P
Printableslook.for
BBQ zone (beef)
Funny BBQ sign. I made it from PLA. Filament change at layer: 16, 21, 26. Dimensions: 195 mm x 130 mm x 6 mm. The diameter of the holes in the corners are 3 mm.
- Pobrania
- 119
- Polubienia
- 28
- Ocena
- 5
Wyniki wyszukiwania: beef
Liczymy pasujące modele…
P
PrintablesDarrin
Tall and Beefy Lack Enclosure
More of a taller and heavy duty version of the lack enclosure. Features adjustable bearing mounted barrel hinges for easy door removal along with magnetic latches, integrated filament mount, side walls are attached with magnets for easy…
- Pobrania
- 90
- Polubienia
- 24
- Ocena
- 0
P
Printablesprimate
Beefy Voron PTFE bearing mount
Aftey a year my mount snapped so I decided to make a beefier version that is 1 mm larger on the 3 sides.
- Pobrania
- 51
- Polubienia
- 7
- Ocena
- 0
P
PrintablesN8finch
Beefy Ender 3 Filament Holder
Print it using supports from bed. And you will need two extra screws and two T-slot nuts. In my picture it shows two unused holes on top, I figured out they are too close to the other ones on the same corner. So I covered them but I could…
- Pobrania
- 32
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAero
Beefier interlocking, magnetic, stakable project trays
Re-did links, no supports, and used one 12mm x 2mm magnet
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 0
P
Printables
MCXish folding brace with extra beef
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
P
Printables
OG Star Tracker V2 Mods (Single piece/beefier gearbox, logo doors)
Updates: 2026-04-30 Added STEP file. Its gigantic because it has some of the original STLs in it also. 2025-05-10 updated v1.1 of Gearbox-part-1-2-Combined (with and without letters) enlarged hole for the intervalometer port to 5.6mm. The…
P
Printables
Beefier towel holder with no support
Loved the original concept, simplified it by making it assemble via 5 x M2.5x10 self tapping flat head screws.
P
Printables
Beefy Clamp-On Laptop Stand
Beefy laptop stand I made for my engineering laptop at work. You will need to print 4 parts total: x2 Laptop_Stand_1, x2 Laptop_Stand_2 This was designed to fit a large Dell laptop, but since the two stands/clamps are separate you can…
P
Printables
beefy WW (WristWatch) extruder toolboard mount for PG7 gland
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
P
Printables
Beefy Bowden Filament Guide MK3S
Printed with maxed out walls for myself and has held up great
P
Printables
Playstation PS5 Stand - Beefed Up
I love Matt-G's design, but the thin "hook" on the right side was a problem. As you can see in the attached pic, it failed to print at low resolution. So I opened the .step file in FreeCAD and beefed it up. Now it works GREAT! This remix…
P
Printables
Ender 3 Pro Beefy Y (9mm belt/60mm motor/double shear)
This is a mod for the Ender 3 Pro (and probably also V2) to improve Y axis performance using: 9mm GT2 belt Longer stepper – up to 60mm Double-shear bearing to support the stepper motor shaft (optional) BOM and assembly notes: 16T GT2…
P
Printables
WWBMG beefy motor plate
Literally added some extra mass so it would benefit more from extra walls with some more exotic material like PPA-CF. I noticed the original design still flopped around a bit even when printed from PC-PBT-GF20, but this one seems visibly…
P
Printables
QNAP 10in mini rack bracket (beefy)
10inch Mini Rack mount for a QSW-M2106PR-2S2T. 4mm thick for back heavy QNAP switches. I printed this in ABS for durability bit it will likey work better in PETG or even PLA (watch out for how hot your room where your rack is at), 4 wall…
P
Printables
Prusa MK3 Y Axis beefed up rod holder
Part is no longer symmetric, you need to print it mirrored as well. Recommended settings for Prusa MK3S printer parts apply. Therefore orange PETG, 20% gyroid infill, 0.2 quality setting.
P
Printables
Beefy Ender 3 Filament Holder
Print it using supports from bed. And you will need two extra screws and two T-slot nuts. In my picture it shows two unused holes on top, I figured out they are too close to the other ones on the same corner. So I covered them but I could…
P
Printables
Beefy Din Rail Mounts for VORON, Octopus 1.1, Raspberry Pi 4, 24V and 5V Meanwell PSUs
BEEFY DIN RAIL MOUNTS These are Completely Overbuilt! They Require 1 purchased part - Link Below I made these mounts to solve the below issues from the Voron 2.4 r1. BOM STL files Will work on any 35mm Din Rail Mounted Setup These are…
P
Printables
Beefy Laptop Stand
Big & beefy laptop stand that has the same height as my screen. Print without top & bottom layers and honeycomb infill to get the result from the pictures. I used 18% infill and 0.6mm width
P
Printables
BZI Pin jig (Beefy Z Idlers)
This is a simple jig used to cut the 5mm rod required for the pins mod found here: GitHub - clee/VoronBFI: Beefy Front Idlers (for Vorons) This jig will produce: -22mm (4 required)
P
Printables
Beefy Hinges for Voron 2020 Frame Door
This are beefy door hinges to attach a 2020 doomcube style fridge door. This is an improvement on my first design where I borrowed heavily from WhoppingPochards clicky clacky door hinges. It is designed to use the following hardware based…
P
Printables
MCXish folding brace with extra beef
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
P
Printables
Gridfinity beefy USB charger
A remix of "The Gridfinity USB charger stand" for bigger chargers and 1x2 gridfinity squares
P
Printables
Beefy Headphone Hanger
Do you have that kind of friend who asks you for a headphone hanger and calls you week later to tell you he brake it? Well now you can gift him a one that is basically on steroids There is two models one has a tolerance of .1mm for the…
P
Printables
Siboor Trident aux fan - Beefier Legs FIx
made the legs thicker and stronger, added optional way to screw in 2 m4x40 screws in the center legs to increase strength even more! ( not needed though ) rounded of some of the corners to be in line with the other curves scaled object up…
P
Printables
QUICK-CLIP : Extra beefed up, Heavy-Duty Reinforced Buckles
This might be overkill but, I made the walls of the buckle thicker by turning them into a bevel from the bottom of the buckle to the top of the wall. I have no Idea if any of those buckles ever broke this way, but I figured I'd make the…
P
Printables
Beefy Back Scratcher
Pretty solid the more perimeters that are used. Size limited by my Prusa Mini. I printed with ASA, but use whatever filament you like although TPU might not be ideal.
P
Printables
BFI Double helical Gear Mod (Beefy Front Idler)
Double Helical Gear Mod on BFI (Beefy Front Idler) It has been modified based on Diyshift's BFI Gears user mode I made it to deliver better torque and prevent it from being twisted than normal gear The single-helical gear was found to…
P
Printables
Prusa i3 MK3 Y-Axis bearing strap - beefier remix
A simple remix of https://www.thingiverse.com/thing:1819779 to make the screw tabs a bit beefier. For me, they seemed to work loose over time and after repeated tightening the screws started to slip. This was simply an attempt to…
P
Printables
FLSUN V400 - Beefy Idlers (no built-in supports)
A beefier version of idler holder for V400. See original model for more details
P
Printables
Voron Daylight on a stick LED mount for BZI (Beefy Z Idlers)
The standard Daylight mounts dont work with Clee's Beefy Z Idlers. (BZI) so I made up a quick replacement.
P
Printables
Biltong or Beef Jerky dry box rod rack
I printed this in PLA but i dont use any heat in my box. If you plan to use heat better with PETG.
P
Printables
Beefy pull knob for drawer or door
Needed a knob for my 3d printer cabinet. Sized to fit a 4mm diameter screw. Prints quickly and is robust.
P
Printables
Beefy Hook
A simple thick hook designed to use medium command strips or a screw ( or both to keep it from twisting). I usually lay it down flat on its side to print.
P
Printables
BFI (Beefy Front Idlers) carrier with more screw head size
These are replacement front idlers carriers for BFI 2.4. Check both to see which has the better fit Two Files: BFI-carrier-big-x2: Increases all the head screw dimensions by .5mm bfi-carrier-head-height-.4mm-higher: Increases only the…
P
Printables
A Beefier Mouse Wall Holder
Printed in Creality Black PTEG on a K2 MAX. No special settings; printed upright, no supports. Screw holes designed for #6x1" Phillips Flat Head wood screws.
P
Printables
MK6 Beefy Spooler Back
I beefed up the MK6 Spooler Back for a project i am working on. Added more supports to the main spool hub. This isn't needed for a standard MK6 Recreator3d.
P
Printables
Creality K1 / K1 Max / K1C beefed up chain + integrated bowden clip
A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…
P
Printables
Biltong Hook (Beef Jerkey Hooks)
Use these hooks to hang up your meat for making Biltong (Beef Jerky)
P
Printables
Raspberry Pi 4B Baseplate, 4010 Fan Mount & Beefy DIN Rail Mounts
This encases the entire bottom and side of the Raspberry Pi 4 board with an opening on the bottom for easy removal of the microSD card. Utilizes two low profile DIN rail mounting brackets for a sturdier and secure installation of the Pi 4…
P
Printables
Beefy Armed Alexander the Great
My friend was looking for a gag to add to a add-and-pass trophy and asked about 3D printing something for it. I showed him the Beefy-Arms on Venus, bunnies and sharks. He countered with Alexander the Great. Now I can't see the sculpture…
P
Printables
Beefy Tanq-S DJI 04 Dual Antenna
I was having issues with the original Tanq-S mount for the 04 stock antennas being too thing and ripping. So I made a beefy version of it! Still works with the ELRS antenna mount as well as the 04 air unit mount ( which I also remixed to…
P
Printables
Shower Rail Hook - beefed up
Building off the support hook by Slash66, I needed a bit beefier version to print in TPU (better for shower). I made it thicker, and added another support since TPU looked sad without it. We use this to hold loofas and small things to…
P
Printables
Filamentcutter For Dragonburner/Rapidburner Orbiter V2Levered (more beefy)
The lever arm is longer, providing additional leverage The lever's width is wider, providing more material around the fulcrum (a weaker part of the original design) After about 1000 cuts it would break. Widened holes on lever for screw at…
P
Printables
S Hooks - Thin and Beefy Edition
Just a small and a more beefy version of an S Hook that can be used for many things.
P
Printables
Beefy Monster Tail Rainbow Loom
I used https://www.printables.com/model/140094-monster-tail-rainbow-loom as an inspiration This remix just has stronger thicker loom pins, as my kids kept breaking them Printed at .16mm layer height with a .4mm nozzle and .6mm line width…
P
Printables
Beefed Up Electronics Top Cover
Added ribs and thickened edges for a more robust top cover
P
Printables
Anthead Leafcutter Beefy Spring
Uses an extruder spring, i didnt have any filametrix springs and i haad heaps of these, so i modified the files to adopt.
P
Printables
Belt clamps adapted for TorxFighter GE5C and Beefy Idlers on Voron ChaoticLab Carbon Fiber Bracket Kit
This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…
P
Printables
Beefy Wire Duct for Voron 350mm (Ryandam Remix)
These cable ducts have been re-created to accommodate an inverted electronics setup on a 350mm Voron. They are also thicker all around to prevent breakage which I found happened a lot with the original design. The slots have also been…
P
Printables
Neptune 4 X Axis Webcam Mount Beefier
I won't write a description, and YOU CAN'T MAKE ME!!?!?!?! Meant to mount to the left (right if you mirror it) stepper motor cover so that the webcam moves with the extruder, great for auto fail detection. Huge thanks to the original…
P
Printables
Enderwire Beefier, Square Nut Y Idler
🚀 Quick Spotlight: EnderWire Beefier Square Nut Y Idler If you're building or upgrading a Voron-style EnderWire/SwitchWire printer, here’s a golden opportunity to beef up your Y-axis. Enjoyed the model? Help me save up for another Voron…
P
Printables
Beefy Replacement Shelf Bracket Peg for Cheap Particleboard Shelving
I had lost a couple of the dinky clear-plastic pegs, for holding the shelves on a few small cheap-particleboard shelving units, and a big bookshelf I own, So I took it as an opportunity to make bigger/sturdier ones to print and use…
P
Printables
OG Star Tracker V2 Mods (Single piece/beefier gearbox, logo doors)
Updates: 2026-04-30 Added STEP file. Its gigantic because it has some of the original STLs in it also. 2025-05-10 updated v1.1 of Gearbox-part-1-2-Combined (with and without letters) enlarged hole for the intervalometer port to 5.6mm. The…
P
Printables
PCIe Card Stand (Beefy version) w/ Mounting Holes for Desktop Display
I plan on displaying some bigger GPU's such as the HD5970 dual-GPU graphics card so I decided to beef up the original version of this stand. Plus I added a couple screw holes for mounting to a surface for a more secure/permanent…
P
Printables
Rancilio Silvia Load Cell Mount (beefy)
Heads-up: I kept tolerances quite low, so no guarantees that this will fit your machine. Pause at the beginning of layer 12 to insert magnets, or use the ‘no_magnets’ version with double sided tape. I inserted 20 magnets, which is a bit…
P
Printables
Beefy Y-motor holder MK3S(+)
Redrawn from scratch from original Prusa holder, though inspired by the Juiced Y-motor holder . Features: 1mm from frame to avoid vibrations 2mm to the right, to allow for reversed pulley mount (works on stock as well as custom steppers)…
P
Printables
Beefalo (Don't Starve)
Beefalo is a neutral mob in Don't Starve and Don't Starve Together video game
P
Printables
Beefy Cat
🐱💪 Beefy Cat - The Swole Feline You Didn’t Know You Needed Move over housecats — Beefy Cat is here to flex his way into your heart and your display shelf. This unapologetically muscular kitty is the ultimate mix of cute and comically…
P
Printables
Beefer K1/K1C/K1 Max/K1SE Drag Chain Case Mount
I kept having issues where the bottom eye would snap off due to the layer lines. Since the OG model is printed with the back of the model to the bed, the layer lines cause a weaker join between the chain eyes and the rest of the body.…
P
Printables
Beefy Simple Hinge by Design8Studio - for using 2mm coat hanger wire as the hinge pin
Beefy Simple Hinge by Design8Studio - for using 2mm coat hanger wire as the hinge pin. This is compatible with the earlier version , yet is thicker, stronger, and setup for 45-degree printing to avoid the layer-line-adhesion issue for…
P
Printables
BEEFY Side Rails / Handles for the TYT TH-9800
I didn't like any of the options I could find online, so I drew up my own side rails for the TYT TH-9800. The radio is centered, and the rails extend far enough in the back to protect your antenna connection. Works great on a desk,…
P
Printables
Inline Filament Buffer - CFS AMS Helper - ECAS Fittings + beefed up
this is a remix of www.printables.com/model/1190380-inline-filament-buffer-cfs-ams-helper-beta-version to use ECAS
P
Printables
DIY Beef Jerky Gun - Cal 50mm
Inspired by Pompano Brownies Big Bertha DIY Beef Jerky Gun on Thingyverse… I made my own simpler version using : 1x normal silikon gun for 50mm diameter cartridges 1x 21,5cm piece of a waterpipe 50mm x 1.8mm (both bought in a hardware…
P
Printables
Carvera Spindle Fan Beefy Version
Revised Carvera Spindle Fan by Fae Corrigan. This version has slightly thicker blades plus other improvements.
P
Printables
2015+ WRX AP Mount - BEEF
Not really a remix as I didn't use any of the original model itself, just used the thing for inspiration for my own version. Modeled from the ground up to be more robust. This one is Beefier, less shake when on the road, doesn't require…
P
Printables
BeeFan! (Portable and fun!)
This is a portable and fun way to beat the heat this summer! Included here are the files for the honey tiles and there funny carrying case! NOTICE: This print does not include the carabiner needed to clip through the stinger! also there…
P
Printables
Security belt car for dog-cat BEEFY
It's a bit bigger for faster crashes. I don't like 60mph poodle missiles.
P
Printables
Beefy Nozzle Scrubber & Decontaminator for LDO Voron 2.4 bed
More robust version of the standard bedstop to avoid long-term deformation, compatible with LDO kit bed spacers
P
Printables
OTF Knife with Dual Rail & Beefier Negative Hook & Rounded Slider
3 improvements towards the original OTF Fidget Knife model: Dual rail for handle & blade for better rigidity Beefier & stronger negative hook that is harder to break Rounded slider for easier to flick Oh, and i also removed the holes on…
P
Printables
Reolink NVR (RLN8-410) 1U brackets - beefy with keystone jack
Print twice and you'll need M3x10mm screws to replace the original screws on the sides of the unit.
P
Printables
Bugsy, the beefy bugsbunny
Bugsy doesn’t do “what’s up, doc?” anymore. Now he just grunts and swings a bat. He chews Marlboro and stares down pit bulls without blinking. He got kicked out of PetSmart for "intimidating the hamsters." We tried giving him a plush toy…
P
Printables
beefy bed stop
I liked the side mount build plate stops that Michael_227585 did but they seemed a bit flimsy to me so I made a version I like better. I use m3 x 40 shcs but you can use something shorter for the stop. m3 x 10 works for the mount. 2 m3…
P
Printables
Beefed up gears for Nerf Rapidstrike
These gears are a drop in replacement for the ones in the Rapidstrike gearbox. They are thicker and an uneven number of teeth gives them a more uniform wear, thus increasing longevity. A different gear-ratio will sligtly decrease the rate…
P
Printables
Beefy RepRack Side Wall Mount
The width of the part allows you to butt it right up against the wall to get the right distance It has been beefed up for 3D printing and it has a cutout to allow the spools to get very close to the wall to not waste space
P
Printables
Beefy Replacement Kerplunk Pickup Sticks
A simple yet effective solution for anyone who has lost or wants an upgraded version of the classic game pieces. These pickup sticks are designed to be more substantial than the flimsy modern ones, offering a better feel and improved game…
P
Printables
MeshNRW T114 Case Strapped Body and Beefed Cap
Just the body and the Encoder cap. I also threw in a Logo front plate. Front plate was printed with 0.2 nozzle to come out nice. Get the rest of the parts from the original. Update: I managed to damage the USB port on my t114 so I made a…
P
Printables
Anycubic Photon 5015 blower fan shroud/mount with beefier supports.
The original fan shroud mounting arms for the fan were just too flimsy for my taste so I whipped this up. Using a 4mmx30mm screw with washers and nut for the fan mounting, and 2: 3mmx15mm screws with washer for mounting it to the photon.…
P
Printables
Flush Arm - Beefy Angle Edition
The original's original was aimed wrong, and @Mark579 make it the correct angle. I used it for several months, and LOVED it. But, because I'm stupid and made it out of PLA instead of something more moisture resistant like PETG or ABS, the…
P
Printables
Ender 3 c270 beefier camera mount
Remixed the camera mount for a better connection. Mount taken from https://www.thingiverse.com/thing:3817940 but I am unable to list a 2nd item for the remix source. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
P
Printables
Beefy bowden coupling PC4-M6 (V2.1)
I suggest this combo: -Screw Clamp.stl (Hex or not, your choice) -Insert1mm8.5mm.stl -Clamp Nut3.5mm.stl (Hex or not, your choice) (The original was "Insert1mm8.2mm"-"Clamp Nut1.5mm") STEP OR SOLIDWORKS FILES:…
P
Printables
Better beefy depresor mount for Filamatrix
I had troubles with original beefy depresor mount for Filamatrix https://github.com/IRTrail/G2E-Filametrix/tree/main/Beefy%20Depressor as it wasnt as beefy, so I beefed it up a bit more.
P
Printables
BZI Beefy Z Idlers
Angepasst auf diese Original GT2 Riemenscheibe da sie etwas größer im umfang sind. Bei den Stock Idler (Silbernen ) aus den Kits passen keine 5mm DIN Zylinderstifte nur M5 Gewinde neben bei wurden sie auch noch auf die Richtigen seit…
P
Printables
Smart Effector 5015 Radial Fan Mount (Beefy)
My Sunon 5015 V1 were too shaky on the slim fan mounts from cylon25 and they started shaking a lot and the MagLev bearings started to make nasty noises because of the vibrations. So I designed these more beefy mounts from the ground op.…
P
Printables
Beef Stick Rack 2x7
lightweight, space-saving organizer designed to neatly hold up to 14 mini or full-size beef jerky sticks. With a clean 2x7 slot layout, this print helps keep your snack packets upright, visible, and easy to grab—perfect for dorm cabinets,…
P
Printables
Reaper toolhead topless grille frame, Sherpa Mini mount for TAP and beefed X1C parts
I migrated from A4T toolhead due to crappy fans I had (sleeve bearing was shot after 50 hours of 70C chamber printing on one fan). I got those fans for free, so I did not cry much nor I was gonna order fancy ones from USA from Fabreeko…
P
Printables
Beefier Buttstock for VRGM VR
Buttstock broke two times while assembly, so I beefed it up. Remix from https://www.thingiverse.com/thing:2828833 Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 20 Filament: Generic PLA Category: Video Games
P
Printables
Beefier RatRig Toolhead 1.0 with Beacon Front
This is for the excellent ratrig toolhead v1.0 beacon mods by Ferdinand. That mod worked very well, but this piece broke and I wanted to make a sturdier version. Printed with glass filled ASA.
P
Printables
beefy fs lever mod
I also did a little bit of a interference analysis and rounded a few corners that might have been a bit of a stress. printed in asa 0.1 layer height
P
Printables
Scratch Attach - Printed, Telescopic Back Scratcher v2.0 - BEEFIER - the "I have grandkids" edition!
v2.0 is made to be BEEFIER - it's the "I have grandkids" edition! v1.0 has 1mm thick sidewalls on the telescopic handle, while v2.0 has 2mm thick sidewalls on the telescopic handle. I kept the same outer diameter on the final by (a)…
P
Printables
BFI Double helical Gear Mod (Beefy Front Idler) - 4020 Profile Remix
Remixed to my selfsourced Voron Trident with 4020 profiles.
P
Printables
DREMEL 4000 stand (carpenter's clamp, M4 screw, beefed up)
Printing For stability use the following settings: PCTG or PETG for 0.8mm nozzle: 4 walls/perimeters 25% honeycomb infill for 0.4mm nozzle: 8 walls/perimeters 35% honeycomb infill In the .3mf I actually cut the model into two parts and…
P
Printables
Beefy Xol-Metrix easybladeswitch
The original Xol-Metrix easybladeswitch snapped on me after about two hundred filament swaps. This remixed arm has been thickened for strength. The arm should be printed solid for greater strength.
P
Printables
MadMax Beefy DragonBrick cowl
Modified version of the DragonBrick cowl . I slightly increased the wall thickness around the screws that hold the printhead in the dock for MadMax Toolchanger The overall geometry and compatibility with the original design are unchanged.…