Liczymy pasujące modele…
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Wydruk około 1,35 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
Joined gimbal covers for the Radiomaster TX16s radio. These are printed in PLA with a color stop part way. Black Hatchbox PLA: https://amzn.to/3sOiSnG Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Made to fit the Thinkpad P16s Gen 2 and the lenovo thunderbolt 4 dock. Should fit the previous dock and also the very common Thinkpad P14S Gen 1,2,3,4. Print instructions: 15% infill No supports needed Can be printed in pretty much any…
Designed with Fusion 360 Printed on Anycubic Kobra 0.1 mm layer height Speed : 40 mm/s Filament : 3DFILS 60D TPU
Did not like what I saw on thingiverse. 3D printers don't print very nice in the air, especially when you want ABS, HIPS, ASA, anything other than PLA, so I designed my own, where you can print it out of separate pieces and assemble it…
Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once in right position the upper part rotates freely. Insert the gimbal protection first, then rotate the other part: on the…
Gimbal Protector for the Radiomaster TX16S I have larger Gimbal Stick-Ends than the stock stick-ends. I wanted a Gimbal Protector that would fit over those but also fit in the Radiomaster TX16S case (the one that comes with the…
Quick mount mobile holder for the Radiomaster TX16s. Holds a mobile phone or similar (63 - apx. 90mm width) for use with Qgroundcontrol and Ardupilot or similar. Hardware: 1pcs apx. 60mm long 4.5mm (max 5mm) spring in tension. 1pcs…
!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (also fits for AG01 gimbals) Combined and Single Version Perfect fit with all Materials. I used PLA Please like if you downloaded it :-)
I've been looking for a good box for my TX16S for some time. Either very expensive or just simple polystyrene. Here is my own box. Very easy to print, Rock Solid and Perfect Fit!!! I do not use the internal module. Therefore no fixed…
Yet another transmitter stick protector model! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm or better Infill: 5% - 10% Category: R/C Vehicles
Sticks for TX16S M4 (no threads). Good grip for hybrid/pinch style. You are welcome to remix.
Gimbal protector for Radiomaster TX16S (MKI or MKII) / Jumper T16 radio (should work, not tested). Protector is from a one piece with a grip for easier removing. LED charging indicator is fully visible while the protection is on. Bigger…
This is my Pult Tray for Radiomaster TX16S transmitter. The parts named "Aloy_..." shall not be printed but rather made of Aluminium for best robustness. The Leather Applications are not required but make it comfortable and look…
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
I remix the original handle and put hole for screw and tightening nuts. Use a plug on one side of the handle for a good alignment
Die Pultbasis wird mit dem Rückteil des Senders verschraubt. Ich habe hierfür M3-Einschmelzmuttern in den Druckteilen verwendet. Der Sender muss zur Montage geöffnet werden (4 Schrauben hinten, 2 bei der Antenne) - Anleitung als…
Gimbal protector designed for the brand new Radiomaster TX16S MK3 . Tested and validated on the MAX version . This accessory helps protect your gimbals during transport and storage, preventing unwanted movement and potential damage. 📦…
For maximum strenght you should print it standing up with supports under the hooks
I thought danowar's "Remove Before Flight - Gimbal Protector" was so clever, that I wanted one for my Futaba T16SZ. I recreated the cross bar in TinkerCad to resize it for 110mm centers, and I enlarged the guard ring to 51mm to fit the…
A very simple gimbal protector for the Radiomaster TX16S with holes big enough grand lotus stick ends Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: EcoJake PLA Doesn't…
Designed for printing in ABS @250C through a 0.4mm nozzle at 0.2mm layer height. Print with button face on print bed. Supports will be required for some areas, and finishing may be required on the retaining flanges due to the print angle…
This is a simple spacer to keep the 18650 battery holder from moving around and possibly damaging the power cables going into the radio If you ever plan on keeping your radio in your car I suggest you do not print this in PLA. I printed…
A Remake of the original Radiomaster TX16s Battery Cover with TB Logo. Original Make credit to Radiomaster RC. Unable to make this as a remix due to link being unavailable currently. Hope you enjoy. https://techbytes.ca/3dprints/ IG:…
A spacer to keep the 5000 mah lithium-ion battery from banging around in the battery tray. This will keep everything locked in place.
My remix of the original grips, which are more ergonomic for my hands.
I designed the front and rear holders to use the existing screw holes in the balancer PCB and to also cover all the electronics in the front and back. I just remixed my original model and removed all vertical mount features. I haven't…
This is top plate to install SMA connector in TX16S. Best connector will be one with additional screws on side. For easy print top part is flat. Print requites support.
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
Si pierdes o se te rompe la tapa del modulo externo ya tienes repuesto.
I wanted small wall hook for the radio, and could not find good alternative, so here is my own design. This wall mount was designed for CNC-upgrade handle, but should work with the original as well. Print Settings Printer Brand: Prusa…
I wanted to mount my NEEY Active Balancer vertically because it fits the direction of my installed batteries and their balancer cables. I designed the holders to use the existing screw holes in the balancer PCB and to also cover all the…
remixed the original to make it stronger.
Those things are getting stolen way too often so I took my time in illustrator and Fusion to remake this badge as close as I can to the original. Just have to find the right colors to paint those 3 strips.
In the Rc hobby, everyone wants to have the best possible control over their models. Either it is a drone, a plane or something else, often the pilots feel that they would like to have longer or thicker joysticks for more control.The…
Gimbal protector for 10.5mm diameter gimbal stick
Para todos los que tenemos esta radio creo que es imprescicndible.
You need also M4 Melt thread
Si pierdes o se te rompe la tapa de la bateria de la RadioMaster TX16s ya tienes de repuesto.
Print 2 and slide onto each end of the hinge side of your laptop. I printed mine in Atomic PETG-CF.
This is the gimbal protection remix designed because I have the x9d+ SE hall gimbals on my tx16s, and also wanted switch protection since I use a kwad bag. BIG THANKS TO: Tekniqueman with the original protection found here…
Simple gimbal protector for easier carying in bag without need of using bulky case
Protects Radiomaster gimbal sticks with a diameter less than 8mm
This is a single-piece gimbal protector for the Radiomaster TX16S Mk II transmitter. It fits over the sticks and lightly clips into the neck strap fitting. The model prints well in either PLA or PETG with 5-10% infill and supports on the…
Inlay for the Radiomaster Large carry case to house the Radiomaster TX16s better then original. Suggested is to print it in TPU which will give a nice and soft protection. it has room enough for an external TX including its mounted…
Features Fits perfectly for anything with a GoPro mount Great overall stiffness to prevent shaky footage Fits nicely inside your carrying case for the radio Quick-release design - no need to unscrew all the way and have 2 loose screws!…
The Radiomaster TX16S with the folding stand is great. I am using the TBS Tracer module and the stand taps the bind button on the back of the radio and at times can be a little annoying. I also don't like the idea of the module being…
These are replacement "levers" for the sliders on the T16 and TX16S. Not being a fan of the short stock ones when using them for pan and tilt on my FPV planes, I wanted something longer. Andrew Newton posted a design for some thicker ones…
Fusion 360 file included! It's a magnetic mount for TX16S and Hawkeye 3.5inch FPV monitor Short demonstration video: https://youtu.be/c1FKlvVu_cY Printing: Open stl, split to objects/parts (there are 2 parts), orient as in photo and…
This was inspired by 'maltvat' https://www.thingiverse.com/thing:4681214 This is a new design not just a remix. The previous design by 'maltvat' does not always easily come out. This design has a bit more play and a little handle that you…
A tool to remove the nut from a Radiomaster TX16S switch. No idea how long it will last, but it works and gets the job done. Printed with 2 walls, with an alternating extra, 60 pct infill.
Repuesto de las Empuñaduras laterales RadioMaster TX16s.
capot avec ouverture sur le dessus pour : radiomaster tx16s
Původní boční slidery mi zrovna moc nevyhovovaly. Vytvořil jsem tedy lehce delší verzi. Základní je o cca 2mm delší. Další verze jsou vždy o 1mm delší. Já používám tu základní verzi. Tisknuto z PETG. Tisk s podporami na podložce. Na…
A simple plate for Radiomaster TX16S MKII that allows to remove stock antenna mounting if using only JR Bay as radio module.
I add to the download, if someone needs my project of bms-a Ant 7-16s 320A modification, all files are in. The package contains all the elements from the bms and LCD modifications, there are also heat sink files if someone has the option…
Placa frontal superior RadioMaster TX16s
Copper Nickel sheets https://de.aliexpress.com/item/1005005986261829.html Use 0.2mm/0.4mm Nozzle and PETG for the best result. For 0.4mm Users use this
No support required, just needs two M3 screws.
This is a remix of an already great design. I did not want to cut large holes in my case so I added M5 threads into the base of the handles to assist the glue in holding the handles on. I also created an alignment template (PDF) that can…
This is the replacement Part for the TX16S Vibration Motor. It covers the hole motor and can be used with the standard screws. I drilled the holes with a 2mm drill. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No…
Radiomaster TX16S antenna plate for a long range 8db 2.4 Ghz antenna. At the same time making the antenna removable in case you want to replace your stock antenna. I made it so that it's easy to print with a flat bottom. It wil take the…
Higher Lid for the RadioMaster TX16S - designed it, so I can use 26650 8000mAh LiIon batteries while my 5000mAh LiIon was not enough for multiple days on the flying field. If you need a different height, maybe for 4x18650, let me know and…
I got tired of having my battery move around inside the back cover of my radio, so I did something about it. This battery tray is specific to the aftermarket 3000mAh rectangle packs. It holds it securely in place but still allows for easy…
Rozdzielnica do montażu BMS dla systemu 16s + prowadnica przewodów 1mm/2 - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam…
Printed with 0,2mm Nozzle PETG
Removed the built-in antenna and top switches on my Radiomaster TX16s and needed to plug the holes. Printed in TPU. Category: Other
Copper Nickel sheets https://de.aliexpress.com/item/1005005986261829.html Use 0.2mm/0.4mm Nozzle and PETG for the best result.
I was dissatisfied with all of the available models. They were either too complicated or did not fit the AG01 gimbals. So, I made my own version. The cups fit the AG01 with fully extended sticks. For the TX16s MKII, they can be connected…
Realicé por encargo estas orejas para el mezclador digital inalámbrico Mackie DL16S. Gracias a estas orejas se puede poner el mezclador en un estuche rack como es el Thomann Rack Case 4U Shallow Comparto los archivos STL sin marca, así…
Print “BMS plate top thingy” twice. I shoved looped tape underneath the bottom feet to hold them. Check collections for other files.
V2 Hawkeye mount design with Fusion 360 files No supports and no brim needed Held by friction Requires 3pcs M3x12 (2 screws for TX16S and 1 screw for monitor) 3 slots in radio mount currently has no use but it's left in case later mounts…
Repuesto de los Empuñaduras traseras de la RadioMaster TX16s.
These 3d printable plates replace a stock part and limits joystick inputs to a particular shape. Each mask works on both the right and left sticks. The pictured example was printed from PETG with supports at 0.1mm layer height and 30%…
Although the RM TX16S Mk3 is a decent enough radio, the right and left slider levers are horrible. I use these as throttle for a F5J glider (and other gliders) and in case of quick response (during approach or low altitude) my finger…
Sometimes you just need a little reminder of what you programmed all the switches to do. This helps for a quick glance, especially as a pre-flight reminder. Print a few for your different configurations, or print one and swap out the…
This is everything you need to build an entire 21700-based 60V lithium ion battery, It includes the frames, case, and lid. It was made in just a few seconds using my battery design program that you can find here:…
https://github.com/manbehindthemadness/MavPi
Same print settings for the original cover, I added a strap mount holder so that I can strap my 3S LiPo to the TX 16S for using with my full crossfire module. Category: Replacement Parts
Radiomaster Tx16s Leg Rest for the CNC Handle version. Still easily removable. Super comfortable and the radio angle is good for your wrists. All credit to the original creator https://www.thingiverse.com/thing:4596611 Print Settings…
https://github.com/manbehindthemadness/MavPi
Saw only two designs on Thingiverse did not like either decided to make my own that better hugs the radio. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Infill: 40% Filament: Polymaker…
This is a set of feet for the p4.75-1R1G-16S Led Matrix (32 x 64). It holds the display at a 30-degrees angle. You will need two 8mm M3 screws to attach the feet to the display. No support is needed. This object main web page is:…
Add 15 Buttons to the back of a RadioMaster TX-16S Transmitter. Includes Bill of Materials and assembly video.
Hello everyone! (ツ)╯ I designed a Li-Ion holder for the Radiomaster TX16s case (Fig. (A, 4)). It is for carring four Li-Ion 3,7V batteries (Fig. (B, 1), (C, 1)). It is specifically designed to use with protective casing for the…
I knocked up this little mount so I could attach a little Hawkeye Little Pilot 3.5" monitor onto my TX16S Transmitter. It has a stepped 3mm mount hole (so you can use small washers if required) and uses an M4 bolt and nut to clamp it to…
Mounts to the battery case with M4 bolts and nuts. Check collections for other files.
Mitutoyo dial 1" test indicator holder, skeletonized for easiest fit in toolbox. Shown with no 2416 but others will fit. For reference this indicators plastic bezel is about 2.25" diameter, Stem is 3/8 diameter. I will be uploading other…
Is the Mig-29 chasing the F-16 or the other way around? You could watch this air combat play out for hours while your print grows! Both aircraft are at the same scale. Instructions: The 3mf file is ready to slide with a color change at…
Tx16S wall hook with space for USB sim dongle
I designed this cover to block out the bright screen when I'm practicing in a sim on my computer. It doesn't latch or lock on the controller but it does a decent job blocking most of the screen. Category: R/C Vehicles
RadioMaster TX16s - Asa y pestillo de la caja de transporte de RadioMasterRC
Logo de calandre Golf GTI 16S Match avec patte de fixation arrière
Het is een nagellakhouder voor 16 flesjes nagellak van ongeveer 34mm doorsnee. PLA, K Kan zonder hulp geprint worden.
I have used two spacer and reduced one side of the Spacer. So it fits better for me and the lid of my radio controller closed easier. I also inserted a negative model of the extractor Tool, so the extractor tool has its place. I have…
I wanted something that I could easily remove from my radio when I didn't want it on. I use 12x3 magnets so that i can stick it on when i need it there and pop it off when i don't. The piece that goes over the strap loop is in TPU. The…
A slider cover to prevent dust getting into your radio
