Liczymy pasujące modele…
Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For those of you with ECM Manufacture coffee machines, here's a model of a tamping station or stand for your standard or naked portafilters. Best to do it in ABS or PETG as PLA may melt with a hot portafilter.
Wydruk około 7,79 €–9,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 18mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 18mm, proporcionando una…
Wydruk około 8,76 €–10,70 € nettoWstępna wycena jednego wariantu
I needed something that I could use to protect my miniature whilst traveling to, and from games. Most others I found were not the ideal size, or more complex, hence I made this. I've been using this myself for a few weeks, and have found…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Enclosed version of my Gardena Gutter Adapter Water Collector with direct connection to a watering hose. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Remix of the 5.56mm Battlebox (shared by EvolvingExtrusions via Thingiverse) which has been resized and relabeled to hold 50 rounds of FN 5.7x28mm most commonly used in the FN Five-Seven and P90. I resized using PrusaSlicer and…
Wydruk około 8,95 €–10,94 € nettoWstępna wycena jednego wariantu
Key for outdoor water taps. Print instructions Licence: Creative Commons - Attribution - Share Alike Category: Tools
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
I used two of these to connect the https://www.printables.com/model/529130-op-1-stable-stand-decksaver-still-fitting stand to the OP1. Would recommend printing on the side (I've had two break when I printed them upright) The gcode I used…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Simple mount to keep the Thermometer secure and in one place
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the Vallejo Paint Rack from Stu Cameron - a paint rack for Citadel paint bottles of sizes 12ml, 18ml & 24ml, 32mm in diameter. Two variants - 3 or 4 rows, depending on space available if you're trying to fit it in a cabinet or…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
A Portafilter Holder that fits different 58mm Portafilters and helps with a double sticky tape. it fits the different thicknesses of filters for that reason it won't be 100% but will hold the Portafilter well. Print Instruction 0.1 Layer…
Wydruk około 2,38 €–2,90 € nettoWstępna wycena jednego wariantu
March 17 update : I've uploaded a reworked base design that I think is more aesthetically pleasing. See the first two photos in the image carousel. You can now build a holder to your preferences: more appealing Mark 2 base original Mark 1…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
The Idea: Make long garlands with your printer! p.s. this only works with PLA , as it has the property of softening below 100°C (212°F). The garlands are neatly nested on the print bed, allowing you to create a total length that extends…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Enclosed version of my Gardena Gutter Adapter Water Collector. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the adapter off when moved. Print slowly…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
This is a simple dosing cup for the Sage (or Breville) Dose Control Pro or Smart Control Pro coffee grinder and fits in its 58mm portafilter-holder and the portafilter itself without making a mess. It can be printed in PLA without any…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
Spray- / Dosenhalter mit einem Innendurchmesser von 60mm oder 68mm , 2 Löcher für Senkkopfschrauben 4mm zum befestigen an der Wand 20% Infill 0,2 Layerhöhe bei den Schrauben habe ich im Gcode 100% Infill gesetzt das man es nicht kaputt…
Wydruk około 3,57 €–4,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It ist for outdoor use and I will print it in ASA with 50 % infill outer diameter: 40mm inner diameter: 8mm high: 20mm fase: 45°
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Druckeinstellungen Füllung 15% Schichthöhe 0,2mm mit Stützen
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a cable mount for I-type 4040 extrusions (8mm slot width) which requires no fastener. Instead, it is inserted into the slot at a 45° angle and then rotated into either horizontal or vertical orientation, where it stays in place on…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A replacement keyboard foot 18mm and 20mm
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
I had a roll of sandpaper, I needed a drum sander. My design was inspired by Miklosicza's model https://www.printables.com/model/619813-sanding-drum-for-angle-grinder , but fits the sandpaper and hardware I have available. Note: FreeCAD…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Resized Fire Extinguisher or Gas Torch Holder by The_BeardBot to fit my larger 108mm diameter extinguisher. The screw holes sizes are in tact so the same hardware can be used. I just used some doubled up electrical tape for the strap.…
Wydruk około 7,29 €–8,92 € nettoWstępna wycena jednego wariantu
I printed a set of the BriteMini figures for my DM to use in our game. As a thank you, I decided to design this case for her to keep them in. I also opted to deboss her name in the lid, though the plain lid is provided here. The lid did…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena jednego wariantu
Simple 3D printed case for 58mm lense filters. There is a 3mf file with a preset text zone to label the case You can add small foam ring inside to pad a bit the filets. (the internal diameter is 62mm) Print instruction Print in PLA, PETG…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A push-on filter adapter for 28mm filters, a lens hood, a lens cap that can be used with the filter/lens hood, and a flat lens cap with/without logo. The lens hood is inspired of the original one. If someone has the exact dimensions of…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can be printed with 0.4 or 0.6 nozzle. Recommended to have infill of 10% or more.
Wydruk około 8,78 €–10,73 € nettoWstępna wycena jednego wariantu
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Conductor for 18mm panels remix by voltNik Ремикс кондуктора от voltNik'a для панелей 18 Remix from https://www.thingiverse.com/thing:5228089
Wydruk około 8,48 €–10,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cover für das Victorinox Mini, lasst bitte einen Like da oder folgt mir für mehr damit ihr nichts Neues Verpasst Danke MazZe_2880
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
I needed a "holey" lid to accomodate an air lock for my jars. After browsing various collections without finding what I needed I measured an existing glass lid, drew the profile in Fusion360 and rotated id around the centre hole. It's not…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
Protects Radiomaster gimbal sticks with a diameter less than 8mm
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.
Wydruk około 4,95 €–6,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.
Wydruk około 7,01 €–8,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Portafilter-funnel for 58mm-diameters. The smaller diameter of the funnel should fit a 58mm portafilter. Considering Hygiene: While PETG and PLA themselves are food-safe, additives (such as colour pigments) or other byproducts from the…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really liked the design of CollinsDesigns Motor visualizer, but did not have the correct magnets. So I designed my own version for cylindrical magnets with 8mm length and 5mm diameter. My version also has 6 arms, because why not. There…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A clamp to go with the Articulated Arm by Jack, with sizing suitable for a 18mm book shelf, like those of an IKEA Billy, but will of course fit any shelf with that thickness. The photo shows the clamp printed in Prusament Galaxy Black PLA…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Screw Mounted Cable Zip Ties 4.8mm Width, M3, M4 & M5 Heavy Duty No problem…. Zip Ties set (200/300mm) x 4.8mm Width Screw Size: M3, M4 & M5 x (20/25/30/35/40/50mm) Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
First off thank you so much to Print-3D for creating this model. The original works very well and the cooling performance was amazing on my 3D prints, so thank you. The reasons I remixed this model was because I have a EZABL Pro 18mm on…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
Simple wall mount for a DHT22 / AM3202 type temperature and humidity sensor. Sensor gets mounted with a single M2 - M3 screw and nut while the switchplate gets screwed into the wall using 4 tiny wood screws around M3. The hole this mounts…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Universal kit for a soap holder, which is hung on the glass pane (8mm thickness) of the shower. For 3 or 4 bars of soap. (3 bars fits on the mini, 4 bars not) The parts are simply plugged together. Watchout for the correct orientation of…
Wydruk około 8,78 €–10,73 € nettoWstępna wycena jednego wariantu
This project started as a light diffuser for my phone and became a simple snowball shape light diffuser for winter time. Its easy to fit one LED candle inside it. Print a couple and you have soft lighting around the table or else where at…
Wydruk około 3,95 €–4,83 € nettoWstępna wycena jednego wariantu
ER-16 Collet Pin Vise Handle 8mm bolt (CCD-v7) I have had many pin vises, and most aren't worth their money. This one was designed by a machinist (me). This will also work with the same 12mm ER collet shaft that is ER-11 and ER-8…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill. If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it…
Wydruk około 8,13 €–9,94 € nettoWstępna wycena jednego wariantu
The test lead folders on the market are for general use and have only screw holes. Since there are no test lead folders on the market that fit the T-slot of the aluminum frame stand, I made one. This version of the test lead folder fits…
Wydruk około 5,58 €–6,82 € nettoWstępna wycena jednego wariantu
This is a lid of the small round Vtopmart glass container. Sadly those are not available as a spare part from the OEM, so we made one. The seal from the broken lid fits and it is just as watertight as the original. You can print the clips…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill. If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it…
Wydruk około 8,14 €–9,95 € nettoWstępna wycena jednego wariantu
This is a 38mm x 38mm standoff for a small temperature controller board to give it a smooth surface for use with double-sided tape or adhesive. Specifically the HiLetgo W1701 12V DC Temperature Controller . Designed for M4 nuts to be held…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
This is a horizontal ring with an inner diameter of 18mm for mounting on the IKEA Skadis board. The included freecad file should be parametric enough to create any other sizes required. I use it to secure the end of a digital caliper, to…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
v1 model is here My son seems to ‘lose control’ of the lawnmower and tends to hit my landscape lights with the wheel, causing the brittle spikes to break off at the base so I designed my own version that's a little more robust. Designed…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
for thin bottles up to 68 mm diameter
Wydruk około 3,66 €–4,48 € nettoWstępna wycena jednego wariantu
About Found old flexible hose and decided to adapt it to the Dyson V8 (or compatible). This allows you to use Dyson V8 and then attach a hose to it (the direction is important). Then if the hose has a 32mm pipe with a metal pin lock on…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For 38mm high powered rocket motors the polycarbonate retainers can be difficult to install and remove if a minimum diameter tube or a boat tail is used. This key slips onto the retainer and provides tabs which can be used to install and…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Halterung für 68mm Deckenspot Bestelllink: linovum WEEVO 6er Set IP44 Einbaustrahler LED 230V rund - runde Deckenspots warmweiß 3,5W Bad & Außen - flacher Einbau 29 mm : Amazon.de: Beleuchtung
Wydruk około 9,51 €–11,62 € nettoWstępna wycena jednego wariantu
Lötkolbenbuchse für meine Ständerbohrmaschine
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Paioli 28mm fork top cap for moped front fork (Tunturi, Solifer, Solifer-Suzuki, Helkama). Original part is very soft plastic and guaranteed to break if You even think of opening it. Tunturi Part # 651.270.80 M25x1.5 thread. 12mm Hex.…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About Lens Cover for 78mm in diameter. Small three notches can grab up to 2mm of the edge on the lens (see last photo). Please like, create makes and add comments, thanks! Changelog 2025.10.05 - initial release Print provided gcode is…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
A hooded stranger, could be a cultist, monk, or just a cloaked traveler. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…
A dwarf tank/paladin The detail featured on the shield is inspired by an architectural detail of an Art Nouveau villa in Lodz, Poland. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a…
Ready to smack nonbelievers. This has a thin pointy sword - make sure your cooling is good or print 2 at a time. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer…
3 support-free skeletons. All dead, just animated by evil magic. EDIT There is a modified version of halberdier with reinforced leg. Suitable for 28mm tabletop games. Created so that they do not need any supports and print well on a cheap…
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
An elven archer. Could be a wood elf. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
* NOTICE: I reuploaded the correct file - uploaded wrong file earlier that could cause slicing problems * Because it had to be done. The CoronaBeholder is a particularly nasty floating bag of eyeballs. Now, it can't transmit any diseases…
A tool designed for cleaning 8mm, 4-start, 2mm pitch lead screws, such as those commonly found on the Anycubic Kobra Neo and similar devices. This tool features smaller fins on one side of the clamp, which serve to guide a paper towel…
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
He's coming... https://www.youtube.com/watch?v=-ea7oW4XXww Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…
Collection of Gridfinity basic cups height 2 (18mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
A knife for DIY enthusiasts. After printing, it is necessary to break off the support from the front of the knife. Be careful when using the retractable blade, it's easy to get injured. See also: Caliper 0,5mm…
A dragonman Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and MyMiniFactory . Let me know…
Welcome wastelander to my humble collection of Fallout vehicles! All of these models are scaled to approximately 1:50 (28mm) for skirmish games; they should fit well AS IS for Fallout Wasteland Warfare, or adjust them as you see fit.…
Orc fighter with axe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other minis in the…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
A suit of armour on a stand. It could be magically alive, who knows. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Includes variants with 20mm…
I designed this to allow me to mix and match storage options while using the same box design. The removable holders can store hex bits, 3.2 (1/8") and 6.4mm (¼") and 8mm router/dremel bits, or small parts. Boxes can also be divided up…
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
A female elf mage. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The female elven archer…
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
A complete set of 3D printed open-end and ring wrenches ranging in size from 8mm to 19mm. Each wrench is modeled with realistic proportions and fine surface detail - perfect as a decorative item, workshop display, or dimensional reference…
Let's see what I've remixed so far: an Axolotl - check ✅, a hybrid of 2 Axolotls - check ✅, a Lovolotl - check ✅, and now I present you with the one and only Rosolotl ready for valentine's day! :) I am providing two versions - a 6mm and…
Another Goblin with pointy sharp thingy and shield, in 28mm scale. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are versions with square and round bases. Let me know how…
Yet another knight on foot with a sword. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
BOM: Printed with ROSA3D Starter PLA Red Make your DIY furniture building and cabinet assembly much easier with this precise 90-degree L-corner jig. Designed specifically for standard 18mm thick boards—the most common size used in…
A knight in a bascinet, pig-face visor (hounskull/hundsgugel) helmet. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…
Goblin archer. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. Let me know how it printed for you in the comments! Support more…
A Goblin with pointy sharp thingy and shield, in 28mm scale. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are versions with square and round bases. Let me know how it…
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
To reduce the gap between the wall and my tablet frame, I created a specific Quad Lock universal wall mount with a height of 8.8mm.
A frogman. Somebody forgot to drain the swamp and now it strikes back with pointy sticks. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE…
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Secures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 11.5mm hole with at least 1.5mm material thickness Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm. No support…
The Articulated Crab by WebbedRanger now compatible with 6mm and 8mm glass eyes. :) Two variations provided. One for 6mm glass eyes and a bigger one for 8mm glass eyes. Files are named accordingly. I printed the 6mm version. No supports…
An adapted version of the vectored intake wheels to use in FTC with 5mm hex rev shaft. Use of m4 inserts with heat set inserts to pack them close together.
A human cleric with mace Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The old wizard seen…
