Liczymy pasujące modele…
I was inspired by a 16th century Mughal jali (pierced window screen) on display at the New York Metropolitan Museum of Art . Thus, I replicated the 2 different Islamic Geometric Patterns into something easier to print and light up with a…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Geschenkbox mit Deckel in Form einer 16. Kann mit eigenen Geschenken gefüllt werden. Gift box with lid in the shape of a 16. Can be filled with your own gifts.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Hey friends, I made a small replacement plastic clip found on the Suzuki Carry seat retention clamps. I'm unsure what the genuine part number is, but I suspect it won't be possible to purchase the clip. I used grey PETG and 100% infill…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model uses two #6 screws in my case ¾ inch long to securely fasten an electric cable measuring 5/16th in diameter to the mobile base of my scroll saw. I printed mine with PETG and needed no supports. I included gcode to print 1 or 10…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello! I'm offering this set entirely for free! It is intended as a demo of what the rest of my line of digital files looks like, so I do hope you give it a try! Upon downloading these files you will find, as always, a complete…
Timberjack 240A - 1:16th Scale Holes will need to be drilled out for screws. These holes are marked with indents. Uses M4 and M2 screws. Uses M2 x 200mm Rods
Bottom Bracket Tool for Bafang mid-drive use a plier to tighten the nut ( size of the hex is 45mm) Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 30-50% Filament:…
Update: Uploaded a new model of the 2.25 sander as well as new 1.125 sander. New models facilitate easier printing. A sanding block that perfectly fits a 1/8 sheet of 9x11in sand paper. Tear the sand paper sheet in half the short ways.…
Because I couldn't get consistent results I designed this easy to use die to bend the brake tube around. It works a treat! I've download other peoples files and I'm happy that I can pay back with a useful design of my own :) Here's the…
16th birthday medal you can make for your son or daugter. Best printed with the color change function, see pictures. I used 4 colors, Prusament Galaxy-Black, Gentlements-Grey, Copper and Gold.
***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…
Although an April's Fools joke, this is still a wearable and fully functional knight's crotch armor design. This 3D printing file kit accurately matches 16th century codpieces from museums. An absolute masterpiece, I believe this is my…
Case International 4894 Tractor - 1:16th Scale Uses M4 & M2 Screws M2 Rod used to mount mirrors to cab
Chisel Plow - 14 Shank - Style 1 - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
This is an accurate 1/16th scale model of a 1200x800 Euro Pallet. It is printed in 4 pcs (2 identical) and snaps together. (with slightly more force then you feel like you should apply😁) It is best printed with a 0.25mm nozzle, and 0.1mm…
Allis-Chalmers 7580 4WD - 1:16th Scale Uses M4 and M2 screws
Drift wheels and tire combined, its a very simple design, not made for looks, but to be functional, balanced and easy to print. Dimensions: Wheel+tire diameter - 70mm - smaller than the standard 80mm, for better throttle control and lower…
Remix to allow for using 6mm wide belts on 3mm motor shafts.
Versatile 935 4WD 1:16th Scale Uses M1, M2, and M4 screws
Stalk Shredder Chopper - 1:16th Scale - Inspired by the John Deere 27 Stalk Shredder Uses M2 and M4 screws We used 3mm diameter Rivets to hold the tires on, but M3 Screws work too. Some areas that need holes drilled for screws have been…
General Guan Yu on Horseback, 16th C CE, now in the collection of the Minneapolis Institute of Art. Testing out using Specularity UV textures as a displacement to add details to low poly models. The details on this may show up better on a…
Imported from Thingiverse. Original upload was 04.11.2018 (dd.mm.yyyy) Consider to follow if you like what I do. Helical gear for Lego. These are 45 degrees. You have to make 2 of the same gear to make it work. No mirroring needed. Resin…
Here is a two-piece scale construction site rock sifter. Included are pictures of the sifter in use. I printed the base laying angled face down to the bed with minimal support on my Bambu Lab X1.
International 4366 4WD 1:16th Scale Uses M2 and M4 Screws
Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.
Manure Slurry Tank Wagon - 1:16th Scale Uses M4 & M2 Screws Certain holes will need drilled. Indents on parts show drill locations Two 6.4mm x 152.4mm (0.25in x 6.00in) rod for axles Needs rubber hose with 10mm Outer Diamater x 8mm Inner…
International 4586 4WD 1:16th Scale Uses M2 and M4 screws
This is a custom siren! It's a dual tone 2001 siren, the chopper port is a 4/6, but if it was a real siren it would be 8/12. You could print the chopper model with the ports separated and could be glued together, or the chopper model that…
Manure Spreader - 1:16th Scale Uses M2 Screws and 6.4mm diameter x 138mm(1/4in diameter x 5-7/16in) rod for axle 1.75mm TPU can be used for hydraulic hoses
Chisel Plow - 10 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
These two nuts are actually really easy to print if your printer is well calibrated and they work great. I only had the opportunity to test the 5/16ths but I'm confident the m8 nut is good as well. They are totally standard dimensions and…
Chisel Plow - 12 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Round Bale Feeder - 1:16th Scale Real life dimensions: 8ft diameter x 4ft 3in height Print with tree supports for easier post processing.
Case 2470 Tractor - 1:16th Scale Uses M4 & M2 Screws Uses Chunky Crab Planetary Rims and Tires (See other models from us)
White 4-210 Tractor 1:16 Scale Uses M4 & M2 Screws
Case 4890 Tractor - 1:16th Scale Uses M4 & M2 Screws M2 Rod used to mount mirrors to cab
UPDATE 2025-10-20 - Another user has created what is probably a better model for this application. Mine cracked (after a good bit of use, but still). At some point, I was going to redesign it to be stronger (and I still might) but at…
Wishek - 16ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 43 copies of 28in disk blades and 1 copy of 25in…
Chunky Crab Planetary Rim - 1:16th Scale Uses M2 and M4 screws Basic Chunky Crab Planetary Tire with several sizes of rims.
Kui Xing (God of Literature), 16th C CE by Minneapolis Institute of Art is licensed under CC Attribution-NonCommercial-ShareAlike Fixed in Makeprintable. Minor changes to thin areas of statue. Added some poly as well then smoothed in MS…
Case 1470 Closed Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles
You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…
Standard US 4-way stringer pallet that is 1/16th scale. There are two different STL files you can download. One has the "planks" (deck boards) on the top and bottom of the pallet, the other STL file has the deck boards on the top only and…
You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…
Large Square Bale 6x3x2 - 1:16th Scale Print with fuzzy skin, clip off ears, and torch/heat away marks
Offset Disk - 16ft - Style 1 - 1:16th Scale Inspired by the Case International Harvester IH 770 Uses M2 and M3 screws Uses 3/16 inch (4.8mm) rod to attach blades to build. There are holes that need to be drilled out. These spots are…
This part is for mounting a Viltrox L116T LED Light Panel to 2020 Extrusions. I designed this part as I needed a way to mount the light panel to my overhead camera rig I put together out of 2020 Extruded Aluminum. The holes for the screw…
Case 1200 Open Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles Recommended to print PTO with 0.2mm nozzle, or you can use an M2 screw in place of it
Wishek - 14ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 32 copies of 28in disk blades and 1 copy of 25in…
Als ich feststellte das bei meinem MK4 Probleme mit Wellen / VFA auftraten habe ich mich mit dem Thema befasst. Häufig sollen defekte Pulleys am Motor das Problem sein aber nachdem ich alles gegen original Gates Bauteile ausgetauscht…
Round Bale - 1:16th Scale Print with no supports and fuzzy skin. Real life dimensions: 5ft 8in diameter x 4ft 8in width
This is a 16 tooth Oval gear for the Spirograph frame by 3Domas... and should fit the variants. It was a bit challenging to add an oval to a ring with such large teeth, but I got it to move smoothly without snagging and it does pretty…
Massey Ferguson 1500 4WD Tractor - 1:16th Scale Uses M4 and M2 screws 6.4mm (1/4in) rod used for axles Some holes need drilled out. Indents on model show spots.
Since I couldn't find anything on Ali when looking for a spare part, here is a replacement for the 12mm hex tire adapter (part number: 32746). I printed it in ABS, but it would probably also work in PETG or PLA. edit to your needs.
Wishek - 16ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 39 copies of 28in disk blades and 1 copy of 25in…
Air Jordan "Jumpman" 16th Birthday Cake Topper Printed in PLA 0.2mm layer height 0.4mm stock nozzle Print with supports for the prongs that stick into the cake Print reversed (face down) to ensure a nice surface finish when displayed on…
I bought a pegboard without verifying that it was a standard 1/4" x 1" pegboard. It was 3/16" x 1". I decided to design a simple dovetail that could accommodate different shapes and sizes. Only print that required supports is Paint Shelf…
Marble spiral designed for part of refrigerator track. 15mm center to magnet face tolerance. 32 faces pitched at 1mm increments to create downward spiral. Would encourage use of brim to print. Organic supports were painted in where…
A basic panel / fascia / dash hole cover designed to pop into and fill holes of 52mm (2-1/16”) diameter and approximately 3mm thickness. Material should be chosen to suit the application, however, for anything in cars or boats etc that…
This is a remix of toolsons mk2 Y idler mount, now working with 3mm gt2 idlers. Made for p3steel v4.2 by Makergal Print instructions Unassociated tags: P3steel v4.2, toolson mk2 Category: 3D Printer Parts
Case 1470 Open Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles
A super simple but effective cable for attaching standard 5.5mm / 3/16th wires. Great for using up those last few bits of filament on a spool! Printed in either PLA or PETG at 100% infill.
Disk Chisel - Glencoe Style - 9 Shank - 1:16th Scale Uses M2 Screws. There are holes that need drilled out. Indicated with indents.
This is a scan of the sculpture 'Portrait Bust of a Man', currently on display at the Ringling Museum in Sarasota, FL. From the site: According to an inscription on the base of the bust on the left, the sitter is meant to be Francesco…
Saw RevK's awesome mount bracket, but realized the only mounts I had were the 9/16 rail mounts. Remixed his original mount to fit. Hope it comes in handy for someone. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No…
For using Formbot kit with stock idlers (not BFZ)
Disk Chisel - Style 1 - 11 Shank - 1:16th Scale Uses M2 Screws. There are holes that need drilled out. Indicated with indents.
This is a remix of MattyVee's 16T idler base to accommodate a larger and more robust idler. In his version, you have to use an idler no more than 8mm wide. This version will allow you to use a 10mm wide idler (6mm belt), up to 15mm tall.…
I saw the wonderful scan of the front panel of @artsmia 's 16th Century Italian Cassone and wanted to make it 3D printable. I extruded the surface and made a plane cut. I also added a version of the panel alone, I cut some surrounding…
This knob allows you to open a 1/4" socket head bolt with just your fingers. No key or wrench needed. You can use it as a tool or permanently mount it to your bolt with some CA glue. No more searching for that specifc 3/16's allen or hex…
Unfortunately, there are no longer any spare parts for the A2016T and the bracket often breaks, so here is a cheap replacement. Part Number: 30286 There is a 2nd version if the shock tower with the holder for the body mount has broken…
When I downloaded this mod, I checked the X tensioner and you will need the original Prusa pulley 623, but If you wanna use Caribou pulley 2gt 16T Toothless, you can check this pulley is “dancing” inside tensioner. I prefer little pulley…
Yamaha Jog SA-12 Speedometer Gear (16T) Replacement speedometer helical gear for Yamaha Jog SA-12. Designed for high durability and a precise fit. Successfully tested in real-world conditions after being printed with Nylon. Technical…
A tool designed for tightening or loosening the bottom bracket of Moquai Bbright (screwed) 16T, commonly used for Cervélo.
Since I did not have the required 17T M0.6 pinion at hand and did not want to buy yet another part for the MOGSTER build, I designed a pulley to fit a 16T 32P (M0.8) pinion I did have already. Designed based on the STL from the purchased…
I fixed the listing error from the original creator. The original creator said it was 18t but it's actually 16t.
A simple cup spanner for bottom crank nut removal. Printed from ASA-CF so unsure of strength and fit of other filaments
This is a remix of the 16T Tensioner puck for vekoj's Revised X-Axis for Prusa I3. This remix allows the use of the slightly larger (10x15mm 3mm bore) 6mm Gates belt 16T idlers by LDO. They are more robust than the tiny little idlers the…
This is a remix of starfox64's excellent idler bracket for the Ender 3. My belt was dragging on the X beam, and I wanted to free it up. The original 20 tooth idler was to big for my application. So I reduced the size to fit a 16 tooth…
Make sure your eye hooks fit through the cap before using! Printing Instructions: Print with the broad flat side down with any default profile: 1x: Cap 2x: Inner Usage: Place both sides of the inner pieces on the end of the wooden dowel.…
A fairly simple minimalist model of the 16th St. Bridge in Pittsburgh. Made for a friend of mine. Printed with an 0.2mm nozzle on my Kingroon. The models in the photos were printed at 15% scale.
Shelf clip that fits on shelves 17mm or 11/16th inches or less that lets you hang things. Prints on its side without supports.
Using Camo Starter Clips , it's difficult to get the proper gap between deck boards. Specifically, Fiberon composite decking used with the Camo Edge Clips hidden deck fastener system . The Fiberon manufacturers install instructions call…
A simple snap-on light grid for this very good Viltrox panel LED light. I learned about it from an Adam Savage video 3mf files contain snap reinforcements (infill) to increase durability
I bought this idler: https://jacksarmystore.com/LDO-Idler-16T-fuer-2GT-6mm-Riemen-3mm-Bohrung-Toothed The idler is 10mm wide. The original part was unfortunately too narrow. Printed with PCCF standard settings
A rare, obscure supercar developed by Cizeta in the 90s. AFAIK this is the first free publicly available 3d model of it
Maybe you have seen Adam Savage's video about worklights where he mounts a Viltrox LED panel to flexible arm to use it as a worklight. With this adapter it's easy to mount the panel to a simple microphone arm (or any other swivel arm).…
Remixed to use on GT2 16T with M5 spacing from Creality printer. Also reinforced the body to decrease flexing.
This is a socket holder for an Oil Pressure Sensor Socket. This particular socket is an OEM Tools ½" Drive Deep Socket. The socket size is 1-1/16th. Other sockets for this purpose may vary in size; but this tray should work if the socket…
CUSTOMIZABLE PARAMETRIC MODEL - edit numbers, drag sliders, rebuild. This is a TrueGeometry Playground recipe model: every dimension comes from the variables at the top of the script (gear module, tooth counts, thickness, axle size,…
This is an untested design, not a proven print. Fit, clearances, tolerances and print behaviour have not been checked on a real printer, and nothing here promises that printed parts turn freely. Test a small print first. A two-gear…
CUSTOMIZABLE PARAMETRIC MODEL - edit numbers, drag sliders, rebuild. This is a TrueGeometry Playground recipe model: every dimension comes from the variables at the top of the script (gear module, tooth counts, thickness, axle size,…
Kit I bought for my rabbits water system didnt come with stoppers so i made this for a quick fix and it works great!
Reinforced modification of the original Ender 3 Y-Axis Idler Assembly for Motor Relocation . Both sides of the mount are merged into a single structure for improved rigidity and overall stability. Two versions available:…
Allis-Chalmers 7580 4WD - 1:16th Scale Uses M4 and M2 screws
Timberjack 240A - 1:16th Scale Holes will need to be drilled out for screws. These holes are marked with indents. Uses M4 and M2 screws. Uses M2 x 200mm Rods
Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.
This is a custom siren! It's a dual tone 2001 siren, the chopper port is a 4/6, but if it was a real siren it would be 8/12. You could print the chopper model with the ports separated and could be glued together, or the chopper model that…
![Ender 3 Y-Axis Motor Relocation – Reinforced Idler Mount (16T/20T) [back]](https://media.printables.com/media/prints/de0e6ffc-d396-4957-aa3a-3cbc94b3d4e7/images/14265752_bdea3296-526d-4ce7-9166-ab7eddbd0494_f244e191-d24f-480f-bdbb-ba8c5be4a257/img_20261028_113743_preview.jpeg)