Liczymy pasujące modele…
Soldering tip organizer that allows you to store 5 tips in one of the most popular standards among DIY enthusiasts. The distances between the pins allow you to store tips of different types, not necessarily conical ones. The heavy base…
Wydruk około 2,85 €–3,49 € nettoWstępna wycena jednego wariantu
11/22/22 update: If you are interested by RC boats check my other design at https://www.printables.com/model/322399-zryw-1-an-hydrofoil-rc-passenger-boat ------------------------------------------ This is a project I did in 2021. I'd been…
This is a custom 3D printable shroud compatible with slim 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. Easy to print and assemble, you just need fan…
This model is compatible with the lego system.
Bmw reverse (rds\non-rds\bavaria\business) audio device side covers. OEM-number: 65 12 6 907 823 This device can be used on Bmw E30\E32\E34\E36. Reproduced with the example of original part. Perfectly fits and holds on its original place.…
This model is compatible with the lego system.
T12 Soldering Iron Stand / Holder A simple and practical soldering iron stand designed for T12 soldering stations , specifically for the popular T12-907 soldering iron handle . 🔧 3-Piece Design The model consists of three separate parts:…
Bracket and shroud to attach 2x 120mm fans on an Asus Prime RX 9070 XT GPU. Designed to be used with heated inserts, however STEP files are included so you can customize these to your own needs. It might fit on non XT 9070, however it…
The Pope C/60 V year 1907 Electric car Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
Print it as original parts.
Rx 9070 XT Reaper 2x120mm fan shroud Fan Shroud that fits 2 x 120mm fans on the Powercolor Rx 9070 XT Reaper. Important: This shroud will only fit with pcie-raisers, vertically mounted cards! The goal with this shroud was to reduce noise,…
Socket- and Switch 30° Adapter with mount holes for DIN 49073 inserts. Updated Model - first one had a small defect in the mesh Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10% Filament: Generic PLA or PETG…
This model is compatible with the lego system.
Only support bracket for your precious RX 9070 XT.
This model is compatible with the lego system.
This is a custom 3D printable shroud compatible with 25mm 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. For the demo build i'm using these filaments:…
Print and Play. I used my resin printer to make this. The two left ones in the photos are the new ones and the right one is the OEM version.
Makes i possible to mount a 90mm fan to the original backplate. Threaded inserts are needed for this particular design
Designed a handle for the Dometic camping fridge. You can add the moving handle on both sides, then you can open the fridge also from both sides. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution:…
A Kadee coupler mounting solution for the USA Trains SD70MAC. I've provided a template to aid in cutting the notch necessary in the pilot. Uses Kadee #907
Lower bolsters with Kadee 906 / 907 coupler options
Mit diesem Ring zum Unterlegen und gibt es keine Rostflecken mehr am Boden. Einfach aufstechen. Der Ring trägt nach Außen nicht auf.
Two models are remixed: hull 4 and 5 are remixed from a remix to be printed exactly at 8.3mm to fit my prop shafts of 8mm. Then I added a full boat stand. 3MF files are from a Creality K1 Max with 30x30x30cm setup
Printed in TPU @0.25mm layer height at a 45 degree angle to avoid flat spot. Also used Fuzzy skin Voronoi to approximate the seat plastic texture. Mirror along the X-Axis for left and right side. The bumper slides snuggly at the end of…
This is a Gillette Single Ring Safety Razor that i have modeled after my own Gillette from 1907. I bought from a flea-market a few years back, and i was boared one day, so i made a 3D printable version of it, and it should be around 99%…
This fits Traxxas vehicles like the Hoss and is a replacement wheelie bar wheel. They seem to last a decent amount of time even without full infill, give you custom colors, and can be made without driving anywhere. There's an alternative…
Based on the original design, I've removed the included Sapphire and Radeon logos to make it more stealthy. Should be printed using filament with high thermal resistance, ideally ABS.
Firstly, a disclaimer: This is my first serious project made in CAD software, I am a novice at this so the model might not be 100% perfect. I will be refining the design later on so any feedback is appreciated. Do this mod at your own…
Back piece for my rifle instead of regular inserts. Butt Plate 20 degree angle Extension used on model 1907 Anschutz. Print instructions Category: Parts
10mm spacer for Anschütz 1907, based on part-no. 46a.
i had tooth paine every time i came home from the shooting range because i pressed too hard down on my riffle to see clearly through the rifle optics.. so i made a smaller headrest for my big head. Print instructions Category: Parts
The USA Trains modern tank car includes a body mount adapter for mounting a standard #907 type Kadee coupler. This solution allows body mounting a #907 which is a narrower box that is a bit more prototypical and allows the trucks to…
Upozorňuji, že rámy nejsou rozhodně přesné natož maketové.
Palubní deska tryska 0,2mm tištěno svisle. vnitřní krytky přístrojovky čiré PETG. Můstek 0,4mm V palubě je nutné vyříznout díru. Už ji mám vytištěnou takže Dremelka. Znovu to tisknout nebudu :)
I made this to store my GJ907 electric soldering iron. Using my Voron 2.4r2, it cost about 10 hours to print. Tested with ABS. In order to fix the cover, 8 magnets with a diameter of 6mm and a thickness of 3mm are required.
Here is my quick take on repairing a xenon headlight range sensor used on various VAG (Volkswagen / Audi / Seat / Skoda) models (part number : 4B0 907 503). Mine has been broken for many years, leaving the metal insert around the screw…
A model of the Bally C-907 and c-908 guide rail post and cap. Category: Toy & Game Accessories
This model is compatible with the lego system.
I designed this model for my Microsoft Flight Simulator cockpit. I primarily use it with the Got Friends AS33 MSFS sim glider, but it should work with any other glider or simulator that allows undocking the LXN instrument via HDMI and…
Multicolored Como 1907 logo, made for my kid who collects logo's. After he finished his “Eredivisie logo collection” he wanted a “Serie A logo collection” so here is one of the logo's. Print Instructions Print in 0.2mm layers, and change…
Adaptor Plate to mount 3 Noctua Fans (2x NF-A12x25 and 1x NF-A9) to a XFX Swift AMD Radeon RX 9070XT Triple Fan Gaming Edition . Uses original mounting holes and screws from stock fan assembly for mounting on the cooler. Stock cooler can…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 76mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is solid…
Prusa recommends the Synco Super Lube (21030) for lubrication of the rods and axial bearings of all printers. There are a lot of models out there to fit on the tube, but the dosing of the grease with pressure on the tube is something…
Portachiavi con logo del COMO 1907
Lego Compatible. First I designed the first version. Now I got here the second fixed version so print the fixed version.
It is a remix of https://www.instructables.com/DIY-Digital-Soldering-Station/ https://www.thingiverse.com/thing:4774442
Able to use on XFX 9070 line, Swift, Quicksilver, Mecury as i made with tolerances in mind. m3*4*5 thread inserts are required The Cover frame file will do fine with 15mm and 25mm thick fans as long as fans share same thickness.
Handle/battery cover for the BLACK & DECKER Pivot Driver 9078 cordless screwdriver. Printed it in PLA with a 0.30 layer, but I feel like PETG/ABS would be better. Use a brim (must) and organic supports in all places.
use this stand if you want your Hazet Maintenance Unit mobile and not fixed to a wall. You will need 6 M6 bolts, washers and nuts as shown in the pictures and you have to mirror the strebelinks model if you don't use the presliced files.
Spare part for worn vacuum cleaner tube socket
Important: you have to relocate the Airbag Sensor to fit these Enclosure. I dont take any responsibility for using this Prints/Parts in your car. You build this at your own risk. The doorpanel has to be modifed. I will ad aditional parts…
With this Adapter you can mount a PanelPilot SGD 43-A HMI Touchscreen in a Mercedes Sprinter.
Heatset insert pusher for HAKKO soldering iron.
Although i measured 28mm oc from screw hole to screw hole when i printed it it was ever so slightly too small but starting with the middle screw allowed me to screw in the two on the sides without issue. I printed with PLA but the front…
A dual hose mod (add an intake hose) for a Inventum AC907W air conditioner. Might fit other air-conditioners with same design. This replaces the rear air intake of the A/C with a custom panel to allow a separate intake hose. Uses the same…
My workplace's printer came to us faulty. the original gear (translucent white) came to us with broken teeth, and i could not get the xerox customer support to bring me a new one, so i just made one, using a 12 tooth gear that already…
Printed in ABS @0.3mm layer height, 4 wall loops, 25% infill. Held in place by two screws in the front and two zip ties in the back. The camera is stuck in place by the double sided tape provided by Wolfbox See screenshot for printing…
A spare part compatible with several vehicles from the VAG group. Spare part number is 7L0 907 511 AL or 7L0 907 511 E This is an enhanced version of the original VAG part. You can insert an M3 bolt through the star-shaped piece and glue…
Teafal Airforce filters after a few washes get sqhuishy and deformed. With this insert the filter is round again and i think with the suction is there for a longer time.Preferably print this with PETG This is specifically designed for…
Compatible with all XFX models lines ( Swift, Quicksilver , Mecury) as i had made it with toleance in mind ( Use M3x4x5mm threaded inserts, 20mm screw for slim fan (15mm slim fan) or 30mm screw ( for normal 25mm fan) This 3d print adapter…
This is a plate for the 907X. it has an anti-twist pin and uses a 3/4" 1/4"-20 flathead machine screw. I have printed it in PLA and PETG using default print settings on 2 different Bambu printers.
Briggs & Stratton 494439 Rotating Screen Replaces 690749, 691055, 805723 Replaces Old Briggs # 690749, 691055, 805723, 497417, 491793, 807566, 280829, 224135 Print upside down and no supports needed. I wouldn't recommend PLA because it'll…
Bill of materials: 4x M2x4mm Threaded heatset Inserts 4x M2x5mm Thumbscrews 3x M4 Self Tapping Fan screws (should be included with your fans) 1x PH2.0 4PIN PWM fan adaptor cable Zip-Ties to taste 2x Frame.stl 8x Gubbin.stl Print…
Kerdom refused to provide taller headrests with their products so I had to make my own. Too bad. Functional part, ugly af but serves its purpose. Easy installation and sturdy (given print config below). I'm 1'78m (5'10'' for those…
Travel brace for the 9070XT Reaper. The square portion is done that way to prevent brace from bending easily, and to allow users to leverage slicer capabilities to adjust the bracket offset if needed.
.stl file for the 907th coaster. Resize as needed. Category: Other
My first T12 soldering holder didn't fit my trusty, 30-year old Radio Shack wire holder. The wire cage is 28mm ID, and roughly 33mm OD. This might work for other cages by adjusting the scaling, but I also included the Fusion360 file, and…
A Remix for use two 120mm fans. for Sapphire 9070xt Models: Pure and Pulse quick and dirty ;) 320mm long - may print in two parts (The image shows Option 1, which did not fit) The model was created using the hole spacing measurements from…
The bracket is designed to fit only that specific combination. Dan Cases A3 (from Lian Li). Sapphire - Radeon 9070 XT Pulse Upgraded my Gaming PC (DIY Steam Machine) with a 9070XT Pulse from Sapphire The fan configuration allows the…
This is a cold shoe flash mount adapter for Hasselblad 907x body I use for my radio flash trigger. Modelled precisely after the original Hasselblad name tag plate it fits nicely without wiggling and is properly aligned along the lens…
Transporting your case with such a big graphics card may be dangerous. With that part, you can safely retain it. Also, without it it likely won't stay straight: Instructions The small standoffs for the riser cable must be raised a little…
white until 6.8mm finish with blue
A simple parameterized GPU brace designed to support the end of a graphics card and reduce movement during transport or daily use. I originally designed this for my S300 ITX build with a Gigabyte RX9070, but the model is parameterized, so…
Overview This is a remix of the bottom connector (bot) from the original PowerColor RX 9070 XT Reaper Custom GPU Shroud . The remix is intended specifically for builders using a LOUQE Ghost S1 , where the original bottom connector can…
Spacer for TDM КМПн-2/4 SQ0907-0602 if you want to fit contactor inside. Расширитель для TDM КМПн-2/4 SQ0907-0602 если вы хотите установить контактор внутри. Printed from PETg, basic infill, basic (2) perimeters. Supports are needed, also…
You'll find french explanations on my website : https://labidulerie.vicou.be/guide-sac-nilfisk-gm200-300-400/ I had lost the original part and it is no longer available on the market. It is inserted obliquely and clips from below. It is…
This is a quick change mount for a Yihua soldering station using their 9071 soldering iron. No magnets or screws, the mount locks on using a mechanical feature. Original Fraks Flexarm project here…
Had the need for an adapter for moving some switches from the wall to a cabinet. Used Antigravity to create it. OpenScad source attached.
M3 and M4 heat inserts needed. Also suitable M3&M4 screws required to mount everything. 120mm bracket requires 2x M4 heat inserts. End plate requires 2x M3 heat inserts. Note! M4 screws that connect the bracket to the fan mount must be…
Floor Nozzle Brush Repair Part (for Philips FC9071)
A deshroud mod for the ASUS Prime Radeon RX 9070XT, replacing the stock plastic shroud with a low-profile, open-air design cooled by two 140mm fans. The card's existing heatsink and heatpipes stay in place — this mod only replaces the…
NOTE YOU MUST PRINT WITH A PRINTER WITH A 0.2 NOZZLE AND AN AMS SYSTEM OR IT WILL NOT WORK!!!!!!!
About These switch panel blanks fit very well in a Mercedes Sprinter VS30 / W907 OEM panel, to add additional switches to your van with a clean look. Their key design value is the spring/locking mechanism which is similar to OEM Mercedes…
Wall mount for Lego 76907 PLA print
Внимание! Мне оказалась высоковата. Ужать до 15мм и должна сесть идеально. Поддерживает видеокарту и убирает горячий воздух. Печатал PLA
Transporting your case with such a big graphics card may be dangerous. With that part, you can safely retain it. Also, without it it likely won't stay straight: Instructions The small standoffs for the riser cable must be raised a little…
I designed this model for my Microsoft Flight Simulator cockpit. I primarily use it with the Got Friends AS33 MSFS sim glider, but it should work with any other glider or simulator that allows undocking the LXN instrument via HDMI and…
