Liczymy pasujące modele…
I was making a modification to the EVA 2.4.2 toolhead that allowed the use of a Rapido UHF hotend. I tried to find a STEP model for it online but after ~30m of searching, I couldn't find the ultra high flow (UHF) variant as a model. I…
Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…
Release Client! This is the final update unless users come across any issues. If you have one working, you do not need to upgrade. I have run approximately 100 hrs of filament through it at this point in this configuration. Feed tube…
I changed my hotends to Phaetus and needed to lock rotation for easy nozzle change. The adapters are confirmed to work with TriangleLab as well. Compatible with both types, ST/HT. Fits between extruder body and hotend and uses the…
Phaetus Dragon HF Mount for Stealthburner Why not use the P-DRG Mount? I just finished my v2.4 build, and my set had the HF variant of the Phaetus Dragon included. The obvious goto was to print and use the standard P-DRG mount since it's…
This is a DragonFly BMS mount (from Phaetus hotend) for EVA v.3, include nuts and inserts versions. NOW for the 6 and 7 fins version, from Phaetus DragonFly BMS. UPDATES: · 2023/05/25 The 7 fins version is about 2mm longer, so I made that…
This is a Glyphid Praetorian from Deep Rock Galactic. The model is from the game, but edited to allow for printablity and Multimaterial. -I do not own any rights to this character or anything related to the game. Everything goes to Ghost…
no supports needed. i printed it with pc blend by prusa.
Discover the Aether Karambit Knife, a futuristic 3D-printed karambit designed for collectors, cosplayers, and enthusiasts. This captivating model boasts unique features: Striking sci-fi fantasy design Three-color print or single color…
I recently switched to Voron Stealthburner toolhead from Voron Afterburner. After that switch, I started to experience clogs and I assumed the clogs were a result of insufficient cooling of the Dragon hotend. Despite using a fan that…
Praetorian Guard armor the mandalorian s3e7 + helmet made by https://www.printables.com/@ccary17_761396
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
It was hard to get good reference images for this. I'll probably update it if I find some better images 4/14 - added a v2 with more details 4/19 - v3 more details & filled version
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
EVA 3 compatible mount of BigTreeTech EBB42 Toolboard and Phaetus Apus extruder. BOM Note: Some screws can be salvaged from the Apus itself EBB42 Item Qty Description M3 x 4mm Heat Inserts 13 6 for extruder mount, 7 for toolboard mount M3…
Combined the Voron Dragonfly BMO Stealthburner printhead with files from the Filametrix project. Tested/working on my Voron 2.4R2.
Aetheria Sceptria is a sculpture that pays homage to the divine ethos and humanistic spirit of ancient Greece. Her towering chignon exudes majesty, while the fluid drapery of her himation cascades like whispers of the Aegean wind. In her…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
Remix of stew675 's beacon bracket, added air duct for stock and Phaetus Conch hotends M3 nuts (fan mount ) and m3 inserts or m3 square nuts (beacon mount ) required to make it work Normal supports needed , all print settings and material…
Stealthburner printhead for Phaetus DropEffect XG hotend
The improved fan duct is a remix of a very good upgraded fan duct from KalleKnall. https://www.printables.com/model/39679-prusa-mk3s-and-mk3s-fan-duct-with-pinda-support. I've modified it so it will fit as a direct replacement for the…
No print support! https://www.phaetus.com/en-us/products/dxc-extruder The motor is not included as it's meant to be a drop in replacement for the Creality K1 extruder. Needs to be 12t gear (the common motor for Sherpa and Orbiter uses…
I needed to space out the Phaetus BMS hotend a bit on the Ender 3, so the silicon sock would be able to fit onto heatblock while still clearing the bottom wheel mount on the X gantry carriage. This part slips over the hotend standoff…
Update 10.11.2022: Now the fan has two fixing spots and also its a bit better positioned. Also the airflow of the heatbreak fan is optimized. Hi, i builded my own adapter for a sherpa extruder with an phaetus hotend because i could not…
Would like to thank Okef256 for the original model. It doesn't seem to get much attention, but it is great. Modifications: Modified mount to attach to Ender 5 mount plate instead of linear rails. Added hex holes to allow install with 3mm…
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE MINI AETHER is a mini version of our Aether hypercar. SIZE / WEIGHT: Total assembly: Roughly 85 x 40 mm Filament: We used roughly 20 g of filament using 5% infill. MAKEABLE…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
All the pieces of the mold can be printed without supports with any material that you have available. You need 2 x M3x30, 5 x M3x20 screws and 7 x M3 nuts. The silicone sock should be made with high temperature silicone. I've provided the…
I designed this model for my printer. I tested a lot of versions and deleted all weakness. My final version is ready to go just paint correctly supports. After print, put inserts and then assembly whole thing. You will need: some M3…
This is a simple revision to the StealthBurner Print head for Phaetus Rapido 2 to fix the next-G.The neXt-G is the same overall height as the Rapido but does not taper towards the top. I just made the model fit the neXt-G width. This is…
These files will help when converting from the standard E3D Hotend to the Zodiac Phaetus BMO Dragonfly hot end on a Prusa MK3S+. Note this is not for a regular Phaetus BMO Dragonfly due to the addition of an anti-rotation feature near the…
Gix as depicted in the Brother's War set. I made a variation that has the Phyrexian Symbol like early depictions.
This is a part of our Pactum Aeternum project! Subscribe to the pre-launch page on Kickstarter: https://www.kickstarter.com/projects/dakkadakkastore/pactum-aeternum?ref=2ulh9l More details: dakkadakka.store/pactum-eaternum There is also a…
It is remixed from Github Klicky-Probe/Printers/Voron/v0/v0_STL at main · jlas1/Klicky-Probe repository and credits goes to them. Any additional guide for installation please refer to the github.
UPDATED VERSION: I did a mistake and uploaded my old Prototype. Now you can easily load the Filament. Simple Adapter for my Phaetus Dragon ST Hotend. I use this Hotend with custom Dual Fans like “Butterfly”. I used this build:…
This is my rendition of the AETHER Reality stone from Thor: The Dark World, I made it after not finding one that I liked, others didn't have stone textures, handles that didn't move or were the wrong scale, I believe this to be as…
Edit: added zero-g diffuser for the cowl with the logo. based on the voron diffuser, all measurements match. printed and tested, let me know if there's any issues and I'll fix asap.…
Title says it all. A tool steel nozzle stripped the threads of my CHCB-OT hotend, and I really didn't like the original Creality hotend. Relocates Nozzle MCU Board and heat break cooling fan. Currently working on a new…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
If you want to install the Phaetus Dragonfly hotend, you need a bit different fan duct. For that reason, I have created this one Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution:…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
The model is based on the MK3S printable parts (R6) and it ensures one handed nozzle changes by blocking rotational force, designed exclusively for Phaetus Dragon HF or Phaetus Dragon normal flow hotends. It has been also printed & tested…
The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…
Several parts were merged in order to save weight on these parts of the EVA 3 printhead. Hence, it looses it's modularity, but also sheds lots of weight. Not including the no longer needed screws and heat inserts the weight went down from…
For the Phaetus APUS 2 extruder Use M3x6 screws no print support ------ Support me on Patreon ! https://patreon.com/squirrelf3d or buy me a coffee https://ko-fi.com/squirrelf3d https://www.buymeacoffee.com/squirrelf
Modified so the part cooling duct and extruder cover/fan mount is 8.3mm lower to suit the standard Phaetus Rapido and volcano hotends. Only the version without LED mount provisions is provided. EDIT: By request, have uploaded a 3mm version.
this isn't screen accurate (the skirt around the bottom isnt quite right) It will give you something that will still look the part of a shelf. 200mm inside ear to ear measurement at 100% (so just slightly smaller that Din helmet)…
Aether UPS 5V 3A 15W Case with: 2 x USB-C 1 x XT30 Category: Containers
Jelikož už mi nebavilo pravidelné hraní si s teflonovu trubičkou v origo hotendu, Mosquito clon a následně E3D V6 hotend kolikrát zase přinesly jiný problémy… tak jsem si k dalšímu pokusu vybral Phaetus Dragon BMS Hotend.…
A fan duct for Phaetus Rapido which utilizes a 40mm fan. Has a locating lip near the bottom to prevent upward movement due to the heat sink's conical shape. Category: 3D Printer Parts
!!! PLEASE NOTE - THIS MOD IS ONLY FOR THE 7-FIN, HEAT INSERT MODEL !!! Great mod by @themacboy - appreciated and thx for sharing, and ofc not possible without the whole EVA thing going on before that. After the initial install (of std…
I created this simple direct drive out of frustration with the substandard quality of my Creality Ender 5 plus. This is to be used in conjunction with the new hot end, the “Phaetus Dragon ST. I made it so it fits easily using most of the…
Hello fellow makers, I made a fan duct for my Phaetus Dragon hotend, dual 4010 part cooling, BLTouch support which fits perfectly on the Ender 3 gantry. What you need: Phaetus Dragon Hotend 1 or 2 4010 Blowers 4010 cooler (1 used a…
If you want to support my work, buy me a coffee RatRig V-Minion reverse Bowden w/PC04-M8 by dragonfly BMO 2 cap head M6x12 2 T-Nut - Drop In for 3030 - M6 1 Bowden adaptor by Phaetus dragonfly BMO
I could not find any nozzle cases that fit the Phaetus and off-branded nozzles so I remixed Doug Joseph's nozzle boxes to fit these different nozzles. Printer settings are the same as the original. 10% infill on lid 15% infill on base 2…
Direct drive Phaetus Taichi and EBB CAN 42 mount for Sapphire plus SP-5. I used Sailfin extruders, since they have smallest footprint. Files can be found here . You will need two of them, normal and mirrored. Two pieces of bowden are…
I made a bunch of Phyrexians for Spooky Season If you want to help me keep making free models or to tell me what I should make next please check out my Patreon Category: Games
Figure size: 25,22 x 25,33 x 44 mm Use your own stand or a pre-made stand in my models Supports are necessary Illustrative pictures & gifs Possible re-make for your own, non-commercial purposes My private AI model without textures is…
I got a partially kit of a Prusa mini From a friend but some parts were missing. First and foremost the hotend. So I came up with a quick design to mount one of the hotends I had laying around to my machine. In addition to the "original"…
!!!Warning!!!This model is still in progress!!! A shroud witch works very welll with hotend Phaetus Dragonfly BMS, 5015 fan on Ender 3 V2 Neo with have magnetic mount round and cubic. Print Settings Printer brand: Creality Printer:…
This is a remix of the Bear Exxa extruder cover that adds a small peg that prevents the Dragon hotend from turning. This is achieved by a the addition of a small peg that locks down into the structure of the dragon hotend and holds it…
v2.1 -Smoother transition for air flow to heatsink v2.2 -Smoother transition for air flow to heatsink -Parts air cooling direction is more under nozzle Print settings: Material: ASA/ABS Layer Height: 0,2 mm Infill: 40% Wall Count: 4 Solid…
Where she is going, nobody knows. A little bit of a memorial to the passing of Leiji Matsumoto. May he rest in peace, being one of the giants of manga. Find a PLETHORA of models from all walks of cuteness at https://www.patreon.com/capsule
ReadMe.txt Andruckplatte für Schaerfgeraet Anwendung: Für das Schaerfgeraet (Sharpening Jig) https://www.thingiverse.com/thing:3790668 habe ich eine Auswahl von Andruckplatten sowie eine 1-Teilige Laufrolle designt. Die Rolle ist recht…
Variation on this model so it will fit the Phaetus Conch hot end.
This is a remix of the "FANG-oz-40mm-MicroSwiss" fan duct from thing:2763931 by ozfunghi to work with a Phaetus Dragonfly BMS hotend. If your hotend is from Trianglelab instead of Phaetus, that should be exactly the same. I've added some…
I do not recommend that you use a Rapido . It's a great hotend and has performed well, but it's just better to stay in the developed ecosystem and save yourself the headaches of a custom job. I like what I have but I wouldn't do it again.…
Remix of this remix of the MiniMe 5015 fan duct, modified to accept a slightly thicker blower fan because I bought this one from DigiKey which is actually about 15.8 mm thick. Also added a brace between the mounting holes to keep the duct…
Modified for better airflow and more rigid.
I wanted a quick test print that shows if a printer is ready to print, fast to print and is easily removable from the bed. So I made my own. The Fasenplaettchen test slanted edges (a little), bridging (V3), first layer quality and flow…
!!Warning: This has not been tested with the stock hotend, it is made for the Phaetus Dragonfly bms. The DD setup might be a little heavy if you don't have a sturdy x axis or a dual z rod. For assembly you will need 7x7mm M3 screws. I…
ReadMe.txt Anlegewinkel Schaerfgeraet / Adjustment tool for sharpening jig Anwendung: Anlegewinkel zum einstellen des Steckeisens im Schaerfgeraet Verschiedene Winkel: 20 / 25 / 30° Material: PLA Schichtdicke: 0,2mm Füllung: 100% Farbe:…
Heatsink Fan Mount Ducted Square modified slightly to fit The Conch Qidi Plus4 hotend with Stew675's carrier plate.
Updated model to improve print quality and usability. Very simple idea. If you're struggling to put switches through a plate and into a PCB, for example if you have a plate made of a soft material, then this tool will help support the…
I've tried many printed end effectors for my heavily modified Anycubic Kossel Linear Plus, but none really worked for me, so I decided to make my own. This model lets you use the rigid mount of your Phaetus Dragonfly BMO (just unscrew the…
Remix of Gulsifer 3010 Rookery Shroud with shorter air ducts
Just a re-visit of the holder for the rapido now compatible with the dragon UHF too
I wanted a belt clip that I could quickly get my leatherman wingman out and in without fiddling around. This is my second version but I'm very happy with it so far. I haven't painted it yet but will try to make iit look like its made from…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
The model is based on the well known "Delta P Fan Duct" and it ensures one handed nozzle changes by blocking rotational force, designed exclusively for Phaetus Dragon HF or Phaetus Dragon normal flow hotends. It has been also printed &…
This is an Mount and FanDuct for the Phaetus TaiChi “2in1out" Hotend and it utilizes 2x 5015 fans with direct drive capability. It is designed to be used with either an single Bondtech LGX Lite extruder for the primary filament and an…
A mount which allows the Orbiter 1.5 and BLTouch to be mounted to the creality Ender 5 stock carriage (and other creality machines with the same carriage plate), aligned for the Phaetus Dragonfly BMS (the best all-metal hotend upgrade…
I remixed the great Satsana 5015 Ender 3 V2 for Phaetus BMS Hotend or similiar part to work on an original Ender 3/Pro and added an EZABL mount. Print it with the side that mounts to the carriage down on the bed and use supports only…
I had no intention to publish this model & it was for my machines but by request here is the first version. It's printed from PETG & after 300+ hours with no problems I decided it could be useful for others. The Dragon HF is known for…
A mount for the Phaetus Dragon UHF for hartk's AntHead toolhead, as I wasn't able to find one and the one for the Dragon Ace makes the UHF stick out by 3mm.
Modified the existing x carriage mount to fit the Phaetus Dragonfly BMS. To be used with 3010 fan and M3 heat inserts.
11 Aug 22 - I've since made a better version, based on the remixed Delta P X2. It uses a modified extruder cover/fan mount and part cooler but keeps the original internal design intact.…
I remixed Satsanas Ender 3 fanduct with an 5015 blower fan to fit the Ender 3 V2 X-Axis gantry and my Phaetus BMS Hotend because it is wider (24mm) than the standard Ender 3 V2 hotend. Now the space between the walls where the hotend sits…
Mit hilfe dieses Adapters könnt ihr das beschriebene Hotenend problemlos auf den Vyper (Standardkopf) von Anycubic montieren. 3D-DRUCKEINSTELLUNGEN Slice 0,1mm 60mm/s PLE
This is a remix for the excellent remix ( Thingiverse - Digital Designs for Physical Objects - Thingiverse ) of Elescar featuring the same thread and bowden collet insert dimensions - just with 3 arms instead of 2. 2 arms caused some…
Use this if you want to install a Phaetus Rapido on your Tiny M or other sailfin extruder.
PDF with printing and assembly instructions included! Note: Only suitable for 300x300 build plates or larger.
This is one of the infinity stones from the Marvel Universe, built to allow for some electronics to fit inside to glow red through some plexi glass. Modeled after the Hot Toys toy. Make sure you print 4 of the Pillars and enjoy! Category:…
This is the gear inside of the Phaeton trunk locking mechanism that usually breaks. modeled after the original part with high accuracy.
The AETHERBEAM is a fully 3D-printable, retro-styled bicycle headlight designed for modern performance and sustainability. Featuring a rugged, customizable housing, USB-rechargeable electronics, and eco-friendly packaging, it combines…
Originally published here: 3200 Phaethon scaled one in eighty thousand by tato_713 - Thingiverse I did not render this model, I just soften and simplified to look less "poly", using the model available in the DAMIT website. The file's…
Updated dragon mount to accommodate the longer meltzone provided by the Mellow v6 pro adapter
Překopal jsem své předešlé pokusy do podoby, kdy jde jednotlivé části postupně demontovat a ty jednoduše upravit/vyměnit. Možnost jak bovdenového, tak Sherpa extrudéru. Dva vozíky pro osu X - mnou standardně používaný s integrovaným…
