Wyniki wyszukiwania: xchange

Sortowanie

124 modeli

P
Printablesgwg

PolyDryer Air Exchanger

Most 3d printing filament dryers have a fundamental flaw: they heat the filament and pass air over it, but they are a closed system with no venting, so moisture escapes only by accident. With single piece dryers, fixing this is intrusive…

Pobrania
2560
Polubienia
618
Ocena
4,97
P
Printablescbaoth

Custom Stamp with Exchangeable Text

And again a simple, customizable OpenSCAD design. This time it's a two component stamp, a generic handle part and an interchangeable rubber part; no gluing necessary, simply print one or more texts and switch them around as you like.…

Pobrania
942
Polubienia
220
Ocena
5
P
Printablesfamichu

Exchangeable desiccant case for the Sovol SH02

This is a desiccant case for the SH02. It can be used with silica gel larger than 1.5mm in diameter. NOTE: Please print it in 0.15mm layer height without supports. Added 1.0mm gap models too(January 20th , 2025)

Pobrania
787
Polubienia
102
Ocena
4,87
P
PrintablesMiniWorld3D

Old Stock Exchange Børsen - Copenhagen , Denmark

🇩🇰 Velkommen til Danmark Welcome to Denmark! ---------------- Update, April 16, 2024 - We are devastated from the news that a most unfortunate fire destroyed this building of such historical importance. We hope our model brings comfort…

Pobrania
580
Polubienia
87
Ocena
0
P
Printablesmcboeck

Makita Battery to Einhell PowerXChange Device

A stable and easy to print adapter to use your Makita batteries with Einhell PowerXChange tools. Fit is pretty thight but not sticking. Included the supports for the Makita locking in the drawing to save supportmaterial. Simply remove it…

Pobrania
483
Polubienia
51
Ocena
0
P
PrintablesPvtDBJackson

EAB (Exchange-A-Blade) Folding Utility Knife

Folding utility knife. Liner locking design. Takes standard utility knife/razor blades. When you blade goes dull, don't sharpen it, exchange it! Requires one M3 x 10mm screw. Prints as one assembly with built-in supports. Print Settings…

Pobrania
291
Polubienia
65
Ocena
4,67
P
Printablesgabindu

Miniature painting holder with exchangeable screw-on top

This is a remix of Gaba Ghoul's great painting holder, but with printable screw-on-top exchangeable bases, so you can switch between several minis without ever touching them. Sources This was inspired by…

Pobrania
276
Polubienia
37
Ocena
5
P
PrintablesSM Prints

White Elephant Gift Exchange Trophy

We wanted to give an award for best white elephant gift at our white elephant gift exchange this year. Just used a little super glue to attach the elephant to the base.

Pobrania
256
Polubienia
40
Ocena
0
P
PrintablesJoshCraft3D

Heat Exchanger Channel Desk Pen Holder

Designed this for desk at work. It is designed after an A-Type Heat Exchanger Channel. The Filler Files slide into the pass partitions. You can scale them to allow longer or shorter items to fit into the pass partitions. I Assembled parts…

Pobrania
251
Polubienia
46
Ocena
5
P
PrintablesJoshCraft3D

Heat Exchanger Bundle Business Card Holder

This is a bundle from a Heat Exchanger I am working on. I modified it for the Business Card display contest, but was too late. I have included a picture with locations of where I recommend putting supports. In my pictures you can see I…

Pobrania
239
Polubienia
32
Ocena
5
P
Printablesross549

Polydryer 10% Air Exchanger Upgraded

Introduction I liked the air exchanger model from user gwg, but I thought I would be able to make some changes. I hope you find them useful. The top has been changed to a solid peice, and you must use a modifier to use hexagonal infill to…

Pobrania
233
Polubienia
34
Ocena
5
P
PrintablesSteveW91

Nozzle Exchange Stand for Sprite Extruder

Stand your extruder upside-down with this, to aid in the exchange of the nozzle.

Pobrania
205
Polubienia
64
Ocena
5
P
PrintablesSuppe12

Skadis Holder for Einhell PowerXChange 3A Charger

A very simple to print holder for the Einhell PowerXChange 3A Battery charger on Skadis Pegboard. No Supports needed. A bit difficult to mount on Skadis but holds perfectly. Print the hook two times

Pobrania
204
Polubienia
25
Ocena
3,5
P
PrintablesKane

Heat Exchanger Core

A barebones heat exchanger core for air cooling and heating projects. Default size is 186x186x180mm. I haven't printed the bare exchanger, but successfully printed the pattern using carbon fiber filament inside 6in cylindrical ducting.…

Pobrania
165
Polubienia
13
Ocena
0
P
PrintablesMagnumDanger

Miniature Terrain - Port Themisto - Asteria Exchange

I've gotten tired of gothic terrain and wanted something different. I'm using for Battletech but ruleset agnostic. I'll continue to put more models out in the line. Prints fine without any supports. Prints as one file or split into two…

Pobrania
161
Polubienia
29
Ocena
0
P
PrintablesHoroTW

SKADIS Holder for Einhell PowerXChange - Power X-Charger 3A Charger

If it fit is too tight or not tight enough, you can always use a lighter/torch to soften the print and make it fit - but I wanted a "standard" fit ^^.

Pobrania
150
Polubienia
23
Ocena
0
P
PrintablesFightclub68

Skadis Universal Einhell PowerXChange Charger

The ultimate skadis mount for your Einhell PXC charger. In contrast to other models it uses the universal hooks of CSD_Salzburg and they are placed quite at the top, which allows to take the holder down without needing to break anything.…

Pobrania
140
Polubienia
13
Ocena
5
P
PrintablesFlashL

DIY Water to water heat exchanger

Liquid heat exchanger I need to cool down a bunch of instruments and our laboratory has a primary cooling water circuit. Yet it is dirty and the pressure difference between the supply and return line is too low. In order to decouple my…

Pobrania
135
Polubienia
237
Ocena
0
P
Printables😀 Willy

Bambulab CapHolder Hotend Exchange X1C

A small fixture to fix the Cover during the exchange of the HotEnd - No more annyoing during change of noozle And also put no stress on smd plugs, cables pins, .. Easy to print , need only 2 M4 bolt, fixing is done by Slot and magnet It s…

Pobrania
134
Polubienia
39
Ocena
5
P
Printables3DP-MAMSIH

Prusa Mk3s Rapid tool Xchange

Xchange from printermods.com This is MOD for prusa MK3s 3d printer which allows to quick change the tool-head and can be useful to multiple tool heads with differant nozzles etc. for wiring following the wiring diagram from printer mods…

Pobrania
128
Polubienia
65
Ocena
0
P
PrintablesKane

Heat Exchanger for 6in Ducting

This is a heat exchanger for 6in ducting. As an example, I used it to temper incoming makeup air for a basement kitchen hood's exhaust. I printed using carbon fiber reinforced PLA. I don't have the equipment or knowledge to test the…

Pobrania
123
Polubienia
39
Ocena
5
P
PrintablesGaius Pupus

Sunlu S2 airflow optimizer & active humidity exchange

you can find here the detailed description. this version requires more intervention, but is fully integrated and actively exchanges the moist air with the ambient air. I remixed “ Sunlu S2 base with ventilation ” to have an seperate and…

Pobrania
122
Polubienia
37
Ocena
5
P
PrintablesTMTYL

Dead Blow Hammer with exchangeable TPU faces

Small Dead Blow Hammer for model building, etc… The TPU faces can easily be put on / switched out. The handle screws on. Handle size: 125mm Hammerhead size with faces put on: 80mm Printing tips: Print the faces in TPU, 100% infill (I used…

Pobrania
96
Polubienia
27
Ocena
4,6
P
PrintablesMartin Anzinger

Enervent Ventilator Heatexchange Pulley

For my Living Room Ventillation from Envervent the Pulley for the Heatexchange broke. I printed it with PETG 0.4 Nozzle 0.2 Layer 30% Infill 4 Perimeters on my Mk3s+

Pobrania
96
Polubienia
8
Ocena
0
P
PrintablesJR

Quick Print Valentine Bookmark - Perfect for Classroom Exchanges

Introduction My primary school child needed something for the class Valentine exchange. We didn't want to go with candy or the typical ‘supermarket’ boxed cards. My child is constantly searching for a bookmark, so I decided to create a…

Pobrania
85
Polubienia
15
Ocena
5
P
Printablesfirstgizmo

Heat exchanger model

It is a smal part to fit in for design reasons. Print all parts in the given orientation (or as you see fit) No support needed. The big gap in the Base part works with a bridge. If you add a manual color change to the Radiator part, one…

Pobrania
83
Polubienia
10
Ocena
5
P
Printablesdoomsey

Exchange-A-Blade remix

I liked the idea of the EAB knife I remixed, but as a print-in-place design the tolerances were pretty floppy. So I ended up redesigning the mechanism and making a few other minor changes while I was at it. I went to a non-print-in-place…

Pobrania
79
Polubienia
11
Ocena
5
P
PrintablesTwotone74

Foldable Arm Extension with exchangeable toolhead

Since I'm driving a van, I've often had the problem that I can't reach easily machines at barriers or toll stations. They are often too low because they are made for normal cars. Sometimes there is also a higher control panel for trucks,…

Pobrania
74
Polubienia
27
Ocena
0
P
PrintablesPeter

RPi Camera V2 with Articulating Arm and exchangeable lenses.

Newly designed articulating arm for Raspberry Pi camera V2 module, inspired on existing designs but fully remixed for the purpose. Fits the original MK2 and MK3S Prusa printers. Arm with 4 degrees of freedom, for perfect positioning and 4…

Pobrania
73
Polubienia
9
Ocena
5
P
PrintablesMonster King

heat exchanger

hceat exchanger ready to print file

Pobrania
72
Polubienia
6
Ocena
0
P
PrintablesCoreAxisDesigns

The Trilock...... A Tripod with exchangeable twist lock mounts

This is a tripod system that has twist-lock mounts to suit many applications. I currently have a case/mount for the Arducam CS mount camera , and in the future will add other camera mounts. Also different mounts with a ball joint, gopro,…

Pobrania
71
Polubienia
10
Ocena
5
P
PrintablesSwan_Kikaku

Ball-Exchange Tile for Gravitrax

This is a GraviTrax tile designed to push out a pre-placed ball using the momentum of an incoming ball. The tile has a 10mm slope, and the incoming ball enters from the higher end. Apparently, the speed of the incoming ball is important.…

Pobrania
68
Polubienia
11
Ocena
5
P
PrintablesLord_Vader

Nerf Rampage Barrel Holder Exchangeable

Made this Barrelend/Holder for scientific purpose! I will test different kinds of barrels for the rampage! Just in case someone needs this... Needs 2 spare screws (the ones from the case) or just tap M3 into it if you like. Edit: Seems a…

Pobrania
60
Polubienia
5
Ocena
5
P
PrintablesAndrew Bashore

ADSBExchange SDR Mount

Wall mount to hold two ADSBExchange SDRs (Blue & Orange). I built this to clean up the wiring for my ADS-B feeder in the garage. These SDRs can get warm, so I printed this out of ABS. We are moving into winter now so cooling isn't an…

Pobrania
58
Polubienia
13
Ocena
5
P
PrintablesAnatolii

AntiCovid mask with exchangeable filters

My design for AntiCovid mask with exchangeable paper filters Print instructions Anticovid-19 3D printable respirator The respirator is supposed to be use for individual protection of healthy people. Do not use a respirator for patients…

Pobrania
56
Polubienia
8
Ocena
0
P
PrintablesMr. MegaTronic

BTN-1000 Desktop Thermoelectric Heat Exchanger

My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J\_TeOsF4M\_F5pPPJQ Hey! It's getting hot! Do you have one of those cheap-o mini-fridges that plug in to your car's power socket and keep all of one can of soda moderately…

Pobrania
56
Polubienia
17
Ocena
0
P
PrintablesDBOA

Customizable Exchangeable Hanko Stamp

It's the same fit as https://www.printables.com/model/302219-customisable-stamp-seal-stamp. There you can find a blank stamp to add your own hanko seal. The base model has a ~21mm size and the seal itself shoud be the size you want, matbe…

Pobrania
56
Polubienia
6
Ocena
0
P
PrintablesTritschi

Infill Sampler with exchangeable Infill Testprints

Often I found out that my choice of infill style and infill percentage was not best. Now I can print my infill samples (30x30x5mm), just leave the top layer = 0. I added a lot of grid patterns: 1 only, 2x1 grid, 3x4 grid, 4x4 grid and 4x5…

Pobrania
54
Polubienia
16
Ocena
0
P
Printablesk-eye

Minifigure with hat (exchangeable)

Here you can find 3 Minifigures. You can exchange the hats. Print instructions Category: Toys & Games Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: No Supports: No Resolution: 0,2 Infill: 10%

Pobrania
51
Polubienia
6
Ocena
0
P
PrintablesPlatonicsolid

Bentusi Exchange

Modified version of Zacbond 's Bentusi Exchange for large scale printing. I've made two changes here: Resized to be in-scale to the Kushan Mothership. Split into sections for easier printing. Joiners included, everything should…

Pobrania
50
Polubienia
11
Ocena
0
P
PrintablesTeachingTech

XChange custom parts - BTT H2 / Omniadrop V2.1 / BLtouch / cable management

UPDATED: All of my XCHANGE parts are now included, STL and STEP. Wire cover: attaches to the master side and provides cable tie locations to keep the loom back to the mainboard tidy. ABL plate (Ender 3): This sandwiches in between the…

Pobrania
49
Polubienia
10
Ocena
0
P
PrintablesTeachingTech

Paste extruder to suit XChange

An open source paste extruder, designed to suit the XChange tool plate from printermods.com, but can be mounted on any machine using a square 31mm pattern. Uses a cheap, easy to find 80ml syringe:…

Pobrania
49
Polubienia
23
Ocena
0
P
PrintablesNg Yu Fei

Super Basic Heat Exchanger Cross Section

Printed in PLA with gyroid facing downwards on print bed, no supports required.

Pobrania
49
Polubienia
4
Ocena
0
P
PrintablesArsen

Exchangeable buttons with hiding place

structure : The button consists of two parts: the base that is sewn onto the dress and the cover that is screwed onto the base. Attention : screw the cover to the base only after sewing the base to the dress, otherwise you risk not to be…

Pobrania
48
Polubienia
20
Ocena
0
P
PrintablesTeachingTech

Freestanding / XChange dial gauge mount

A double mounting system for a dial gauge for 3D printer calibration. The brand of the dial gauge is unknown but the mounting surfaces are 13.8mm external diameter. One mount is meant to slide onto a 12mm rod, and the other is designed to…

Pobrania
47
Polubienia
11
Ocena
0
P
PrintablesGQRuss

Heat exchanger

Heat exchanger

Pobrania
46
Polubienia
5
Ocena
0
P
PrintablesRPK

Stamp with exchangeable plate motif "flat ist boring"

EN: The stamp is designed so that the stamp plate on the stamp foot can be exchanged. This means that different motifs can be stamped with the same stamp handle. (PLA, Prusament mystic brown). The recesses visible from the front and side…

Pobrania
44
Polubienia
7
Ocena
0
P

refrigerator heat exchanger 80mm fan holder

Summary This fan holder is suitable for standard 80 mm PC fans. It allows you to click the fans into place on your refrigerator's heat exchanger. Thanks to the improved cooling, the compressor runs for less time to maintain the…

Pobrania
42
Polubienia
5
Ocena
0
P
PrintablesBear Creek 3D

Mount for Gerber EAB (Exchange-A-Blade) Folding Utility Knives

Mount for Gerber EAB (Exchange-a-Blade) folding utility knife. Fits both Original and Lite versions of the Gerber EAB knives. https://www.amazon.com/dp/B002RILCLY/ Includes slot for integrated 6x20x2mm magnet (optional) to retain the…

Pobrania
42
Polubienia
5
Ocena
0
P
PrintablesFlorin Balazs

Gridfinity storage box for K1 nozzles and exchange tools

Storage box for the original tools that arrive with the K1 printer. The box has the basig grid from gridfinity (no magnets) and is stackable. I divided the nozzle storage space into 5 areas and left a flat surface so you can add a sticker…

Pobrania
40
Polubienia
9
Ocena
0
P
PrintablesFlapstaart

Xchange permanent BL-Touch & ADXL345

What This remix adds a mount for an ADXL345 accelerometer to the permanent BL-touch mount. If you already have a permanent mount and cabling for a BL-Touch, might as well throw in an ADXL345! Requirements 1x base abl_plate from the…

Pobrania
38
Polubienia
5
Ocena
0
P
PrintablesLucid

Mycology Free Air Exchange Port

This is used to add passive air exchange for use with mycology grow boxes. Standard cotton rounds are used for inserts, and they can be replaced safely and effectively, even when the cotton rounds become wet. Ideally, mushrooms require…

Pobrania
37
Polubienia
6
Ocena
0
P
Printablesnekreg9

Exchangeable desiccant case for the Sovol SH02 - Solid sides

I made the bottom and sides solid instead of vented. Used the original lid

Pobrania
37
Polubienia
1
Ocena
0
P
PrintablesBVer

PrinterMods Xchange Alignment Pin

Alignment pin for the PrinterMods Xchange. Intended as a replacement, just as fragile as the original. Designed to be printed with a resin printer, 0.05 mm layer height. Supports probably needed (see chitubox image or file for…

Pobrania
36
Polubienia
3
Ocena
0
P
Printableseponra

Curtainhook with exchangeable attachments

I needed a quick fix for our old bedroom were right now renovating. So i designed a hook in Fusion 360, together with a pin system so it doesnt rotate with only one screw. (You basically drill a 3mm diameter hole right next to the hole…

Pobrania
36
Polubienia
12
Ocena
0
P
PrintablesCutterSlade

Quick print Customized Heat exchanger V2.1

Customized version of https://www.thingiverse.com/thing:1919974 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1919974 Instructions Using the following options: pipe_inner_diameter = 8…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesLukas G

Memory game exchangeable

My teacher wife wanted to have a memory game for the kids which she can reuse with customizable paper prints. Thats what came out. The paper square must be a maximum of 4.8 x 4.8 cm. Maybe a bit smaller due to tolerances. On my MK4 it…

Pobrania
34
Polubienia
5
Ocena
5
P
PrintablesJanusz

Samsung dv80t5220ae tumble dryer additional filter for heat exchanger

My dryer stopped drying after four years. After cleaning it, I decided to do something about it so I wouldn't have to go through this again. I couldn't find anything interesting in the pre-made models, so I designed my own attachment for…

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesKrummrey

OpenPressPrintExchange Frames

The prints from the OpenPress Print Exchange are 7x7 cm. Hard to find frames that fit. OpenPress never published the files for their frame design. I remade theirs and a second “floating” style frame. That one comes with an inlay to give…

Pobrania
33
Polubienia
10
Ocena
0
P
PrintablesBVer

Xchange BLtouch mount

BL touch mount for the Printermods XChange. Attaches the BL touch to the base plate, so you won't need a BL touch for every toolplate. A wide and a small version are available. Printed with ASA+, 0.1 mm layer height and supports needed.…

Pobrania
32
Polubienia
0
Ocena
0
P
PrintablesSoCalSteve

RoboRally Board: Exchanger

I have often thought a fully automated version of RoboRally would be incredible. This is my first step on that path. I have converted the six boards from the 1995 version of the game into a static board. This is broken into four 6"x6"…

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesRPK

Stamp with exchangeable plate, Motif Smiley 2c

EN: For Stamphandle, Box and instructions see: Motifs : smiley-2b smiley-2a smiley-1 flat-ist-borin Stamphandle: Stamphandle Box : Box Material : FLEX, (TPU) 85A Layers : 0.2mm Infill : 100% Supports : no…

Pobrania
28
Polubienia
6
Ocena
0
P
Printablesmrfox

Realistic miniature plate heat exchanger

This file set lets you build a bite‑sized version of an industrial plate heat exchanger—ideal for classroom demos, scale‑model process plants, or just nerdy desk décor. The design has two end covers which clamp a stack of corrugated…

Pobrania
27
Polubienia
6
Ocena
0
P
PrintablesKovs

Ender 3 Creality Laser Xchange Plate

I have the Creality laser for my Ender 3 but wanted to have its own dedicated XChange plate for it. So, i created this adapter plate for it

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesBoris Böhlen

XP PEN Deco 01 V2 Key Labels (exchangeable + updated)

Needed something to label the keys for my XP PEN Deco 01 V2 as I tend to forget what's on what key across different programs. The labels can be replaced by different stripes. Buttons can be replaced from top. Thus, you can use…

Pobrania
27
Polubienia
6
Ocena
0
P
Printablesshort3110

Einhell Power xchange wall mount

All my tools should be well organized on a wall. Damit alle meine Werkzeuge schön und “LEAN” an die Wand kommen.

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesNatOs

Picture Frame for Open Press Project Print Exchange art 7x7 cm frame 10x10 cm

I created this frame for my Open Print Exchange Prints. They are 7x7 cm. The Open Press Project had an own Frame but I can't find it any more to link it. By the time I created the frame (Oct-23) there were not available frames. Open Print…

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesIchooorrr

Exchangeable Printbed Scraper with plastic card

Printbed Scraper that uses a 85x54mm plastic card. The plastic card can be replaced without tools and both sides can be used. The advantage is that the plastic card is harder then printed structures but soft enough to make sure there is…

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesTunantero

Air filter / gas exchange for mushroom fruiting bags.

It's a small plug to fill with polyfill and insert into the mushroom bags for fruiting. (Not for colonization.) I know most people use bags with built-in filters or pierce their bags with a needle, and this plug crosses the line into…

Pobrania
25
Polubienia
8
Ocena
0
P
PrintablesStefan Kellner

Computer and Powerbox Plate for Telescopes, easy to exchange

I'm using a Mele Quieter PC and the Pegasus Astro Powerbox Micro on different scopes: a Celestron Edgehd 8, a TS Optiocs CF Apo 90mm and a Lunt LS60Tha/B1200/CPT. I wanted a solution to quickly switch the computer to a different rig. I…

Pobrania
25
Polubienia
1
Ocena
0
P
PrintablesNick__Furry

Einhell 18V power xchange protean stock

Use an einhell 18v battery for your blaster, all you need are 2 15 by 30mm sheets of metal to fit securely on the contacts, brass is better because it is easy to solder on, but anything conductive should work, fit them on the center…

Pobrania
22
Polubienia
9
Ocena
0
P
Printableslklse

Buffer exchange/Affinity chromatography rack

Our lab only had one rack suitable for small protein purification and buffer exchange columns, so I had to come up with a solution. The openings are designed to accommodate, for example, Cytiva Miditrap or 5 mL gravity flow chromatography…

Pobrania
22
Polubienia
4
Ocena
0
P
PrintablesKayayksl

Heat exchanger

Layer height : 0.2mm Supports: Yes I am using esun PLA+ and it prints well

Pobrania
21
Polubienia
0
Ocena
0
P
PrintablesMacNite

Alphacool Eisbaer Solo Mount and Heat Exchanger for Water Cooled Hotends

This is the water cooling setup I use in my CorEssentials BETA for the E3D Chimera Aqua. Obviously this will fit most other printers. You can find out more about the machine on GITHUB: https://github.com/MacNite/CorEssentials To built…

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesCrank

XChange Tool Plate for Hemera XS

This is a modified XChange tool plate with repositioned mounting holes to accommodate the new E3D Hemera XS. Print at .12-.15 layer height for maximum layers in the thin sections. Mounting pin holes will need to be tapped. I also…

Pobrania
21
Polubienia
0
Ocena
0
P
PrintablesKnotcmptlecnfsd

SecKit SK Tank parts to mount XChange v1.0 Quick Change w/optional Euclid Probe

This model has a modified master plate to allow SK-Tank belts to be attached. The plate has holes at bottom right to connect a mount for the Euclid probe. The holes for the probe mount are sized for two M3 thread inserts (optional) The…

Pobrania
19
Polubienia
2
Ocena
0
P
Printablesaplayz

ADSB Tracker for Flightradar24, Flightaware, ADSBExchange for Pi Zero

This is a case for a RaspberryPi Zero W or Zero 2W and an RTL2832/R820T2 Stick. It is used as an ADSB Tracker for Flightradar24, Flightaware, ADSBExchange. To make it as small as possible, you will have to take the Stick out of the…

Pobrania
19
Polubienia
1
Ocena
0
P
Printableszcohen

XChange Tool Holder

EDIT: I realized my design only worked in a horizontal direction and not a vertical one. I therefore redesigned it to work vertically, have a bit more friction, and minimize the amount of material needed. This is designed to hold your…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesNick__Furry

Einhell power xchange Shop light

the head of the lamp probably wont be that useful to you since you would need the same heatsink, but i had several requests for the mount for einhell batteries all you need for the connection are 2 15*30mm brass sheets (or any other…

Pobrania
18
Polubienia
5
Ocena
0

Gift exchange game die

roll the die for a fun way to do white elephant

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesBruce3D

Exchange 106 TRX Kuala Lumpur | 200mm FDM

A 200 mm FDM miniature of The Exchange 106 at Tun Razak Exchange (TRX), Kuala Lumpur. This one-piece model captures the tapering tower, distinctive diamond-patterned crown and recessed window grid, together with a connected podium and…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesIDazI

Sovol 40W laser head bracket for Xchange

Got the Sovol 40w laser head for use with the Xchange and wanted to mount it. With a static BL Touch mount (that stays on the printer with the electrics). Please see my other makes. Mounting the laser straight to the tool changer it sat…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesIDazI

Xchange Back plate for BL Touch users

I downloaded Teaching Tech's backplate for the BL Touch but after printing and installing I found that the X Axis limit switch was not engaging. I went about changing the limit switch cover but with testing I had found that it was the…

Pobrania
18
Polubienia
2
Ocena
0

Exchangeable Coasters

The coaster consists of two parts, the base and an exchangeable plate with text on it. The plate can either be printed in with color change at font height or be painted afterwards.

Pobrania
18
Polubienia
5
Ocena
0
P
Printableshcm3

Printermods XChange ABL Plate Adapter

Teachingtech's ABL mount for the Printermods XChange system works pretty well, but it only triggers the X axis limit switch if you have the X carriage mounted to a linear rail. I added a “flag” to the lower left of the ABL mount to…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesHerrFrodo

Crown with exchangeable Tags

Be the king of whatever you want to be... With this crown! This crown comes with a slot for a tag where you can insert a piece of paper, to become whatever king you want. Originally designed this for a friend of mine but thought you might…

Pobrania
17
Polubienia
5
Ocena
0
P
Printablesbvogl

Lancia Beta Heat Exchanger Box Control Arm Holder

This part is prone to break on all Lancia Betas the white one) This specific one is modeled for the first series. You may need to slightly adapt the narrower part for fit with a file as the available space is very limited.

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesBVer

Printermods Xchange toolstand

Toolstand for the Printermod Xchange toolheads

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesLukashinator

Zen Rake with exchangeable rake top

Zen Rake with exchangeable rake top

Pobrania
16
Polubienia
6
Ocena
0
P
PrintablesKimframes

Soap holder with exchangeable bottom

Soap holder with exchangeable bottom. Bottom has a diameter of 113.6mm and 3mm height, in case you want to make your own

Pobrania
15
Polubienia
6
Ocena
0
P
PrintablesR B

Valentines Exchange Card

Insert Dum dum suckers into vase. for kids valentines exchange

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesEntropy_OCD

HOLD MY BRUSH! for Samsung Heat Exchanger brush

The Samsung tumbledryers equipped with a heatpump have a heat exchanger component that requires periodic cleaning. Samsung supplies a brush for this with a lovely suctioncup to attach it to things so you can be certain it comes falling…

Pobrania
15
Polubienia
0
Ocena
5
P
PrintablesRPK

Exchangeable stampplates organizer

EN: Box for 10 different stamp motifs. Material : Stamp handle: PLA, PETG Layers : Stamp handle: 0.3mm, 0.2mm as desired Supports : no Motifs : smiley-2c smiley-2b smiley-2a smiley-1 flat-ist-borin Stamphandle: Stamphandle…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesCaylorman

ADSBExchange Blue SDR mounting fixture

Underware/Multiboard-compatible mount for attaching the ADSBExchange Blue USB SDR dongle. Top clips helping to secure the dongle are spaced out wide enough that you can add a heat sink to the dongle if needed.

Pobrania
14
Polubienia
6
Ocena
0
P
PrintablesBW_workshop

Gift Exchange Dice for White Elephant

Thanks to https://www.thingiverse.com/thing:6332706 I was able to quickly create a slightly different version with some other types of actions. The rules for the game are that everyone starts off holding the wrapped present that they…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesCraig Marshall

XChange vertical post

A short/light/simple strain relief post for the (now defunct) PrinterMods.com Xchange carriage.

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesKen P

Riser set with 5% air exchanger

I need more height to closer match my filament sensor and gantry as it raised during the print. The 5% exchanger vent is to help humidity escape w/o great loss of heat (per original designer).

Pobrania
13
Polubienia
5
Ocena
0
P
PrintablesRPK

Stamp with exchangeable plate, Motif Smiley 2b

EN: For Stamphandle, box and instructions see: Motifs : smiley-2c smiley-2a smiley-1 flat-ist-borin Stamphandle: Stamphandle Box : Box Material : FLEX, (TPU) 85A Layers : 0.2mm Infill : 100% Supports : no…

Pobrania
13
Polubienia
4
Ocena
0
P
PrintablesFreman

CR-10S V2 Pro Microswiss HMG6 XChange Mods

What Remixed parts for my CR-10S Pro V2 based on the following: Hero Me Gen 6 Base ABL plate I haven't opted to use the remix button as I can only credit one design. Why By the time you put the full Hero Me adapter/base plate and squeeze…

Pobrania
13
Polubienia
3
Ocena
0

Worldbuilders Board Game - Exchange Sign

The game file for the exchange market sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.

Pobrania
12
Polubienia
1
Ocena
0