19 990 modeli
Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394
Wydruk około 2,30 €–2,82 € nettoWstępna wycena jednego wariantu
Nice improvement on my previous low poly cat model. Made in Blender. Commercial Use: https://cults3d.com/:1308071 $1 Donation: https://cults3d.com/:1308029
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Hanging / Sitting Skull Planter - No Supports needed for this model! Designed in Nomad Sculpt you can print and put your favorite plant in there! Two file options - with/without drain hole No Supports are required - similar to printing a…
Wydruk około 9,14 €–11,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a simple watch stand that prints without support, so if you do not want your watches to lay around the draw, these can be used as organizers. Print instructions preferable printed in PETG to provide some flex, otherwise an easy to print…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thanks Hello! I needed to make a few holes around the house to make some installations and dust was an issue. Decided to design my own guide and dust collector to make it look the way I wanted. It doesn't need supports! =) Hi again! I…
Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Infinite Cube, now optimized for faster printing and minimal material usage! This version is divided into three parts, eliminating the…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena jednego wariantu
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
Updated - July 27, 2024 - added tolerance test and more tolerant sliding covers After receiving a number of complaints about the lid not snapping to the cover and knowing that each individual printer may not be configured to print holes…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Remix of Val's Grogu from Mandolorian Original model https://www.thingiverse.com/thing:4038181
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
*** Assembly Videos At bottom of this page*** Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The best companion for holding small items and looks adorable! Prints in TPU too!!! Commercial Use License: https://cults3d.com/:1225970 65 cent Tip: https://cults3d.com/:1225958
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Wydruk około 11,13 €–13,60 € nettoWstępna wycena jednego wariantu
You can test your support floor and roof with this 50 minute long model.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
This object is part of “Scan The World”. Scan the World is a non-profit initiative introduced by MyMiniFactory, through which we are creating a digital archive of fully 3D printable sculptures, artworks and landmarks from across the globe…
Wydruk około 3,46 €–4,22 € nettoWstępna wycena jednego wariantu
Ever wanted an articulated millipede toy that you could 3D print and not need any supports or any assembly and works straight off the bed? Well here he is. FDM millipede printed in Snolabs Black Amethyst PLA+. 2 layer height, 10% infill…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an amazingly detailed model of The Mandalorian. This model requires absolutely no supports! The included Gcode has the best settings to get the perfect print with PLA. I didn't design this. It is a model that I have had for a…
Wydruk około 7,20 €–8,80 € nettoWstępna wycena jednego wariantu
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint To all God of War fans out there.. I give you Kratos! God of War is a third-person…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…
Wydruk około 14,44 €–17,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Original link by ToScH: https://www.thingiverse.com/thing:291682/files I've make one without the support structures and one in Voronoi structure, a challenge to print, I think. I give you the Blender file by the way, enjoy 😁
Wydruk około 7,03 €–8,59 € nettoWstępna wycena jednego wariantu
This plant support cage is designed with an open side so that you can more easily add it around plants that have already grown, allowing you to more gently add support for leaves, fruits, and vegetables without stressing the branches .…
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the third of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! I Hope you like "Grumpy, the Candle" :-) NEW: I have added new Variants, including A Smaller Version, and Support vor Electric…
Wydruk około 4,97 €–6,07 € nettoWstępna wycena jednego wariantu
This is the second of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight Candles. Here are the Models which…
Wydruk około 5,02 €–6,13 € nettoWstępna wycena jednego wariantu
Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…
Wydruk około 5,15 €–6,30 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) >> You can buy me a coffee here : ) << Commercial License >> cults3d.com
Wydruk około 5,49 €–6,71 € nettoWstępna wycena jednego wariantu
I need hinges for the Laser Cut Stackable 3D Filament Holder I am designing. I had a set of small metal hinges that I used for the prototype, but no idea where or when I bought the originals so I designed these hinges in Fusion 360. The…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop See the whole Neko Cat Collection You can print the box and cat individually to use more colors! Get the original here!:…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Subscribe Now! A great model by Milos. ( https://www.myminifactory.com/object/3d-print-batman-on-a-roof-45713 ) Time-lapse print video : https://youtu.be/uxLFw1A8tTA Remix to support free and printed. Tips: Try to lower along Z until all…
Wydruk około 4,72 €–5,77 € nettoWstępna wycena jednego wariantu
This is a GPU anti sag support holder. It is designed to be as minimalistic as possible. It is intended to be used with Fractal Design Meshify 2 Compact case, but it can work with other cases close in shape and size. Similar metal-made…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
The cat model is to be printed six times and assemble to fit together, like a puzzle. You can change color and mix the cats to personalize like you want. I also added a support to carry the 6 cats pieces.
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you're looking for my Bambu print profiles, they're at MW . If you're looking for my Bambu print profiles for version 2 , they're here. Update (10/2025): There is now a version 2 of the Plant Stem Support ! Now this doesn't mean this…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The idea behind this design was to create a photo frame that is as simple as possible while still being unique in its own way. Standard dimensions 9x13cm 10x15cm Updates 26.03.2022 - Added portrait version for the 10x15 Printing details…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
Wydruk około 12,16 €–14,86 € nettoWstępna wycena jednego wariantu
Tired of the wind slamming your PVC windows shut or swinging them wide open? This 3D Printed Window Keeper is a simple, highly functional wedge designed to sit securely near the hinge mechanism, keeping your window perfectly propped at a…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't forget to hit the like button if this helps you :) A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Simple plant support (trellis) Two versions one with straight spikes printed without supports Second version printed with supports\ Material: PLA, PET-G, ABS etc. Layer high: 0,3 or lower
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small tractor with freely rotating wheels printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly calibrated (to prevent…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
If you like my design, I really appreciate if you can consider a coffee ☕ for me! ( LINK ) Version 2 released! Snaps on sides, slightly easier to open. Overview A business card stand for an exhibition booth or an event table. It folds and…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We've been playing with this fortune telling fidget for days on end. Six possible responses for your fortune, but we also just like to play and spin the dice. Print it in your favorite colors, or mimic the magic 8 ball that inspired it.…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…
Wydruk około 5,66 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ENG] Simple model of a Christmas tractor with Coca Cola trailer. The model is available in two sizes: basic (16mm width), which should be printed in one piece and then the articulated joint can be gently disassembled (it is equipped with…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Conically sliced (16°) Bent Pipe for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
⭐ UPDATE March 2026: I have decided to change the license to Attribution only, which now allows for Commercial use. Additionally many people have printed this with no supports without an issue. It's your call if you think your printer can…
Wydruk około 20,19 €–24,67 € nettoWstępna wycena jednego wariantu
This stackable and interlocking bottle rack is perfect for reusable water bottles, wine bottles, travel mugs, and any other circular object with comparable diameter. The cell has a little more internal space than similar storage systems,…
Wydruk około 9,34 €–11,42 € nettoWstępna wycena jednego wariantu
Used the two great resources ( https://www.thingiverse.com/thing:2990158 ) (thank you guys!) and adapted it a bit: 1) 1. Layer has a larger surface to allow better adhesion to the printingg surface 2) Supports are not needed. The supports…
Wydruk około 6,61 €–8,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
No matter what I tried, PrusaSlicer 2.4.2 insisted on unsupported bridges for the roof of the sharks mouth. I added a cylinder support enforcer to the unsupported section, and after printing, simply removed the supports.
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
For those of you with the X axis that is WAY OFF here is something to fix that. I printed many parts on my Mini but noticed some striping on taller parts. So when I got Octoprint setup and ran Bed Visualizer it was pretty obvious what the…
Wydruk około 3,31 €–4,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ENG] A small Bobcat with freely rotating wheels and a moving shovel printed in one piece. It is printed in the "on its side" position so there is no need to add supports. For functional printing, the first layer and flow must be properly…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
This is Version l of the ring holder, designed for the Prusa Ring Holder Contest . It features textured sides and can hold any size ring up to 5mm wide. Please leave a like and follow to increase the reach of the project! The ring…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
Simple, quick, reliable, non-invasive protection for your Mk4 bed cable. During my time with a Mk3, the heat bed cable was always protected from undue flexing due to sag by INeedOneDesigns excellent MK3 Heatbed Cable Support (Easy Clip…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Conically sliced (16°) Christmas tree for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
It's a heavy-duty construction with additional holes to have tie-downs too. 4 of them can stack up to 0.5m. If you scale it up then, the sky is the limit! Commercial printing license: A US$15 one-time license to make and sell physical…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…
Wydruk około 8,62 €–10,53 € nettoWstępna wycena jednego wariantu
Super easy to print, supportless model. I would highly suggest to print with SILK filaments for best final look.
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Newer 30xx and 40xx series Nvidia graphics cards (probably AMD cards as well) pack a punch, but with that comes extra size & weight. Most PC cases do not come fitted with GPU support hardware. This adjustable model should work for most…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Anyone who enjoys fresh strawberries without dirt or stones will appreciate this perforated strawberry support. Thanks to the support, the fruit ripens dry and there is no risk of mould. The diameter of the support is 21 cm , but of…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Charging Stand for Pixel Watch 2 & 3 Easy to use with the original charging cable of the Pixel Watch 2 & 3 Note: you'll need to mirror the model for the left wrist, as I wear my watch on my right wrist. Print settings: 2 perimeter 0,2…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ENG] Miniature truck with tanker trailer and spare wheels printed in one piece without supports. The model can be printed either as a whole - tractor with semi-trailer connected (it is possible to disconnect it after printing), or the…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Tento 3D model představuje skládací košík, který může sloužit jako dekorace nebo hračka. Košík je navržen tak, aby byl snadno sestavitelný a rozkládatelný. Jeho teleskopický princip umožňuje, aby se složil do malého tvaru a následně se…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Supporto a parete per Amazon Alexa Echo Dot
Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu
Big Lego lightsaber
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Painting supports for placing freshly painted objects. The triangular supports with a ball tip can be safely placed under freshly painted objects to minimize contact. The triangular base shape helps them to remain stable even on uneven…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Table vise - 100% printable - no support - optimized orientation Rock solid: this optimized 3D-printed vise effortlessly withstands a 1 kg load thanks to its high-strength design. Create your own using the included STEP files. Dimensions:…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…
Wydruk około 20,21 €–24,71 € nettoWstępna wycena jednego wariantu
What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Windmill XL Cross- 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Each hinge is made up of two parts in a single STL file and will work right off the print bed. DO NOT USE SUPPORTS as they aren't needed and will likely cause the hinges to not work. The hinges are provided with and without countersunk…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
Quick printing replacement part, even in PLA they can take a good bit of weight. These would be a bit stronger printed in 0.3 instead of 0.2 and with more infill, but if weight is that critical, your probably better off ordering metal…
Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gillette Fusion Razor Travel Case with Blade Cartridge Storage This compact and practical case is designed to protect your Gillette Fusion razor during travel or everyday use. It closes securely to prevent accidental opening while…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
[ENG] Simple anti-stress ring. It consists of two separate circles that can be rotated in relation to each other. When turning, a distinct clicking sound can be felt and heard thanks to the triple spring mechanism. There are two versions…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
I also made camping version. It is here : here Tento inovativní 3D model skládacího ramínka vás ohromí svou jednoduchostí a praktičností. Ve složeném stavu se vejde do dlaně a je tak lehké, že ho můžete nosit kamkoliv. A co je nejlepší?…
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
I designed one support rail with an edge/guide at the left side (for proper alignment of the cutting mat) and a generic rail without edges to be used in the middle and at right side. Each rail comes with two parts for easy and stable…
Wydruk około 4,05 €–4,95 € nettoWstępna wycena jednego wariantu
I liked the scraper design by ncsandor but I saw a few issues with it which I wanted to improve upon. Fillets Using fillets on the Z axis never looks as good as chamfers when it is printed. Also the fillets on the bottom of the original…
Wydruk około 2,63 €–3,22 € nettoWstępna wycena jednego wariantu
I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
Print with 0.2mm layers and 4 perimeters/walls!!! Do not change the orientation of the stl. Do not Scale. Assembly instructions (same as my other semi truck):
Wydruk około 14,64 €–17,90 € nettoWstępna wycena jednego wariantu
This is a remix of nessuno0505's thing but I modified it to hold two small 6x3 round magnets because I didn't have the magnets he used. I also added a small hole to pry the magnets out of the print with a paperclip or a toothpick.
Wydruk około 30,00 €–36,67 € nettoWstępna wycena jednego wariantu
![Business Card Case Holder & Stand [& Credit Card too!] (print-in-place, no support)](https://media.printables.com/media/prints/846c1284-c782-4628-b4ad-1f2f17dfd173/images/11630392_08724ebf-b08e-42b6-a261-58a1bf8a7450_f93918e8-9f3f-411a-b996-adeb883684e5/version-2.jpg)
