684 modeli
Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the Korg Volca stand by beejums . This version of the stand will hold 2 Korg Volcas. Additional supports/parts are not required to keep the Korg Volca's in place. Print 2 and slide onto each side of the devices. Originally…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the fan shroud from https://www.thingiverse.com/thing:375416. Made to fit the Bondtech BMG upgrade for Prusa i3 mk3s with the E3D Volcano heatblock. Should preferably be printed in a high temp material such as ASA or…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
I created this model for the following reasons: Most mounts available are not made for use with Volcano. This design has the BL touch mount height appropriate for the additional length of the Volcano. The mounts that use the roller bolts…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
This volcano-shaped vase features the popular Voronoi pattern, giving it a geometric and modern look. It’s perfect for home decoration or as an artistic piece. The design requires supports to preserve the details during printing. PLA or…
Wydruk około 16,32 €–19,95 € nettoWstępna wycena jednego wariantu
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
Quick to print, support-free design. The Volcano WindWarden adapter mounts a 5015 blower for improved cooling after upgrading to a Volcano hotend. No screws are needed to hold the fan — it clips in securely. The height is adjustable to…
This is a Volcano with base for the Vinegar and Baking soda and dish soap experiment, I have included holes for TPU printable feet and Plug for the bottom (10-15% infill, recommend raft for TPU feet) . For the volcano, I printed it on the…
2023-09-12 version 3: moved the probe so that it can be adjusted without disassembling the entire shroud. Added both the Bambuslicer and the stl files. Lately I attached a heat sink to the front servo (https://amzn.eu/d/e68hmoo) because I…
I wanted a compact way to store spare nozzles, but nothing I found matched all my criteria: Gridfinity compatible and stackable Compact with maximum storage capacity Designed for Ankermake nozzles This bin will store 16 Ankermake nozzles…
Thanks to the amazing work from the Voron team! I added a printhead for the Volcano variant of E3DV6. It is a simple extension of the part cooling ducts from the original Voron Stealthburner E3DV6 printhead. Not the nicest looking mod…
A Duct-Extended v6 Printhead for the Stealthburner The Voron Stealthburner toolhead includes a printhead module that is compatible with a standard v6 hotend. In this mod I attempted to replicate bythorsthunder's mod for the Stealthburner…
I am too lazy to enter what you need as screws but you only need m3 type and a couple nuts. Some holes are self threaded without nuts, you can figure it out if you inspect f3d file. Also bltouch mount is a bit high from nozzle you need…
A perfect day in Printer Island is about the be ruined by an eruption of Mount PLA! https://www.youtube.com/watch?v=3cVqtMMg_AE This thing is a volcano, which uses an LED illuminated ultrasonic mist generator to bring it alive. Assembly…
I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…
Сопла, крышка, подсветка, съёмные, для удобства печати и уменьшения нагрузки. Для термобарьера толщиной 27 мм. Добавил версию, с повышенной жесткостью, вторыми креплениями для вентиляторов, и немного укороченными соплами. Изолировал левый…
Modified Tri horn duct for better flow with volcano hotends. Tested with Phaetus Rapido UHF and CHT Volcano nozzle Update 05/10/2022. File models fixed
For those of you who like to go the minimalist route... From the same designer that brought you all the popular Hero Me remixes... MediaMan introduces the The E3D Minimalist. A simple, clean, lightweight, yet strong mount for your…
…Please at least be sure to hit like & post a make, I'd love to see your prints! Use volcano nozzles in your sv06 plus. DONT LEAVE A BAD REVIEW BECAUSE YOU DID A BAD PRINT! Like the single reviewer here! That's just not cool. It’s…
Found this thing here https://free3d.com/3d-model/volcanion-pokemon-55191.html (I can't link it as a remix parent for some reason) It was not made for 3D printing. I tossed it through some tools and made it 3D print ready. I also posed…
Miminal box for 20 nozzle volcano with interlocking closure. The top cover has a small offset and fits snugly with the bottom.
The Volcanic Pistol Having recently printed the excellent Cattleman Revolver model from agepbiz , I thought to myself: You'll be shocked to hear that I too, have been enjoying Red Dead Redemption 2. So I sat down, spun up Autodesk 360 and…
Volcano fan shroud for MK3s+ This is a meshmix of the mk3s+ fan shroud to work with Volcano Hotend. I have not found a volcano shroud for the mk3s+ so I remixed one from the original Prusa fan shroud. print in ASA or ABS! (PETG and PLA…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…
lightweight and easy to print. correct flow direction adjustment ability no supports needed for fan fastening you need to cut m4 thread in hole. i used self made m4 tap and m4 x 20 screws. use standard print settings. don't forget to…
Behold The Volcano iPhone stand! This iPhone and mobile phone stand came out of one basic question: -How can we design a phone stand that has built in three most usable angles for a mobile phone, and doing that in a simple and iconic…
🌋 Volcanic Tealight Holder – A Warm Eruption for Your Desk! A miniature natural wonder that instantly transforms the atmosphere of your home or office! When paired with a standard LED tealight, this Volcanic Tealight Holder creates a…
Print model in PLA and plug in TPU
Print upside down. So that the funnel is at the bottom and the thread is at the top. no supports necessary.
Print the volcano put down some vinegard from the top hole add few gr of baking soda and wait for the eruption You want to start with few vinegard and small quantity of baking soda and then decide how much you want to erupt the volcano…
Contains an opening for a hose / air stone as well as openings on the bottom for weights
HOW I USE IT: ENDER 5 PLUS: https://bit.ly/2YHzpws BMG: clon:…
Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan. Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs. EDIT 2020-12-12: The first version of this duct was completely…
This is a remix of the original nozzlebox with options that fit Volcano and MK8 nozzles. Like the original, it prints in place and is locked by a magnet (6x2mm!) and an M3x6 (or smaller) screw. It doesn't come with any markings so that…
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
This is an extended version of the Voron Afterburner parts that was made to house the TriangleLab CHC Pro 24V hotend using a V6 style mount. The Afterburner was chosen since it's easier to modify than Stealthburner. This version adds an…
Remixed the great design from "bythorsthunder" for a dragon volcano mount. Just print the front cover from his GitHub Page “ [a]_Stealth_Rapido_UHF_Front.stl ” and the original backpiece for the stealthburner. In my Setup i used a regular…
Two versions Z2.5 for stock nozzle no changes needed. Also suites K1 nozzle with 0.7mm extra clearance over stock. Z4.0 For Volcano nozzle. Multiple Fan adaptor options 2 x 5015 1 x 5015 For K1 and Volcano nozzle refer to the Nozzle/Heat…
Designed to make your plant look like an erupting volcano. Looks best with Haworthia succulents. This model comes in two sizes: large and small. Both accommodate a 3-inch pot with a 2.25 inch base. Resize as appropriate. The large model,…
I had a difficult time filling up my new S&B Volcano Hybrid without spilling all over the place. I decided to create a screw on funnel for the filling chamber. I tried to make it look like an original accessory. It's my first design, hope…
The Volcano Vase is a bold and dramatic centerpiece inspired by the raw power and elegance of volcanic landscapes. Its sleek black finish and unique open design evoke the flow of molten lava, creating a striking visual impact. Ideal for…
Changed the other end of the Herb Tool's shovel to a tamper that measures 12.5mm OD and is designed to fit the Venty vaporizer from S&B, but will fit a variety of other ones as well. Don't use on warm items. I printed in [dried] PETG with…
CR-10 Heavy Duty Modular E3D V6 Mount I have started a Shapeways shop where you can get these parts printed. I have special versions of the V6 mount designed for Aluminium. At the moment the shop doesn't have much as I'm still setting it…
Behold The Volcano iPhone stand, now available in upgraded Version 2! The screen on the phone is now visible all the way to the edge, regardless of angle, since the outer walls are individually lowerered. The middle cone is now hollow,…
Don't want to do your school project? Just print this out for less effort.
A little box i designed for Volcano and classic E3D nozzles. Split the stl in your slicer before printing if you're using v6, otherwise use separate files for lid and case. Print instructions Category: 3D Printer Accessories Print…
Storz & Bickel Volcano Hybrid Dust Cover - Grinder fits on top
ENGLISH: Stand with modular elements to better organize your Korg Volca synths. There is an additional module for the Volca Modular cables that fits into the base that supports the synth. If you also own a Korg NTS-1 you can add it to the…
Qidi nozzles are 3 mm shorter than Volcano ones. So the inductive probe of the X-MAX 3 gets an error when trying to set the Z-Offset. With this very simple print, the probe is lowered and you can use both Qidi and Volcano nozzles. Simply…
Angled Stand for Korg Volca This is a simple one-piece design that attaches to any Korg Volca to raise and angle it. It works well when placed behind a small desktop keyboard, like the Korg microKEY or the Korg nano controllers
This modification is to enable the full print volume of the Prusa i3 MK2.5,MK3, MK2.5S and MK3S when fitted with a Volcano heater block and nozzle without any firmware changes. Included in the modification are adjusters that fit between…
This height-adjustable fan duct and mount will work with the latest (titan) version of the Kingroon KP3S to allow you to use either the stock titan extruder or a BMG with a E3D V6, E3D volcano, NF smart, etc hotend. Some additional M3…
Volcano for science experiment
This is a stylized volcano for the board game Tikal. Instructions You will need three volcanos for the board game Tikal. As its based on random numbers, it will look different each time you redraw the volcano using OpenSCAD (free…
This is quickly prepared in Fusion 360 to have any print cooling on my MK2.5S with Volcano hotend. It's not optimized or flow-tested in any way, I pretty much just roughly extended the stock shroud. Use ABS or similar high-temp plastic…
extra m3 nut and 4 or 6mm bolt are required. sensor position stays the same, no probe offset correction is required first version will fit better but it requires supports – see attached screenshots on how to place them
This is a remix of one of @CalebKraft’s 6mm trim pot caps, originally designed for the FM-1. They fit the 6mm trim pot knobs found on most desktop mini synths, including the Korg Volca series, Roland AIRA Compact series, Behringer Mini…
This is a new mount for the Biqu H2 on any Artillery Sidewinder or Genius that I designed and tested with https://www.youtube.com/c/SolarityTechnology . There are two versions, one for the normal hotend, the other for a volcano hotend,…
Design and Use This adapter allows you to combine Storz & Bickel Easy Valve Balloon with a water pipe that has a 14mm female fitting. These balloons are used with Storz & Bickel Volcano Vaporisers, they're pictured here with a Sneaky Pete…
Volcano Design to go with the classic chemistry experiment- the inside is slightly larger than the opening to give slight resistance to the foam escaping. the sides are sculpted to have three deep lava “flows” for a cool visual effect. We…
Ever since I upgraded the extruder on my Genius to a BMG + V6 hotend, I'd been rocking Chanh55's excellent cooling duct. It performs great, and my only quibble is that it's a bit chonky. This inhibits visibility a bit and requires a…
Hello, I have designed simple dust cover for Volcano hybrid vaporizer from Storz & Bickel. You can print it with PLA or PET(G), or other materials. If you print it with PLA, be careful to firs cool down vaporizer. I printed with PETG…
This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…
These parts are based on the Original Prusa i3 MK3/s parts, they've been modified to fit the E3D - Volcano hotend. Modifications include I lifted the body 8.5mm to account for increased hotend height. (no firmware change required for…
Upgraded version of the EVA Mod for Trident/2.4 with support for the V6 Volcano and the regular voron drag chain. Sadly it reduces the print volume (depending on your cable routing skills) by 30mm but gives you the convenience of a cheap…
QIDI X Smart/Plus/Max 3 Fan duct for volcano nozzle and 5015 fan
SV01 Pro print head is pretty unique and proprietary but can be upgraded to all metal heatbreak, volcano hotend and dual 5015 fan. Will not work on base SV01, this is only for Pro version. A. All metal heatbreak This step can be safely…
Part of an Automata Design I made. Has 6 Square ¼ dowl holes that can be used along with a main channel in the center.
🌋 What Is a Volcano? (Earth’s Spicy Mountain) A volcano is basically a mountain with a very dramatic personality . Most mountains just sit quietly, looking pretty. Volcanoes, on the other hand, sit there thinking: 🔥 “Hmm… what if I YEET…
Added stronger three-arm version. One- and two-arm versions are also different, but you need to re-render them from the scad file.
This model is meant to be used as an asset in CAD software, not to be 3d printed. My ultimate goal with this CAD model series is to release at some point an assembly model of the whole K1 to help creators design amazing things for this…
I want a light volcano hotend and i went for mellow one with mount simple and quick with my version of Fan-Duct . Fan-Duct with 2 versions the V2 I printed it with minimal support but might be without support depending on the choice of…
If you are using this fan duct for a volcano nozzle on your ender 3 s1/s1 pro, I highly recommend using this longer remix of the ‘ X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)’, which simply has its two…
RatRig V-core 3.1 Euclid Mount & Dock for Eva Volcano Duct x_offset: -27.94 y_offset: -20.21 Please upload your makes, would love to see them
Based on vzbot fan duct design, created my own low-cost version which uses two 5015 blower fans instead of using WS7040 printed with ABS or PETG CPAP hose I use https://a.aliexpress.com/_mM4FWka https://github.com/VzBoT3D/VzBoT-Vz330 Buy…
Ich habe für meinen Anycubic Chiron einen Voron Afterburner entworfen.
The complete rack (for 3 devices) consists of 5 parts which I glued together. For the first (lower) device there is only one part (red in drawing). The second (middle, yellow in drawing) and third (top, blue in drawing) has two parts -…
Same rear is used in both variants. First folder: 9.5mm added to fit a volcano v6 hotend. Second folder: 9.5mm added to fit a volcano v6 hotend and mount a 4020 heatsink fan.
Beacon Rev D and another for Rev H.
This is a model based on a stock Storz & Bickel Volcano Easy Valve Mouthpiece. It's aimed to be as dimensionally and functionally identical to the original, which is reflected in the default settings and included stl. It can be customized…
The first thing i did after ordering my Volcano Hybrid was searching for any storage solutions that not only protect the device itself, but also keep all accesories within reach. As the famous “Volcano Case” by Vaporizeit isn't available…
Remix of the Korg Volca stand by beejums . This simplified and slimmer version is enough to hold your Volca securely. Print 2 models and enjoy making music with a better viewing angle on your Volca ;-) 3D Printing settings used Prusament…
Made for Storz & Bickel Volcano Stock one hybrid filling chamber in this little round safe. Screw cap & logo insert.
I needed the stealthburner to fit volcano size nozzle and filametrix.
TinyMtn Free Pack 15 - Ring of Fire This is a package with sets of 3D model files for four symmetric volcanic cones on the Ring of Fire. Mount Agung, 3031 m / 9944 ft Mt. Fuji, 3776 m / 12,388 ft Kronotskaya Sopka, 3528 m / 11,575 ft…
Later Edit: Links to all the parts we have used to build this ToolHead can be found at the end of this description. Enjoy! Introducing the CN 3D MiniStealthBurner: a revolutionary upgrade for your 3D Printer. (Adapter for more printers…
A remix to store Volcano size nozzle
German below. A stylish business card holder for about 60 business cards, designed to resemble a lava-spewing volcano. It is designed for business cards measuring 85 x 55 mm . Although slightly longer cards will also fit. The holder is…
Thanks to the original creators Greg191134 and techoutreach for their work. This model and is based on techoutreach's version with a few tweaks. Like techoutreach's version, you can change the hotend without removing the BMG extruder.…
Volcano-Mosquito - Mellow Pint-Head for stealthBurner Appreciate my work ? HERE !
This 3D-printed erupting volcano diorama brings molten drama to your shelf! The model is designed with separate lava insert pieces, which can be printed in red filament and slotted into the volcano's surface. Inside, there's a cavity…
This is my remix of miniaftersherpa which should fit Trianglelabs CHC PRO perfectly, should also be alright for V6 Volcano.
This model can be combined. I made two part because straight part need to paint with red. That's why easy to print. You can use your project or what you want. If you have any question you can also ask to me. Thank youuu. Have a good…
This is a printable (no support required) toolhead to adapt a Volcano hotend to a Tevo Tornado using a BMG extruder in direct configuration. I also have the Prusa Mk3 style duct added to the system, as well as a BLTouch mount. In order to…
This is a two-piece MagiQuarium-style lid to fit the Sea Monkeys Ocean Volcano tank. It is very similar to my Magic Zoo lid and has a hole sized to fit the official magnifying lid that comes with the Magic Castle and Mars tanks.
!! You will find add-ons (e.g. the lava pits) for free / pay what you want in my ko-fi shop !! Volcanic cave walls for the MagHex system. Intended to use in Gloomhaven nd Frosthaven. Regular MagHex bases (3x3 mm magnets) are included.…
![STRETCHED Taurus V4 Cooling Duct for Volcano Nozzles [for Creality Sprite Extruder, Dual 5015 Fans, Ender 3 S1/S1 Pro/S1 Plus (Stock / Spider / Ceramic)]](https://media.printables.com/media/prints/651324/images/5137287_00b253b9-b040-44b3-9428-07f481b627bc_785c15d9-bb82-46fd-a552-3bee22b6d0d9/stretched-taurus-duct-cover.png)
