Liczymy pasujące modele…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
A life-sized budgie sculpture I made for my friend. Paint it to make it realistic! Print instructions This needs to be printed with supports due to steep angles on the body and overhangs.
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…
This is based upon a chain of Gosper curves. I had another chain of Gosper curves but I created this different design as part of the latest contest at Printables.com. It is very springy and stretchy even when printed in hard materials.…
A perfect model to test your printers ability to properly retract filament, and test its bridging capabilities. This is done with two small towers either side causing the printer to have to travel across the middle on each layer. If the…
A perch for my budgies. Made for Ø 1 cm gaps in cage bars. I recommend printing with 0.1 layer height.
Tokens to use for the "Die-Dodging" variant for Draftosaurus . You'll need to print 5 of these (one per player; or 10 if you want to give each player two tokens). Print Settings Resolution: 0.2mm Infill: 15% Supports: No Filament: PLA
I would advise to print low and slow. maybe a 0.15 or 0.2 layer height. Also maybe yse the outline file too as the artwork has a couple of holes sometimes due to the model lines being really thin.
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
With this model you can test 6 different distances: 10mm 20mm 40mm 60mm 80mm 100mm Update 1: Added a Material Saving Variant (But this Variant is more fragile)
Reinventing the wheel, yet again. The whole thing is 3 mm deep (z) and each strut is 1 mm wide and 0.8mm deep (so about four passes). The smaller one goes from 5mm to 50mm in 5mm interval; the bigger one goes to 75mm. Having trouble with…
Update: v1.9.6 10-10-25: Test cutouts on the backside are back! Somewhere around v1.8 I left a “*” character in the code while debugging that made them disappear. My “Improved All-In-One Temperature and Bridging Tower” is very popular but…
Fixed a tiny error the Ridgid tool holder model had, added another tool holder model to accommodate the belt clips some drills have (its usually better to shim out the regular size, but I wanted to print the whole thing) Also positioned…
Just a quick test (about 1 hour) for testing the bridging capability of your FDM printer and its settings. Features: -bridge length: from 2cm to 10cm -bridge thickness: 2mm -thin base for better bed adhesion Advance: -you can play around…
I had a co worker ask me if I could make some reusable wedges for him on the 3d printer. Instead of looking for a model that was already availble I descided to design one that has features I would want in a door chock. I printed this in…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Brio compatible bridge set for Lego Duplo compatible pillars Description The provided STLs are for a 150mm straight rail in between and 2 Duplo brick pillars to reach Brios standard bridge height of about 60mm. Feel free to download the…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
This is a completely parametric temperature tower remake from Tronnic's work (rather than a remix). I liked its basic design, but I missed the ability to tweak on parameters, and hence it is! You can: Set the temperature range and the…
RIDGID Tools Double 18V Battery Holder Simple battery holder for storage of your RIDGID batteries while not in use. Batteries slide in and out with ease while maintaining enough grip and stability to keep them secure. The fit is snug and…
PLA / 0.3- or 0.4-mm layer height / 2 perimeters /15% Gyroid In-fill /No Supports Recommend staggering seams to increase strength Note: On 11/20/25 added a slotted version of the “Pull” that can be pressed into place. This makes…
Test your 3D printer's skills with 5 different bridging lengths : 50 mm 75 mm 100 mm 125 mm 150 mm Don't forget the slicer bridge setting on your slicer ! Enjoy & Share your prints with me!
This is a two-part print that provides a close-fitting shroud to replace the stock shop-vac size 2.25" dust collection system with an intake for a 4" dust collector. It requires minor assembly (epoxy or thick super glue) and minor…
Based on: Columbia River CRKT K240XXP Ken Onion Swindle 3.2" 8Cr14MoV Plain Blade, Smooth Stainless Steel Handles, Frame Lock Print parameters: Layer Height : 0.2mm (0.1mm for the blade) Wall : 3 Top/Bottom Layer : 4 Please use heat&bend…
Print in place mini version of the classic push-pin desktop toys. Printed at 0.15 layer height, 0.4mm nozzle, Prusa MK3 PLA standard settings. Haven't printed it yet but will likely be a long print, >20hr.
I was looking for a battery holder for my 18V Ridgid tools, but what I found rely on friction or orientation for retention. So I made one that has a positive retention to use for something more mobile, like pack out cases. The fit is snug…
Each file creates a different angle template 10 for 36°; 12 for 30°; 16 for 22.5%; 20 for 18°; 24 for 15° Use your favorite print settings. Primary use is to set angle arms on a wedgie sled used to saw segmented for segmented woodturning.
This is a bridging test that won't waste loads of material and prints in 20 minutes. 2g of filament gives you about 100 bridging extrusions, each a different length, from 2 to 200mm. Print with 1 perimeter.
Parts I designed for my Ridgid Dustopper Shop Vac Cart. This lets you connect 2" PVC pipe to the wheels of the shop vac and also mount all the accessories and hoses to the cart as well. Please check out my video where I give you a tour of…
Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.…
Additional insert options and reduce wall thickness to cut print material/time by over 50%. Remixed from benjamenjohnson design, https://www.thingiverse.com/thing:3371609 , Naming scheme: # upper/lower (deep/shallow)_alt "#" - Number of…
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
This a fun spinner that can be 3d printed and attached to a pencil to play around with when bored in class or work or just need something to keep you focused or distracted on anything. this design is just as easy to assemble and print as…
Not Affiliated with Ridgid. Fixes the slight wobble in the ridgid table saw fence before you clamp it down. It replaces the two white plastic parts on the bottom of the table saw. If you use it let me know! it's a work in progress. I…
This is a holder for a Ridgid 18V battery. The fit is snug and the back has a slight (5 degree) angle. It is intended to be mounted to a wall or the vertical face of a cabinet. This design has been updated to include a v2 that is looser…
Logos for Ridgid, Craftsman, DeWalt, and Bosch Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…
This model has been remixed to fit a Ridgid NXT 2.5" hose (2.25" OD at connector) to a DeWalt Sliding Compound Miter Saw - specifically model DWS780 but it will fit other models. Chamfers have been added to the vac locking mechanism and…
RIDGID Tools Double 18V Battery Holder Double battery holder for RIDGID 18V Batteries. Simple battery holder for storage of your RIDGID batteries while not in use. This is a flat mount holder that requires external mounting screws. May…
Battery holder for Ridgid cordless drill batteries. Fits the 18v, possibly others. May fit other battery brands as well. See included profile.
This Ridgid Tool Holder can be mirrored to face your tools to the left or to the right. I hold everything from simple little routers to ½ inch impacts, grease guns, or anything that is heave. All work just fine. I printed it with CF-PETG…
OnePlus 13 - Ridgid Style Phone Case, the case extends past the screen and camera lenses to protect the from scuffing when places on flat surfaces. further more it has a pronounced ridge on the back for better grip. Warning can be…
This allows adding a second 2.5 inch dust port onto my Rigid sander. This better matches the airflow requirements for my 4 inch dust collector. If you see my 4 inch PVC dust collector project I have a splitter to go from 4 inch to two 2.5…
Originally on Thingiverse but moved over. A few remixes still available on Thingiverse. Please do not sell these on Etsy/EBay/Facebook without arranging with me prior. I'm open to use but many people are not attributing it back and this…
Trays, dividers and labels to fit the Ridgid Pro Gear 2.0 Drawer toolbox. Should also fit Keter, Magnusson and other rebrands. You'll probably need to print the divider on the diagonal, and the trays standing up at 45 degrees with some…
I had problems with the fan shroud, so I needed a directional overhang / curling test. It will test overhang at four angles (30 to 60°) in all directions for curling issues bridging at 30, 50 and 70mm arcs at 2.5, 5 and 7.5mm radius (5,…
Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…
Added bridging supports at the intersections of Doug Kremer's EXTREMELY LIGHT Gridfinity Baseplate (Parametric). This fixes the drooping seen in the 3rd picture. For the Fusion360 file, change the size of the grid with: Update Row and…
Longer bridging test pieces to test out the limits of your machine. Dialing in just the right bridging settings can reduce the need for support structures in 3D prints and thus reduce print time and material use. Keep in mind that the…
Saw a video regarding the perfect bridging printing of the mushroom basket from @akakikuu... This inspired me to design a bridging test model... That is how I came out with this "bridging statue"... By rotating this bridging statue... you…
There are so many bridging test models out there already - why did I make another one? I couldn't find one that met all these criteria: The model should test bridging in both X and Y directions, testing each axis with the same range of…
Stops doors closing....!!! Print instructions 20% + infill at 0.2 layer height is fine.
Update 2024-4-29: I've uploaded a pair that have minimal supports. I really don't recommend using them, as the models with the built in supports have been fine tuned over dozens of test prints to provide the best printability and most…
My kid wanted a mini mushroom pal. I had some MX Cherry switches and figured I could combine the two. I printed with Inland Marble PLA with mostly stock settings. I added a perimeter so I could make it hollow and amplify the noise of the…
UPADED: 2023-05-07 New support settings that seem to work better. Noted below, in the picture and in the new 3mf file "Ridgid Drill-Driver bit holders-Spt v2.3mf" UPDATED: 2023-04-29 I have reworked the bit holders after someone commented…
We wanted to create a garden around our letterbox but was surprised to see the cost of garden edging from our local stores, after some modelling we came up with this which turned out to be about ⅓ the cost (filament only) of the store…
A small bridging test with very little material
This is a combination of my own creations and originals so I could store batteries, Tool heads and charger on the ceiling above my bench. They will also work on the wall. Allows for storage with or without batteries attached, spare…
https://www.thingiverse.com/thing:3830316 presented a project to adjust Purging Volumes and provide smaller wipe towers with less waste. jltx did a great job on explaining how to use the tool. I also wanted a tool to test my bridging…
One of the biggest complaints in the woodworking shopvac world seems to be hoses, connectors and adapters. My dad wanted a set of connectors for his 2.5" setup, and this is the result. Ridgid hoses have stupid sizes. And they don't fit…
This is a remix of DysonOBI from TeachingTech. It allows a Ridgid Battery Adapter from Amazon to be affixed to the Dyson V7 or V8 vacuum. It may fit others. You will need the following: -Ridgid AEG 18V Hyper li-ion Battery DIY Dock…
RIDGID 18V Drill Holder Upside-down Position Perfect wall mounted storage for almost any of your 18V RIDGID battery powered drills and drivers. This mount may fit other makes as well. Remixed - Removed excess holes from base plate, added…
I liked the edits on the featherboard done by r00nee, but the miter bars didn't fit in my Ridgid table saw miter slots, so I edited in order for them to fit. While I was at it, I changed the bottom of the bar to hold either 1/4-20 Hex nut…
This is a part to replace the small block that the fence uses to clip the guide fence to the saw table. And, greatly improves the repeatability of maintaining square when the fence is moved to a new dimension.
I designed some brackets to hold a work bench/plywood on top of my Ridgid pro gear drawers or large tool box. I used washers and some small drywall screws (I will add the size here later). Unfortunately, this version will not lock on top…
This was 2nd foray into into more dedicated sculpting. This is a little budgie based on a few birds I follow online. He's very cute! Print with no supports, works great with PLA or PETG
Wanted to hang my small parts box from the side of my tool box. I have printed, tested and works well. Print 2 of them, there are other options out there, but I wanted something that was simple to print, and to keep the print minimal.…
I've been using @Maker Mashup's nozzle brush for a while, and recently I saw @Extra Fox's remix of it. I liked the smaller size of the head but I didn't care for the repositioning of the handle to the side or the rounded handle that lost…
I've created variants for 0.2 and 0.3 mm layer height. 0.2 mm version is sliced at 3.22 grams. 0.3 mm version is sliced at 4.06 grams. The original BridgingTestMaterialSaving.3mf is sliced at 5.47 grams. There are four layers above the…
I've made a simple Bridging Test. 1st Bridge 18mm, 2nd 28mm, 3rd 38mm, 4th 48mm, 5th 58mm, 6th 68mm.
Use this to test and dial in various bridging settings.
This is a double helix bridging torture test. you can scale it up or down to increase the length of the bridge. you can also filament swap to test bridging capabilities of multiple filaments in one print! designed in fusion 360 featured a…
This is a test to see how far your bridging can go. The numbers do not show on a 0.4mm nozzle. If using it, I would keep a careful eye on your print, as it could turn to string by the end when the bridging starts to fail (Mine made the…
This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…
Ridgid, Erbauer, JCB, AEG, Keter, Magnusson modular pro tool boxes ridgid pro gear case bin lid. Not compatible for use in the clear top organizer. Works best if you take the inner lining out of the lid on the 22inch tool box from system…
UPDATE!!! I've added a new version which, when printed in TPU/FLEX material, allows you to pull the cord off without unwrapping it! Print the V3 version in flex, and the crate accessory lock in PETG! Cord Wrap for Ridgid Pro Gear system…
This is an adapter to use Makita 18V batteries in AEG (Ridgid) tools. This adapter uses geniune Makita terminals pad (such as 643852 or 643838). If you don't have it - either purchase it, or print/make it yourself - see…
simple cord wrap for the side of ridgid progear system 2.0 tool boxes, medium and large. May work on others as well.
I really liked the concept of a relative temperature tower that supports any material, but I also wanted to be able to change the layer height/nozzle size easily, so I rewrote the layer change G-code to be layer-independent.…
This cute little calibration cube-variant can be printed in ~20 minutes and provides a bed adhesion, bridging, and dimensional accuracy test. Plus, they stack and make for great filament swatches! Each side of the main cube is 20mm. The…
This is 61mm x 40mm
This is an adapter that will allow you to connect a Black and Decker random orbit sander to a 1-¼ Ridgid shop vac hose. I modeled this to connect to my Black and Decker BDER0600 5 inch random orbit sander, but there's a good chance it…
This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…
Quick way to test your bridging capabilities and re-calibrate/tune your printer in minutes. Say NO to fancy complex models that take 30+ minutes to print, this one prints in 5 minutes!
For large enough printer, just use the body_full and the two nob parts. For smaller printer, you will have to print the body as two parts and then connect them using 3 copies of the insert. Use glue if you want to make it permanently. For…
The problem I had is that the supports didn't allow for a surface finish that I liked. This Model has integral supports, that need to be popped off when the print is done. Before assembly. I optimized the design for printing in a specific…
I wanted to have nice connectors for the extension of my MK3's PSU cables without having to tear down the entire cable harness. Since there were no proper screwing terminal blocks available out there, I did it maker style and designed my…
This simple design has a female end that receives the standard male hose end. I designed it so that there is no need for printed supports, and so that the print flow increases the strength of the printed model. There is also additional…
Temp Tower for C1L
This is precisely sized to snap securely on the back of the brushless driver. I recommend using PETG or PLA+ for durability and to avoid cracking due to the tight fit. The basic version will hold bits without magnets or a base. It does…
Mounts to the sides of the Ridgid pro gear modular large tool box. Presses in nicely for a firm fit or can also be screwed in. Just a basic starting point so that people can remix and design their own accessories for it. At least 2…
RIDGID - 2.0 Pro Gear System 22 in. Compact Tool and Small Parts Organizer Nesting Cups This the smallest of the Ridgid organizers. These trays divide the top half of the cups into 2,4,6 and more sections for organizing while still having…
This is a Track Square I designed to work with the New 18v Ridgid Track Saw (R48630B). You will need to get some ¼-20 T-track bolts; I will link to the ones I used. I also used m3xm6 heated inserts with m3 screws to attach the bottom. And…
Have a few jigs and sleds for my table saw and got tired of making them out of wood and having to fine tune them. This fits the miter bar slot in my Ridgid R4512 perfectly. Uses a 1/4x20 nut and can be secured to whatever jig you're…
