Liczymy pasujące modele…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…
In case you want to design a part that includes a tp4056 charge controller.
This model is compatible with the lego system.
A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…
printed with ankermake m5 in normal mode, 50% infill, support
Small case for the TP4056 charger with a window for the status LEDs.
User named Weylandyutani from Thingiverse created a simple wall mount for the LEGO 42056 Porsche GT3 RS. It clamps on a pretty strong point on the chassis (see the red arrow on the last picture). Depending on the hardware you'll use to…
A tight-fitting mesh for a Type-C USB 5V 1A 18650 TP4056 Lithium Battery Charger Drop it into your model and the component fits so snugly in the recess that you don't need anything else to keep it in place
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is a 2nd rendition of the mini paint palette to help nurture my 10-year old…
This is a Li-ion charger compatible with 18650 and 21700 cells. Charges up to 10 cells. requires a 5v power supply at least 10A. I recommend 15A to avoid overheating. Each cell has its independent charging module TP4056 or TC4056. The…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a charging holder for a single 18650 lithium ion battery. It uses the TP4056 charging board, that you can get easy on eBay. (Search for "lithium usb charger" or "TP4056") The battery contacts used are 10x10mm but you can use…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
This is work in progress next update will be adding an NTC for more safety. Edited 19-12-2022 : added a little how to and some Data, Features & Technical Specs After multiple prints and test I finally came with a design that I'm satisfied…
This model is compatible with the lego system.
This is a vase mode print I designed to hold 2 18650 cells as well as a TP4056 charge/protection circuit & MT3608 DC-DC boost circuit. Here's the link to where I bought the circuits from. https://a.aliexpress.com/_mNJGjrV 0.2mm layer…
Wip. Replacement for cabin filter cover Renault Laguna 3 52410566. Please notify me in the comments about inconsistencies. Print Settings Printer Brand: Tronxy Printer: Tronxy X5SA/X5ST/Pro/2E/D01 Plus Rafts: No Supports: Yes Resolution:…
My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…
Added strain relief feature to the original design. The case is longer to accommodate zip-tie, but it's pretty minimal (4mm longer). Need re-orientation, but can print without any supports. Printing filament: Original designer called for…
BASIC MODEL: TP4056 USB - C Lithium Charge Module
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2…
Tool holder for 12 pieces Combination Spanner Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 142mm W - 51,930mm H -…
designed mockup model of TP4056 USB-C charging module for representation in bigger assembly
About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…
This model is compatible with the lego system.
Simple TP4056 Housing. Created in FreeCAD. Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.
This model is compatible with the lego system.
Pretty simple print. I printed at 10% infill, .3mm layers with 2 perimeters. It's not a perfect fit, but it holds it great, and it doesn't cover any of the light. Hopefully this doesn't violate any IP rules-- I measured the lightbar and…
Why charge one 18650 when you can charge up to 4 at a time! It just takes 4x as long of course. This also has a slight extension on the space available for the 4056 circuit, as the original design didn't fit the ones I have (which have a…
Bližší informace o modelu na stránkách Lega nebo v aplikaci LEGO Builder. Zkompletováno z různých zdrojů na internetu, popřípadě navrženo ve FreeCadu.
A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…
For my flashlights 14500 battery I needed a charger fitting the protected version of a TP4056 because those I had laying around. So i grabbed the AA charger holder from enif and designed a holder for the charger board in Fusion360,…
Here's a Gridfinity 2x5 holder for the Klein Tools 34056 Hex Ferrule Crimper. I've also included a 2x5 5 bin Gridfinity for either standalone use or for use with the 5x4 Gridfinity Storage Box by Pred (…
Simple holder for charging 18650 batteries in original battery holder and TP4056. Be careful when pressing down the battery holder so that the cables doesn't get squeezed. The chip I use have the positive pad on the left side, please…
meshtastic heltec v2 battery case with two 18650 , back parte compatile with a famous heltec v3 case look like in photos
Do krabičky se zacvakne modul a zdířky zašroubují, vrchní krytka se zacvakne. Gcode je udělaný na všechny díly, tedy obsahuje oba dva typy krytu. Kryt bez dírky je pro kompletní uzavření, ten s dírkou je tam proto, aby bylo vidět dovnitř…
This is a replacement part for Saab 900s. This part is located at the bottom of the door card and helps secure it to the metal door. Outer diameter is 20.5mm with the inner diameter of 8.5 chamfered down to 5mm. The washer itself is 3mm…
I took the time to assemble the necessary parts for the Lego Star Destroyer 30056 using ChatGpt. I found many of the parts this way, but I had to design a few myself. The project includes all the required parts. You can find the correct…
Saw this video on Youtube before I got a printer, decided to make a more compact version. https://www.youtube.com/watch?v=bRGt_Fh9CVA&t=588s Wiring design is the same. I bought the TP4056 & ZB2L3 on Amazon, I am not recommending any…
Needs 2x countersunk Screw for Rigmount is designed for M8 2x M6x30 socket head screw & 2x M6 nut for mounting the light. the design allows for about 30degree of tilt in each direction
This model is compatible with the lego system.
Another LiIon Charger case. Biggest problem for me was until now, that good cotact to the LiIon battery was mostly poor. PLA is pretty brittle and not a good material for spring loads. So I decided to create a steel spring load with M4…
A simple case for 3x 18650 Batteries TP4056 charge module and a LM2596s DC-DC Step-Down converter. The top can be fixed with M3 x 8 screws
If you, like me, have too many TP4056 charger modules, and want to organize them using Gridfinity. I've got the perfect thing for you! The magnet holes are 6.09mm, so you only need to press them in to the holes. No glue required. I also…
Mankey’s wild energy is captured perfectly in this low-poly design, where its round body and spiky fur become a series of sharp, angular facets. Its clenched fists and wide stance give it an instantly aggressive, restless look. The…
This model provides a small and effective box for TP4056 charger module. The box is useful, as shown in the images, the box has some space for cables on the back, collected in a single hole, in example when a JST or similar connector is…
This enclosure is optimized to securely and compactly house the TP4056 charging module. The structure includes a stable base and side walls that snugly fit the board’s dimensions, preventing unwanted movement. It features precise cutouts…
Case housing ESP32, 128x32 OLED screen, TP4056 on top of ESP32 and a 1500 mAh Li-Po battery below everything.
BOM: Tp4056 type-C charger (for example https://pl.aliexpress.com/item/32930640893.html?) 1x4 2.54 male gold pin connector (remove two outside pins) 18650 batttery spring plate (i found them locally, they need to be 18 mm wide, they are…
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
Given the disparity in our heights the front seats in her B200 are adjusted forwards and backwards rather regularly. This is done by lifting the lever under the seat, and scooting in the desired direction. However, while the Benz is in…
This is a V2 of my protoype which needed more manual corrections. This one you can directly fit on car. I used and tested with PETG material and had very good results.. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes…
This is a TP4056 based 20 cell charger which is to be used with a 5V 20A SMPS (for all modules charging at 1A current)
Bracket for SX-64 monitor replacement. Fitting LCD & Controller: AT56TN52 & JD567M03 Two versions: Angled: This fitted perfectly into my SX-64 because my SX-64 is not right angled. Right angled: if "angled" doesn`t fit for you, you can…
This modification of the Gameboy Advance SP battery cover incorporates a Type-C TP4056 charger module, allowing for enhanced functionality. Inspired by Makho's original design (available here ), this mod offers a sleek solution for…
Battery pack, that fits two vape cells in parallel + TP4056 module. ADJUST THE CHARGE CURRENT RESISTOR ON TP4056! Should be printed from temperature resistant filament to handle soldering (of the contacts and on the tp4056 board). I used…
Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module. I'd printed other models but found them too tight to place/remove the cells, so I designed this, giving more clearance and using springs salvaged from an…
This compact model houses a TP4056 charge model with space for a disposable vape battery at the back. Perfect for running LED fairy lights where unregulated output is fine. It can house a round vape battery, about 16mm X 16mm X 38mm.
Angled wall mount for Lego 42056 Porsche 911 GT3 RS Printed in PLA with 0.2mm layers, 4 walls (alternate extra wall) and 50% infill. I used long lego connectors for mounting to make things easier to align. If you want the car to face…
This internal frame to hold in place the MT3608 Voltage Regulator and a TP4056 Battery Charger along with a 3.7v 500mAh Lithium Battery inside the DSO150, is designed to fulfill my upgrade needs and I hope is useful to someone else, the…
Using mitikohalls original design(https://www.thingiverse.com/thing:3245793), I've been able to make a sturdy case for the Nordic Semiconductor nRF52840 pca10056 development kit. The case has a dedicated reset button and exposes most pins…
Tube Case Remix: XIAO ESP32 + SX1262, TP4056 fast charge (Meshtastic/MeshCore)
screw both part together with m3 screws loose tolerance
TP4056 Type-C enclosure. For small form factor module, which has no separate MOSFET. Five pin combined IC is named R302b (DW03 IC clone?), v1008. Dimensions: 17.9mm x 14.1mm This type of TP4056 module is reaching 70-80C temperature, when…
Printable 3D model. Mankey bookend. Pokemon inspiration. STL file.
Potřeboval jsem někam umístit jeden 5.65" displej, tak jsem pro něj vytvořil jednoduchý rámeček podobný tomu, co mám pro 4.2" modely. Seznam součástek: Good Display GDEP0565D90 5.65" 600x448 LaskaKit ESPink ESP32 e-Paper LaskaKit SHT40…
This model is a custom housing designed to secure and enclose a widely available TP4056 Li-ion battery charger module (03962A) for charging a Sony NP-BD1 battery. The design holds the TP4056 module in a fixed position, with a dedicated…
Replacement for A6397280056 door cover in case yours went missing or you want to improve water sealing. Emboss your logo or text using PrusaSlicer. BEWARE, print in TPU/Flex! Else it will not fit since the cover needs to be bend in place…
Please leave a ❤ if this helps you :) Super useful panel mount adapter for adding USB-C port and/or charging to your home projects! There is a cutting guide to place over the thing you want to install it on. Use sharpie to mark the…
This is a small stand I made to mount a RAK 19003 board with a TP4056 Lithium Battery Charging control board into a HarborFreight solar flag pole. Light to use as a Meshtastic Solar Node....There are mounting holes to screw down the RAK…
I wanted to vertically wall mount my Grizzly G0562ZP 3HP dust collector. This involved some 3D printed parts, a 7" to 6" adapter to go to the Super Dust Deputy XL below it, and a 5x6" rectangular output to 6" DWV output to adapt to DWV…
100% infill Supports required Some post processing may be needed depending how clean supports go off.
Printed from ABS-T, mount plate facing down with supports without any problems. Probably will fit also other ACS gascolators.
Magazine loader inserts for the Robins Tools magazine loader to work with the (apparently) smaller holes in the Lord Asdi magazines. Lengthened the inserts to extend through a 24mm magazine. Note this remix in ONLY the resized inserts for…
Quick and ugly remix of @_KaszpiR_ 's quick and ugly remix to use one HW-373 module to charge two cells simultaneously. Please use your own wisdom and judgement when wiring the cell holders. Parallel wiring recommended!
Bluetooth DAC for headphones or retrofit old stereo . Step file available.
Fits the Anker Power Port model A2056 charging station https://www.amazon.com/dp/B072K5ZJXF/ This mount station allows you to firmly hold the charging station and then remove the gate to release the charging station. I have included the…
this was an idea never finish it maybe it will help someone
This is a "smart" charger for the TP4056 type C modules, it has holes for a MX2.0 connector, JST PH2.0, and classic 2.54mm headers, you are gonna have to hotglue the connectors in the appropriate holes for it to hold properly, you also…
A simple charging dock. There is space at the back for a USB-C female plug, and the output of the PCB goes to 2 Jumper Wires. There is an integrated draw to fit the battery you are charging in. The Clear lid should be printed in white to…
Wheater protection cap for Novotegra 03-000566 Socket 250mm The bottom cap has a hole to allow water drainage
Stuff needed: tp4056 charging module (USB TYPE-C) 18650 battery wire PVC heat shrink (43mm and 85mm) (I suppose slightly bigger sizes will be fine too.) Heatgun or hairdryer Rubber bands (to attach cell to holder) Clear tape Possibly a…
I recently bought the GQ 4x4 programmer with the ADP-056 adapter and that large PCB had no protection and much worse, no support for the massive weight hanging off to the side. I decided to rectify that with a full enclosure with the…
This 3D printed delete plate for replacing the OEM switch plates with a plain plate. Printed with ASA, reusing same OEM fasteners.
Parametric 5.8cm tall object with rounded circular geometry and a knurling pattern. Engineered for precise 3D printing.
Parametric 8.1cm tall object with octagonal 8-sided geometry and a geo pattern. Engineered for precise 3D printing.
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
The case accommodates two 18650 cells connected in parallel and incorporates a TP4056 module for charging. A JST-XH connector serves as the output interface. Assembly Instructions: Place the 18650 cells into the holder and connect them in…
Simple holder for charging 18650 batteries in original battery holder and TP4056. Be careful when pressing down the battery holder so that the cables doesn't get squeezed. The chip I use have the positive pad on the left side, please…
Bluetooth DAC for headphones or retrofit old stereo . Step file available.
lego 30134 40243 4175 3633 3185 3224 30056 19121 41823 33303 32932
TP4056 Type-C enclosure. For small form factor module, which has no separate MOSFET. Five pin combined IC is named R302b (DW03 IC clone?), v1008. Dimensions: 17.9mm x 14.1mm This type of TP4056 module is reaching 70-80C temperature, when…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
![#0056 Mini Paint Palette 2 [with 8 paint compartments]](https://media.printables.com/media/prints/396198/images/3326959_82c9af8c-13f3-431b-b7f2-73789fdfde99/mini-paint-palette-2.jpg)
