Liczymy pasujące modele…
Inspired by this 3D Print by user option8 in 2015. I didn't like the 2 part construction and it did not fit my watch so I decided to update the design. Being a single piece means it feels much heavier and more solid when handling. There's…
This is the Village set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
I created some stand to tilt the Edifier r1280t a bit. I looks much better now (i think) Please note that i made them a little to deep so a small edge showed at the front. I stuck a piece in to thicken the back a bit so the front edge…
The display module attaches on the front face with four M3x8 screws and nuts. M3x6 screws should also work, but may not get through the M3 nut all the way. I added space for four M6 nuts in the bottom of the holder to add some weight and…
Housing for the fysetc mini12864 LCD Display that can be mounted to 2020 vslot extrusion. To make the reset button work you have to replace the tactile switch button by a lower profile version. This requires some experience with…
Search the web, and could not find a functional bearing with this dimensions. So I create one in a simple way and for fast print. The bearing has no rolls inside. The inner ring has a tap, so it could not fall out. I printed the bearing…
This is a bracket to mount a HEPA filter to the Creality K1 and K1C at the rear fan exhaust. I take the cheap Levoit LV-H128-RF. You can get it on Amazon and Aliexpress.
Remix from original idea by OK1BT @yourmum_52499 TNX! 100W discharge test BOM 4x LiFePo4 10Ah [ 1 ] or [ 2 ] Operate with terminal ↑UP 3x short 8x M6 nuts 8x M6 cable eye 1x QC4.0 QC3.0 PD 5A 100W [ 1 ] or [ 2 ] IMPORTANT! Check if you…
UPDATE: -Added 3 new sizes: 96mm, 128mm, 160mm hole spacing -The 130mm is not a standard size I guess it should be 128mm, so measure twice, print once. This is an IKEA-style kitchen door handle made for 130mm hole spacing. Please measure…
Print with 3 perimeters for stability Use 4x M3 Threaded inserts, outer diameter 5mm, length 4mm: https://s.click.aliexpress.com/e/_DmG9Lyz
I wanted to add an OLED to my custom ergonomic keyboard, but there wasn't a great place on the case. This is a simple solution. Two versions. The original is thicker with a wider bezel. It's easier to print and work with, but a little…
A display cover for the MKS Mini 12864 v3 to be mounted to 20xx aluminium extrusion profiles. Requires 2x M5x10 bolts + nuts and 4x M3x6 screws. Edit 12.01.2022: I've accidentally uploaded an older version of the STL file, where the hole…
I have designed these easy-to-use cable tidy spools to store a variety of cables in a neat and compact manner. My previous method of using rubber bands and cable clips was still problematic due to the cables tangling and the difficulty in…
BTT Mini12864 Display Case for Voron 2.4 and Trident 2020 T slot rail. I didn't like the default folding design, as over time it tends to get loose. This holds the display firmly, at a 20 degree angle. To use this case on your Voron, you…
As seen in my workspace redesign video above… Simple two piece wedge style speaker stand design. Trim piece snaps into the wedge and you can add some glue to be sure it doesn't move. Edifier R1280 are great budget friendly near field…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
BigTreeTech Mini 12864 RGB LCD enclosure I am very happy to present you a versatile simple enclosure for the LCD screen => BigTreeTech Mini 12864 RGB. The purpose of the design is: to have a case without visible screws on the front face.…
This is a cover for the Monochrome 1.3" 128x64 OLED graphic display which can be found here: https://www.adafruit.com/product/938 Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.1 - 0.2 Category: Electronics
MKS MINI12864-V3 case 材料清单 3个M3*8或M3*6螺丝（四个螺丝孔位，其中一个不安装） 2个M4*8螺丝 2个M4 T型螺母 Bill of materials 3 units M3*8 or M3*6 screws (four screw holes, one of which is not installed) 2 units M4*8 screws 2 units M4 T nuts MKS GEN-L V2.1 & Lerdge MOS…
Just a case for a 128x64 0.96 inch OLED I2C/SPI You may want to clean it up a bit, but for me it fits perfectly off from the printer. The OLED Module i use is from AZ Delivery, but they just sell rebranded stuff, so it should be pretty…
This mounting plate is designed for a 128x64 OLED display prototype board. It was designed to fit the part on Amazon with the ID “B09T6SJBV5”. The Fusion 360 file has been included which should make it easier to work this into an existing…
A 3d model of a macintosh Enjoy!
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
MR128, MR62 and MR52 bearings.
This model is compatible with the lego system.
A simple stand for the Edifier 1280T. I've uploaded both f3d and step files for changing it to your specs.
Powerbank 12800 mAh with 18650 Li-Ion batteries. Size 100x42x42mm Part list: powerbank modul IP5310 (LX-LBC 3.1) 3.1A (1 or 2 usb) 4 Samsung INR18650-32E (4x3200 mAh) 4 screws M2x12 silicone cable AWG18 silicone glue Advice: Fix the…
3d model for printable spur gear compatible with lego shafts this is printer friendly version not tested yet please give it a try, write a comment, post a build so I can make adjustments for the shaft clearance if necessary because it is…
Created this OLED case for the OLED 128x64 pixel screen. Pretty basic case with a cutout in the back to support the 4 pin header to pass through. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE April 18 2024]: 5x “b” Versions added, where…
Fysetc mini 12864 case Material list 4 units Insert Nuts M3 L3 4 units Screws M3x10 DIN 912 Lista de materiales 4 uds Tuercas insertables M3 L3 4 uds Tornillos M3x10 DIN 912 Updated version / Versión actualizada : Front Cover Rv02 The…
Voron case for the Makerbase MKS Mini 12864 v3
This is a side-mounted RepRap 12864 KBA V1.3 LCD screen case. This was designed for my Anet AM8 (A8 with 20x40 metal frame). *Some holes might have to be refined for a perfect fit as the boards may not aline the best* The little holes are…
You will need 2 screws and 2 t-nuts to fix it to the extrusion! Recommended to print face down , so make sure to orient the part properly before printing!
I'm not a fan of the TFT screens that ship with the Artillery printers, so I decided to replace them with slick little mini12864 displays from FYSETC and BTT (FYSETC v2.1, BTT v1.0). These displays give you a control knob which I really…
I made a bigger version of bakerpammi's Earring holder. I included bakerpammi's STL for the feet/stands as well. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: Doesnt matter…
A minimalist door hanger for a wc room, designed in the iconic single-line style known from the 1970s cartoon “La Linea.” The simple, playful silhouette and clear shower symbol make it perfect for homes, hotels, gyms, or wellness areas.…
Little BTT mini 12864 display case to be able to mount it onto the RatRig V-minion 3D printer or any other (currently) 3030 extrusion frame. STEP files included in case you want to make some alterations. Parts needed: BTT mini 12864…
The 12864 Mini Display v1.0 from BigTreeTech is a clone of the Fysetc 12864 Mini Display V2.1 . There are a few cases on Thingiverse which look nice, but weren't able to attach the display on the left or right side of a 2020, 4040 or 4020…
This is a basic case/enclosure for BigTreeTech/BIQU LPC176x-based SKR controller board (v1.1 through v1.4, at least), with the ever-popular RepRap Discount Full-Graphic 12864 LCD mounted up front. It is basically a mash-up of three…
Mini 12864 Screen Cover and Brackets for Bear Frame I designed this to reassemble the original lcd Bear Screen cover and brackets as closely as I could. No need to trim the reset button or solder anything. Just print both brackets and the…
This model is compatible with the lego system.
This tool is designed to assist in installing the Teflon seal on a fuel injector for a Ford EcoBoost engine. Before using this tool, depending on your printer, you may need to sand the guide part smooth. Simple instructions for this model…
My smartwatch could not fit the original so I increased the distance for the adapter and the front side.
Voron 2.4 Trident mini12864 NeoMount i want a stable, sturdier LCD Mount for my Voron 2.4 and Trident there are 2 version, V1 is a bit lower LCD and V1.2 the LCD sit a bit higher and easier to mount using long hex screwdriver since there…
BTT or MKS mini12864 LCD display holder with ZeroG logo Prints without supports Category: 3D Printer Accessories
These little OLED displays are super-useful. But mounting them into an enclosure means cutting a really neat rectangular hole, which I find slow & tiresome. This bezel holds the entire module on the outside of the enclosure, and fits with…
Print as oriented in the model, I used ABS, but any filament should do. The tolerances are quite tight, so you may need to adjust scaling, but it fit up pretty nicely for me :) Requires soldering wires directly to the display/controller…
This is an enclosure for the Makerbase MKS MINI12864 V3 - With the forward-facing SD card slot. Designed to be used on a Prusa Bear - but should work on any machine with 2040 or 4040 extrusion to mount. This is intended to hang off the…
Yet another Gotek mounting plate for the AMSTRAD CPC 6128. This is a mash-up of different version found on Thingiverse. Thanks especially to fdivitto thing:2876318 and briefer thing:4603742 for their model. Make some modification to have…
I loved the design of the case made by "derebbe" but it did not fit my Mks LCD12864 version 3 screen.. Also, I wanted to mount onto a flat plastic panel on the dreammaker overlord I am trying to rebuild, and I did not like the fact that…
the WORKING T128 I tried my best to get the horns right since it has a goofy aah horn. you will need glue to put together use a N20 motor for rotator. slip ring: Comidox 12.5mm 300Rpm 6 Wires CIRCUITSx2A Capsule Electrical Slip Ring for…
Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…
Wanted a little breakout box with an OLED and rotary encoder so I could easily navigate and see which disk I had selected on the internally mounted FlashFloppy Gotek boards in my Amiga 500 & Atari ST, rather than use the file selector.…
The simpliest LCD Neopixel wheel holder there is. Used for Neopixel LED ring WS28128B
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Changed the original design to fit with the tactile switch already on the board and to include brass inserts such as these . I hope you like the models! If you want to support my work you can Buy me a Beer !
This is a simple snap case for the Adafruit OLED Graphic Display (SSD1306) (.96") 128x64 character OLED display or any similar .96 display. The design is meant to be small/compact and snap closed. Only the standoffs are exposed. The case…
5 parts that extend your MN-128 RC Rock Crawler front axel by 5mm to make room for larger tires. The servo mount is designed to be modular and adapt to different servo sizes. I have these on my Etsy store:…
Update 11-04-2020: added Grundplatte_test_part.stl for testing and tuning of your print settings Update 03-04-2020: added two-sided versions ("Bauplatte") of both size plates. Update 19-03-2020: added half-sized 128x98 mm version, image…
A simple holder for the 128X64 OLED Display 0.96 inch (I2C IIC SPI Serial) It has holes for m.2 kunrled inserts with a 3mm outer diameter. Print with 0.2mm layer height.…
This model is compatible with the lego system.
Originally published here: (WIP) Motorola Moto G20 xt2128 case by tato_713 - Thingiverse This is a work in progress, the case could not fit on your phone. . For different reasons, I have trouble to test some of the phone cases I have…
I needed a basic screen for an Ender 5 I had just rebuilt, and the BTT Mini 12864 LCD Screen looked like a good option. So I went ahead and ordered one, but then I needed an enclosure and mount for it, and this is what I came up with. The…
Single part case 12864 LCD Full Graphic Smart Display inspired from the great design of the "LCD MKS Mini 12864 Mount Enclosure Box Caja" by Campy : https://www.thingiverse.com/thing:2915718 BOM : 4x M3x12 screws (Don't tight too much the…
This is a housing for the Mini 12864 LCD display to fit inside the Ender 5 Plus chassis without modifications. It bolts on from inside using the original mounting points and screws. You mount the LCD to the back cover first with the M4…
A monitor stand riser to raise a desk-sitting monitor 128mm vertically. I created this to align my monitor to a television screen mounted on the wall above my desk. It could be used as a platform or shelf for whatever you want raised up.…
This is a housing which can be used to mount a "12864 LCD Graphic Smart Display Controller Board" to an Anycubic i3 Mega. BOM: 4x M3 5mm screw, 4x M3 washer (to mount the holders) 4x M3 10mm screw (to mount the screen) 2x M4 12mm screw,…
This model is compatible with the lego system.
A Gotek USB Floppy Emulator Caddy that fits systems that have an internal 3 inch disk drive such as the ZX Spectrum +3 and Amstrad CPC6128, 664 & the external drive enclosure FD-1. The front plate has holes for the standard gotek board…
Blue and black keyboard plungers for the Commodore 128. Blue is used for the function keys, black is used for the main keyboard. These are really only suitable for resin printing. Might work or be able to be adapted for other Mitsumi…
Due to the required overhang it is recommended to use PLA or a fiber infused material you prefer. I have used Proto-pasta matte fiber and Kimya ABS Kevlar. I don recommend using carbon infused material due to the amount of touching of the…
Please note, this design was made to fit the Fysetc verison of the 12864 Full Graphics Smart Controller. I designed this because it is a slightly different form factor than the original model. I'm removing WIP status as it works. It's…
Print with tree supports from the build plate. If you want more colors, adjust the print order by objects. No need to glue anything or use screws. PLA, 0,2 layer recommended
Small and Thin case for mini 12864 display. There's a couple of Mini 12864 display cases around, but I couldn't find a minimalistic one that would fit well on a small printer. The case is generic and can be used on any frame. I've…
This is a case for MKS MINI 12864 v3 with front SD card load. It's made to be mounted on Ultimaker clone with 10mm front panel, on top of the MKS MINI 12864 v1 holes. Designed to be assembled with M3x16 screws. Use glue to attach the…
This is housing for the BigTreetTech 12864 Display. Might fit other versions of the 12864 as well, not tested. Two versions included: with and without the reset button. Be careful: once the printed button is put on the switch, it will…
Cover for the 9pin Joystick ports on the C64. Could glue in bit of antistatic foam for tighter fit if needed. I tested this on a C64 breadbin and the Ultimate64. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .20 Infill:…
This model is compatible with the lego system.
BIGTREETECH Mini12864 V2.0 mount for Voron2.4 / Voron Trident
I didn't like the heavy thick options which are used for mounting to walls and shelves, just needed this simple cover. **Printed laying flat so there is a lot of waste in support material. I tried printing on the side but had problems…
Caja de click para un Wemos D1 Mini y un OLED de 128x64 con un diseño simple pero efectivo para proteger ambos componentes y facilitar su conexión. Aquí tienes una descripción básica: La caja es lo suficientemente grande para alojar tanto…
angled under-shelf mount for 128x64 oled display. requires 2-sided tape to mount
This is rep_rap_discount display holder / case for diy 3d printer. The design is also fits for 2020 extrusion with a holder. Category: 3D Printer Parts
This a first model of tiny scaled (128:1) print-in-place models. This one is a scale model of Crackerbox truck and also update of This model to be in scale. As a drawback, this one is a lot bigger than the original one. Dimensions…
CASE LCD 12864 SMART FULL GRAPHIC Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Filament: ww.3DFilamentos.net PLA Category: 3D Printer Parts
Et un petit support pour ma 1281 ;)
Screen case for a version of Makerbase MKS mini12864 v3 LCD screen with front-loading SD card slot. Use mounting brackets remix parent model by @Voxel3D_Nederland.
There are basically 2 mods available here, in 3 variations… If you want to upgrade the screen to the SH1107 128x128 OLED and add COB WS2811 LED strips, then use the “Modified_3dmonkey_semismart_SH1107_COB_LEDs-v1.6.zip” file. If you want…
Designed to precisely fit over the foam feet of the speakers. You can adjust the tilt angle in FreeCAD.
Joiner brackets and feet for the Hub 75 RGB LED Matrix Panel 128x64 2.5mm pitch. Model ships with the Pimoroni Interstate 75 Starter Kit https://shop.pimoroni.com/products/interstate-75-w?variant=55006518411643
I made this Remix in order to have the print fit my smaller size printer (Anet AM8). Cut up into several pieces, I printed it all in 3 batches: Middle as seperate print, Left & Right side combined, and alt as 1 large print (BARELY fitting…
This model is compatible with the lego system.
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends polaris rzr unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy!
The cartridge case all inclusive! PCB holders sized to be compatible with the commodore cartridges. Single screw hole. Tooth to prevent wrong insertion in the Commodore expansion port. Easy to print and to use, NO rafts required, no…
This is my first real attempt at creating a model. Few attempts and changes leading to this v3 version that is a friction fit for the filter. 10mm standoffs keep the filter and fans separated to allow the airflow to spread out to use the…
Downward-facing stand for the Edifier R1280DB bookshelf speakers. The front bracket just fits between the speaker housing and the cover. — I would be very happy if you have as much fun with the things as I do. — If you like :-) Thank you…
Parrilla Altavoz Edifier Voronoi
I revamped the model to remount the Ender 3 12864 LCD screen to the Voron Switchwire grills. This allows to keep your start up costs low.
