Wyniki wyszukiwania: x220

Sortowanie

113 modeli

P
Printablesdmdesign

Ender 3 V3 KE Bed Mesh Level Test (220x220mm - 5x5 Mesh)

A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…

Pobrania
3213
Polubienia
159
Ocena
5
P
PrintablesGhostPants

Ender 3, 3P, S1, S1P first layer test 220x220

Print layer height a .2 on printer to test first layer

Pobrania
1186
Polubienia
18
Ocena
5
P
Printablesmathiasl

Corner Shelf 220x220

Liked the shelf by Pizzaman76 but wanted it a bit bigger so I made it 220x220mm

Pobrania
516
Polubienia
62
Ocena
5
P
PrintablesAqua9384

220x220 First Layer Test

Print at a layer height of 0.2 mm If you want to make it bigger or smaller change the X and Y scale, leave Z at 100%

Pobrania
286
Polubienia
7
Ocena
5
P
Printablesiggy

Thinkpad X230 X230i X230T X220 X220i X220T Hard Disk Drive (HDD) Cover - FRU 04W1414

I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…

Pobrania
243
Polubienia
20
Ocena
5
P
PrintablesPrinterfreak

Bed Level Adjustment Tool - 220x220mm Beds

This 3D Model is always helping me out even if i use a Bed Level Sensor to get the perfect first Layer. You can Stop the print after the First Layer its just heigher for better view. Filament: PLA, PETG, ABS, ASA Layerheight: 0.2mm

Pobrania
232
Polubienia
12
Ocena
5
P
PrintablesVeillax135

16pt/25pt Bed Leveling Mesh for 220x220mm Bed

This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 20mmx20mmx0.2mm squares in a 4x4 grid with 2x200x0.2 lines connecting each grid element to provide whole…

Pobrania
184
Polubienia
6
Ocena
5
P
PrintablesKevin

The Prusacaster - a 3D printable guitar (No Hassle 220x220 Build Plate Prepped)

These are orientations I have made in order to fit this project easily onto a 220x220 built plate and save you the time

Pobrania
182
Polubienia
12
Ocena
2
P
Printablesfacelesstech

Thinkpad x220 SSD caddy

Found out my refurbished thinkpad x220 only came with one hard drive caddy arm. I wanted to also take advantage of the fact that you can easily swap the hard drives on the thinkpad x220 too.

Pobrania
176
Polubienia
22
Ocena
5
P
PrintablesHel3D

Bed level test 220x220x0.2

Bed level test for a 220x220 bed. There are plenty of similar bed tests but I wanted one specifically for my printer to just load and run. Set walls to 1 Turn off prime spiral or line or similar as the print will take up that space as…

Pobrania
167
Polubienia
10
Ocena
5
P
Printablesagroczech

Kompletní model dronu Eachine Wizard x220

Ahoj, toto je moje diplomová práce z roku 2020. Rád bych se s vámi o ní podělil, jelikož se jedná o plně funkční model. Jedná se o kopii Eachine Wizard x220 s drobnými úpravami (zpěvnění ramen atp. kvůli tisku z plastu). Šroubky jsou…

Pobrania
149
Polubienia
16
Ocena
0
P
PrintablesBuraku

Bed + Bed Frame 180x220cm - 1:10 - House / Home Mockup Furniture

Adjust the scale using print scale on your slicer, this model is 1:10.

Pobrania
137
Polubienia
18
Ocena
0

Cascade separated for 3D Printing (220x220 bed)

Here is my video explaining the process of making such wall arts:

Pobrania
136
Polubienia
31
Ocena
0
P
PrintablesRobert Schiele

Laptop Camera Cover for ThinkPad X220

Due to the simplicity of the model no supports are needed. I printed with PETG with 0.2mm layer size on 0.4mm nozzle. The exact material and configuration you are using do not matter a lot though I guess.

Pobrania
124
Polubienia
12
Ocena
0
P
PrintablesJamie

ATX PSU bracket for 10 inch rack 220x220 mm Version

2U sized mount for an ATX PSU in a 10-inch rack modified for a 220×220 mm build plate I would highly recommend printing in PETG rather than PLA, as PLA may deform from tension and heat. If you place this model in the centre of the build…

Pobrania
122
Polubienia
17
Ocena
0
P
PrintablesArkovski

World map 3d with elevation | (grouped & adjusted (cut) for smaller bed types - 220x220)

PETG, 5% infill, 2 layers. Maybe 200x200 will be fine with small mods. If you want so, let me know in the comments, I'll create smaller versions then. It's a simple work, but boring and took me quite some time, so you don't have to waste…

Pobrania
119
Polubienia
9
Ocena
5
P
Printablesysengard

Thinkpad Badge Logo for X220

Replacement badge for the Lenovo Thinkpad x220, its designed to be printed with multiple colors, but it can be printed in a single color as well. Size of the model : 26.5mm x 9.5mm Print settings: Layer height : 0.2mm Add color change on…

Pobrania
110
Polubienia
8
Ocena
5
P
PrintablesMikRobi

Electric motor fan 58x220mm

Electric motor fan 58x220mm

Pobrania
105
Polubienia
16
Ocena
0
P
Printablesblakek

Anycubic Mega S - guide for 220x220 build plate install

These are for helping align a smaller 220x220 build plate for a Anycubic Mega S. The default build plate is 240x220 (build area is 210x210 due to clips). I wanted to change the default glass for a PEI sheet, but it's very difficult to…

Pobrania
105
Polubienia
18
Ocena
0
P
PrintablesNillerk

Star Wars C3PO Hueforge 220x220

Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings. This is done in 2 prints and then the C3PO is carefully put into the background piece. It is…

Pobrania
102
Polubienia
28
Ocena
0
P
PrintablesTrash Cant

220x220 bed level

remixed to fit on 220x220 bed

Pobrania
94
Polubienia
5
Ocena
0
P
PrintablesKotei Koteevich

Cat moon halloween 140x220 Hueforge

The painting “Cat moon halloween” for my Light frame for hueforge / lithophane arts This work was created for "Halloween 2026: Make It Move 🎃" Among the movable elements there is a hinge for the foot, which acts as a stand for the frame…

Pobrania
87
Polubienia
43
Ocena
5
P
PrintablesSaintVY

Quest 2 Elite Strap to Quest 3 strap replacement (shortened for 220x220 beds)

This is the same model, but shortened by 15 mm to fit in size for 220x220 tables (like Sapphire Pro).

Pobrania
80
Polubienia
7
Ocena
0
P
PrintablesSkyline989

Eachine Wizard X220S Cinewhoop Conversion Ducts

Print in PETG Props need to be trimmed a litte bit

Pobrania
80
Polubienia
13
Ocena
0
P
PrintablesLoXiRe

220x220x2 mm circle test

I had a problem on my ender 3 s1 pro on prusa slicer thaqt i could not use my full bed size due to the purge line in the gcode and printer profile in prusaslicer . That is kinda fooling the slicer so if ANYONE has a better way of doing it…

Pobrania
77
Polubienia
6
Ocena
0
P
PrintablesDadof3

Socket org. (metric) V3 (will fit 220mmx220mm print bed)

The first version I uploaded was 207mm wide. On my Ender3 v2 it would not slice. I changed the print bed size, it did slice then, but one side was not able to put the brim down correctly. I squeezed everything tighter and was able to get…

Pobrania
77
Polubienia
17
Ocena
0
P
PrintablesMr_Kes

Lenovo X220 X230 HDD / SSD bracket

Bracket for Lenovo X220 X230 2.5" HDD / SSD. You need two pcs of this to insert drive into laptop. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: gembird PLA+ red…

Pobrania
77
Polubienia
3
Ocena
0
P
PrintablesPolymentor

Hand saw - 300 mm blades (printable on 220x220 bed)

Design considerations: use 300 mm saw blades, ergonomic, but small enough to be printed on 220x220 mm bed. To mount the blade you need two M4 screws (at least 25 mm long) and two M4 nuts. Recommended print settings: if your print bed is…

Pobrania
72
Polubienia
10
Ocena
0
P
PrintablesRobas1

GPS BN-880Q and antenna holder 5 inch drone Eachine Wizzard X220 V2

Hi, this is my original project for Eachine Wizzard X220 V2 (but it will also suit to many other 5" quad drones). It's size is designed for typical antennas and Beitian GPS BN-880Q with compass. Print it in slow motion with 100% infill…

Pobrania
72
Polubienia
8
Ocena
0
P
Printablesbeckhdtm

Little Boy S ATX PSU Single Full PCIe 220x220mm Bed Optimized

LIGHT BOY S FULL ATX PSU SINGLE FULL PCIE Every piece as been remodeled from scratch for a 220mm x 220mm bed size. 0.3mm tolerances. (loosy goosy for the lazy people, like me :) ) Accommodates 2x 120mm slim 15mm height fans located on…

Pobrania
69
Polubienia
11
Ocena
0
P
Printables43D PRINT

Delonghi extension (remix of Findusdwarf) for bed 220x220 no supports around

No need supports to outer part (because I added chamfer)

Pobrania
67
Polubienia
7
Ocena
0
P
PrintablesBasementLAB

Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style

Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…

Pobrania
65
Polubienia
12
Ocena
0
P
Printablesjws

Thinkpad X220 Hard Drive Cover

Print with bottom side down

Pobrania
64
Polubienia
3
Ocena
0
P
PrintablesLachsmalstift

220x220 First Layer Test

Print this and adjust your Z-Offset while its printing! Works for Bed leveling too!

Pobrania
61
Polubienia
1
Ocena
0
P
PrintablesEduard Sukharev

Stackable Keycaps box - 220x220, spiral mode

Quick print vase mode stackable tray box for mechanical keyboard keycaps. Holds up to 120u of keycaps. Prints both tray and lid in vase mode.

Pobrania
54
Polubienia
5
Ocena
2
P
PrintablesGiggle

EACHINE Wizard X220 Feet (16mm)

EACHINE Wizard X220 Feet (16mm) Drone skid plate/feet, designed for my EACHINE Wizard X220. I used M3x10mm Titanium screws with these feet, they go through the feet, frame and motor protectors to screw into the motor. The motor screw…

Pobrania
54
Polubienia
5
Ocena
0
P
PrintablesMikRobi

Electric motor fan 58x220mm

Electric motor fan 58x220mm

Pobrania
52
Polubienia
7
Ocena
0
P
Printablessquirrelf3d

VZbot Display Mount - remixed to be printable on 220x220mm bed

Parts are not oriented, I'll let you play with that in your slicer The larger piece does fit flat on 220x220 (longest length is 215mm) check original post for more info, and/or want to print it as a single piece…

Pobrania
52
Polubienia
12
Ocena
0
P
PrintablesDDD Projects

Brick Floor Chess Board Multi-layer Coloring 220x220

I wanted a single print chess/checker board that would fit on my Ender 3 printer. I designed this board to fit with-in the 220x220 bed size. To print the darker squares, use post processing of gcode and enter a pause. Finally switch the…

Pobrania
50
Polubienia
7
Ocena
0
P
PrintablesLoading

Eachine wizard x220 v2 arm end

Probably best printed in tpu or some sort of wear resistant filament

Pobrania
46
Polubienia
6
Ocena
5
P
PrintablesSkyline989

Eachine Wizard X220S Antenna Relocation

Relocates the antenna to a much more crash resistant location. Print in TPU, PETG or ABS

Pobrania
46
Polubienia
4
Ocena
0
P
PrintablesStone Designs

Maximum Desk Organizer for a 220x220 Printer

This organizer has two options one that is exactly 220 and one that is a 1mm smaller on 2 sides for printer that refuse to print the full size. Features: Top left scissor slot. Standard size sticky notes slot with a snug fit in the square…

Pobrania
45
Polubienia
11
Ocena
0
P
PrintablesValvetVipe

Eachine Wizard X220 GPS and Antenna TPU Mount

Not for X220s. If you are interested in a version for the X220s you can contact me. I attached the gps module with 3m double-sided adhesive tape. but you can also use a cable tie (2.5mm). Layer height 0.2 - 0.32 TPU 95A

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesRD3D_PRINTWERKZ

reinforced distressed vornai skadis board panel 220x220x5.1

Give your IKEA SKÅDIS wall system a modern, designer look with this fully custom distressed reinforced Voronoi panel , sized to perfectly match the original 220×220×5.1 mm SKÅDIS tile. Strengthened geometric lines + clean textured finish.…

Pobrania
41
Polubienia
10
Ocena
0
P
PrintablesConcealed45

Kusarigama pated for 220x220 printer

everything split down the center for no support printing, use cuts of filament in locating holes and glue together. need 50 of the chain halves Category: Costume

Pobrania
41
Polubienia
9
Ocena
0
P
PrintablesFyodor321

220x220x250 Giant Cube Challenge

This is 220x220x250 Giant Cube Challenge for all Creality Ender 3 printers. You can flex on anybody that you printed a giant cube! Would take about 3 to 5 days depending on printing speed.

Pobrania
40
Polubienia
1
Ocena
0
P
PrintablesNillerk

Princess Leia Hueforge 220x220

Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings in framed and unframed versions. Print at 100% infill with a layer height of 0.04mm with a base…

Pobrania
40
Polubienia
12
Ocena
0
P
PrintablesSkyline989

Eachine Wizard X220S Frame Protection

Print in TPU or PETG for best protection

Pobrania
40
Polubienia
4
Ocena
0
P
PrintablesWoodbeard

8x8 Arrow Stand 220x220x82mm | Pfeilständer

(Google translated) The arrow stand is 220x200x82mm, for 8x8 arrows (64). The holes get larger and larger, from 6.7mm, 7.7mm and 8.6mm. Fits my ID 4.2, 5.2, 6.2 carbon arrows from min.1000 to 500 spine. The distance between the holes is…

Pobrania
39
Polubienia
5
Ocena
0
P
PrintablesLoading

Eachine x220 v2 gopro mount

A camera mount designed for Eachine x220 v2 fpv drone

Pobrania
38
Polubienia
3
Ocena
0
P
PrintablesPlasma Neo

Level Test for Ender 3 Series (220x220 build volume)

The perfect level test for most ender 3 series and other 220x220 build volume printers Intended for 0.2mm layer height (if using a purge line you should have to shrink its width)

Pobrania
37
Polubienia
2
Ocena
0
P
PrintablesWatchdog1977

4x4 gridfinity box shelf for (220x220 build size)

4x4 shelf for the 4x4 gridfinity boxes. set in 4 parts. 3 shelves and top, remove sections you dont need orientation is good as is. Only print either 1 base or top at a time. no supports needed. I use 2 walls and comes out great. use the…

Pobrania
36
Polubienia
8
Ocena
0
P
PrintablesAviator

Eachine Wizard X220s GPS Mount

Designed for a BN-220 GPS.Need new Screws M3 x 16mm

Pobrania
35
Polubienia
0
Ocena
0
P
Printablesguserav

Fixation template and brackets for ex2200-12C

This is a small 2 part model to mount an Juniper ex2200-12C under a desk. This model utilizes screws to fixate the switch. The triangle part is just for easier mounting as the screws are already spaced correctly. As this is an under table…

Pobrania
34
Polubienia
1
Ocena
0
P
PrintablesSkyline989

Eachine Wizard X220S Arm Protection

Print in TPU or PETG, replaces the LEDs

Pobrania
32
Polubienia
8
Ocena
0
P
PrintablesSkyline989

Eachine Wizard X220S GoPro Hero 5/6/7 Mount

Full Protection, 10, 15, 20 and 25deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws

Pobrania
31
Polubienia
4
Ocena
5
P
PrintablesDanny33

modular workshop organiser - box internal dimensions 235x120x220mm

"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesDanny33

modular workshop organiser - Box internal dimensions 217x173x220mm

"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…

Pobrania
28
Polubienia
4
Ocena
0
P
Printableseried

Wizard X220s camera mount for Action camera

Same as the original rubber mount, but adapted for a typical chinese action camera. Print instructions 50% infill makes the mount strong but lighter than the original. Print with flexible filament.

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesLucasa77

Flower Tagholder: six on 220x220 surface

Very simple pot or garden tagholder. 6 fits on 220x220 print surface (like my Kobra Go) PETG prints raccomended if used outside.

Pobrania
27
Polubienia
0
Ocena
0
P
Printableschouchou

Juniper EX2200C-12P Stand

Vertical stand for EX2200C-12P

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesGustawXYZ

Eachine Wizard x220 RunCam Micro Eagle camera mount

It's pretty tight on Wizard x220,but fits. I attached a .blend file so feel free to widen it a bit if needed. You might need a brim, but I did it without and worked great on Creality Glass Bed. My setup: 0.4mm nozzle, 0.2mm layer height,…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesDanny33

modular workshop organiser - box internal dimensions 185x174x220mm

"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…

Pobrania
26
Polubienia
1
Ocena
0
P
Printablesune

Sort base for Ultimate router jig (fits on 220x220mm beds)

A shorter base for the Ultimate router jig. Allows printing on 220x220mm Print-beds.

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesFert2711

honeycomb spool 220x220

it's a honeycomb spool

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesTrash Tomeck

Tomeck's 36 zone 220x220mm bed level quick calibration test net v1

Quick calibration test net for bed level check. One layer - 0.2mm layer height.

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesCool

Gorilla quick release plate for Sony WX220 Camera with tripod screw (Gorilla Schnellwechselplatte mit Stativschraube für Sony WX220 Kamera)

Gorilla Schnellwechselplatte mit Stativschraube für Sony WX220 Kamera Projektbeschreibung und Anleitung unter http://cool-web.de/3d-druck/gorilla-tripod-schnellverschluss-platte-kamera-smartphone.htm Video unter…

Pobrania
23
Polubienia
3
Ocena
0
P
Printableseried

Wizard X220s Camera Guard (another)

A slighty modified (improved IMHO :P) guard for the x220s camera. Print instructions Category: R/C Vehicles Summary A slighty modified (improved IMHO :P) guard for the x220s camera.

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesFlasheek

Eachine Wizard X220HV Arm Guard

A simple, lightweight, snug snap-fit guard for arms and motors for Eachine Wizard X220HV. Designed to be very easy to print with TPU plastic. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…

Pobrania
21
Polubienia
4
Ocena
0
P
Printablesdnshlk

3 Slot Print in Place Watch Box 220x220 Printers Allowed

Added 17cm wrist holders, that was remixed from few model, not only original listing.

Pobrania
20
Polubienia
5
Ocena
0
P
PrintablesKotei Koteevich

Fire Goat 2027 #1 140x220 Hueforge

The painting “Fire Goat 2027 #1” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…

Pobrania
20
Polubienia
7
Ocena
0

220x220 Buildplates stand

Stand for 220x220mm buildplates. x1 4mm glass x3 1.5mm thick steel or soft magnetic PEI, PET etc. There are two versions with or without hex pattern.

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesSkyline989

Eachine Wizard X220S Gopro Hero3 Hero4 Mount

Full Protection, about 30 grams. 10, 20 and 30deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws Update 16/4/20 added 15deg Version

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesSkyline989

Eachine Wizard X220S Gopro Session - Runcam 5 -Foxeer Box - Caddx Orca Dophin (for TBS ND Filter)

Print in TPU use TBS ND Filters: (https://s.click.aliexpress.com/e/_9ROQbh)

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesYeen621

HDD Cover & USB-C charger for Thinkpad X230 X230i X230T X220 X220i X220T

I modified the cover to accept two different types of USB-C chargers to make my ThinkPad tablet PC more versatile. I have also made a label for it as a .PDF on an A4 Page. Quick Info: This will only work or only make sense if you're not…

Pobrania
18
Polubienia
5
Ocena
0
P
PrintablesAisuNi

heatbed strain releif for generic 220x220

I'm making a 3d print print w/ all the random parts i have left over and wanted strain relief for this 12v 220x220mm heated bed i pulled off an old am8 and could only find ones for the connector types, so i made one for mine w/ the…

Pobrania
18
Polubienia
6
Ocena
0
P
PrintablesLucasfrit

Adjustable Rumcam 2 mount for Wizard X220

It is an adjustable Runcam 2 mount for the Eachine Wizard x220. Print Settings Material TPU Infill: 50%

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesZoid

Eachine Wizard x220 stump antenna

The rear end for Eachine Wizard x220 upgraded with TBS Unify and stump antenna. Cut off the end of the top plate is required. Print instructions Printed in XT-CF20 by Collorfabb with installed hardener nozzle E3D 0.4.

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesDamnDan

Sony Bluetooth headphones MDR-ZX220BT tech covers/charms

Covers I made to spruce up my boring MDR-ZX220BT headphones. Used double sided tape to glue those onto my headphones - just to keep it reversible. Printed with PLA on Ender 3v2. 0.2 resolution 100% infill 1 wall

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesAlexandre M.

Lotus S2 Elise/Exige VX220 Side Repeater clip

The retaining clip of my S2 Lotus side repeater lamp broke off. I didn't want to wait or to pay more in shipping than the price of this repeater. So, I design this clip that slides over the broken one and that is hold in place by the bulb…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesVlada Matena

55x220 mm air pipe 45 deg. elbow

Printed from PETG at 0.2 mm layer height. Heated chamber recommended.

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesValvetVipe

GoPro Mount für Eachine Wizard X220

TPU for flexible, shock-absorbing properties or PETG for a stiffer assembly.

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesDonnie

Custom Anet A8, Prusa Mk2S Y Carriage 220x220x5mm

Custom Anet A8, Prusa Mk2S Y Carriage 220x220x5mm

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesSzaman

iFlight XL5 / EX220 GoPro Session pod 45 degrees

iFlight XL5 / EX220 GoPro Session pod

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesBB Brain

Eachine Wizard X220 DJI O3 Air

A cam mount for a Dji O3 Air Unit on the Eachine Wizard X220 some tape is necessary to sunk it up on the post Print Settings Printer Brand: Anycubic Printer: Kossel **Rafts:** Yes Supports: Yes **Infill:** 70% Category: Parts

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesValvetVipe

Eachine Wizard X220 XT60 TPU Mount

Layer height 0,2 - 0,32 TPU 95A.

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesArdutroniques

Modification Eachine Wizard X220s

Ce modèle est divisé en deux parties : Un conduit pour le câble XT60 qui évite que le câble parte dans les hélices et s'abime.(PETG conseillé pour plus de résistance aux crashs Une butée pour éviter que la LiPo ne glisse et tombe du drone…

Pobrania
13
Polubienia
5
Ocena
0
P
PrintablesCFMP

Kit réparation phares Opel Speedster VX220

Kit de réparation pour phares Opel Speedster a coller ou a visser en fonction de la version choisie. Pour la colle, la Cyanolit ou préférence epoxy. Pour la version a visser il faut une vis M5 avec tête fraisée diam de la tête 7mm Prévoir…

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesFil_Big_G
Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesKotei Koteevich

Cat Neon City 140x220 Hueforge

The painting “Cat Neon City” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesLoohney

Wizard X220 - Minimalistic ESC Cover

Minimalistic ESC Cover for your FPV Quad Print time is about 4 minutes. I've designed a minimalistic solution to keep the ESC's of your FPV Quad save from your props in a crash . The slits on the top will probably help to keep the ESC's…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesDiego Chaparro

ENDER3 S1 220X220X270

modelo de Ender 3 s1 con volumen de impresión 220x220x270 listo para usar de base en orca slicer tutorial rapido

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesTommy1972

Wizard X220s kabelholder

XT60 Holder to Eachine Wizard X220s Category: R/C Vehicles

Pobrania
10
Polubienia
2
Ocena
0
P
Printablescrazy.biker_84

Action cam mount for Reely X220 race copter

Actioncam mount for the Reely X220 race copter. Print Settings Printer: Renkforce RF2000 Rafts: Yes Supports: Doesn't Matter Resolution: 0.1 mm Infill: 25% Notes: I´ve printed this in PLA using 4 solid bottomlayers, 4 solid toplayers and…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesMattia Prandi

Foxeer Box 2 mount for WIZARD X220S (25°/30°)

Foxeer Box 2 mount for WIZARD X220S, if you want to edit this file there are Fusion 360 files

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesMattia Prandi

Propeller Tool Helper for Wizard X220s

This is a helpful tool for mount or dismount the propeller from Wizard X220S

Pobrania
9
Polubienia
2
Ocena
4
P
PrintablesKotei Koteevich

Holo (Spice and Wolf) 140x220 Hueforge

The painting “Holo (Spice and Wolf)” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100%…

Pobrania
9
Polubienia
3
Ocena
0
P
Printablesbpul

Stackable Containers by Bndzi REMIX 160x220mm

This is a REMIX of the Stackable Containers by Bndzi. It was resized to 160x220mm

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesTamás Kiss

Display Case for 3D Models – V2 (250x220mm)

Illuminated Display Case for 3D Models – V2 (250x220mm) This display case is designed for the aesthetic presentation of 3D printed figures, human models, and manga characters. Compared to version V1, the following modifications have been…

Pobrania
8
Polubienia
4
Ocena
0
P
PrintablesArdutroniques

Paroi Eachine Wizard X220s

J'utilise une stack Speedybee qui est plus grosse que la stack d'origine du Eachine. La paroi ne fonctionne donc pas, étant trop étroite. J'ai donc redessinés une partie de la paroi ,moins longue, mais qui protège les fils. Il faut…

Pobrania
7
Polubienia
2
Ocena
0