Sawyer Water filter to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter
Water filter Sawyer to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter. Inspered by hweat model. Modelet a
- Pobrania
- 196
- Polubienia
- 40
- Ocena
- 0
78 modeli
Water filter Sawyer to Nalgene Bottle and Helikon Bottle - Universal Filter Adapter. Inspered by hweat model. Modelet a
I recently had the need to add overarm dust collection to my sawstop CNS I decided to go this route : buy the blade guard with dust collection (TSG-DC) because it is a safety element and DIY the rest of the system (tubing, hose…
Wye? Y? Thinking they really should be wye since that's what they are called in plumbing. ...ANYWAY... Why another wye? Obviously because none quite worked for me. I had issues with friction and really bad luck with crappy imported…
This is an improved version of my previous design , it doesn't need any hardware anymore and better holds guides in place. The switch is compatible with standard lego city tracks, it features spring action allowing train to come in from…
Improved version available here https://www.printables.com/model/435191-lego-compatible-wye-switch-r40-v3-standard-curve The switch is compatible with standard lego city tracks, it features spring action allowing train to come in from…
This is a connector to join a water bottle to the output of a Sawyer Squeeze water filter. See Squeeze Water Filtration System for details. This model has a standard 28mm thread, so it will fit the majority of store bought PET bottles, as…
Adapter for the Sawyer Squeeze Water Filter to directly connect it to a SmartWater bottle. Doesn't require supports to print. I have JSCAD code available it needed.
(Rev 2) Total newb here. I made three prints of the original Adapter (in PETG), trying different print settings for the original. They all leaked - at the rounded midpoint, which cannot make a good seal with either the Smart bottle or the…
An improved adapter for the SawStop PCS overarm dust collector. The one that comes with the overarm has a hard 90 degree takeoff that results in mediocre flow to the overarm and reduces flow to the saw as well. This “Divided Wye” design…
Fits into the end of the sawyer squeeze to prevent it from leaking in your pack.
Description: This model offers a great solution for attaching a Sawyer Squeeze filter to a large water container like the CNOC 3L Vecto 42mm. The adapter acts as a 42mm female to a 28mm male adapter. I take my Vecto with me often for…
I designed simple cap to protect Sawyer water filter intake. I decided to reuse part of water bottle.
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 1/2" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
Custom designed caps that prevents leaking in your pack as well as protecting your Sawyer Squeeze from unnecessary dirt and grime. Compatible with both the Sawyer Squeeze and the Sawyer Micro Squeeze. Each cap has a hole for attaching guy…
This coupler was inspired by @Mike_122337's BeFree Backflush Adapter. I've shared this design with his permission. This Coupler is designed to provide a stable connection between a BeFree or Sawyer (Micro) Squeeze Filter and a water or…
Designed to fit onto a prusa printer (though just barely) and be able to hook up 4 inch drops for tools into the 6 inch ducting. Changelog Aug 1, 2022 (v13) - Initial release Aug 29, 2022 (v14) - Updated 4" drop to fit an blast gate on them
Attach a Hydrapak Seeker bladder directly to a Sawyer Squeeze filter. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Category: Sport & Outdoors
Sawyer mini filter cap Reupload from thingiverse.com by pitboss8881
It fits the sawyer squeeze to the hydrapak ultraflask (speed 600ml) threads. printed without supports, adhesion, and no cleanup. hydrapak threads: pitch 3.4 mm
Not recommended for high pressure or fuel applications. Hose in photos is a 1/4" I.D. x 3/8" O.D. Clear Vinyl Tubing. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped…
Recommend printing with TPU - allows for a slight flex when connecting to hoses and piping.
I have several Sawyer Mini water filters however I wanted to be able to attach them to various accessories and directly to Smart Water bottles while hiking. Sawyer sells a dual threaded version for using accessories so I made an…
Do you hate when grungy mysterious pond water soaks your fresh undies during a backpacking trip? Well here's a cap for the unfiltered side of your sawyer squeeze water filter. Print in place swivel so the cap can turn freely and is…
Adapter to attach a Sawyer Squeeze to a Nalgene narrow water bottle, with a vent for the air displaced when water enters the bottle. Printed at 0.2mm with organic supports, but will probably print fine without them.
20cm high lawyer LEGO Don't forget to print 2 hands (; I did the remix to make this LEGO a French lawyer Settings : Support : ON Infill : 10% grid Brim : ON Update : 23/07/2023 : I make a new part “Sevrus snape body” for those who want to…
A threaded variant of the Sawyer Intake Cap from Ivo Slanina
I modified the switch section to fit my electronic switch box i use for my Lego track setup. I took some design objects from the WYE splitter done by Lev and adapted it to this track by vaxx1969 to have some spring action on the switcher…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 3/8" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
This is a case for the disc pick which Lock Picking Lawyer and Bosnian Bill made. 3x5mm magnets are used to keep the case closed, 2x1mm magnets to hold the spare pick and the hex key in place and 10x1mm magnets in the space for the spare…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 5/8" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
Best printed by standing on its end on build plate with supports for the one inner ledge. All other angles are 45 degrees, so should be handled as an easy overhang.
I designed this wye to connect two branches of a wood dust collection system into a central collector. The blast gate can slide to one port or the other, pulling from one of the branches at a time. It's designed to fit 4 inch PVC piping.…
Gridfinity 3x2 base. If you have the option use variable layers to print for a better result. It fits perfectly on top or underneath my tubular impressioning tool bin that can be found here:…
[AN] Screw the adapter to your water bottle/bag and put the outlet of the sawyer mini filter through the v shaped opening on the side and let the water bottle hang from the filter. The larger the volume of water to be filtered the faster…
Part of our new Profession Busts series featuring various jobs and custom text plaque. The .3mf file includes the text already placed into the plaque of the stand all you have to do is click text then use the text object button on Bambu…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 5/16" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with…
Part of our new Profession Busts series featuring various jobs and custom text plaque. The .3mf file includes the text already placed into the plaque of the stand all you have to do is click text then use the text object button on Bambu…
A zero support wye/tee fitting for 4" duct systems. designed to print without supports! You'll need a brim, though, because there's very little contact area on the build plate. it's 4" OD, so the duct slips over it. I printed in both ASA…
Sawyer Angus's Roblox character
Ein Vorfilter für den Sawyer Mini. Schützt vor mechanischer Verstopfung durch grobe Verunreinigungen des Wassers. Settings for Slicer: set bottom and Top Layer thickness to 0 and infill to Gyroid
This is a wye hopper for nerf darts. Compatible with modern 0.5" foam darts. Couples with ½" PVC barrels or 16mm OD barrels. Fits into the 1.360" internal diameter of 1.25" PVC, and secured by 3 m3x8 screws. Add a pause to the print to…
Hanging ring that installs over the fill port of a Sawyer One Gallon Gravity Water Filter. Use paracord or similar through the small hole. When hanging from this position, less water is trapped in the bag while filtering (compared to when…
Add-on to place your "KleenSlate" Pen on a Birns & Sawyer Clapper board. It also add an attachment hole to organize the slate on set Juste replace the existing screws with m3x20 screw and m3 nuts This is quite specific to my setup but…
I modified a couple of parts to fit my switcher
This is a Y fitting that allows joining 3" corrugated drain pipe into a 4" pipe. You'll have to excuse the main photo - I had a design problem when printing (2 components of the design were not fully connected to each other). The attached…
I like the Y-tho. I didn't much care for its grip, and I didn't care for the reliability of its feeding. So I grabbed the grip off the Skewer (…
A new 3D figurine generated by AI, a Chibi Tom Sawyer. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Version of the curved hopper with 1-1/4" PVC couplers at the front and back. Has internal slots for m3 nuts - add a pause in the print and insert the nuts mid-print.
You will almost definitely lose some performance compared to using the SCH 40 or integrated Wye hopper that Silly included in his files, but if you too are wary of repeatedly removing screws from printed plastic in order to swap out…
This is a stand to hold a Dwyer Rate-Master Polycarbonate Flowmeter (Model A) upright on a desk surface. Dwyer expects you to mount these to vertical surfaces, but if you are doing some basic testing with temporary set ups, you don't want…
This hyper-realistic model of a VIP of the court! He can't even do anything, yet I don't care! He looks so real, even with the realistic tired/annoyed eyes! Live life one lawyer/O.C. at a time!
This was a silly model (see source image) that I found in my backlog and thought I'd do. I ended up doing a LOT of dynamic topology remeshing and the size was reduced a ton. I tried to emphasize the collar and tie etc... I also added a…
Need three ducts connected together? Good luck! Originally designed for flexible ducts, I never actually printed this and instead with with a commercial ABS offering. Part of the issue was trying to figure out a support-less version. I…
This is a remix of CaptainSlug's Wye files to be printed and used on the threaded rod Caliburn. I suppose you may be able to use this on a TalonClaw as well. If you wish to print and sell this item, please contact me for licensing. I can…
based on a request by a commenter to the original (great!) model, I lengthened the center tab 5mm
I stumbled upon a 2008 blog post by Adrian Bowyer, the inventor of the RepRap Project in 2005, where he talked about designing a coat hook so he could hang is lab cost somewhere other than his tripod. You can read the post here:…
I have a 3/4hp Dust Right dust collector from Rockler and the Oneida Super Dust Deputy. I previously plumbed the intake to my table saw, but wanted an aux connection for a hose I can use more flexibly with other tools. The Dust Right came…
This wye splitter offers features unique to adapting to a Core One swing arm to take advantage of the original splitters use of PC4-M10 ptfe fittings. These fittings allow ptfe tubing to pass completely through each fitting to contact…
Printed but not tested, theory is that wye should fit loosely and ride up as Z height increases during print to prevent binding. Not sure if wye will properly reseat when Z is lowered. If it binds a larger throat taper or similar will be…
Dust Collection Fitting - 6" to 2" Wye My wood shop dust collection system is designed with 6" PVC "Sewer and drain" pipe for the primary runs, but I needed to take a branch off the main run for 2" schedule 40 PVC pipe. Not finding a…
ампочка покупная с озона, разбирается снимается цоколь и рассеиватель, посадочное гнездо 28мм, высота 10-12мм. Лампочка на ДУ управлении можно выбирать цвет ночника, а так же выключать ее. С обратной стороны фото или изображение.…
USB WYE - Power Only This is a power-only USB wye adaptor. Yes, I know. They sell USB splitter cables for a song, but where's the fun in that? The data lines are not connected. The utility of this device is simply to power or charge two…
The Pet Dryer 2-to-1 Hose Wye Adapter combines the power of two portable half-sized pet hair dryers into one hose. While ideally, you would want a full-size, dual fan motor dog dryer mounted to the wall, if you had two half-size single…
A personalized name keychain in 2 colors, the colors are customizable from the slicer. Make sure you've calibrated your filament flow. If you'd like the same style with your name, leave a comment or email me and it will be added. 💬 If…
Work themed clock is just the face, but it was designed to go with these backs using the magnets and windings I already had. The backs are listed in the “download stl files” option. One for using the hanger built into the winding, the…
Use worker threaded barrels with a 16mm heat set insert (from out of darts) on a wye bow. Standard wye bow hardware, tc / caliburn size plunger tube, (solid! not hollow!) fiberglass driveway marker rods, string or paracord, threaded…
Print like how the original was intended. I went for 12-15 walls and 35% gyroid infill, since mine hits high for a wye bow. Im using a 45cm 12.8mm Bearrel which had a slightly bigger OD than 16 so i trimmed the entry back a tiny bit to…
Dieses kreative Zahnstocher-Design in Form von „2027“ ist ein echter Hingucker! Perfekt als Dekoration für Pflanzen, Snacks oder als originelles Detail auf dem Tisch. ✔ Einzigartiges Jahreszahlen-Design (2027) ✔ Vielseitig einsetzbar –…
To enhance my enjoyment of still water and my soda maker, I sought a way to use my Sawyer water filter at home. Initially, I planned to create a holder for a PET bottle to achieve gravity filtration, enabling the Sawyer to screw onto the…
Dashboard to represent the jury for the board game Lawyer Up! This dashboard replaces the 12 jury cards into a single piece, and makes it super easy to tell whether the jury is on your side or the opponent's. This fits in the box (with…
A basket for the Sawyer Bikes Baby Ride that snaps directly onto the bike — no hardware, no drilling, no modifications to the bike. Gives little riders somewhere to carry toys, snacks, and whatever they pick up along the way. Key features…
A compact, four-part shower attachment for the 28 mm CNOC bag used with my Sawyer Squeeze setup. It replaces the filter for shower use and adds a hand-operated shutoff valve. The upper body has fixed grip tabs for attaching and removing…
A zero support wye/tee fitting for 4" duct systems. designed to print without supports! You'll need a brim, though, because there's very little contact area on the build plate. it's 4" OD, so the duct slips over it. I printed in both ASA…
The Pet Dryer 2-to-1 Hose Wye Adapter combines the power of two portable half-sized pet hair dryers into one hose. While ideally, you would want a full-size, dual fan motor dog dryer mounted to the wall, if you had two half-size single…
Dieses kreative Zahnstocher-Design in Form von „2027“ ist ein echter Hingucker! Perfekt als Dekoration für Pflanzen, Snacks oder als originelles Detail auf dem Tisch. ✔ Einzigartiges Jahreszahlen-Design (2027) ✔ Vielseitig einsetzbar –…
ампочка покупная с озона, разбирается снимается цоколь и рассеиватель, посадочное гнездо 28мм, высота 10-12мм. Лампочка на ДУ управлении можно выбирать цвет ночника, а так же выключать ее. С обратной стороны фото или изображение.…