrintablesDM4DS

1.75mm Filament Fuser / Splicer

Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…

Pobrania
764
Polubienia
128
Ocena
4
P
Printableslipos

Fiber optic splice tray v2.0

Cartella organizzatrice per giunzioni in fibra ottica impilabile. Stackable splice tray folder for fiber optic splices.

Pobrania
573
Polubienia
34
Ocena
0
P
PrintablesLemanito

Stand for Vit Sport filament connector (splicer)

I was inspired by https://www.thingiverse.com/thing:5233832 . However I decided to draw my own model because: I have different magnets I like rounded shapes I want to have possibility to press it only from the top I want more precision…

Pobrania
530
Polubienia
73
Ocena
5
P
PrintablesNoWarrenty

Easy filament welder / splicer

The jig us actially optional; the magic is the silicon tube! You can do it without that jig, but it will help holding the filament while welding. After printing the jig, you may need to use a cutting knife to make the cutouts fitting for…

Pobrania
388
Polubienia
50
Ocena
4,75
P
Printablesmusiu3d

Simple Filament Splice Helper

Just heat the two ends of the filament with a solder iron and push. Then trim the excess plastic. The hinge uses about 40mm of filament to be inserted. Print two of the model, it should fit perfectly with itself. Clamp with a paper binder…

Pobrania
380
Polubienia
44
Ocena
4,6
P
PrintablesAdam Segal

GT2 Splicer for Timing belts

I was searching for a good way to splice belts, and there are a number of methods I found, but of them all, this seemed to be the best, and it's incredibly strong, I tried to pull it apart and I couldn't. I found an old forum post, I…

Pobrania
375
Polubienia
50
Ocena
5
P
PrintablesMakingBoost

1.75mm Filament Cut & Splice Jig

Here is an update on a previously posted filament splicing jig. I added cutting guide, improved the overall strength, and added m3 knobs. All the needed hardware to complete is: 4 x M3 Nuts and 2 x M3 16mm Hex Socket Bolts The standard…

Pobrania
368
Polubienia
44
Ocena
4,6
P
PrintablesMaker Bit

Wago Connector Box – Parametric 3D Printed Housing for Wago 221 Splice Connectors

Keep your wiring neat and secure with this 3D printed Wago connector box . Designed for the popular Wago 221 splicing connectors , this housing keeps your connectors firmly in place and makes your setup more organized. 🔧 Features: Fits…

Pobrania
350
Polubienia
87
Ocena
5
P
Printableskapik1

Fiber optic cable termination / splice/ repair box

Fiber optic cable termination / splice/ repair box for small drop or blow cables. Termination and repair after damage.

Pobrania
333
Polubienia
52
Ocena
5
P
PrintablesTravis G.

1.75mm Filament splicer tool

It never fails. I always seem to have a partial spool of filament that isn't enough to do a project with. This is my attempt at using all my partial reels of filament. You simply clamp the two pieces together and slide a piece of filament…

Pobrania
308
Polubienia
21
Ocena
5
P
Printablesfaultedlogic

Easy Splice Adapter for Sunlu Filament Connector

I have many nearly empty spools of filament that are needlessly taking up space. If I'm starting a new project, I like to start with enough filament to complete it. I've manually spliced filament in the past using a lighter, then sand the…

Pobrania
277
Polubienia
33
Ocena
4,67
P
PrintablesThomas Husum

Filament Splicer

0.2 mm layer height 15% infill 10 pcs. Neodyme Magnets 5*1 mm I used a storm lighter for the splicing.

Pobrania
275
Polubienia
122
Ocena
0
P
PrintablesBotcan3D

AUTO FILAMENT SPLICER (AFS V1) USING YOUR 3D BOWDEN PRINTER (e.g. Ender 3/PRO)

AUTO FILAMENT SPLICER (AFS V1) USING YOUR 3D BOWDEN PRINTER (e.g. Ender 3/PRO) (see also optional AFS V2 below, as late addition) I have searched for various filament splicer projects and watched numerous videos, but I couldn't find any…

Pobrania
240
Polubienia
75
Ocena
0
P
Printablesgreat_timing

1/4" Hose Barb Fitting - "Splicer" / "Coupler"

Not recommended for high pressure or fuel applications. Hose in photos is a 1/4" I.D. x 3/8" O.D. Clear Vinyl Tubing. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped…

Pobrania
204
Polubienia
25
Ocena
0
P
PrintablesPiercet

Potting jacket for an 8mm to 10mm or 8 mm to 8mm inline cable splice

This is a set of Cable splice jackets designed to be used with scotchcast cable jacketing resin for making inline tether splices for underwater vehicles or other electrical cable repairs. It's designed to fit the 8mm yellow blue robotics…

Pobrania
202
Polubienia
8
Ocena
0
P
Printablesnet_dog13

Fiber Optic Splice Box (6x LC Duplex)

I designed this splice box in my free time to help the company I work for to acess fiber optic cables in our building. I designed this custom box, because it had to be placed in a fuse box. Of course you can use it anywhere else. It is a…

Pobrania
197
Polubienia
27
Ocena
0
P
PrintablesG

Filament Connector Stand (Filament Splicer Stand)

I was inspired by Lemanito's Vit Sport Filament Connector. But I bought the connector from AliExpress and had other magnets in stock Parts required : Filament Connector: https://de.aliexpress.com/item/1005005743810577.html 2 Screws M4x60:…

Pobrania
196
Polubienia
37
Ocena
4
P
PrintablesBeefdip

Strain Relief wire splice

Print it in the orientation it was downloaded in. No supports. Solder your wires together and isolate them by taping each down with kapton tape. Fill with epoxy or hot glue or something when done. This is for 3mm aux cords and 4mm aux…

Pobrania
187
Polubienia
139
Ocena
5
P
Printablesakinadom

Line Splice Sewing Machine Presser Feet

These are presser feet designed to fit many sewing machines for splicing pieces of line to create eyelets, especially useful for example in paragliding or kiting. I've designed around low and high shank machines that I own, namely Pfaff…

Pobrania
186
Polubienia
49
Ocena
4,75
P
Printables3D-Kalle

Filament-Splicer

Hier mal eine Variante zum Verbinden der Filament Reste von pick013, Vielen Dank!

Pobrania
185
Polubienia
36
Ocena
0
P
PrintablesNalrod

2.85mm Filament-Splicer-Guide Print-in-Place

Print-in-Place 2.85mm Filament-Splicer-Guide based on akamaka's design. I adapted the original part with larger diameter slot to accommodate 2.85mm filament. The part printed well and the hinge worked perfectly once you break it loose. I…

Pobrania
183
Polubienia
13
Ocena
4
P
PrintablesPax 3D

Slidey Filament Splicer

Do you have numerous filament ends that just take up space? Do you want to join 2 spools together? Well now you can! Introducing the Slidey Filament Splicer This is a simple filament splicer i created in Fusion 360. The design includes 2…

Pobrania
181
Polubienia
32
Ocena
0
P
Printableslipos

Fiber optic splice tray

Splice tray to organize fiber optic junction

Pobrania
162
Polubienia
17
Ocena
5
P
PrintablesJolly Naughty

Wire Splice Mold With Hot Glue

Wire Splice Mold For Use With Hot Glue. Print In High heat Filament At 100% Infill. Hold Closed With Bull Clips.

Pobrania
160
Polubienia
29
Ocena
0
P
PrintablesAndersounds

1/4" Audio Tape Splicer

Printed with PLA at 0.20 no problems. Print it right side up, as printing on face results in a bad finish in the tape groove.

Pobrania
160
Polubienia
9
Ocena
0
P
Printablesjinetix

Voron 2.4 Bed Wago Mount for LDO PCB Splicer (3 and 4 Wago)

Update (3/3/25): Added a 3 wago version due to a request. For those that have heaters with the fuse already integrated and only need 3 wagos for L/N/E. Was looking for a bed wago mod to make removing the bed easier during maintenance and…

Pobrania
150
Polubienia
25
Ocena
0
P
Printablesm00dawg

Cassette Tape Splice Block

A simple splice block based off ¼" tape splicing blocks but for the width of cassette tape. I use it with a thin razor (it actually is the blade from a PTFE tube cutter) but I think an Xacto knife will work as well. Just like with a ¼"…

Pobrania
147
Polubienia
14
Ocena
5
P
PrintablesMrPerry

Filament Splicer

mold melted filament into the desired shape and size. use supports everywhere to obtain best outcome.

Pobrania
142
Polubienia
26
Ocena
0
P
PrintablesBob B

Filament Splicer Clamp

This is an add on for LoboCNC's filament splicer. I liked his design so much I designed a clamp to force his splicer together to free up your hands while using it. I printed this using PLA but you can use any filament you have on hand. My…

Pobrania
138
Polubienia
14
Ocena
0
P
PrintablesPhil

Filament Splicer

I printed this on Anycubic Kobra 2 Neo. 15% infill with 0.04 nozzle. I used PLA which seems to work fine but PETG would work as well. I used a length of PTE tube approx. 3" long. Insert the 2 filament pieces into the tube so they meet in…

Pobrania
137
Polubienia
15
Ocena
5
P
PrintablesMakerDane

Fixed Cooling Tray for Fujikura 70S Fusion Splicer

An allways mounted cooling tray for Fujikura 70S fusion splicer. Splicer do fit in transport box with the tray mounted.

Pobrania
133
Polubienia
8
Ocena
5
P
PrintablesDelita

Filament Splicer

This is a filament splicing jig, I recommend printing it in PETG or more heat resistant plastic. I changed the original model to use heat set inserts (M3x5x4) and to also use PTFE tubing that has an Outer Diameter (OD) of 2.6mm. Here is…

Pobrania
131
Polubienia
31
Ocena
5
P
PrintablesDBrock

Bioshock Cat Splicer Mask with LED Eyes

I printed the right and left halves of the mask as provided, with no supports but one side has to be flipped 180 in the slicer app. I couldn't do anything with the original whiskers that stand on-end so I made some to print horizontally.…

Pobrania
130
Polubienia
50
Ocena
4
P
Printablesjurassic73

Soaker Hose - splice and end cap

This is a splice to repair a soaker hose. The inner diameter of my soaker hose was roughly 15 mm. This pushed in to place and did not leak. Time will tell. Also created an end cap. Printed in PETG with three perimeters on the higher end…

Pobrania
128
Polubienia
16
Ocena
0
P
PrintablesEvan000

CR-30 3DPrintMill Short Splice Extension

I find that the regular Creality Splice Kit for the CR-30 3DPrintMill a bit long for everyday use in my space limited apartment. This 3D printed version gives you an extra 180 mm for parts to roll out. The vertical height of the roller…

Pobrania
125
Polubienia
24
Ocena
4
P
Printablesgreat_timing

3/8" Hose Barb Fitting - "Splicer" / "Coupler"

Not recommended for high pressure or fuel applications. Intended for hose/tubing with 3/8" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…

Pobrania
123
Polubienia
11
Ocena
0
P
Printablesgreat_timing

1/2" Hose Barb Fitting - "Splicer" / "Coupler"

Not recommended for high pressure or fuel applications. Intended for hose/tubing with 1/2" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…

Pobrania
119
Polubienia
56
Ocena
5
P
PrintablesBarsMonster

Optical fiber splice holder/protector

Protects spliced optical fiber as it exits standard metal splice protector. Fix the fiber using tape on both ends. There are versions with total length of 80mm-120mm (8mm for tape on each side). 4x4mm space for the splice. Feel free to…

Pobrania
116
Polubienia
16
Ocena
0
P
PrintablesSpinodal_Zeugma

Too Many Bones: Baddie Chip Dividers for Undertow, Unbreakable, and Splice and Dice

These are divider tokens to separate the new categories of Baddie chips (Break, Krelln, Mech) found in the expansions Undertow and Unbreakable for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each…

Pobrania
115
Polubienia
14
Ocena
0
P
Printablesgreat_timing

5/16" Hose Barb Fitting - "Splicer" / "Coupler"

Not recommended for high pressure or fuel applications. Intended for hose/tubing with 5/16" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with…

Pobrania
106
Polubienia
56
Ocena
0

Wago 221 Inline 3-Way Splice Box (Remix)

I was very impressed with the original model, but the hole in the 3-way was too small for my application, 14/2 Romex, so I remixed it to fit. In the cover photo, the original is on the left and my remix is on the right. (I started with…

Pobrania
105
Polubienia
22
Ocena
0
P
PrintablesAndre Dethioux

SUNLU Filament Splicer helping hand

Clampable and boltable filament holder to help splice filament with Sunlu splicer

Pobrania
102
Polubienia
8
Ocena
0

Dust Splice Coupler Adapter - from 4" Flex Hose to 4" Flex Hose

Dust Splice Coupler Adapter - from 4" Flex Hose to 4" Flex Hose (based on POWERTEC 70123 O.D. Splice, 4", Black *). Print as oriented. Prints without supports. Usually prints faster and stronger if you up the number of perimeter walls so…

Pobrania
101
Polubienia
18
Ocena
0
P
PrintablesI.AM.ME3D

Batman Beyond Spliced

This is a model of Batman beyond from the old cartoon show in the old cartoon. There was an episode where he was caught and tied up where he actually was injected with the splice chemical which caused him to be spliced with as a bat, and…

Pobrania
95
Polubienia
23
Ocena
0
P
PrintablesAkvit

Improved fiber optic splice tray

This is a model based on the fiber optic splice tray by @lipos. Compared to the original, I have added holes for zip ties to secure the cables. I have also strengthened the lid, because original was quite flimsy.

Pobrania
93
Polubienia
5
Ocena
0
P
Printablesbapski

Stand for Vit Sport filament connector (splicer)

i made this stand compatible with 8 x 3 magnets

Pobrania
92
Polubienia
7
Ocena
0
P
PrintablesJake Ethier

Simple Filament Splice Guide

Just a simple guide for splicing filaments. Needed to splice an end of a spool to a new spool, so I threw this together real quick. Its a simple device so beauty isn't a requirement, so any quality speed and no support. 10-25 infill…

Pobrania
91
Polubienia
4
Ocena
5
P
Printablesgreat_timing

5/8" Hose Barb Fitting - "Splicer" / "Coupler" - (Standard Garden Hose)

Not recommended for high pressure or fuel applications. Intended for hose/tubing with 5/8" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…

Pobrania
84
Polubienia
9
Ocena
0
P
PrintablesMana Dream

USB / 6-Wire Splicer with strain relief

A print for splicing two cables together with up to 6 wires. My use case is splicing two USB cables together without using tape or anything to protect the wires from each other. Can be used for cables with up to 6 wires. Includes a long…

Pobrania
77
Polubienia
20
Ocena
4

Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose (based on POWERTEC 70123 O.D. Splice, 4", Black)

Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose. As mentioned, this is styled after POWERTEC 70123 O.D. Splice, 4", Black, available here* , yet tweaked/shortened to make it print more quickly than a 1-to-1 mimic would print.…

Pobrania
71
Polubienia
22
Ocena
5
P
PrintablesChettiTheYeti

Gridfinity filament splicer holder

Not perfect but serves its purpose well.

Pobrania
71
Polubienia
18
Ocena
5
P
PrintablesMister American

Filament Splicer Retainer

Filament splicer retainer for holding the 2 halves in place while splicing. The splicer comes with two retaining bolts and a clamp which I found cumbersome to user. Set those bolts and camp aside and simple lift out the joiner from this…

Pobrania
69
Polubienia
15
Ocena
0
P
PrintablesKolvert

Filament Splicer

A Filament Splicer you can use to splice together remainings. It's design to work with capricorn tubing inserts on the wider channels, one on each side of the cut out. In order to keep both halves together, either gluethem or solder them…

Pobrania
69
Polubienia
9
Ocena
0
P
Printableslucan07

Simple filament splicer

Easy splicer for 1.75 mm filaments Metal or ceramic base for heat sink 2 x Heat Sink Radiator Cooling for Electronic Chip IC With Thermal Conductive Tape available Aliexpress, Amazon or Ebay etc for around £2 for 10 size 20 x 20 x 6mm…

Pobrania
65
Polubienia
14
Ocena
0
P
PrintablesDELLOO2008

Wire Splice Vise - holds two wires in line for soldering (100% printed)

Drop each wire into a vise from the top and turn the knob. Slide the vises together until the stripped ends overlap, lock them with the knob on top, and solder. Both vises sit on the same rail at the same height, so the wires always line…

Pobrania
64
Polubienia
33
Ocena
0
P
PrintablesTyler Cramer

Splice Jig

Just a small jig for splicing filament. Remix of original. Added small hole in bottom to mount if needed and beveled holes for guiding filament in. Hole diameter is 1.78mm Recommend scale up to 115%-118% for smoother filament motion

Pobrania
61
Polubienia
6
Ocena
0
P
PrintablesMinihaugern

LDO 2x2/3x2 JST-XH Splicer/splitter PCB mount

LDO 2x2/3x3 JST XH Splicer PCB mount for 2020 extrusion

Pobrania
60
Polubienia
5
Ocena
0
P
Printablesharbormaster

Splice Clamp for Model Making

This End Splice Clamp is an excellent solution for end-to-end gluing and assembly of parts. An opening in the clamp allows you to glue to parts together while they're clamped in place, guaranteeing they won't move before the glue sets.…

Pobrania
59
Polubienia
11
Ocena
0
P
Printablesgwa

Cable Splices for BlueROV

To post process I put a piece of 400 grit sand paper on a sheet of glass and wet sand the mating faces until flat. Apply mold release. You can use vaseline thinned with a bit of mineral turpentine (mineral spirits) in a pinch.

Pobrania
59
Polubienia
4
Ocena
0
P
Printablestruglodite

Dri-Splice Style Waterproof Connectors

I designed these things to keep underground low voltage wire splices dry and clean. There are many different products available to do this job, but most of them are either messy, difficult to use, or unreliable. I modeled the general…

Pobrania
55
Polubienia
9
Ocena
0
P
Printableskaje

Garden Hose Coupler/Union/Splicer - Hose Repair

I don't know how this will hold up over the long term, but I thought it was worth trying. As I write this, it is March 26, 2026; I hope to provide an update in a year or so as to how this worked out (or sooner if it breaks!). I have a…

Pobrania
50
Polubienia
5
Ocena
0
P
PrintablesMakerIggs

40mm Vacuum hose splicer

I had to cut some of my vacuum hose back and that left two unusable hoses. So I did what anyone in my position would do and that's design up a solution. It's a tight fit, but hey, that's what you want. The OD of this splitter w/out the…

Pobrania
45
Polubienia
8
Ocena
0
P
PrintablesJawzX2

Solderless 10mm 4-wire flat LED strip wire clip/splice

After struggling with the tiny, thin solder pads tearing off my cheap 10mmx4wire RGB LED strips when making custom splices and installs in furniture I designed this solderless clip. Sure, there are commercial solutions for this problem,…

Pobrania
44
Polubienia
9
Ocena
0
P
Printablesrazor10

Chess Board - Snaps Together with Splice Plate

Chess board with raised letter/numbers around the perimeter. The board is printed in 4 quadrants with a splice plate that overlaps the inner four corners. The perimeter also has rectangular channel for the connectors to snap into, 4 are…

Pobrania
44
Polubienia
8
Ocena
5
P
Printableschamber32

Mounted Filament Splicer

Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .2 Infill: 20% Filament brand: Sunlu Filament color: Green Filament material: PLA

Pobrania
42
Polubienia
5
Ocena
4,5
P
PrintablesJack J

filament splicer

a filament splicer

Pobrania
40
Polubienia
3
Ocena
0

Splicer (Rope splice tool)

This is a handle that can be use with 1mm wire and make a loop as long as you need. i used stainless steel welding wire. It als needs a countersunk M8x20 screw to lock the wire underneath the screw head. Don't forget to post a make and…

Pobrania
37
Polubienia
4
Ocena
0
P
PrintablesBilliam

Flat audio wire splice strain relief

Strain relief in order to splice a flat audio cable to two 22awg wires (third wire in cable was not used).

Pobrania
37
Polubienia
15
Ocena
0
P
PrintablesTurbo

Adjustable Splice tray for optical fiber

Splice tray with adjustable loop length. For optical fiber joints.

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesGerryPB

Double Banana Splice Joiner

Coupler for two pairs of banana jacks. It will fit a standard 4.2mm banana plug and has standard 0.75” on center spacing. A360 viewer link.. http://a360.co/2I8qf2G Print instructions Category: Electronics Post-Printing Cut two 5mm brass…

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesMark Berk

Rope splicer

For use with a 1.6mm stainless steel welding wire. to splice rope. i also use two M4 nuts and two M4 set screws to fasten the welding wire.

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesJarhead

JST XH Splicer 2020 Mount

2020 extrusion mount for LDO XH Splicer.

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesV4projects

DIY filament splicer

Filament splicer using an old E3D V6 hot end and Klipper configuration. Please not that you have to fabricate a part in in aluminium or steel in addition to print the remaining parts in high temp ABS/ASA. Sample Klipper config:…

Pobrania
31
Polubienia
11
Ocena
5

Magnetic Filament Splicer

Magnetic Filament Splice Tool This is my attempt to design and make a filament splicer that is reusable and magnetic. I have a lot of filament spools that are too short to use, so I decided to design a filament splicer that has magnets…

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesMarcin Kuberski

SMT Splice Tape Storage Box 8mm

Container / feeder for double SMT tape 8mm. Holder tailored to Recco's workplace. Update: New models 1. Mounted with screws (4mm) 2. Mounted with 30mm Nano tape 3. Clear back (can be mounted with thin double-sided tape)

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesSV SYA

D splicer holder

D splicer holder D splicers are a great tool to have on the boat. They make working with Dyneema so much easier and once you the options you have with dyneema you will start using it more and more. Downside of a D splicer? The price, its…

Pobrania
27
Polubienia
4
Ocena
0
P
PrintablesLoboCNC

Vase-Mode Color Tower with Spliced Filament

Rather than spending a bunch of time swapping filament to print out color swatches, I decided to use my Filament Splicing Jig to piece together all of my colors beforehand and then print the tower in one fell swoop. And to make it print…

Pobrania
27
Polubienia
5
Ocena
3
P
PrintablesDee

Splice Jig

This is just a little jig to help splicing microphone cable (or other cable). The diameter is 0.3 inch, and length is 1 inch. There are 3 channels along the length to allow the spliced wires to maintain their separation. To use this, cut…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesGraham_Turner

Fiber Drop Splice Kit Jig

A jig to hold your fiber drop gel splice kit in place while you're doing your work. Best to print in a bright colour if you're using one of those see-through plastic kits, the contrast will help you see what you're doing. There's a hole…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesMeltinPlastic

Cable Splice Egg--Parametric

This model prints in two halves to allow cables that have been spliced to be inserted and protected by the shell. Then the two halves can be screwed together with 4 M3x8 metric screws and hex nuts. The photo is of my prototype that is not…

Pobrania
23
Polubienia
7
Ocena
0
P
PrintablesZeLuxe
Pobrania
22
Polubienia
12
Ocena
3
P
PrintablesPepe

Fiber splice box for DIN rail

An optical termination box for up to 12 fiber splices. You can choose 6 or 12 port variant, and up to two splice trays. Face plate fits standard optical connector (tested for E2000/APC and SC pigtails with 2m leads). Tested with cable…

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesDaniel Onescu

18650 battery case spliced/expanded

18650 battery case DIY can be spliced expanded I used battery contacts set https://www.sigmanortec.ro/set-contacte-baterie-aa-plata-plus-arc

Pobrania
18
Polubienia
3
Ocena
0
P
Printables-Matt-

Fiber optic cable termination / splice/ repair box REMIX socket head screws.

Additional clearance to allow the box to close properly with M3 socket head screws.

Pobrania
18
Polubienia
0
Ocena
0
P
Printablesaxellarcos

Drip Irrigation Splice Cover

I designed a snap in cover that protect a drip irrigation straight splices. These work with RainBird brown 1/2 drip tubing straight splices. The purpose for creating these was that I keep breaking these with a string trimmer when there…

Pobrania
18
Polubienia
4
Ocena
0
P
Printablespastrami4033

Gradual curtain rod splice

This is designed for use with two-piece curtain rods, where one side fits into the other and has a plastic bit to prevent the parts from sliding. This is a replacement for the original version and is helpful when automating curtain…

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesKyle Falconer

Tape splicer with decorations

Modifications were done using Prusaslicer. The cassette tape SVG was created by Abdulloh Fauzan from Noun Project (CC BY 3.0) The font is Inter . under SIL OPEN FONT LICENSE Version 1.1 .

Pobrania
17
Polubienia
0
Ocena
0

Cover for spliced cable

Cover for spliced cables, used it to fit two audio cables together. Can be scaled for the desired cable size. I recommend to fill it with epoxy or hot glue to after soldering.

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesFoundem

Splice sleeve cooling tray 70

Need a handy way to hold your splice sleeves? This will mount onto your Fujikura 70 model splice machines. Push the boxes on the the rear pillars of the machines. Holds 12 splices EASY. I designed it to mount a commscope chip for extra…

Pobrania
16
Polubienia
1
Ocena
0
P
Printablesfreedj

6mm XL timing belt splice jig

A splice jig to help make consistent cuts in open 6mm XL belt. You will need this jig, a knife, a 15mm wide ruler, and super glue to make a belt splice. Use the 15 - 17 mm wide ruler against the stops to guide your cut.

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesMarin Cailliau

Splicer Handle

Une poignée pour réaliser une aiguille à long châs, utile pour faire des épissures sur de la tresse creuse type Dyneema. Vous aurez besoin de fil inox diamètre 1,5mm environ, j'utilise personnellement le toron central de câble inox 1 x 19…

Pobrania
15
Polubienia
0
Ocena
0

L925BP fiber optic mechanical splice-operation Case

Коробка для оптического механического соединителя

Pobrania
13
Polubienia
6
Ocena
0
P
PrintablesBryanA

Palette 3 splice core fan bracket

The fan is normally held in place by two small screws through the mounting points on the corners of the fan housing, but if those mounting points break the fan will come loose and no longer direct airflow across the splice core properly.…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesDaniel Boiger

Too Many Bones Lid for Splice&Dice Organizer

This is a lid/box for the Splice & Dice Build a Tyrant organizer from “ Too Many Bones Trove Chest Organizers von js500 ". My file only contains the lid, designed by me. To print the organizer itself use the link given above. MY PRINT…

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesMHag

Filament Splicer Holder for Multiboard

A minimal shelf for holding a Sunlu filament splice on a multiboard panel.

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesSteveC

Ford Tractor Voltage Regulator Splice Point (Ford 800, 860)

After converting the Ford 860 to an internally regulated alternator I removed the external voltage regulator and decided to make an easy splice point for wiring the tractor. The 6 Center Studs are number 10's I used a hex head #10/32 that…

Pobrania
10
Polubienia
0
Ocena
0