Liczymy pasujące modele…
I've designed a compact gobo projector that is compatible with Godox V1, AD100 PRO, AD200 PRO flash with the H200R round head. I needed something portable when I'm On-Location. No supports needed if printed like shown on the pictures. I…
This is for your XT2. You can use it as a bumper or add the sun screen for extra utility. Print it black or crazy colors to customize your bike. If you print it please upload a picture and share your creation thanks! If you like this,…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
I designed a 20° and 30° honeycomb grid compatible with the Godox AD200 / V1 flash and the AK-R1 kit - that actually works. The included grid in the AK-R1 kit is a joke and does not work very well creating a small soft spot light. Be…
This is a clip to replace the Shure 95A29359 when you loose it. It is not a 1:1 copy, it is wider to be more obvious and fit the foam tape you can buy in the store. This does not fit the stow compartment and depending on what method and…
This is for resin printing only! If you want to print it with FDM check out my other honeycomb grid here: https://www.prusaprinters.org/prints/128513-diy-honeycomb-grid-godox-ad200-v1 10°, 20° and 30° honeycomb grid compatible with the…
This is a bracket to mount the Andonstar AD246 or AD249 digital microscope to an InnoGear Microphone articulating arm which has a 3/8 threaded fixing point. I have included the step file in case anyone wants to do a mod. Link to the…
This project is a slide projector for the Godox round head of the AD200 flash. I print with PETG for decent strength and temperature resistance. PLA would probably be problematic. I printed it with full supports, 0.2 mm quality setting on…
I want more colorgels for my AD200 with the H200R round head. So i designt this magnatic version to easily mount self cutted 67mm diameter colorfilters or the round Rogue lightning filters. Print bouth parts and glue 2-4 magnets, round…
This is a case to mount GODOX AD200 PRO on a pole. Although the distance between the head and the main body can be separated using the EC200, I made a simple case to fix the main body to the pole. The pole and the case are fixed with a…
Overview Two part, threaded holder that uses 3x3 mm magnets to snap colour-correction gels onto Godox round heads. Sized for gels cut to Ø 70-71 mm. Compatibility Godox AD100 Pro Godox V1 (all mounts) AD200/AD200 Pro with H200R round head…
A huge thanks to the original author for sharing the source files. It really helps the 3d printing community and allows more people to contribute to a project. I modified the author's Fusion360 file to have user variables so that the…
This is a case to mount GODOX AD200 on a pole. Although the distance between the head and the main body can be separated using the EC200, I made a simple case to fix the main body to the pole. The pole and the case are fixed with a band.…
This is a minor remix of Dan Anderson 's excellent design for the AD206 which has a thicker lens barrel than the AD407. ------------------------------------------------------------------------- There are great tripod screw mounts for…
I created this 3D mockup to aid me in creating a print box to hold this PCB. I designed this model in SketchUp, and I'm providing the editable source SketchUp file here. The box I designed to hold this card is in use on my LowRider v3…
▂▃▅▇█▓▒░𝙳𝚎𝚜𝚒𝚐𝚗░▒▓█▇▅▃▂ Introducing the Remote and Light Switch Holder for the Andonstar AD249 Microscope ! This custom-designed holder solves the issue of a cluttered workspace by providing a dedicated place for your microscope's remote…
As mentioned in my YouTube channel content here: LowRider 3 CNC DIY Plasma Table PART 9 - Control Box from revamped PC tower! ...and here: LowRider 3 CNC DIY Plasma Table PART 10 - MESA torch height control! ...attached are the printable…
Rebuild the model to correct all the mistakes in the original one.
I printed these out of ASA for durability and then cut a piece of 1/8” frost king pipe insulation for the pad. https://www.frostking.com/products/pipe-duct-insulation/rubber-insulation-tape Print settings with my 0.4mm HF nozzle were…
you can convert ipad 2 screen to monitor use m2.5 screw used this; https://www.aliexpress.us/item/3256802973772497.html?spm=a2g0o.order_list.order_list_main.11.19aa3d12JhulGY&gatewayAdapt=glo2usa4itemAdapt parts are splitted for smal…
Optional: Transfer the Stock LED Lights You can reuse the two LED lights from the original base if you’d like: Remove the two screws on the stock base. Unsolder the four wires from the control board and unthread them out. Feed the wires…
Remix of loopj's design. It's a bodge remix, could use some better modelling but good enough for my needs. When printing, use Gyoid infill pattern for better diffusion of light. TinkerCAD available at…
Allows an umbrella or other shaft-based light modifiers to mount directly to one of the two ¼-20 tripod points on an AD200. I've included the “short” version in case somebody wants it, but the one marked “long” is a big improvement in…
This requires 3x4mm+1x3mm banana plug, which shoud not come with any grip.
MK2 ring light for my digital microscope. I have evolved the MK1 design into a better more robust ring light, the screws that are used to hold on the lens cover now serve as duel purpose to attach the ring light. The bottom section is…
In these days: What does not come with a tool or machine or microscope AND charger, remote control, accessories, cables, plugs, adaptors? In order to keep everything aligned in one place I designed this thing. 3 main boxes: a) obsolete…
This cover is designed for the KORG NANO2 SERIES. It may also be compatible with first-generation KORG NANO devices. The cover protects your controller from dust, dirt, and minor impacts while not in use and is made to work perfectly with…
Print settings Choosing the Beam Angle This model uses PrusaSlicer's Honeycomb infill to generate the optical grid. Honeycomb grids can project wider or narrower beams depending on hexagon size and depth - see photos for reference (shot…
To protect the microscope objective Category: Gadgets
Another Mod for my new Microscope: The org. keys for manoeuvering through menus or adjusting functions was NOT readably at all. Black on black! What a pity! So I took the microscope apart, measured the keys part and redesigned it to this…
If you have a Nomad23 from DX Engineering, you need this tip to hang your wire or whatever. Pictured with polystealth wire, little fingers to hang onto that wire while you're working your favorite portable contacts. Prints easy, no BS,…
This adapter allows for using a 5 Generation iPad with a Bluetooth keyboard designed for an iPad 2. This adapter receives the iPad 5th Generation and mimics the shape of the edge of an iPad2 so that the iPad 2 can be placed in a Bluetooth…
Quad 5" props 30.5mm*30.5mm ( Holybro Kakute F4 V2 Flight controller Atlalt HV 25-600mW 40CH VTX Tekko32 35A 4 In 1 Blheli 32 ESC) HOBBYWING XROTOR 2405 MOTOR Foxeer Falkor 1200TVL 1/3 CMOS Mini/Full Size FPV Camera Print Settings Printer…
Just a quick and easy printable holder to store the microscope remote control on top of the vertical beam. No support, printed hyper fast at 0.3mm layer and 150% speed on a old MK3S. Print it with the rectangular opening on the plate.
The stock AD-E2 mount is not directly compatible with the EC200 extension cable head, so this adapter allows a secure mounting. Should be compatible with other cold shoe devices (not tested) Printing tips: No supports required Infill…
Simple replacement battery cover the the Godox AD200 and 200 Pro, Will also work on the Pixapro version as hey are the same product. This should work in and filament. I used PLA
This is my first project. I prepare a box for all spare parts added to Andonstar AD246S-M. It is based on Gridfinity box 3x3x8.
This cover is designed for the KORG NANO2 SERIES. It may also be compatible with first-generation KORG NANO devices. The cover protects your controller from dust, dirt, and minor impacts while not in use and is made to work perfectly with…
Rebuild the model to correct all the mistakes in the original one.
I designed this model in Onshape with the primary goal of freeing up space on my desk by securely mounting the DAC. The mount is intended to be screwed into the desk for a stable and permanent solution, but for those looking for a more…
Filtr je sestaven ze dvou částí - těla a vnějšího krytu. Na těle filtru je namotaný proužek dámské punčochy a překrytý vnějším krytem proti uvolnění. materiál: PLA teploty: tryska 210, podložka 60 st. výška vrstvy: 0,2 mm podpěry:…
This is rough first draft of a two part slide case for the Lenovo Tab P11 Gen 2 . Cut out on bottom for home screen gesture (swipe up from bottom when mounted horizontally). Designed to work with the VIVO VESA Quick Release Adapter…
