Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case
You shoul use a 4 M3x10 screws to secure a screen to the case.
- Pobrania
- 1630
- Polubienia
- 57
- Ocena
- 5
Liczymy pasujące modele…
You shoul use a 4 M3x10 screws to secure a screen to the case.
The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. Here is the link to the design in Onshape:…
This is a remix of https://www.printables.com/model/1030369-waveshare-esp32-s3-7inch-capacitive-touch-display. The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. There is a cutout…
A tabletop stand for the 7 inch models of the blackmagic video assist monitors, both 3G and 12G versions
7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…
Waveshare 7inch display for RPi/RPi zero enclosure with VESA 50x50 mount. You will need: 8x M3x3.9x5.7 inserts (Ruthex M3) 8x M3x6 tapered screws 4x M4x5.5x4 inesrts (Ruthex M4S). For better 50x50 mount strength, mount M4 inserts from the…
I couldn't find any cases for this screen type from Amazon on any of the sites, so I made one. There is one cutout in the side of the front face to access the rocker for brightness and volume. Be careful installing the screen here, it is…
This storage case doubles as a stand for a Waveshare 7inch Capacitive Touch Screen LCD . 4x M3 x 8 mm socket caps screws for the main case 6x M3 x 8 mm socket caps screws for the hinges 6x M3 nuts also for the hinges The 12 optional…
Like the original, but faceplate with rounded corners and even frame width
The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…
Cord Grip (Wartel) for a 0.7 inch or 18 mm cable. (PLA+) Cord Grip (Wartel) PG-7 (PLA+) With flexible insert ring. (TPU)
Table top housing for Waveshare ESP32-S3 7inch capacitive touch display https://www.amazon.de/gp/product/B0D2NMCY7K I use it for OpenHASP with Home Assistant, in this case to mainly monitor solar panel power generation, batterie and…
This is a case for the WaveShare 7" display https://www.waveshare.com/7inch-hdmi-lcd-b.htm It includes a 30mm x 30mm M3 mount point in the back for any bracket you may want to develop for it. Hardware: 4x M3x8 bolts. 8x M3x5x4 heatset…
This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…
Basic Case for a 7inch IPS touch screen i found on amazon ( https://www.amazon.co.uk/gp/product/B07YJDSCKR/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 ) Brand is Jun-Saxifragelec. Friend of mine bought from the same manufacturer and…
This is a headlight mount for the Yamaha XSR700, mine is a 2019 model. The print is made to fit the original mounting points / brackets and the original bolts. It is designed to (pressure) fit a 7 inch LED headlight. The front can be…
Update: Have tested it and found a few parts are not strong enough - redesigned slightly and changed the orientation of the print to solidify it more.
The Waveshare ESP32-C6-LCD-1.47-M (ESP32-C6 1.47inch Display) is a really cool easy to use iot device. This basic enclosure lets you place it just about anywhere. I printed it in white PLA so the multicolor LED under the display really…
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
A tight fitting case for the Waveshare ESP32-C6 1.47inch Display Development Board, 172×320, 262K Color, 160MHz Running Frequency Single-Core Processor (Amazon 2025/12). Every case I found that matched this description was way too long…
I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…
A case for Raspberry Pi with 7" 800x480 LCD and HDMI cable. The viewing angle can be changed with the back stand. Holes on the back side provide cooling air as well as access to Raspi Pins and SD card. The side cap can be removed to plug…
RU: Версия для другого экрана Отличия: кнопки сделаны вертикально, не сделана подставка. Важно - в файлах версия для использования вплавляемых гаек. Из-за странного, на мой взгляд, расстояния между осями крепления - предлагаю сначала…
Casebody for Waveshare 7 inch Display. https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C) Only small changes to fit the different Positions of OnOff switch, HDMI Port and a bit space for the electronic on the rear side.
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
Created camera holder for DJI O4 Air Unit (lite). I used spare silicon inserts (from Volador VX35 build) - you can print 2x bumpers as substitution (scale it accordingly in a slicer) and print it with soft material like TPU. I used 4x…
I was looking for a more stable stand for my Raspberry 4, which is connected directly to the 7 inch WIMAXIT screen. Unfortunately, I couldn't find exactly what I wanted, so I modeled a suitable stand myself. The stand is an addition to…
This is my try to create 18cm/7inch audio tape reels. There are stl-files attache for different designs (0,2,7). The 3mf-files are a selection of designs i put together on two print plates each. If you want to print the non preconverted…
4xM4 nuts 4xM4 x10 screws 4xM3 nuts or the ones that were in the package 4xM3 x20 screws 1xM5 x60 screw 1xM4 x40 screw 1 M4 wingnut 1 M5 wingnut pull the nuts in with your screws
This 7inch Display Holder is for the very popular Hosyond 7inch display, especially made for the Raspberry PI. I used this for adding an additional display in one of our Photobooth products. The display is placed in the side of an old 60s…
A basic cover + case design for a 7inch touchscreen from FreeNove with a Raspberry Pi 4. Requires 4 long screws at each corner to secure the cover to the case. I made some holes in the case so that you can pass some cables through it to…
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "Trident or a Star" and a diameter of 18 cm. I would like to point out that this is a…
Simple pivoting mount for the offical 7inch raspberry pi touch screen [https://www.raspberrypi.com/products/raspberry-pi-touch-display/]. Perfect for your klipper screen UI or other pi projects. Pivot mount designed to fit on the leg of…
Case for a Raspberry Pi with the original 7inch display. Can be wall mounted or stand on a desk. I used https://www.printables.com/model/727545-raspberry-pi-4/files to model the case around it. Thank you @print_byte for providing the step…
Found myself working on quite a few SBCs recently and instead of having to pull out a monitor every time I wanted to take a look at what the machine was outputting, figured I'd mount a small monitor to my desk. However, after some…
Using orcaslicer, split to objects, paint fuzzy skin onto exterior, paint support only on bridges of the housing and overhangs on the back panel. 3 walls, 0.4mm nozzle, 0.2mm layers. 3MF file from Elegoo Slicer is attached.
ok so first off the main brace that mounts to the sv08 itself is from tommy gun on makers world can be found here https://makerworld.com/en/models/533584#profileId-450393 i just added a mount for the 7 inch screen i got also link can be…
Update 03.05.22: I beefed up the clamps a bit, so they are more rigid (parts 01-04). Rest has not changed. Note: This frame is work-in-progress. While the basic principle has proven to work perfectly, the "official" 7" version i'm still…
Laptop cooler 17 inch, in the back is room for 3x 120x25 mm fan There is room for some foam to seal the air to go trough the laptop and not around that will improve performance Now it is ready to print. I will be posting cooler for 16inch…
Simple bracket to mount MTB wheel to garage wall, radius to match wheel and sized to go between spokes
You will need 4 x M3 threaded inserts 4 x Spacers assemble and screw in ;) good luck
A remix of the Waveshare ESP32-S3 7 inch Capacitive Touch Display Case but with a space in the back for a battery. Due to the space in the back for the battery the case is slightly thicker than the original. I also simply tapped the…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/lU2McMl1FRu Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Doesn't Matter Resolution: 0.16 Infill: 25% Filament: Hatchbox PLA…
Weather station source code: https://github.com/marwask/weather-station
I needed a Shell/Stand for the Raspberry Pi Touch Display so I decided to make this on Fusion360. This stand fits the Raspberry Pi 3 or Raspberry Pi 4 as they have the same mounting holes. You use the screws included with the Raspberry Pi…
I purchased a used SimDT 7inch DDU, the included mount was for Simagic and the Moza one would have been 30 dollars to ship and most likely wouldn't have worked, so I made this, sturdy, has up & down adjustment, and faster than getting it…
I made a basic stand for the Jun-Electron 7" Touch Display that I bought on Amazon. I'm not a fan of the folio case stand it comes with so this will replace it. You can use it with the screen alone with your PC or whatever or attach a…
A simple remix of the Plate mounting bracket for 7" touchscreen case so it can be mounted on top of the Tukkari Printer enclosure. I printed it with Polyterra PLA and it works pretty good. No special settings needed.
This is a stand that holds the screen keyboard of a iPad Pro 9.7 at a tap-friendly angle. Attach with spring-loaded pawls. And this has a mechanism to store the Apple Pencil and eject it by pressing a button. Errors in the model would be…
made specifically to hold the antennae for a walksnail Micro VTX, but will handle any VTX with dual antennae and a GPS 880 with Compass. This basic design works well with both the HGLRC (my default) and the RDQ 880 GPS receiver. March28…
This is a 3d printed mount to attach a 7 inch LCD display to a spare Phillips monitor mount which came with my 4k display (specifically the 27E1N1800A 4K Ultra HD 27" IPS Monitor). As that's probably quite niche I've included the mounting…
I made a support for Eviciv 7 inch screen for 3030 profile with "RatRig V-Core3" written on it. Print Settings Printer: Caribou Duet 320 Rafts: No **Supports:** No Resolution: 200 **Infill:** 15 Filament: Polymaker PETG Black Category: 3D…
Raspberry Pi 7inch Screen Mount by BEAVIS You will need to print two of these, one in mirror. Affixes to the back of the Raspberry Pi 7" touchscreen with small PC type screws. You can see how I used these here: http://bit.ly/BEAVISRasPi…
Did a remix and added a built in G3 instant camera mount. requires support
Das Gehäuse ist sehr kompakt konstruiert. Damit die Kabel zwischen Pi und Display montiert werden können, sind zwingend Winkelstecker erforderlich. Für HDMI die Waveshare Adapter verwenden, für USB habe ich einen 180 Grad Adapter…
I did not find any feet for the SourceOne DeadCat version that I liked. I find that the motors screws must touch the carbon frame, If they squeeze the TPU part they come apart. So I make my own in freecad, sourcefile and step included.…
I’ve designed a custom holder specifically for 7-inch vinyl record (45 RPM) adapters, inspired by the lack of a dedicated storage space for the 45 adapter on my Voxoa T80 turntable. This practical and compact solution not only securely…
Gehäuse für das Display und extension für RFID PN532. Auto-Standby per eingebautem Präsenzradar: Ein HLK-LD2450-mmWave-Radar hängt direkt am UART-Header des ESP32-S3 auf der Displayplatine (kein separater Node) — Display schläft…
My Geeekpi display case requires at least a desktop stand, since the feet supplied with the display do not fit once the case is installed. I happen to have a section of Honeycomb Storage Wall (HSW) installed along the front of my printer…
This Baseframe for Waveshare's "ESP32-S3-Touch-LCD-7 800x480 Pixels Rev1.2" has a tight enough fit to look good from the front but also allow for some print imperfections. Printed without supports and default settings (0.4 nose, 0.2 layer…
Be careful. To get the full mouth, just use the attached file and mirror it to the Z side in the slicer app.
Customized version of http://www.thingiverse.com/thing:656884 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=656884 Instructions Using the following options: SDcard = 1 RelieveOverhang = 10 DisplayType =…
This model contains the following features: All Ports are restricted except SD card slot and power plug. Bottom Case has lots of holes for air. Top plate is rack mountable and acts as a frame while also covering all waveshare hat buttons.…
Since the Waveshare 7-inch EPS32 model I use is to display aircraft traffic near me, I needed a case to hold it and used the model that 3D_Project3R created/remixed to house it. This is a great housing except now I needed a way to display…
Required parts 4 screws for mounting (4mm diameter) anchors adapted to your wall Model The big part on the bottom hides the cables. Print instructions The plate is separated into two parts to fit the Mini+ plate. It can be printed using a…
7" TTL display with HDMI to TTL module on stand.
Also works for the color G variant. measurements from https://files.waveshare.com/wiki/3.97inch_e-Paper_HAT%2B_G/3.97inch_e-Paper_G.pdf OnShape link…
Fun smiling pot holds most extendable stick in grow lights like this one: https://www.amazon.com/Yadoker-Growing-Spectrum-Adjustable-Automatic/dp/B0983HPG4L Pot it approx 7 inches round and 6 inches tall.
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
Outside frame for 7inch 2-Din head unit for 2014 kia picanto
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
Model was made for playing nintendo ds style games on steamdeck with additional LCD or playing game while watching stream/video/movie. The main idea was to have one USB-C for power and video, but i failed to source correct LCD and cables.…
A Skadis mount for cheap 7inch touch screens from aliexpress https://www.aliexpress.com/item/1005012356902673.html?spm=
Lucky 7inch by clover fpv. Bando boot ready for banger Fits 2808 and less
30.4.21 New Version with holes for buttons Case for stratux Europe Project https://github.com/b3nn0/stratux and https://github.com/TomBric/stratux-radar-display You have to chose high qualitiy usb cabels, this is the most problem if it…
This is the USB extension I used: CY USB C Extension Cable,USB 3.1 Type C Male to Female 90 Degree Right Angled Extension Data Cable 30cm : Amazon.com.au : Computers This is the MicroSD extender I used: 4 Pack MicroSD Exteneders | Buy in…
This is a Mount for the Anet A8 LCD (5 buttons) it attaches to the back of Thing http://www.thingiverse.com/thing:1585924 Timelapse Backing: https://youtu.be/NMMJD39fxxo Faceplate: https://youtu.be/0KvTqpyjctU Print Settings Printer: Anet…
Just a small screen protector for when i travel with the 7 inch touch screen....
RU: Версия для другого экрана Отличия: кнопки сделаны вертикально, не сделана подставка. Важно - в файлах версия для использования вплавляемых гаек. Из-за странного, на мой взгляд, расстояния между осями крепления - предлагаю сначала…
Lucky 7inch by clover fpv. Bando boot ready for banger Fits 2808 and less
Update: Have tested it and found a few parts are not strong enough - redesigned slightly and changed the orientation of the print to solidify it more.
Supporto da tavolo per display da 7 pollici tipo G I 4 fori sul retro sulle dimensioni di un raspberry Category: DIY
Per necessità ho creato una versione del supporto da tavolo per metterlo a parete Category: DIY